Used Agie Challenge 3 for sale (96)

Year of construction: 2000, Condition: refurbished (used), AGIECUT Challenge 3 Zi80Md0 Travels: X= 500 mm, Y= 350 mm, Z= 256 mm travel U/V-axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.3 µm Average contour tolerance Tkm +/- 5 µm Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable setup Including AGIESETUP 3D AGIEVISION Control AGIE HSS Generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg Including 6 months warranty; On request we can put the machine into operation and carry out a training on site.

Year of construction: 2006, Condition: refurbished (used), AGIECUT Challenge 3 eCut Year of construction 2006 Travels: X= 500 mm, Y= 350 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D AGIEVISION control unit AGIE generator with eCut technologies for faster and more efficient processing Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and thoroughly tested by us after receipt of the order. Ygweo We then put the machine into operation on your premises. You receive a 6-month warranty on the machine. We are happy to offer you the following additional services: - Control and maintenance training - Cooling unit - Programming system - Consumables - Clamping devices - Transportation

Condition: ready for operation (used), Year of construction: 2005, Pallet changer TOOLPAL 3 R 12 compartment Pvghvkhnnj

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, Machine/vehicle number: 360, Travel distance X-axis: 500 mm, Travel distance Y-axis: 350 mm, Travel distance Z-axis: 500 mm, Workpiece weight (max.): 800 kg, TECHNICAL DETAILS Dpswsh Travel X / Y / Z: 500 / 350 / 500 mm Rotation: 0 - 60 rpm Table dimensions: 800 x 600 mm Automatically lowerable container: 200 - 700 mm Workpiece weight: 800 kg Internal dimensions of work bowl: 1,090 x 730 x 490 mm MACHINE DETAILS Weight: 5,000 kg Installation dimensions: 3,200 x 2,400 x 2,700 mm Operating voltage: 3 x 400 V Frequency: 50 Hz Connection: 8.3 kVA Rated current: 12 A

Condition: used, Year of construction: 2005, AGIECUT Challenge 2 eCut Year of construction 2005 TECHNICAL DETAILS X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 256 mm U/V axis: ±70 mm Cone angle: 30°/100 mm Cjulhz7Ive Cutting rate: > 300 mm²/min Quality: Ra 0.1 µm Thread height: 250 mm Tapping die: 1/2 mm Wire diameter: 0.1 - 0.33 mm Workpiece height: 250 mm Workpiece width: 550 mm Workpiece length : 750 mm Workpiece weight with/without bath: 200 / 450 kg MACHINE DETAILS Bath size : 700 l Dimensions : 2215 x 2215 x 2220 mm Net weight : 3600 kg

Condition: good (used), Year of construction: 1998, Working area 500 x 350 x 250 (L x W x H), available with extensive accessories if required! Eroding wire 0,25mm - 10 pieces new spools available Filters and resin cartridges available Please contact us if you are interested ! Habemngx

Condition: good (used), Year of construction: 2004, Operating hours: 35,500 h, Functionality: fully functional, Travel distance X-axis: 500 mm, Travel distance Y-axis: 350 mm, Travel distance Z-axis: 426 mm, Equipment: Cooling Unit, A G I E (Switzerland) CNC - controlled wire erosion machine Cwyavrrc Type AGIECUT PROGRESS V 3 year of construction 2004 Eroding hours: 35200h Travel (X/Y/Z) 500 x 350 x 426 mm Max. Part size for clamping (X/Y/Z) 1050 x 650 x 420 mm Max. Workpiece weight (with / without bath) 400 / 800 kg Taper +/- 30°, 100 mm Travel paths U-/V-axes +/- 70 mm Available wire diameters 0.20 - 0.33 mm Best achievable surface Ra 0.3 µm Cjobewsybk Max. Cutting capacity 500 mm²/min Machine dimensions (mm) 1940 x 2300 x 2600 mm 8D38A00F2A Separate dielectric tank Cooling unit type included Machine can be inspected under power. It currently has no defects and is still being worked on.

Condition: good (used), Year of construction: 2003, Operating hours: 22,800 h, Workpiece weight (max.): 50 kg, Travel distance X-axis: 500 mm, Travel distance Y-axis: 350 mm, Travel distance Z-axis: 500 mm, Distance table to quill: 700 mm, ErowaITS c axis 52 Changer Cg8Wlsl8No

Condition: used, Year of construction: 2007, table length 500 mm table width 350 mm ampere 65 A Control AGIEVISION 5 CNC total power requirement 20 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m A G I E (Switzerland) CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007 Working range, X Y Z (=height) 500 x 350 x 426 mm Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm Resolution of axes 0.0001 mm Speed for positioning the axes up to 3 m/Min. Tolerances (If machine is new) 4 µ Workpiece dimensions, L x W x H max. 1.050 x 650 x 420 mm Max.weight of workpiece with/w.o. Dieelektricum 400/800 kg Clamping System Universal Beams with fixing holes Cutting wire Ø 0.2 – 0.33 mm Size of wire roll up to 25 kg Cutting speed of wire 60 – 300 mm/s. Total electrical load, approx. 20 kW - 400 V - 50 Hz Weight, approx. 4,000 kg Dimensions of machine approx. 2.4 x 2.2 x 2.4 m Bttfjq97Bi Accessories / Special Features • AGIEVISION 5 CNC Path Control for 5 Axis with OS 2 Machining Version and With various subprogrammes for a easier and faster designing of machining programmes, Technology devices, PP 123 Agie Geometric helps, DNC-Connection,Graficheck in 2 D a. 3 D, Rethreading of wire when wire is cutted-off, Optimizing the programmed pathes, PURECUT for reduction of Oxidation on workpiece surface,10 various program-languages, and many more features. • Mobile electronic hand held control unit for manual adjustments and set-ups for new workpieces, and separate standing control panel with CD-recorder and large monitor. • “DA” PROGRESS integrated Dieelectricum Aggregate with chiller and Filtering System, large tank incorporated in machine’s basement, Koax flushing, • AGIE Generator with 65 A Capacity and cutting performance up to 300/450 mm² • AGIE Automatic Wire Threading System with wire shredder and container mounted in backside of machine. Condition : Very good. The machine comes from a first class tool and die shop. It has been kept in very good order and was regularly maintained. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: refurbished (used), Year of construction: 2008, AGIECUT Challenge V3, Year of manufacture 2008 Travels: X= 500 mm, Y= 350 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D AGIEVISION 5 control unit AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine has been cleaned, overhauled and extensively tested. Incl. user training at Techma on the overhauled machine Incl. 6 months warranty Dpfghh Optional: transportation, commissioning, training, cooler

Condition: ready for operation (used), Year of construction: 2000, Operating hours: 17,900 h, Functionality: fully functional, Workpiece weight (max.): 800 kg, Travel distance X-axis: 500 mm, Travel distance Y-axis: 350 mm, Travel distance Z-axis: 256 mm, TECHNICAL DETAILS Travel X / Y / Z: 500 / 350 / 256 mm Travel U / V: ± 70 mm Taper angle / height: max. 30° / 100 mm Workpiece dimensions: 1,050 x 650 x 250 mm Workpiece weight immersed/not immersed: 400 / 800 kg Dielectric volume: 1,000 l Pre-deionized water: 10 µS/cm Filter/medium: 4 canisters with 4 filter cartridges Deionization resin volume: 10 l Deionization: 1 - 25 µS/cm Rapid traverse: X, Y / U, V, Z: 900 / 600 mm/min Drive: brushless AC servomotors Positioning accuracy X / Y: 4 µm Position spread X / Y: 1 µm Cg72Lj0Fum Positioning accuracy U / V: 5 µm Position scatter U / V: 2 µm Threadable height: max. 250 mm Threading nozzles: 2 / 1 mm Wire diameter: 0.03 - 0.33 mm Toroidal guide: 2° - 30° Wire spool: max. 25 kg Wire tension: 0 - 25 N Wire speed: 60 - 300 mm/s Wire feed: semi-automatic Wire removal: Chopper MACHINE DETAILS Dimensions: 2,800 x 2,400 x 2,200 mm Net weight: 4,500 kg Working weight: 6,000 kg Connected load: 10.5 kVA Operating voltage: 3 x 400 V ± 10%

Condition: used, Year of construction: 1995, Functionality: unexamined, Machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Sfp2Cgeteh

Condition: ready for operation (used), Year of construction: 1998, Movement X-Axis Movement 500 mm Y-Axis Movement 350 mm Z-Axis Movement 500 mm Table Outer length 800 mm Outer width 600 mm Table load 800 kg Bgu2Hjkb8Kx This AGIE AGIETRON INTEGRAL 3 EDM Wire Cutting Machine was built in the year 1998. The machine has a table of 800 x 600 mm. Application Types EDM

Year of construction: 2019, Condition: ready for operation (used), X-travel: 600mm, y-travel: 500mm, z-travel: 540mm, max. distance-table: 690mm, feed: 40m/min, table dimensions: 700x500mm, max. workpiece weight: 800kg, controls: Heidenhain TNC 620, connected load: 18kVA, length: 2240mm, width: 3338mm, height: 2803mm, weight: 5.6t, with documentation, has not run much. Fzgzzvo

Year of construction: 2005, Condition: good (used), AGIECUT Challenge 2 e CUT Year of manufacture 2005 8Irnokp0Fk operating hours: 100009 eroding hours: 34444 traverse paths (X/Y/Z): 350 x 250 x 256 mm Travel (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Best achievable surface: 0.2 µm Ra Max. Cutting rate in cylindrical cut: 300 mm²/min Available wire diameters 0.15 - 0.33 mm Other services included: Disassembly and loading of the machine. Guarantee and warranty: Guarantee on function with acceptance workpiece is given. No warranty on technical machine parts!

Year of construction: 2008, Condition: refurbished (used), AGIECUT Challenge V2, Year of manufacture 2008 travels: X= 350 mm, Y= 250 mm, Z= 256 mm travels U/V-axis: +/- 70 mm maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg (in bath / without bath) Achievable surface quality: Ra: 0.2 µm Zy9Ww Average contour tolerance Tkm +/- 2-3 µm Available wire diameters: 0.15 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable set-up AGIEVISION 5 control system AGIE IPG-V generator AGIESETUP 3D Dimensions (length x width x height): 2215 x 2215 x 2220 mm Net weight: 3600 kg The machine is cleaned, overhauled and tested by us after receipt of order. After completion, you will receive training from us at our premises on your machine. Afterwards the machine is prepared by us for the transport. Optionally we can offer you the following: - Transport - commissioning - cooling unit - CAM software

Condition: used, Year of construction: 1995, Functionality: unexamined, Machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Golz3C

Year of construction: 2008, Condition: refurbished (used), AGIECUT Challenge V3, Year of manufacture 2008 travels: X= 500 mm, Y= 350 mm, Z= 256 mm travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Dowclbix3X Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable set-up Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and extensively tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transport, commissioning, training, cooler

Condition: refurbished (used), Year of construction: 2006, Functionality: fully functional, AGIECUT Vertex 3 Year of construction 2006 Travels: X= 500 mm, Y= 350 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 - 0.33 mm Water bath machine with automatic wire threading Q2Xcpwvxcz With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D AGIEVISION 5 control unit AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine has already been completely cleaned, overhauled and extensively tested. We would also be happy to carry out an individual test on the Vertex 3 for you. Incl. user training at Techma on your overhauled machine We are happy to offer you the option of - transportation - commissioning - Cooling unit - Clamping devices - Consumables

Condition: refurbished (used), Year of construction: 2004, Functionality: fully functional, AGIETRON Hyperspark Exact 3 Year of manufacture 2004 Die-sinking EDM machine in C-frame design with lowerable work bowl Doezlr Travels (X/Y/Z): 500 x 350 x 500 mm distance table quill: 200-700 mm max. workpiece size: L x W x H = 1070 x 530 x 350 mm max. workpiece weight: 800 kg Integrated C-axis, for rotation, indexing and erosion (U=0-60 rpm) Incl. 28-fold electrode changer Pneumatic chuck of your choice (Erowa/3R Systems) Equipped with AGIE IPG high-performance generator Net weight of the machine: 3900 kg Machine dimensions: 2855 x 2135 x 2965 mm The machine is cleaned, overhauled and tested by us after receipt of order. We are happy to offer you commissioning and training.

Condition: refurbished (used), Year of construction: 2005, Functionality: fully functional, AGIECUT Challenge 2 eCut Year of construction 2005 Travel (X/Y/Z): 350 x 250 x 256 mm Travel (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface: 0.2 µm Ra Bc88Gnuums Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Incl. AGIE JOGGER handbox Incl. console with USB connection The machine is cleaned, overhauled and tested by us after receipt of the order. We are also happy to offer you commissioning and training.

Condition: refurbished (used), Year of construction: 2004, Functionality: fully functional, AGIECUT Challenge 2 eCut Year of construction 2004 Travel (X/Y/Z): 350 x 250 x 256 mm Travel (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface: 0.2 µm Ra Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Incl. AGIE JOGGER handbox Incl. console with USB connection The machine has already been cleaned, overhauled and tested by us. We would be happy to carry out a test cut for you on site. Optional: - Commissioning - training - Transportation Dobied - Cooling unit - Clamping device

Condition: refurbished (used), Year of construction: 2003, Functionality: fully functional, AGIECUT Excellence 3 Bld0Eyzx3Fs Year of construction 2003 Travels: X= 500 mm, Y= 350 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.10 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D AGIEVISION control unit AGIE IPG generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and thoroughly tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transportation, commissioning, cooler

Year of construction: 2005, Condition: refurbished (used), AGIECUT Progress 3 Year of manufacture 2005 travels: X= 500 mm, Y= 350 mm, Z= 426 mm travels U/V-axis: +/- 70 mm maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.30 µm Maximum cutting rate: 500 mm²/min Glass scales on X- and Y-axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage Maximum threadable height: 420 mm With manual front door (accessible from 1 side) Incl. AGIEJOGGER- hand box for comfortable set-up AGIE IPG high performance generator AGIEVISION control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Iujpkuzfc Net weight: 3460 kg The machine will be overhauled and extensively tested by us You get 6 months warranty on the machine. We are also happy to offer you commissioning and training

Year of construction: 2010, Condition: excellent (used), AgieCharmilles Mikron HSM 400U Gxb77Hy