Used Wire Coiling Machine for sale (65,389)

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius Ksdpfx Abswhf Hfj Tewu 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Ksdpsif Sg Sjfx Ab Tewu Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg Kodjin Rn Aspfx Ab Tewu

Condition: good (used), Year of construction: 2018, 1 used CNC wire EDM machine Make: Sodick Kwsdpfx Abeyknpge Teu Model: AQ 750 L, year 2002, overhauled by Sodick in 2018 4000 operating hours since overhaul Control: MARK 30 LN 1 W Wire threading: 97 Pipe AWT

Condition: used, Travel: 260x160x180mm Work-place: 600x900mm Complete with belongings - Documentation available: Yes - CE certificate present: No - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Kodpfxsx Igc Us Ab Towu Lukas van Rossum

Condition: excellent (used), FOR SALE Mitsubishi EA12VM ADVANCE Die-Sinking EDM: General Information Kwedoyhgc Hepfx Ab Tou - Manufacturer: Mitsubishi Electric - Model: EA12VM ADVANCE - Type: Die-Sinking EDM - Year: approx. 2013 - Control: Mitsubishi M700 Series CNC with touchscreen interface Machining Capacities - Axis travels: X: ~400 mm / Y: ~300 mm / Z: ~300 mm - Table dimensions: ~700 × 500 mm - Max. workpiece dimensions: approx. 800 × 550 × 250 mm - Max. workpiece weight: ~700 kg - Max. electrode weight: ~50 kg - C-Axis: Equipped with 3R/MACRO chuck for rotation and indexing Generator and Features - Power supply: FP80V (80 A) – FP120V (120 A) option available - Technologies: GM2/SC/PS circuits for optimized speed and surface finish, Fuzzy Pro system - Connectivity: USB and Ethernet - Filtration: Dual-stage system with integrated chiller for dielectric thermal management Dimensions and Weight - Footprint: approx. 1750 × 2050 × 2335 mm - Total weight: approx. 3700 – 3800 kg

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 525 mm, GF AgieCharmilles Progress VP4 Year of manufacture: 2012 Travel paths: X = 800 mm, Y = 550 mm, Z = 525 mm Travel paths: U = 800 mm, V = 550 mm Maximum taper: 30° at 500 mm height Maximum workpiece dimensions: 1300 x 1000 x 510 mm Maximum workpiece weight: 3000 kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged-type wire EDM machine with automatic wire threading and re-threading after wire breakage Including automatic front door Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 2900 x 3050 x 2850 mm Net weight: 6000 kg Ksdjyir N Uspfx Ab Tewu The machine will be cleaned and fully overhauled after order confirmation. A 6-month warranty on all machine parts is included. Commissioning and training can also be offered on request.

Condition: good (used), Year of construction: 2021, Wire EDM machine MITSUBISHI MV2400S II, no. 51DC2501, year of manufacture 2021, weight 3,500 kg, with various auxiliary units, work area 600 x 400 x 310 mm Kodpfx Aeyl Uu Eeb Tjwu

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, Mitsubishi wire-cut EDM machine FA20-S advance, year 2011, fully functional. Can be inspected under power. Kjdeylyhkepfx Ab Towu

Condition: used, machine/vehicle number: 6099, Coil winding machine HDR type 20.1/89 Winding diameter: 200 mm, laying width: 350 mm Max. wire diameter: 2.5 mm Kodpfxjyl Ntie Ab Tewu

Condition: used, machine/vehicle number: Nr. 84064. Nr. 86016 Nr. 82013, 3 winding machines, 4-fold flyer Winding diameter: 40 mm, laying width: 150 mm Max. wire diameter: 1.0 mm Kjdpfeylzurjx Ab Tjwu HKW 2/7 no. 82013, 4-fold reversing bar Tool EI 84/20/5

Condition: used, machine/vehicle number: 85252. und 85122, Coil winding machine Aumann WG 85253 Winding diameter 160 mm, laying width 550 mm Wire guide DF 50 No. 85099 defective Coil winding machine Aumann PW 85122 Winding diameter 100 mm, laying width 200 mm Wire guide DF 70 No. 85115 Kodpfsylztujx Ab Tjwu

Condition: used, machine/vehicle number: 8528, Coil winding machine Blume und Redecker AM 2100 Winding diameter: 330 mm, laying width: 700 mm Maximum wire thickness: 2 mm Kwodsylzr Repfx Ab Tju

Condition: used, machine/vehicle number: 10458, Coil winding machine Meteor M 10 Kwjdpfxsylzqte Ab Tsu Winding diameter: 80 mm, winding width: 60 mm Max. wire thickness: 0.3 mm

Condition: used, machine/vehicle number: FN 100, Coil winding machine Winding diameter: 120 mm x 200 mm Maximum wire thickness: 0.3 mm Kwedpoylzn Sjfx Ab Teu

Condition: used, Micafil winding machine Kwsdpfoylzmuex Ab Tou Winding diameter 160 mm, laying width 400 mm Wire diameter 0.06 - 1.5 mm

Condition: used, machine/vehicle number: 8544, Coil winding machine Blume und Redecker AM 100 Kwodpsylzghsfx Ab Tsu Winding diameter: 200 mm, laying width: 600 mm Maximum wire diameter: 2 mm

Condition: used, functionality: fully functional, Coil winding machine Froitzheim und Rudert Kwsdpfxsylydlj Ab Tju Winding diameter 250 mm, winding width 500 mm Pneumatic tailstock

Condition: used, machine/vehicle number: 65334, Round wrapping machine, winder Blume and Redecker VA65E Kwedpfxeylybkj Ab Tsu

Condition: used, Bobifil winding machine, 1 flyer, 4-position rotary table Winding diameter: 250 mm x 70 mm Kedpfjylwmdox Ab Tewu Wire: 0.1 - 1.75 mm ø 5 units K available

Condition: ready for operation (used), machine/vehicle number: 90002, Kandula coil winding machine FDW 500/2 Max. spool: 200 x 300 mm Max. wire: 1.5 mm Kedpfoyll Agjx Ab Tjwu

Condition: reconditioned (used), Year of construction: 2006, operating hours: 19,500 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, overall weight: 2,450 kg, Charmilles FI240SL, year 2006. The machine can be inspected at our premises in Semsales during April. The machine will be fully cleaned and serviced. Viewing available on request. Kwedpfx Aboylkr Ts Tsu

Condition: used, Year of construction: 2014, operating hours: 45,000 h, Travel: X 600 / Y 400 / Z 310; Water bath machine; Automatic wire threading; Chiller. Kwsdpfeyftr Aox Ab Tou

Condition: used, machine/vehicle number: 19142, Wire Stiching Machine Polygraph 703 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Kwedpfx Ash Axw Tsb Tou

Condition: used, Drahtheftmaschine - Wire Stitching Machine Polygraph 103Serial-No. 6875 Manuals Included Online-Video-Inspection by Skype-Video Kwjdjh Ax Ufepfx Ab Tsu We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test