Wire EDM machine

AGIE Challenge 3 eCut

Condition: new, Year of construction: 2016, 1 unit of a completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815. All gearbox parts have been replaced, with the exception of the housing!!! Clutch: 800 mm (only one half available) Maximum torque: 27,829 Nm Bdsdsgwlrdopfx Aknjh Gear ratio: i = 1:80 Maximum power: 51 kW Oil capacity: 170 kg Speed: n1 = 1400 Speed: n2 = 17.5 Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Overall height h2: 925 mm Length of base: 1170 mm !! The gearbox does not have an oil cooler !!

Year of construction: 2002, condition: not inspected (used), Robot no control panel + connection cables Bdjdpfx Aksgu U Itonsh Used, untested robot. No technical documentation available. Not tested.

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000X Year of manufacture: 2021 Travel distances: X= 500 mm, Y= 350 mm, Z= 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Bdjdpfsych Rzjx Aknoh Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Submerged-type machine with automatic wire threading With automatically lowering work tank (accessible from 2 sides) Incl. AGIEJOGGER handbox for convenient setup Incl. AGIESETUP 3D Incl. automatic wire changer AWC (use of 2 wire spools) Incl. Conic-Plus option Incl. Fast-Threading option Incl. Smart-Threading option VISION 5 control system AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be fully cleaned, overhauled, and thoroughly tested after receipt of order. We conduct laser measurement of the axes at our premises. On request, we are also happy to carry out a custom test on the CUT 3000 for you. Includes user training at Techma on your overhauled machine We are happy to optionally offer: - Transport - Commissioning - Chiller unit - Clamping devices - Consumables

Condition: used, pressure 160 t passage width / mm stroke / mm Working height 800 mm total power requirement 15 kW weight of the machine ca. 11,8 t - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm Bedpfsiulkqox Aknjdh extra information Removable table

Year of construction: 2016, condition: ready for operation (used), Offered is a high-precision worm and thread grinding machine MIKROMAT 20G, used as a test and trial machine, nearly all available options included, technically flawless condition. Capabilities: external thread grinding, internal thread grinding, whirling Whirling, grinding length max. 2000mm, workpiece diameter max. 320mm, distance between centers: 2250mm NC tailstock option: 2050mm, workpiece weight max. 200kg 350kg NC tailstock, pitch range: 0-400mm, 7-axis system, feed speed: up to 15000mm/min, setting angle: +/-40°, positioning accuracy: uncertainty 0.0024mm P, upgrade to 23.5kW continuous power/45kW maximum power, grinding wheel speed: up to 50m/s, special equipment internal grinding: internal thread diameter up to 100mm, length up to 50mm, coolant system: KNOLL compact unit vacuum rotary filter, 2500l tank volume and oil cooling, installation dimensions X/Y/Z: approx. 6500mm/4000mm/3000mm, total weight: approx. 13000kg, inspection possible by arrangement. Bdodpfxjylbr De Aknjh

Condition: excellent (used), Year of construction: 2012, Equipment: chip conveyor, Spinner U5-1520 5-axis machining center Control system: Heidenhain 620 Year of manufacture: 2012 Table dimensions: 2-part – fixed 920x540 mm / rotary round table 650x500 mm (with enlarging ring) Travel in X-axis: 1,520 mm Travel in Y-axis: 520 mm Travel in Z-axis: 420 mm Spindle mount: ISO 40 Spindle speed: 12,000 rpm Automatic tool changer: 32 positions Spindle motor power: 15 kW Net weight approx.: 10,000 kg Accessories: Internal cooling system with paper band filter Bsdpfx Akeztv Ihjnsdh Chip conveyor Handwheel

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: TH241-14/433886, operating hours: 131 h, ABUS ELV crane system crane runway bridge crane indoor crane crane Load capacity / lifting capacity: 5t - 5000 kg Gauge: 13,500 mm, overall width approx. 13,700 mm Year built: 1999, with floor control Lifting height: 6 m Overall height from crane top edge to hook approx. 1,020 mm (Girder: 540 mm + lifting gear: 480 mm) Bdodpfxsx Ev Tks Aknoh End carriage length with buffers approx. 270 cm SWP: Full load hours used: 131, theoretical remaining service life: 1,469 hours Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipment by freight forwarding possible, please inquire with postal code Collection preferred

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Dear Mr./Mrs, we have opportunity to offer you PLATEG plasma (ion) nitriding equipment. Chamber is with hot wall. Equipment is in excellent condition, fully functional, without any problems, ready for use. Equipment characteristic: - Dimensions of construction: 2700 mm x 1250 mm x 800 mm - Dimensions of chamber: Diameter 1000 mm x 1200 mm - Maximum dimension of nitriding batch: Dimeter 900 mm x 900 mm - Total equipment power: 70 kVA - Power of heaters: 30 kW - Power of plasma supply (BIAS): 30 kW - Plasma supply is unipolar, voltage 0-1000V, current 0-60A, DC to 33 kHz, pulse on and pulse off adjustable - Plasma supply (BIAS) is only one year old, bought from Germany (El Connect company) Bodpfsvfm I Hsx Aknsdh - Vacuum pump: Pffeifer vacuum 65 - Vacuum system is controlled by new electrical cabinet with PLC and HMI - 4 MFC for dosing gasses - Plasma nitriding process, post oxidation process Company Planit is also giving assembly services of this equipment, maintenance manual, user manual, technology (nitriding and oxidation) and also service. For any question, don't hesitate to ask. Best regards.

Year of construction: 1995, condition: used, pressure 125 t stroke 10-80 mm no. of strokes 240 Hub/min ram - range of adjustment 80 mm Bsdpfslp U Nqsx Aknedh table surface area 850x600 mm ram surface 760x550 mm hole in the table 850x130 verstellbar mm table height 1100 mm tool hole in ram Ø 50 mm total power requirement kW weight of the machine ca. 13 t dimensions of the machine ca. BxTxH: 3000x2000x3300 mm

Condition: reconditioned (used), CNC vertical machining center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of construction: 2010 Travels: X 635 Y 510 Z 460 Speed range: 20 - 8,000 rpm infinitely variable With the following accessories: Rigid angled table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Heidenhain TT 140 tool length measuring system Fully protected cabin with sliding doors and interior lighting Coolant device Signal light 4 colors Chip conveyor Chip flushing gun 3 pcs. Height-adjustable machine shoes Bsdpeuqmvkefx Aknsdh Operating instructions