Used Hydraulic Shear for sale (17,470)

Condition: used, LVD MVS 5050 × 6 – Technical Specifications: * Maximum sheet thickness: 6.35 mm Gedpszmam Iefx An Ejui * Maximum cutting length: 5,050 mm * Back gauge range: 750 mm * Adjustable cutting angle: 0.5° – 2.5° * Adjustable blade clearance: 0.05 – 0.7 mm * Strokes per minute: 12 – 45 * Main motor: 15 HP (approximately 11 kW) * Machine weight: 12,000 kg * Power supply: 230 V

Condition: new, functionality: fully functional, Year of construction: 2024, MOSER Hydraulic Guillotine Shear Godpoxgtq Tofx An Esui Model: HGL 3106 Stock machine Serial No.: 30603 Year of manufacture: 10/2024 Specifications: - Swing beam design - Upper blade: Two cutting edges - Lower blade: Four cutting edges - Suitable for single and continuous stroke operation - Motorized blade gap adjustment - Motorized backgauge, 750 mm with ball screw spindles, foldable, positionable via NC controller, CYBELEC, model: CybTouch 8 W - Fixed angle stop with scale and foldable stop cam - Worktable with support plates and support balls integrated into the table - Two front support arms - Finger guard with light barrier - Side and rear safety covers - Cutting line illumination - Technical documentation - CE compliant - Colors: * RAL 7015 – Slate grey * RAL 7035 – Light grey * RAL 3003 – Ruby red Technical Data: Sheet thickness ≤ 450 N/mm²: 6 mm Sheet thickness ≤ 700 N/mm²: 4 mm Cutting length: 3,060 mm Cutting angle: 1.6° Main motor: 11 kW Number of hold-downs: 17 pcs Strokes per minute: 20 pcs Oil tank: 160 liters Usable backgauge measuring range: 750 mm Backgauge positioning motor: 0.37 kW Dimensions (L x W x H): 4,000 x 2,200 x 1,700 mm Weight: 5,500 kg

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: Gedpfx Aouagxpon Eoui - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: good (used), functionality: fully functional, Year of construction: 2010, Hydraulic sheet metal shear Manufacturer: ATLANTIC, Type: ATS 2012 Year of manufacture: 2010 Technical data Manufacturer: ATLANTIC Type: ATS 2012 Year of manufacture: 2010 Sheet metal size: 2000 x 12 mm Shear angle adjustment: 0.5 – 3 degrees Working height: 900 mm Motor power: 22.5 kW Dimensions: approx. L 3.20 x W 1.50 x H 2.30 m Weight: approx. 8 t Equipment Gjdoz Ny Ntepfx An Eeui • Angle stop • Support arms • Manual shear gap adjustment • Automatic shear angle adjustment • Motorized backstop All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: excellent (used), functionality: fully functional, Year of construction: 1972, HELMUT LOTZE Guedpfx Asyllrhjn Eji TYPE: KSHY30 Year of manufacture: 1972 Max. power: 5

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used 4-meter Safan guillotine shear Type: VS 430 3 Capacity: 4300 x 3 mm Gujdjyu Ig Hopfx An Eji Electric back gauge Output stacking system with stacker and high support table Year of manufacture: 1990

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 13.0 mm Guodpfxox Ni D Ro An Esi thickness at "Niro-steel" 8.0 mm down holder 14 Stück no. of strokes max. 11 Hub/min cutting angle 1°15 work height max. 770 mm column arm ? mm oil volume 300 ltr. control konv. total power requirement 15.0 kW weight 11800 kg range L-W-H 4255 x 2250 x 2400 mm Features: - Robust electro-hydraulic swing pruning shears - Operation, swivels to the front left - Electro-motorized backgauge * on recirculating ball screws * Movement by push-button (forwards backwards) * including ELGO digital position indicator - Manual quick cutting gap adjustment * by eccentric (right side stand) - Machine stand with overhang - 1x long side stop, with mm scale - 2x front support arms, with mm scale - Ball rollers in the front support table - Hinged front finger guard - 1x free-moving foot switch - Rear safety device (protective grille) - 2x front emergency stop button - Operating instructions (PDF)

Condition: used, Year of construction: 1995, sheet width 6000 mm plate thickness 6 mm distance between columns 610 mm Control Elgo 87 P2 total power requirement 15 kW weight of the machine ca. 22 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Gjdjyutt Eopfx An Esui If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2015, 2015 | Arden AS-042 | Used Hydraulic Shear 📍Location: France Gedpfey Dg Atsx An Eoui 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 46400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Could not perform operational test but the seller insures it is in very good condition and works well. It’s Arden AS-042R60 HD290-9 SN:151811Y4 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40673 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 607697782, Offer 23220 Technical Data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle, hydraulically adjustable 0.3 - 3° - Manual adjustment of the cutting gap - Number of hydraulic clamping cylinders 17 pcs - Motor-controlled rear stop 20 - 700 mm - Front angle stop + support arms - Stroke rate depending on the cutting angle and cutting length 7 - 17 strokes/min - Hydraulic drive 400 V / 15 kW - Table height approx. 900 mm - Space requirement including rear stop, without front support arms Gusdpfezqdcbex An Esi - approx. W 3700 x H 1850 x D 2250 mm - Weight approx. 5800 kg - Including: - E-foot switch - Cutting line illumination - Cutting length preselection via potentiometer - Machine rear with light curtain safety

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: Guedpfx Anjxab Tvs Eji - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: used, Year of construction: 2006, sheet thickness (max.): 6 mm, Brand: DURMA Type: VS 3006 Year of manufacture: 2006 Maximum sheet width: 3080 mm Maximum sheet thickness: 6 mm Gusdpfjwrx Tasx An Eoi

Condition: good (used), Year of construction: 2002, machine/vehicle number: 69584, Offer 26220 Technical Data: - Cutting length 3050 mm - Cutting thickness at 400 N/mm² tensile strength 16 mm - Cutting thickness at 400 N/mm² tensile strength up to 1000 mm length 18 mm - Cutting angle 0.5 - 3 ° - Number of sheet metal clamps 18 pcs Gjdpfxjzuzrbo An Eoui - Stroke rate 10 - 23 min - Motorized back gauge up to 1000 mm - Rear guard with light curtain - Front angle stop 1000 mm - HSLX version: - CNC control HACO SC 5 controller when entering the sheet metal thickness in mm - Automatic cutting angle adjustment based on sheet metal thickness - Cutting length limitation - Automatic positioning of the back gauge (8 programs – 80 steps) with - Digital display and automatic retraction of the back gauge - Drive 400 V / 22 kW - E - Foot pedal - Space requirement without support arms approx. W 4500 x H 2250 x D 2200 mm - Weight approx. 14500 kg

Condition: used, Hydraulic guillotine shears SAGITA - MANURHIN - License BEYELER Type 2550 x 6 Machine. No. 00682 Year of construction 1980 Cutting length 2520 mm Cutting thickness 6 mm Backgauge 750 mm Cutting angle adjustable Hydraulic pressure max. 290 bar Motor power 11 kW Mains connection 400 Volt, 50 Hz - Back gauge with motorized adjustment and mechanical actual value display, fine positioning via handwheel - Manual cutting gap adjustment - Infinitely variable cutting length adjustment - 11 pieces hydraulic sheet metal hold-down device - front angle fence left 1300 mm - 3 front table extensions 1300 mm - electric foot switch - very solid and torsion-resistant welded construction - 1 set of replacement blades - slightly damaged (blade length 2550 mm) - operating instructions Space requirement with table supports L x W x H 3200 x 2800 x 1600 mm Space required for transportation L x W x H 3200 x 2150 x 1600 mm Weight 6300 kg Guedpfx Ajt Ac D Usn Eei Good condition

Condition: used, functionality: fully functional, Guillotine Shear Brand: SAGITA Capacity: 4000 x 8 mm Backgauge capacity: 1100 mm Dimensions: 4750 x 2250 x 1850 mm Weight: 12 t Blade gap adjustment ELGO backgauge Rear sheet support Guodpfx Aoynglnsn Eji

Year of construction: 1984, condition: ready for operation (used), Distance between the uprights: 4300mm, cutting length: 4050mm, blade length: 4200mm, cutting angle adjustable: 1.5-2.5°, min./max. strip width with front gauge: 40mm, min./max. strip width with rear gauge: 1000mm, table height above floor: 850mm, table length: 4200mm, table width: 650mm, with 3 extension arms each 500mm, internal distance between cutting blade and hold-down plus 10mm: 35mm, lower blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, upper blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, guide rulers for square cuts: 1 piece, accessories/special equipment: gauge adjustment, table extension, sheet metal chute, side gauge 1000mm, cutting line illumination, with documentation. An on-site inspection is possible. Gjdpfx Anjy U Nqbo Ejui

Condition: good (used), Year of construction: 1987, Used OMAG plate shear Type CEL 104 Capacity 1100 x 4 mm Gujdezz Ru Eopfx An Esi

Condition: new, Year of construction: 2025, Mechanical sheet metal guillotine METFORMER HCO-2x2000mm The guillotine is made entirely of steel, the structure is solid and heavy. Simple design with good looks. It is easy to use. This guillotine is widely used for cutting thin and medium steel sheets in light engineering, hardware manufacturing. The blade is made of a super strong steel alloy. Technical data: Gedefwmydspfx An Ejui Model, HCO-2x2000, Engine power, kw, 3.0, Maximum sheet thickness (mm), mm, 2, Number of knife changes, pcs, 4, Length, mm, 2800, Width, mm, 1260, Height, mm, 1300, Weight, kg, 1350,

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Gedpfx Aez N Dpksn Eoui

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, sheet thickness (max.): 6 mm, HACO SHEARING MACHINE 3000 X 6 HYDRAULIC MODEL: HSLX 3006 MOTORIZED BACK GAUGE IN GOOD VISUAL CONDITION USED MACHINE, IN WORKING ORDER INTERNAL CODE: SVR 448 Guodpoz Sbxpsfx An Esi

Condition: used, Year of construction: 1987, sheet width 4000 mm Gedpfx Anjyqt E Hj Ejui plate thickness 6 mm distance between columns 4100 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, functionality: fully functional, Year of construction: 1992, machine/vehicle number: 11.205.6002, control type: PLC-controlled, working width: 6,100 mm, sheet thickness (max.): 10 mm, power: 45 kW (61.18 HP), overall weight: 40,000 kg, total length: 70,000 mm, total height: 3,500 mm, Equipment: emergency stop, type plate available, used Helmut Lotze hydraulic plate shear Price negotiable Guedpfx Anoy Tixpj Eji

Condition: used, Year of construction: 2008, sheet width 4100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm no. of strokes 12 - 24 Hub/min cutting angle 1 ° 30 work height max. 865 mm back stop - adjustable 1.0 - 1000 mm down holder 20 Stück Control ENC 100 M column arm 50.0 mm oil volume 200 ltr total power requirement 15.0 kW range L-W-H 5230 x 2250 x 2150 mm weight 11460 kg New price ~ 50,000 euros (!!) Special price on request ----- NC electro-hydraulic swing cut shears * with DURMA "ENC 100 M" control * manual cutting gap adjustment (eccentric) * including pneumatic sheet holding device for thin sheet metal cuts ----- Equipment: - robust electro-hydraulic swing cut shears - including DURMA "ENC 100M" NC control unit * Back stop pre-selection - X axis * Quantity Gjdpjw U U T Tefx An Ejui * Cutting length limitation * Pivoting operation, left front - Monoblock welded steel construction made of high-quality steel - CNC electro-motorized back stop * with ball screw and linear guides * Automatic retraction of the back stop during the cutting process - Light barrier protection for access to the rear of the machine - manual cutting gap adjustment via eccentric - high-performance hydraulic cylinder made of SAM 1040 material - high-quality chrome-plated and finely ground hydraulic piston - split, fold-up finger guard 1,000 mm - easy handling of the sheets via ball rollers in the table - 1x long side stop including mm scale and tilting cam - 3x front support arms - 1x freely movable foot switch - operating instructions Special accessories included: - pneumatic sheet holding device for cutting thin sheet metal - up to max. material thickness - ST .. 3.0 mm

Condition: used, Year of construction: 2008, sheet width 3100 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm Godpfsxaadajx An Ejui down holder 14 Stück no. of strokes 11 - 20 Hub/min oil volume 310 ltr. cutting angle 0.05 - 2.0 ° throat 350 mm table height 900 mm total power requirement 22.0 kW weight of the machine ca. 13400 kg range L-W-H 5.110 x 2.570 x 2.400 mm Current new price approx. 80.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=K4ymYMIJ7_Y ----- Robust electro-hydraulic CNC sheet metal shear with slide guides * Includes CYBELEC "DNC 60 CUT" control system * Includes CNC electro-hydraulic cutting gap adjustment * Includes CNC electro-hydraulic cutting angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with slide guides - Includes CYBELEC CNC controller, model "DNC 60" - CNC electro-motorized backgauge, travel range = 5.0 - 1,000 mm (X axis) * On recirculating ball screws * Automatically folds up at maximum travel, for longer cuts * Includes selectable retraction function ("swing-away function") * Positioning accuracy 0.1 mm * Approx. travel speed 80.0 mm/sec. - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - 1x side stop with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball transfer units in the front support table - Hinged finger guard with safety switch - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Rear sheet chute (sheet inserts) - 1x freely movable foot switch - CE mark - Operating instructions

Condition: excellent (used), functionality: fully functional, Baykal hydraulic guillotine shear type HNC 8100/6 working width 8100 mm maximum sheet thickness 6 mm motorized backgauge automatic blade gap adjustment automatic cutting angle adjustment Gujdpfx Aox Rbhdjn Eji sheet support device