Used Mubea for sale (94)

Condition: excellent (used), Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear Nedpfjx Dclbsx Ahfocu -Manufacturer: Mubea, hydraulic profile steel shear type HIW1000 -Drive: hydraulic -Pressure force: 100 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, notching -Dimensions: 2360/760/H1800 mm -Weight: 2700 kg

Condition: used, sheet width - max. 200 mm Nsdpeg Sx R Rsfx Ahfjcu plate thickness 6 mm flat steel 70 x 7 mm round bar steel 13 mm weight of the machine ca. 50 kg dimensions of the machine ca. 800 x 500 x 1800 mm

Condition: used, Year of construction: 1991, round bar steel 45 mm square edge steel 42 mm L-beam 140 x 13 mm flat steel 350 x 20 mm Ncjdpfx Ajd Ih Stshfeu pressure 550 kN throat 305 mm total power requirement 5,5 kW weight of the machine ca. 1260 kg dimensions of the machine ca. 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure.

Condition: good (used), Year of construction: 1995, 1 used hydraulic punching machine Manufacturer: Mubea Type: KLH 500 / 610 Year of manufacture: 1995 - Punching force: 50 tons - Stroke: 60 mm - Punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 mm in 4.5 mm - Throat depth: 610 mm - with support table Ncodpfewxy Dgsx Ahfsu

Condition: used, Year of construction: 2001, machine/vehicle number: 008147801, Offer 26176 Technical data: - Dimensional stop with digital display 6000 mm - Jaw feed adjustable by handwheel with clamping function - pneumatic stop clamping Nsdpfx Ahezhamdjfscu - Pneumatic connection 6 bar - Space requirement approx. L 7700 x H 1350 x D 900 mm - Weight approx. 1200 kg

Condition: good (used), Mubea Muhr und Bender section shear combined Type: KBL 16 Ncodoncc Hujpfx Ahfeu Dimensions: 200x75x197 cm LxWxH

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear (5) indexing rotary arbors (4) pre-feed rolls 80 to 120 mts/min Max. cutoff lgth: 15 meter track Indexing wire/rod collector 30kW (40HP) AC motor Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 Ncodpfx Ahsfkmr Sjfju 3 vertical payoff units Completely refurbished machine

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm Ncjdpfsu Id Rusx Ahfju air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Ncedpou Ickysfx Ahfsu Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m Njdpfxsxu Dxqe Ahfocu -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! *

Condition: used, Max. punching force: 700 kN Njdjq Iyvvjpfx Ahfjcu Projection: 510 mm Cuts on the flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat iron Quick-change device Assortment of tools is included in the price Weight: 3.000 kg

Condition: used, Pressing force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm at the flat bar shear Foot switch for lift release Quick change device Nodpfxolf Trkj Ahfscu Assortment of tools is included in the price

Condition: used, Year of construction: 1993, Max. punching force: 1000 kN Throat: 510 mm Large support table with material stops on the punching side Electrical contact length stop for the shearing side Hydraulic hold-down device for profile and flat steel shears Cuts 500 x 20 mm on the flat steel shear Holes e.g. 40 mm diameter in 22 mm flat iron Assortment of tools is included in the price Njdpof Nwn Aefx Ahfecu Weight: 5,000 kg

Condition: used, Stanzkraft: 750 kN (punching force e.g. 30 mm hole in 22 mm material), with search device via foot switch for anchoring Overhang: 320 mm Cuts 450 x 15 mm or 300 x 20 mm on the angle/flat bar shear Support table on the punching side Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Nedpfsr R Auzex Ahfjcu Assortment of tools is included in the price

Condition: used, Stanzkraft: 550 kN (punch force, e.g. 30 m in 16 mm material), with detection/inspection arrangement via foot switch for anchoring Ncjdpet Exprofx Ahfeu Cuts 350 x 13 mm or 230 mm on the flat bar shear Overhang: 305 mm Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Support table on punching side Assortment of tools is included in the price

Condition: used, sheet width - max.:200 mm plate thickness:4 mm dimensions of the machine ca.:0,90 x 0,50 x 2,70 m Njdpfx Aecxxn Eshfscu

Condition: used, functionality: fully functional, 1 hydraulic hole punch, manufacturer MUBEA, type HP 1000 / 760. Year of manufacture 1991, punching force 100 tons. Includes punching slide for K 60-K260 and various tools, manually operated linear punching unit (grid rail 4 m), swiveling and with digital display, carriage clamping and foot switch. Dimensions L x W x H 1930 x 780 x 1980 mm. Overhang 760 mm. Working height 1135 mm. Hole diameter 40 mm in 22 mm. Nsdpfx Aoza S Hzehfscu Stroke 0 - 70 strokes. Bdjbmm Avjtv Hzvj Eujc Stroke rate at full stroke 11 strokes. Drive power 8.5 kW. Weight 3800 kg. 3600 kg. Used, in working condition.

Condition: good (used), functionality: fully functional, Punching force: 1000 kN Throat depth: 760 mm Njdsy U Dtkspfx Ahfjcu Stroke release via foot switch

Condition: used, functionality: fully functional, machine/vehicle number: 0171793397124, input voltage: 220 V, input frequency: 50 Hz, used Muhr & Bender HIW 550/510 Price negotiable Ncjdey Tivuepfx Ahfju

Condition: used, functionality: fully functional, machine/vehicle number: 0159689206365, input voltage: 220 V, input frequency: 50 Hz, used Muhr & Bender KLH 500/610 Nodpfey Tit Tox Ahfjcu Price negotiable.

Condition: used, functionality: fully functional, machine/vehicle number: 1028789976479, input voltage: 380 V, input frequency: 50 Hz, used Muhr & Bender Ncedpfx Ajy Tip Ijhfsu Price negotiable

Condition: used, functionality: fully functional, machine/vehicle number: 05073 81 767 830, input voltage: 380 V, input frequency: 50 Hz, used Muhr & Bender KL 1300 Nodpfxoy Tim He Ahfjcu Price: 3000 Euros

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: VP600 760 01, used Mubea VP 600/760 Price: VP Nodsy Tihwspfx Ahfjcu

Condition: used, functionality: fully functional, machine/vehicle number: 0167694409306, throat depth: 760 mm, Equipment: centralized greasing system, used Mubea stamping machine fully functional price negotiable Nsdpfey Ticnex Ahfocu

Condition: excellent (used), functionality: fully functional, control type: manual, working width: 500 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, Sheet width - max. 500 mm Sheet thickness: 3 mm Blade length: 500 mm Nodpfswvvvgox Ahfscu