Extinguishing water tank 25.000 liters water tank

Year of construction

2001

Condition

Used

Location

Warstein

Extinguishing water tank 25.000 liters water tank

Machine data

Machine type:: Extinguishing water tank 25.000 liters water tank

Year of construction:: 2001

Condition:: used

Price & Location

Location:: Enkerbruch 2, 59581 Warstein, Deutschland

Call

Details about the offer

Listing ID:: A2990741

Update:: 23.05.2024

Description

Tank-& Umweltschutz Wozniack Specialist company according to the Water Resources Act

Dear Sir or Madam, we offer a 25.000 liter storage tank for the storage of water and waste water as follows . This is a 30 cbm storage tank made of steel.
Material S235JRG2 steel .
Including manufacturer's certificate DIN and nameplate.

The tank is cleaned from the inside and bitumen insulated from the outside.
Suitable for underground as well as above ground storage.

Tank dimensions :
Length : approx. 8.390 mm Diameter : approx. 2.000 mm Weight : approx. 4.500 kg

Shape : cylindrical

Equipment : on request

Dodpfxjc Nkyzo Af Rsuu

For the use as extinguishing water tank additionally a
suction line with A-fixed coupling according to DIN can be offered.

Of course, you can also co-design your tank system!

All our plants are extensively controlled and checked in our company by selected employees.

We also offer an inexpensive delivery on request.

The inspection of our plants is possible at any time.
Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises.

Could we convince you of our offer?

If you have any questions or requests, just give us a call, one of our experienced employees will be happy to advise you.

General:

All offers are valid ex location Warstein , free loaded.
Delivery can be offered at a reasonable price for an additional charge.
Delivery time = immediately

You will receive an invoice with VAT.

In addition, we buy existing tank systems and can, as an approved specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle and transport them away.

With kind regards
from Warstein

Tank and environmental protection Wozniack
Enkerbruch 2
59581 Warstein

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2015

35 listings online

Call

Send inquiry

Telephone & Fax

+49 2902 ... show

Fax:

These listings may also fit your interest.

Auction

Hessen

7,806 km

Reach truck
StillFM-X14

€5,600

To the auction

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P21902N92695, Year of construction: 2024, operating hours: 87 h, load capacity: 1,400 kg, lifting height: 7,100 mm, fuel type: electric, power: 6.5 kW (8.84 HP), empty load weight: 2,371 kg, Used reach truck with only 87 operating hours! TECHNICAL DETAILS Load capacity: 1,400 kg Duodpfx Asy Uy Ahef Rsu Lifting height: 7,100 mm MACHINE DETAILS Fuel type: electric Power: 6.5 kW Battery voltage: 48 V Operating hours: 87 h Unladen weight: 2,371 kg EQUIPMENT Battery Charger

See details

Listing

Saw-Blade Sharpening Machine WINTER SBS 8-70

Leipzig

7,966 km

Saw-Blade Sharpening Machine
WINTERSBS 8-70

€250

Fixed price plus VAT

Call

Auction

Horizontal machining center OKUMA MA-600HB

Denmark

7,646 km

Horizontal machining center
OKUMAMA-600HB

€19,000

To the auction

Condition: ready for operation (used), Year of construction: 2005, operating hours: 44,673 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller model: OSP-E100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 320, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on schedule in week 30 of 2026! TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 900 mm Z-axis travel: 900 mm Spindle speed: 12,000 rpm Tool holder: BT50 Tool positions: 320 Tool positions for 600 mm tools: 80 Part accuracy: 0.001° MACHINE DETAILS Control system: OSP-E100M Number of axes: 4 Coolant pressure: 30 bar Operating hours NC cycle time: 71,235 h Spindle running time: 56,241 h Machining time: 44,673 h Dedpfjy S T Rtjx Af Rouu EQUIPMENT ATC with 320 positions 80 positions for 600 mm tools Balluff writing/reading system NC table Absolute scales in X, Y, and Z Renishaw MP10 measuring probe Tool breakage monitoring MOP tool monitoring 30-bar coolant system Mayfran Consep 2000 chip conveyor

See details

Auction

Universal machining center Deckel Maho DMU 80 P Hi-Dyn

Nordrhein-Westfalen

7,686 km

Universal machining center
Deckel MahoDMU 80 P Hi-Dyn

€15,000

To the auction

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 430, workpiece weight (max.): 800 kg, The machine was recently inspected by a technician, and the following minor repairs were carried out: New cable routing, replacement of the display, and replacement of the sensor cable for the tool changer. TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 700 mm Travel range Z-axis: 600 mm B-axis: Automatic swivel milling head C-axis: NC rotary table (dimensions: 900 x 630 mm) Tool holder: SK40 Dusdpfxoy Szq Us Af Rsu Number of tool changer positions: 60 Maximum workpiece weight: 800 kg MACHINE DETAILS Control model: Heidenhain 430 EQUIPMENT Chip conveyor Internal cooling system (40 bar operating pressure) Handwheel Heidenhain TS 642 probe

See details

Listing

Hot Air Heatings Ewi-Therm Optimal-E 6, 170kW

Winnweiler

7,822 km

Hot Air Heatings
Ewi-ThermOptimal-E 6, 170kW

Call

Condition: new, Year of construction: 2026, Size: 6 Nominal heat output: 170kW Dujdpfx Afjdlhdbo Reu -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms of: 4.800 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 40 - 50 kg/h Blower air capacity, free blowing: 14.000 m³/hour Outlet opening: Ø 700mm Flue pipe connection Ø 220 mm Weight: 2.150 kg SPS control cabinet: 380 Volt

See details

Auction

Injection molding machine KraussMaffei KM 950-17200 MX

Województwo dolnośląskie

8,237 km

Injection molding machine
KraussMaffeiKM 950-17200 MX

€40,000

To the auction

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 120 mm, ejector stroke: 300 mm, opening stroke: 1,900 mm, TECHNICAL DETAILS Dusdpfx Afjy T H A Es Rou Clamping force: 9,500 kN Opening force: 665 kN Tie bar distance: 1,400 x 1,150 mm Clamping plates: 1,960 x 1,710 mm Opening stroke: 1,900 mm Min. mould height: 500 mm Max. mould height: 1,200 mm Max. opening width: 2,400 mm Ejector stroke: 300 mm High-performance screw HPS-UN, diameter: 120 mm Nozzle radius: 30 mm Nozzle opening: 12 mm Screw diameter: 120 mm Shot weight (HDPE): 5,420 g Shot volume: 7,634 cm³ Specific injection pressure: 2,257 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,770 x 3,420 x 2,750 mm Machine weight: 61.5 t

See details

Auction

Injection molding machine DEMAG System 800/1120-9500

Województwo dolnośląskie

8,235 km

Injection molding machine
DEMAGSystem 800/1120-9500

€39,000

To the auction

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 130 mm, ejector force: 139,000 N, opening stroke: 1,030 mm, plate width: 1,500 mm, plate height: 1,620 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Plate size (h x v): 1,620 x 1,500 mm Clear width between tie bars (h x v): 1,120 x 1,000 mm Mold height: 500 - 1,050 mm Maximum plate distance: 2,080 mm Opening stroke: 1,030 mm Ejector stroke: 350 mm Ejector force: 139 kN Mold weight: 7,200 kg Injection system Djdpjy T Hz Iefx Af Rjuu Screw diameter: 130 mm Displacement: 7,300 cm³ Injection weight (PS): 6,640 g Injection pressure: 1,300 bar Screw length: 20 l/d Electrical and hydraulic equipment Rated power of pump motor: 110 kW Heating power: 79 kW Oil tank capacity: 1,300 L MACHINE DETAILS Machine dimensions LxWxH: 12.3 m x 2.7 m x 2.7 m Total weight: 33,500 / 9,700 kg

See details

Listing

Crawley

7,245 km

Submersible pump
Atlantic PumpsJSTSK

Call

Condition: excellent (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 229404, overall weight: 50 kg, power: 2.8 kW (3.81 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 4 A, Purchased and installed. Found to be too strong so removed. It has been used a total of 10 minutes. 1250L/min 3 Phase Max head. 20m IP68 Dujdpferqgauox Af Rsu

See details

Auction

Injection molding machine DEMAG System 1500/1500-16000

Województwo dolnośląskie

8,235 km

Injection molding machine
DEMAGSystem 1500/1500-16000

€69,000

To the auction

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8673 0023, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, plate width: 1,880 mm, plate height: 2,150 mm, Regularly maintained machine - see repair history TECHNICAL DETAILS Clamping force: 15,000 kN Mounting plate dimensions (H x V): 2,150 mm x 1,880 mm Clear distance between columns (H x V): 1,500 mm x 1,250 mm Min./Max. mold height: 700 mm - 1,400 mm Maximum opening distance: 2,900 mm Control: DIAS Injection unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight: 9,880 g Injection pressure: 1,454 bar Electrical and hydraulic equipment Rated power of pump motor: 165 kW Heating power: 97 kW MACHINE DETAILS Net weight with control cabinet: 21,000 t Dodpfx Afoy T Hy Ds Rsuu Dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Electrical connection Main connection: 3 × 400 V, 50 Hz Control voltage: 3 × 400 V, 50 Hz Repair history 2010: New screw with RSP and tube 2015: New Ibed 2015: New wiring board 2017: Motor and pump 2 new 2017: Injection cylinder BS piston rod new with seals 2017: Circulation pump oil cooler replaced 2017: Teachbox replaced (Rob) 2018: Pumps P 1 + 3 replaced (at 65,800 h) 2018: Hydraulic oil change 2019: New injection valve 2019: Dosing inverter overhauled by Fa. Eichler 2021: Motor P1 new 2022: New RSP EQUIPMENT - Wittmann W 753 Robot - 2008 - Cage and conveyor belt

See details

Auction

Injection molding machine ENGEL DUO 11050/2300

Województwo dolnośląskie

8,237 km

Injection molding machine
ENGELDUO 11050/2300

€59,000

To the auction

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,029 h, functionality: fully functional, machine/vehicle number: 51561, clamping force: 2,300 kN, screw diameter: 135 mm, injection pressure: 1,600 bar, opening stroke: 3,800 mm, tool height: 1,890 mm, TECHNICAL DETAILS Clamping force: 2,300 kN Platen size (H x V): 2,900 x 2,500 mm Tie bar distance (H x V): 2,000 x 1,600 mm Dusdsy T Hx Hopfx Af Reu Minimum/maximum mould height: 700 mm/1,890 mm Maximum opening stroke: 3,800 mm INJECTION UNIT Screw diameter: 135 mm Shot volume: 8,870 cm³ Shot weight (PS): 8,071 g Injection pressure: 1,600 bar MACHINE DETAILS Net weight (with control cabinet): 113 t + 18 t Operating hours: 70,029 h

See details

Listing

Hot Air Heatings Ewi-Therm Optimal-E 5, 145kW

Winnweiler

7,822 km

Hot Air Heatings
Ewi-ThermOptimal-E 5, 145kW

Call

Condition: new, Year of construction: 2026, Size: 5 Dujdpfx Aedlhcref Rju Nominal heat output: 145kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms of: 3.800 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 35 - 40 kg/h Blower air capacity, free blowing: 9.400 m³/hour Blow-out opening: Ø 700 mm Flue pipe connection Ø 220 mm Weight: 1.950 kg SPS control cabinet: 380 Volt

See details

Auction

Injection molding machine KraussMaffei KM 420-2700 C2

Województwo dolnośląskie

8,237 km

Injection molding machine
KraussMaffeiKM 420-2700 C2

€9,900

To the auction

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 424227, clamping force: 4,200 kN, screw diameter: 80 mm, injection pressure: 1,829 bar, injection weight: 1,304 g, opening stroke: 1,400 mm, TECHNICAL DETAILS Clamping force: 4,200 kN Platen size (H x W): 1,270 x 1,200 mm Tie bar spacing (H x W): 800 x 800 mm Minimum mold height: 380 mm Maximum mold height: 1,020 mm Max. opening stroke: 1,400 mm Screw diameter: 80 mm Injection volume: 1,433 cm³ Shot weight: 1,304 g (PS) Max. injection pressure: 1,829 bar Max. temperature: 375 °C MACHINE DETAILS Supply voltage: 400 V Phases: 3~ Dujdpfx Aey T Hwijf Rou Frequency: 50 Hz Total current consumption: 237 A Fuse rating: 250 A Pump power: 75 kW Heating power: 36 kW Dimensions & Weight Dimensions (L x W x H): 7.06 x 2.33 x 2.51 m Machine weight: approx. 22,000 kg

See details

Auction

Injection molding machine Arburg 720 S 3200-2100

Województwo dolnośląskie

8,237 km

Injection molding machine
Arburg720 S 3200-2100

€9,900

To the auction

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 198346, clamping force: 3,600 kN, screw diameter: 70 mm, injection pressure: 2,000 bar, injection weight: 984 g, opening stroke: 1,400 mm, TECHNICAL DETAILS Clamping force: 3,600 kN Platen size (H x W): 1,040 x 1,040 mm Column spacing (H x W): 720 x 720 mm Minimum mold height: 300 mm Maximum mold height: 300 mm Maximum opening stroke: 1,400 mm Screw diameter: 70 mm Injection volume: 1,078 cm³ Shot weight: 984 g Injection pressure: 2,000 bar MACHINE DETAILS Electro-hydraulic system Rated power of pump motor: 55 kW Heating capacity: 30.3 kW Net weight with control cabinet: 17 t Dusdpfoy T Hrmjx Af Reu

See details

Listing

Hot Air Heatings Ewi-Therm Optimal-E 3, 87kW

Winnweiler

7,822 km

Hot Air Heatings
Ewi-ThermOptimal-E 3, 87kW

Call

Condition: new, Year of construction: 2026, Size: 3 Rated thermal output: 87kW -- BImSchV stage 2 and CE conform-- Dodpfxedlhbpj Af Reuu combustion chamber completely fireclayed For rooms from: 2.200 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 25 - 30 kg/h Blower air capacity, free blowing: 6.000 m³/hour Blow-out opening: Ø 500 mm Flue pipe connection Ø 200 mm Weight: 1.250 kg SPS control cabinet: 380 Volt

See details

Auction

Injection molding machine Wittmann Battenfeld MacroPower 900/ 8800

Województwo śląskie

8,440 km

Injection molding machine
Wittmann BattenfeldMacroPower 900/ 8800

€99,000

To the auction

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 138337-100, clamping force: 9,000 kN, screw diameter: 105 mm, injection pressure: 1,931 bar, ejector stroke: 300 mm, opening stroke: 2,100 mm, TECHNICAL DETAILS Screw diameter: 105 mm Screw stroke: 525 mm Screw L/D ratio: 22 Theoretical shot volume: 4,545 cm³ Injection pressure: 1,931 bar Maximum screw speed: 167 rpm Maximum plasticizing rate: 151 g/s Screw torque: 8,000 Nm Nozzle travel / nozzle thrust force: 950 mm / 129 kN Injection volume flow rate: 725 cm³/s Injection volume flow rate with double pump (option): 906 cm³/s Air injection volume flow rate with tank (option): 1,812 cm³/s Cylinder heating capacity: 53.9 kW Number of heating zones: 7 Clamping force: 9,000 kN Maximum opening stroke: 2,100 mm Min./Max. tool height: 500 – 1,000 mm Platen size: 1,720 x 1,550 mm Tie bar spacing: 1,200 x 1,000 mm Ejector stroke: 300 mm Ejector force: 165 kN Tool opening force: 300 kN Duodpfx Ajy T Hprsf Reu MACHINE DETAILS Pump output: 90 kW Heating capacity: 53.9 kW Oil tank volume: 1,100 l Dimensions & Weight Machine dimensions (L x W x H): 10,100 x 3,400 x 2,700 mm Weight: 35,200 kg

See details

Advertise here