Used Wire Winder for sale (3,234)

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Dcjdpfx Acsz Adnuopon

Condition: used, Year of construction: 2023, Overview This Robopac Genesis Futura HS pallet winder was built in 2023. It has under 500 operating hours - technically close to new. The rotating ring carries the pre-stretch carriage around the stationary pallet for high throughput without moving the load (see Capacity below). Delivered as a stand-alone unit with integrated roller conveyor, prepared for line integration over Ethernet TCP/IP. Technical data - Manufacturer: Robopac - Model: Genesis Futura HS - Year of manufacture: 2023 - Machine type: automatic rotating-ring stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: up to 92 pallets/h (13 wraps, H 1,000 mm), 77 pallets/h (17 wraps, H 1,600 mm), 70 pallets/h (19 wraps, H 2,000 mm) - Pallet size: 800 x 1,200 mm - Load height: 1,000 - 2,000 mm (incl. pallet) - Load weight: 100 - 1,200 kg - Conveyor height: approx. 550 mm; speed 15 m/min - Machine height: approx. 4,862 mm; hall height from 7,000 mm - Pre-stretch: SCV-B carriage, electronically adjustable 150 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. diameter 250 mm, core 76 mm, max. weight 20 kg - Control: Siemens SIMATIC S7-1200 PLC, Siemens TP700 7" colour touch panel - Wrapping programs: 15 (expandable to 64), 12 steps/recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry, oil-free - Documentation and HMI languages: German / English Equipment - High-speed rotating ring: power transfer to the pre-stretch carriage via sliding contacts, Wi-Fi commands - Integrated roller conveyor with pneumatic pallet lifting station (SMC PL-D) - Automatic film clamping, cutting and wide-band sealing unit - Fixed vertical hold-down (top press unit) stabilises the load during wrapping - Roping device gathers the film web from below - Photocell for automatic pallet-height reading, plus a pre-scan photocell with 3,800 mm reflector mast - Inverter-controlled IE3 motors, SEW geared, IP55, FESTO pneumatic components, SICK photocells - Siemens Scalance S615 VPN / firewall router and Scalance XB005 Ethernet switch, TCP/IP link to up-/downstream machines Dcedpfxezzz R Do Acpjn - Safety: Reer Safegate SMPO 1803 light curtain, fenced enclosure, dynamic fall protection on the ring - Operator panel separate from the main switch cabinet, plus remote control unit with emergency stop - R-Connect remote monitoring hardware: cloud portal for production data and teleservice - TPM package (centralised lubrication points, maintenance intervals on display), integrated HMI troubleshooting - Complete documentation on USB stick and in print: operating / maintenance manual, wiring / pneumatic diagrams, spare parts catalogue, layout Condition Used - almost as new, no visible production wear. Still installed and under power; inspection in operation on request. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: good (used), Zip Wire closed spiral in spools 3 pallets of spirals, 12 whole new spirals + 12 started. Dcodpfxjztn D Uo Acpjn In 3:1 and 2:1 spacing. Sold only in whole.

Condition: used, Year of construction: 2008, Overview This Haloila Octopus 1800 SFTS TWIN is an automatic rotary-ring stretch wrapper for palletised loads, built in 2008. It was built by Oy M. Haloila Ab and delivered under the ITW Mima Packaging Systems brand; the Octopus line is sold today under the Signode name. The machine is still installed, under power and running in production, and can be inspected in operation. The rotating ring carries the film carriages around the stationary pallet, so the load itself is never turned. In the TWIN configuration two film carriages run on the ring, which is what carries the output: up to 100 pallets per hour with standard overlap and 21 wraps. Euro pallets and half pallets are processed. A top sheet unit is installed, functional and in daily use. The machine has no automatic reel change (RCS). Technical data - Manufacturer: Haloila - Model: Octopus 1800 SFTS TWIN - Year of manufacture: 2008 - Machine type: automatic rotary-ring pallet stretch wrapper (pallet winder) Dcsdpfx Acjz D Aw Uspjn - Operating hours: 50,408 h - Output: up to 100 pallets/h at standard overlap and 21 wraps - Pallet formats: Euro pallets and half pallets - Configuration: TWIN, two film carriages on the rotating ring - Automatic reel change (RCS): no - Top sheet unit: yes, functional and in use - Control: Siemens SIMATIC S7-300 PLC - Operator panel: Siemens SIMATIC touch panel - Communication: SIMATIC NET / PROFIBUS - Drives: Emerson / Control Techniques frequency inverters (Commander SK, Unidrive M300) - Power supply: 3 x 400 V - Max. current: 20 A - Connected load: 5.0 kW - Machine weight: approx. 2,650 kg - CE mark on the machine plate Equipment - Rotating ring with two film carriages (TWIN), film clamping and cutting on the ring - Top sheet unit for covering the pallet load before wrapping - Siemens SIMATIC S7-300 control with touch panel operation in a separate switch cabinet - Emerson / Control Techniques inverter drives - Pallet conveyors below the winder, included in the sale - Operating manual, wiring diagrams and further technical documentation Condition Used and fully functional. The machine is in production at the time of listing and has 50,408 operating hours. Maintenance was carried out regularly by the machine manufacturer. Sold without warranty. Availability From 16 October 2026. Location: Germany.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, TEUREMA EHS-110 WIRE DRAWING LINE Year of manufacture: 1999 Maximum speed: 10 m/s Total installed power: 230 kW TEUREMA EHS-110 wire drawing line with robust construction, equipped with a Tecno Impianti drawing bench and prepared for industrial use. The machine has undergone a complete electrical modernization, including a new main electrical panel, Siemens S7-1500 PLC, Siemens 1200 HMI screen, 100% new wiring, and new push-button stations, which significantly improves the reliability, maintenance, and operability of the unit. LINE COMPOSITION Coil stands - 2 tilting winders - Maximum capacity per winder: 3,000 kg Vertical winding tower - 6-meter tower Dcodszycakjpfx Acpjn - Lifting and lowering carriage with a hoist Mechanical decaling unit Soaping unit - Motor: 1.5 kW - Speed: 1,500 rpm TECNO IMPIANTI DRAWING BENCH - Number of steps: 2 - Two-ring coil: - 1st ring: Ø 610 mm - 2nd ring: Ø 760 mm - 3-speed gearbox: - 3.90 m/s - 7.20 m/s - 10.00 m/s - Power: 160 kW - Frequency: 50 Hz Horizontal coiler - Horizontal drive - Maximum coil capacity: 3,000 kg - 2-speed gearbox: - 7.3 m/s - 10.0 m/s - Maximum coil diameter: Ø 1,200 mm - Core diameter: Ø 600 mm - Usable width: 900 mm - Power: 45 kW TECHNICAL DATA - Inlet diameter: 5.5 to 14 mm - Outlet diameter: 4 to 12 mm - Number of blocks: 1 vertical - Maximum line speed: 10 m/s - 2 CL30 A 33 Eurolls cassettes - Rollers: Ø 150 x Ø 90 x 15/20 mm - Total machine power: 230 kW - Frequency: 50/60 Hz ELECTRICAL AND AUTOMATION UPGRADE - Completely new main electrical panel - Siemens S7-1500 PLC - Siemens HMI 1200 screen - 100% new wiring - New push-button stations - New programming AVAILABLE SERVICES Possibility of supply with: - installation - assembly - commissioning - technical assistance - adaptation according to customer needs

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1320, For sale: SODICK CNC wire-cut EDM machine - Model: AQ325L LN 1W - Year: 2002 - Serial No.: 1320 The machine has been regularly maintained by BTS COMPANY d.o.o. and CELADA d.o.o. It was used for machining workpieces weighing up to 5 kg and for various toolmaking applications. Thanks to its precision, it operates with the accuracy of a measuring machine. Djdpfxjz Iywaj Acpecn It is connected to the power supply and ready for operation.

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair Dcjdpfxezgu Igj Acpjn documentation and software machine powered up for inspection

Year of construction: 2019, operating hours: 3,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: RM2019003, Rolling mill for flattening wire. Manufacturer: Nantong Geron Intelligent Equipment R&D Co., Ltd. Brand: GEHI Model: GZYH19004 Rolling Mill Year of manufacture: 08/2019 Serial number: RM2019003 TECHNICAL SPECIFICATIONS Supply voltage: 380 V Frequency: 50 Hz Dcodjz Infropfx Acpjn Installed power: 200 kW Working speed: 0 – 150 m/min Feed material (wire): Ø ≤ 13 mm Machine dimensions: 18,000 × 3,000 × 2,000 mm Approximate weight: 10,000 kg DESCRIPTION GEHI GZYH19004 industrial rolling mill, designed for processing wire and round materials with a diameter of up to 13 mm. High-capacity industrial machine, equipped with an installed power of 200 kW and a working speed of up to 150 m/min, suitable for industrial applications and high-volume production lines. Heavy-duty construction, with a total length of approximately 18 meters, designed for continuous industrial operation and high-speed processing. MAIN DATA Model: GZYH19004 Year: 2019 Power: 200 kW Speed: up to 150 m/min Material diameter: up to Ø13 mm Weight: approx. 10 tons Dimensions: 18 × 3 × 2 m

Condition: used, Year of construction: 1988, functionality: fully functional, workpiece weight (max.): 350 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 270 mm, wire diameter (max.): 0.3 mm, table width: 450 mm, overall weight: 2,300 kg, table length: 600 mm, table height: 300 mm, empty load weight: 2,300 kg, Two machines for the price of one. One machine is fully operational and in good condition for its age, equipped with a collecting system (sliding slats), and the other can be made operational again with minimal effort, but the new owner can also use it for spare parts (all electrical boards are intact; the pump system and wiring system require repair). The Matra Fanuc Tape Cut W2 is a classic and extremely reliable CNC wire EDM machine manufactured in 1988. This machine combines the cutting-edge technology of the Japanese Fanuc control system with the precision engineering of the German Matra machine tool manufacturer. Dsdezcww Rspfx Acpjcn The machines can also be purchased separately upon request. Machine requiring repair: €1500; Operational machine: €4500.

Condition: excellent (used), Year of construction: 2011, operating hours: 6,800 h, functionality: fully functional, machine/vehicle number: 0339, travel distance X-axis: 400 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 250 mm, total height: 2,220 mm, total length: 2,395 mm, total width: 2,240 mm, wire diameter (max.): 0.3 mm, type of input current: three-phase, table width: 636 mm, overall weight: 3,950 kg, table length: 473 mm, table height: 995 mm, empty load weight: 3,950 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 38 A, Equipment: cooling unit, documentation/manual, Good morning, For sale is a Sodick AG400L LN2W wire EDM machine. The machine is in perfect working order and was used for our own tooling production. It has been maintained in excellent condition and, despite its age, has only 6,800 operating hours. Dcedpozzwrkefx Acpen

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1154, total height: 2,040 mm, total length: 2,200 mm, total width: 1,770 mm, type of input current: three-phase, table width: 400 mm, overall weight: 3,100 kg, table length: 600 mm, table height: 220 mm, empty load weight: 2,800 kg, table load: 450 kg, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, The Sodick AQ325L wire EDM machine was manufactured in 2002 by the Japanese company Sodic Co., Ltd. This is a precision CNC machine designed for cutting various shapes in conductive materials using the EDM (Wire Cut) method. This model combines a compact design with high machining accuracy, making it ideal for both single and serial production, especially for manufacturing parts with complex geometries. The machine offers a working area capable of machining parts with dimensions up to 350 × 250 × 220 mm and a weight of up to 450 kg. The stable construction and precise axis guidance ensure high repeatability and cutting accuracy, even with demanding materials and complex contours. Additional U and V axes allow for tapered cuts up to 20°, which significantly expands the technological capabilities of the machine. The Sodick AQ325L EDM machine operates with wire diameters ranging from 0.15 to 0.30 mm, offering adjustable wire tension over a wide range and a high wire feed rate, resulting in efficient and stable machining. The immersion system enables operation in a dielectric fluid, increasing the surface quality and dimensional accuracy of the machined parts. The Sodic AQ 325 L wire EDM machine is equipped with an efficient dielectric system with a capacity of 530 liters, featuring a filtration system based on replaceable paper filters and a deionizer, which guarantees the maintenance of appropriate operating parameters and a long service life for the components. The ergonomic table height and well-thought-out design facilitate operation and the preparation of parts for machining. Thanks to its robust construction, high weight, and proven technology from the manufacturer Sodick, the AQ325L model is a reliable solution for tool shops, production facilities, and companies involved in precision metalworking. Specifications of the Sodic AQ 325L Wire EDM Machine - Table travel (X / Y axis): 350 × 250 mm - Z-axis travel: 220 mm - Auxiliary table travel (U / V axis): 80 × 80 mm - Working table size: 600 × 400 mm - Working tank dimensions: 895 × 650 mm Dodpfx Acoz Az Uvopecn - Maximum workpiece height: 220 mm - Maximum workpiece height during immersion machining: 200 mm - Maximum workpiece weight: 450 kg - Maximum workpiece weight during immersion machining: 300 kg - Distance from the floor to the top surface of the table: 965 mm - Taper / cutting angle: 20° / 80 mm - Wire tension: 300–2300 g - Max. wire feed rate: 250 mm/s - Wire diameter: 0.15–0.30 mm - Max. wire spool weight: 6 kg - Machine dimensions (W × D × H): 1650 × 1900 × 2040 mm - Overall machine dimensions: 2250 × 2200 mm - Machine weight: 2800 kg Dielectric tank - External dimensions (W × D × H): 550 × 2200 × 1770 mm - Weight of empty tank: 230 kg - Capacity: 530 l - Deionizer: 10 l Filtration system: 2 replaceable paper filters - Layout / arrangement as shown in the drawing - Total length of the system: 3000 mm - Total width of the system: 3500 mm - Power supply: 3-phase AC 220V (50/60Hz)

Condition: used, Year of construction: 2014, operating hours: 21,476 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 510 mm, feed length X-axis: 750 mm, feed length Y-axis: 500 mm, feed length Z-axis: 510 mm, We offer this used AGIE Charmilles CUT 400 SP wire erosion machine, manufactured in 2014. Type: CUT 400 SP Serial number: 001.018 Year of manufacture: 2014 Technical data: Travel ranges (X/Y/Z): 750 x 500 x 510 mm High-precision machining with excellent surface quality Automatic wire threading system (AWT) Modern CNC control with intuitive operation Dsdpfxoz A R H Uo Acpecn Stable machine construction for maximum accuracy Year of manufacture: 2014 Condition & Equipment: Regularly maintained Fully functional and ready for use Inspection and test run possible upon agreement Special features: Due to the large travel ranges, the machine is particularly suitable for larger workpieces and versatile applications in single-piece and series production. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2021, FANUC ROBOCUT C400iC wire EDM machine + FANUC CRX-10iA robot, manufactured in 2021. FANUC 31i-WB CNC control. X, Y, Z LINEAR SCALES. AUTOMATIC DOOR. FANUC ROTARY TABLE. CHILLER UNIT. Travel: X 400, Y 300, Z 255, U +60, V +60 mm. Maximum taper 30°/80 mm. Maximum dimensions of the part to be machined: 730 x 585 x 250 mm. Maximum weight of the part to be machined: 500 kg. Wire spools up to 16 kg. Wire diameters: 0.10-0.30 mm. FANUC CRX-10iA ROBOT. Dcjdoz Hw Hcepfx Acpon VISION SYSTEM. 6 controlled axes. R-30iB Plus controller. Maximum load: 10 kg. Maximum arm length: 1,249 mm.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,325 mm, total length: 3,100 mm, total width: 2,800 mm, overall weight: 5,000 kg, Equipment: cooling unit, GF AgieCharmilles CUT 30P – Wire EDM machine, manufactured in 2011 Wire EDM machine for tool and die making Technical data & features: - Travel ranges X/Y/Z: 600 × 400 × 350 mm - U/V axes: ± 50 mm - Max. workpiece size: 1,050 × 800 × 350 mm - Max. workpiece weight: 1,000 kg - Tapered machining: up to ± 25° at 80 mm height - Wire diameter: 0.15–0.30 mm, wire spool: 25 kg - Automatic wire feeding and re-threading Djdpfxsz I Rits Acpocn - Glass scales, automatic wire tensioning and collision protection - Surface quality: up to Ra < 0.25 µm - Windows-based control system with 15″ LCD, DXF import and 3D graphics check - Connection power: 9 kVA The machine has already been cleaned, overhauled and tested. You are welcome to inspect the machine on site and test it under power. We can also offer transport, commissioning and training as additional services. Contact us for a customized offer.

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 808, The machine is designed for straightening and cutting wire with a diameter of 4-10 mm and a tensile strength of 400-700 N/mm2, using appropriate straightening and cutting tools. The maximum length of the cut wire is 3000 mm. Wire coil: maximum coil weight 1500 kg, maximum coil height 1000 mm, internal coil diameter 450 mm. The total length of the machine, including the wire unwinder, is approximately 10 m. Machine weight: 8 tons. Location: In our workshop. Djdpfx Acozy Et Tepjcn

Condition: ready for operation (used), Year of construction: 2021, overall weight: 217 kg, load capacity: 6 kg, arm reach: 2,011 mm, number of axes: 6, This 6-axis PANASONIC TAWERS TM-2000WG3 Super Active Wire was manufactured in 2021. It features a maximum reach of 2,011 mm and a payload capacity of 6 kg. The system includes a 350 A welding power source and is equipped with advanced welding processes such as SP-MAG and Pulse MAG. If you are looking to get high-quality welding capabilities, consider the PANASONIC TAWERS TM-2000WG3 Super Active Wire robot arm we have for sale. Contact us for further details. • Welding power source: 350 A • Welding processes: SP-MAG / Pulse MAG (MIG optional; TIG DC optional) • Repeatability: ±0.10 mm or better • Maximum robot rapid movement: up to 180 m/min • Motion ranges: base ±170°; upper arm -90° to +165°; forearm -80° to +210°; wrist rotation ±270° • Maximum axis speeds: base 195°/s; upper arm 197°/s; forearm 205°/s; wrist up to 629°/s • Wire feeding capability: Super Active Wire • Safety system: CE compliant Additional equipment • Güdel TMF-1 linear track (2,000 mm travel; repeatability ±0.02 mm) with drive, servo control and track structure • 2 × Panasonic servo-controlled rotary positioners + positioner servo control system • 2 × workpiece frames (approx. 3,500 × 1,500 mm) providing 2 welding/loading stations • Super Active Wire welding torch • Wire Booster system • Wire spool stand / wire cassette • Torch cooling unit • Torch cleaning station • Touch Sensor • Arc Sensor • Power transformer • Robot cable package • Robot/positioner support structures • 2 × safety light curtains and complete cell guarding • Control and integration system • Robot controller / control cabinet Main Components Included • Panasonic TM-2000WG3 welding robot • Panasonic 350 A welding power source • Robot controller / control cabinet • Super Active Wire welding torch • Wire Booster system Dsdpfoz Dtn Djx Acpscn • Wire spool stand / wire cassette • Torch cooling unit • Torch cleaning station • Touch Sensor • Arc Sensor • Power transformer • Robot cable package • 2 × Panasonic rotary positioners • Positioner servo control system • 2 × workpiece frames • Güdel TMF-1 linear track, 2 m • Linear track drive • Linear track servo control • Güdel track structure • 2 × safety light curtains • Robot / positioner support structures • Complete cell guarding • CE safety system • Control and integration system

Year of construction: 2012, condition: used, X: 550 mm, Y: 350 mm, Z: 400 mm, Ra ≈ 0,07 μm Tel Erezyon Makinesi (Wire Dedjzxrh Ujpfx Acpecn EDM)

Condition: excellent (used), Year of construction: 2011, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 304, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, total height: 2,550 mm, total length: 1,900 mm, total width: 1,690 mm, workpiece height (max.): 550 mm, workpiece width (max.): 800 mm, workpiece length (max.): 370 mm, type of input current: three-phase, table width: 400 mm, overall weight: 2,350 kg, table length: 500 mm, empty load weight: 2,350 kg, table load: 500 kg, input voltage: 400 V, tank capacity: 410 l, input frequency: 50 Hz, input current: 10 A, Equipment: compressor, cooling unit, documentation/manual, Very good condition used machine with only 12000 hours working time. Located in Rajkot, Gujarat, India Dcsdpfx Acsz Dpapepjn

Condition: excellent (used), Year of construction: 2011, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 304, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, total height: 2,550 mm, total length: 1,900 mm, total width: 1,690 mm, workpiece height (max.): 550 mm, workpiece width (max.): 800 mm, workpiece length (max.): 370 mm, type of input current: three-phase, table width: 400 mm, overall weight: 2,350 kg, table length: 500 mm, empty load weight: 2,350 kg, table load: 500 kg, input voltage: 400 V, tank capacity: 410 l, input frequency: 50 Hz, input current: 10 A, Equipment: compressor, cooling unit, documentation/manual, Very good condition used machine with only 12000 hours working time. Located in Rajkot, Gujarat, India Dcodpfoz Dpacex Acpen

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, GF AgieCharmilles CUT 2000X Year of manufacture: 2018 Travel ranges: X = 350 mm, Y = 250 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.30 mm, including option KIT 50 Includes automatic wire changer AWC Wire EDM machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes glass scales for X and Y axes VISION 5 control 15" LCD color screen, jog shuttle and mouse Includes Conic-Plus option for improved taper Includes Threading Expert Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. We would be happy to perform an individual test cut. Dcedsz I Nbbopfx Acpon We also offer on-site commissioning and training for this machine.

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,050 mm, total length: 2,800 mm, total width: 2,200 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 560 mm, workpiece length (max.): 800 mm, type of input current: AC, overall weight: 2,500 kg, input voltage: 400 V, positioning accuracy: 0.001 mm, Equipment: cooling unit, documentation/manual, CHMER A422S Wire EDM Machine Year of manufacture: 2008, used Dodpfx Ajzhvhdecpecn Travel in X: 400 mm Travel in Y: 250 mm Travel in Z: 220 mm Maximum workpiece size: 800 x 560 x 215 mm Maximum workpiece weight: 250 kg Travel in U x V: +/- 30 mm Maximum taper angle: +/- 14.5° / 80 mm Wire diameter: 0.15 to 0.3 mm Axis drive system: AC servomotors Glass scales in X and Y axis Achievable surface accuracy: RA 1.6 µm Anti-electrolysis generator CNC control: FANUC compatible 15” TFT monitor Handheld remote control Automatic wire threading with thermal wire cutting Threading without water jet in 6 seconds Dielectric cooler Block for automatic vertical and conical wire alignment Documentation in English A horizontal rotary axis (6th axis) is included. This was dismantled due to lack of need and was not in operation. Connection: 400 V, 3-phase, 13 kVA Dimensions (L x W x H): 220 x 280 x 205 cm Machine weight: 2,500 kg Optional Hirschmann clamping frame: €2,000.00 Commissioning, price based on effort Basic training, price based on effort

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm Maximum workpiece weight: 4,000 kg X and Y axis travels: 1,200 x 800 mm U and V axis travels: 260 x 260 mm Z axis travel: 600 mm Permissible wire diameter: 0.2 – 0.30 mm Simultaneously controlled axes: 4 (X, Y, U, V) Motors: AC on all 5 axes Maximum taper: 30° over 100 mm Machine weight: 9,600 kg FILTRATION UNIT Tank capacity: 3,000 liters Conductivity control system: Automatic Resin capacity: 14 liters Temperature control: Automatic Dielectric cooling system: Chiller GENERATOR Power circuits: AC MOSFET Minimum surface roughness: Ra 0.35 µm Cutting speed: 360 mm²/min (brass wire Ø 0.30 mm) Automatic wire threading: Standard Power supply: 400V, three-phase CNC CONTROL Hardware: 64-bit industrial PC Memory: 1 GB Screen: 15” TFT touchscreen Data input: Keyboard, RS232, floppy disk, LAN, USB Positioning system: Closed-loop servo-controlled Number of controlled axes: 5 (X, Y, U, V, Z) Minimum programmable increment: 0.0001 mm MACHINE EQUIPPED WITH: Optical scales on X and Y axes 600 mm Z axis Wire spool holder for coils up to 50 kg No. 1 set of 0.25 mm guides No. 1 set of 0.30 mm guides Djdpfx Aexwmacscpocn Taper cutting system Automatic wire threading and re-threading after breakage Clamping system: frame with universal drilling pattern 64-bit CNC control with 16 GB memory AC power generator with anti-electrolysis device Automatic technology generation Serial interface, floppy drive, LAN, USB Dielectric unit with automatic demineralization system Chiller Year of manufacture: 2018

Condition: good (used), Year of construction: 2009, operating hours: 1,850 h, functionality: fully functional, overall weight: 4,000 kg, Equipment: documentation/manual, The machine was put into operation in Switzerland in 2010 and operated flawlessly until its last day. The machine comes from a prototype development department, which explains the low number of operating hours. Dcjdpfjz Hzz Djx Acpjn

Condition: used, Year of construction: 1997, functionality: not functional, type of input current: three-phase, overall weight: 422 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 14 A, Equipment: cooling unit, documentation/manual, We offer this used AGIE AGIECUT 125 wire EDM machine, manufactured in 1997. Type: AGIEPULS MMD Serial number: 491.010 Electrical diagram: 624262.2 Weight: 422 kg Voltage: 3 x 400 V Frequency: 50 / 60 Hz Rated current: 14.75 A The machine is currently disconnected. All electronic components, circuit boards, and the numerical control unit are intact. We suggest using it for spare parts recovery. Dcedpfxoz Affno Acpjn If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Wire diameter range: 2,0 - 6,0 mm Wire feeding length: unlimited Bend-back clearance: max. 1.000 mm Dodpfx Aoz Imcvocpecn Weight: 4.000 Kg. complete with an motorized wire decoiler WAFIOS AHL 41