Wire erosion machine x-travel 400-499mm for sale
Identified location: Ashburn (US) (Edit)
|
7
Kaiserslautern, Germany
dealership location
6526 km
1996
ready for operation (used)
General Data
Measurements width 3040 mm
Measurements depth 2850 mm
Measurements height 3090 mm
Machine weight 5080 kg
Control Unit
Brand Charmilles
Main Drive
Bfuqi7nefe
Working current 64/128 A
Movement
X-Axis Movement 450 mm
Y-Axis Movement 320 mm
Z-Axis Movement 410 mm
Workpiece
Workpiece X 1100 mm
Workpiece Y 780 mm
Workpiece Z 325 mm
Workpiece weight 900 kg
Media
Main electronic connection 380/400 V
This CHARMILLES Roboform 4000 Erosion Machine was built 1996 in Switzerland. It has a... more
|
|
6
Rolle, CH, Switzerland
dealership location
6572 km
2013
ready for operation (used)
about 17'000 WORKING HOURS
Bedymwthxb
–The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change. more
|
|
5
Built in 2001
Generator 70 amperes, multipulse
Control Mitsubishi - 64 bit CNC
Travel (X, Y, Z) ) 525 x 400 x 450 mm
Beoxbjarxt
Working equipment (W x D x H) 750 x 650 x 420 mm
Factory clamping table (W x D) 730 x 630 mm
Electrode changer 20-fold pick-up plate changer
Zubehoer CO2 fire plant,
Integr. Cartridge filter system
Status completely overhauled
x more
|
|
3
table length:397 mm
table width:300 mm
x-axis:300 mm
y-axis:250 mm
z-axis:250 mm
workpiece weight:200 kg
T-slots:3
T-slot - distance:100 mm
T-slot - width:12 mm
connected load:3 kVA
current capacity:50 / 60 Hz
weight of the machine ca.:1,0 t
dimensions of the machine ca.:3,0 x 1,6 x 2,5 m
Dielectric:
Jvcnpu
Work basin: 180 x 620 x 420 mm
Throughput: 75 l
Level min / max: 90/205 mm
Frontal pelvic opening: 650 mm
Container:
Dimensions: 530 x 975 x 750 mm
Throughput: 200 l more
|
|
1
table length 780 mm
table width 630 mm
ampere 50 A
0 1050 x 800 x 295 mm
workpiece weight 1500 kg
travel x / y 500 x 350 mm
travel -z axis 300 mm
wire dia. 0,05 - 0,25 mm
table speeds 1300 mm/min
voltage 400 V
total power requirement 15 kVA
weight of the machine ca. 3,0 t
dimensions of the machine ca. 1,80 x 2,80 x 2,10 m
coolant 1,40 x 2,20 x 1,30 m
Cg0sydzv
- serial-no.: 59020072 more
|
|
0
Travel axes: 400 x 300 x 255 mm [ X x Y x Z ]
max. workpiece size X: 730 mm
max. workpiece size Y: 630 mm
max. workpiece size Z: 250 mm
Fovrrpdd
max. workpiece weight: 500 kg
with AWF ( Automatic Wire Feeding )
U / V axis: 120 mm x 120 mm
submerged
taper cut max. +/- 30° with 80 mm more
|
|
15
Kaiserslautern, Germany
dealership location
6526 km
1996
ready for operation (used)
General Data
Measurements width 3300 mm
Measurements depth 3330 mm
Measurements height 2400 mm
Machine weight 3340 kg
Control Unit
Brand Charmilles
Main Drive
Wire diameter 0.1-0.3 mm
Movement
X-Axis Movement 450 mm
Y-Axis Movement 320 mm
Z-Axis Movement 162 mm
Workpiece
Workpiece X 1270 mm
Workpiece Y 800 mm
Workpiece Z 435 mm
Workpiece weight 800 kg
Table
Outer length 600 mm
Outer width 420 mm
Media
Main electronic connection 400 V
Additional Equipment
Auto Wire Feed
Dielectric Filtrati... more
|
|
6
Rolle, CH, Switzerland
dealership location
6572 km
2008
ready for operation (used)
MACHINE will be proposed cleaned and working.
Bedynaenlc more
|
|
3
Aachen, Germany
6358 km
2001
excellent (used)
INGERSOLLTypCenter 400Built2001Machine weight approx.4800 kgx-Weg400 mmy-Weg300 mmz-Weg300 mmWork piece weight500 kgControlMiltipulse 64Table width470 mmSpace requirement approx.2500x2200x2240Table length500 with accessories
Bfrmtfunkv more
|
|
1
CNC wire EDM (X: 450 mm)
SMA-REF-6511
Type: wire EDM machines
Manufacturer: Charmilles
Model: Robofil 400
Year: unknown
Control: Charmilles
Working range:
X: 450 mm
Y: 320 mm
Z: 175 mm
U: +/- 50 mm
V: +/- 50 mm
Workpiece dimensions: 800 x 560mm
Workpiece weight: max. 500 kg
Condition:
in use
ready for your test
lots of spares, chucks, coolant unit incl.
Bfoinblbcp
Location: Southern Germany
Availability: on demand
Terms of delivery:
ex works
free on truck
Terms of payment: 100% before disma... more
|
|
|
|
3
Schmalkalden, Germany
6640 km
1991
ready for operation (used)
Connection power 7.5 kW
Working area 450x350 mm
Nn2v7
max. current level 14
Cycles 0.1,2,3,4,5,6,7,8
3-axis X,Y,Z, no C-axis
Handwheel without axis selection buttons
no electrode changer more
|
|
2
Jelenia Góra, Poland
6957 km
2015
good (used)
Wire EDM machine FANUC ROBOCUT ALPHA C600IA 5 AWF produced in Japan in 2015.
The machine was used occasionally for 6 months in the tool for the production of prototypes.
Technical data :
- CNC control: Fanuc Series 31i-W MODEL B
- machine time worked: 1756 h
- power connection hours: 1922 h
- maximum dimensions of the workpiece: 1050 x 820 x 300 mm
- maximum work weight: 1000 kg
- X, Y axis travel: 400 x 600 mm
- Z axis travel: 310 mm
- travel of the U, V axis: +100 mm x + 100 mm
- wire diamet... more
|
|
11
Kaiserslautern, Germany
dealership location
6526 km
2017
ready for operation (used)
General Data
Measurements width 2020 mm
Measurements depth 2310 mm
Measurements height 1990 mm
Machine weight 2750 kg
Control Unit
Brand Sodick
Model LN2W
CNC language customizable Yes
Main Drive
Wire diameter 0.1-0.3 mm
Pt0rri
Movement
X-Axis Movement 400 mm
Y-Axis Movement 300 mm
Z-Axis Movement 220 mm
Workpiece
Workpiece weight 500 kg
Media
Main electronic connection 200 V
Power consumption 11 kVA
This Sodick VL 400Q Erosion Machine was made in 2017 in Japan. It has been working for on... more
|
|
6
Rolle, CH, Switzerland
dealership location
6572 km
1996
ready for operation (used)
Machine working. Geometry of the table checked.
Bfrttjiucf
Indicates 17'000 working hours (..Original?) more
|
|
8
Küssaberg, Germany
6648 km
1991
good (used)
This machine is in a well-kept and good used condition. We will separate from the plant by restructuring the company. The machine was shut down at the end of 2013 due to non-use. The operating hours worked until then were 35.307 hours (mainly single-shift operation). It has been cleaned and is ready for operation. Full operating instructions including maintenance manual are available (German) and can be viewed in advance. Complete machine specification:-Machine 200D hand control: RC123 generator... more
|
|
5
Söderköping, Sweden
6606 km
1985
reconditioned (used)
Charmilles
Knsd08hi
Model: Robofil 200
Year: 1985
Working tank size: 1050mm x 570mm more
|
|
5
Control CNC AGIEMATIC - CD
X travel 400 mm
Y travel 250 mm
Z travel 256 mm
Wire diameter 0,1 – 0,3 mm
U/V axes: ± 30 °
Max wpc size L = 860 mm, W = 580 mm, H = 250 mm,
Max wpc weight 400 kgs
Machine dimensions LxWxH = 1600 x 2000 x 2400 mm
Weight ca 3800 kgs
Damicxl more
|
|
7
Jelenia Góra, Poland
6957 km
2006
good (used)
The CNC Wire EDM machine JSEDM W-A430SA was built in 2006 by the Taiwanese company JSEDM. In 2006, the machine was bought for PLN 250,000.
Parameters of wire cutters:
- maximum dimension of the part (in draft or spray): 780x520x300 mm
Be78mrjto3
- maximum weight of the part (in draft or in a shower): 500 kg
- X and Y travels: 400x300 mm
- Z axis travel: 300 mm
- machine weight: approx. 2000 kg
- wire electrode diameter: 0.1 ~ 0.33 mm
- wire speed: 0 ~ 15 m / min
- max. wire reel weight: 6 kg
-... more
|
|
9
CNC wire EDM machine Fabr. MATRA-FANUC tape-cut model type where
Type # A04B-0224-B220 Masch.# 90855546 year 1989
Technical data:
Technical data:
Gr. Workpiece dimension 650 x 450 x 150 mm
Gr. Work-piece weight 300 kg
Table travel 500 x 320 mm
maximum table speed 360 mm / min.
Wire diameter of 0.05 - 0.25 mm
Wire tension 80-1000 g
Wire feed speed 0-5 m / min.
Cone angle of 5 degrees
controlled axes X, Y, U and V axes
at the same time controlled axes 4
smallest unit of input 0.001 mm
minimum inp... more
|
|
6
Rolle, CH, Switzerland
dealership location
6572 km
2001
ready for operation (used)
Machine working. Exchange due to new purchase. Dismounted and ready to be delivered.
X-Axis Travel (mm):
X-Axis Travel (mm):
X-Axis Travel (mm):
Worktank length:
Worktank width:
Worktank height:
Max. workpiece length:
Max. workpiece width:
Max. workpiece height:
Max. workpiece weight:
Taper angle/height:
Automatic Wire Feeding:
Length x width x height:
Weight (kg):
Worked power hours:
Berjuom0qy
The technical data and illustrations are not binding. They are not warranted chara... more
|
|
4
AXIS TRAVEL: X400 mm, Y300 mm, Z250 mm, U,V 100/100 mm
SUBMERGED
AWF (avto wire feeding)
LINEAR MOTORS
0tf8rmmd
cooling unit more
|
|
4
Control: Eagle PowerTec
Monitor: 17 inch color LCD
Nnbpp
Axes
X-axis travel inside the container mm: 420
Y-axis travel within the container mm: 300
Z-axis travel within the container mm: 400
Minimum distance electrode / work table without clamping system mm: 135
Maximum distance electrode / work table without clamping system mm: 535
C-axis
C axis smallest division degree: 0.001
C-axis speed rpm: 1-20
Load capacity with manual electrode change kg: 50
Carrying capacity with automatic electrode ... more
|
|
3
For sale is a Mitsubishi FX 20 K machine.
The Mascine can be visited under electricity.
Available from September 2019.
A short briefing or training in the handling of the machine
is possible.
Qt7w8r32 more
|
|
6
Built in 2003
Travel 500 x 350 x 300
Weight 1500 kg
Workpiece weight up to 1500 kg
Jvb3dm
Wire threading AT Advanced
64-bit CNC control
Standard Interfaces RS232C
3 1/2 Floppy Disk
10 kg wire station
Wire alignment block
Compressor cooling unit
Automatic fine hole search function
Wire chopper
Programming software Mitsubishi Master Prog.II more
|
|
6
Working range 450 x 650 x 300 mm
Table load 350 kg
Table travel 500 x 350 mm
Table speed 900 mm/min
Controlled axes X, Y, U, W
Beemkphpj7
Wire diameter range 0,05 - 0,33 mm
Wire feed 0 - 10 m/min
Taper cut +/-10 degree / 100 mm und +/-15 degree / 60 mm
Power required 11 kVA
Foot print LxW ca 2500 x 2500 mm
Weight ca 1500 kgs
The machine was little used. It works accurately (ca 0,01 mm).
No more in production but under power in our showroom. more
|
|
3
Freienried, Germany
6803 km
1990
excellent (used)
Funkenerosieve cutting system
Agie Agiecut 200D CNC
Control CNC AGIEMATIC - CD
X Path 400 mm
Y Path 250 mm
Z Path 256 mm
Drath diameter 0.1 - 0.3 mm
U/V Axles: x 30 °
Bdt8vx2pse
Max workpiece dimension L = 860 mm, W = 580 mm, H = 250 mm, Max workpiece weight 400 kg
Machine dimensions LxWxH = 1600 x 2000 x 2400 mm
Weight approx. 3800 kg
Built in 1990
Stextk
The plant originates from the experimental construction of a german car manufacturer and was very little in use. Very good conditi... more
|
|
3
Travel X-axis : 400 mm
Travel Y-axis : 600 mm
Travel Z-axis : 310 mm
Max. dimensions of workpiece : 1050 x 820 x 300 mm
Max. weight of workpiece : 1000 kg
Control system Fanuc : Fanuc 31i
The machine is in excellent condition, like new.
Contact me for price and more information.
Besupb3mmp more
|
|
6
Machine : Charmilles Robofil 300
Year of manufacture1994
Location Greece
Condition Very Good (8/10)
Origin Switzerland
Stock number 13110
Machine dimensions L x l x H 1800 x 1600 x 2230 mm
Machine weight (including CNC & tank) 2500 kg
Max. work piece weight 1000 kg
Max. work piece dimensions 850 x 500 x 400 mm
X Y -travel 400 x 250 mm
UV -travel 400 x 250 mm
Programmable Z travel 0 to 400 mm
Collision protection X Y Z U V
Taper angle +/- 30 degree
Table movement 0 to 900 mm/min
Programmable wi... more
|
|
7
Control CNC AGIEMATIC - CD
X travel 400 mm
Y travel 250 mm
Z travel 256 mm
Bdt8vx2pse
Wire diameter 0,1 – 0,3 mm
U/V axes: ± 30 °
Max wpc size L = 860 mm, W = 580 mm, H = 250 mm,
Max wpc weight 400 kgs
Machine dimensions LxWxH = 1600 x 2000 x 2400 mm
Weight ca 3800 kgs more
|
|
|
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Eroding machines
Dealer for Eroding machines
