Used Mubea Kbl for sale (96)

Condition: used, Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: -Scissors: -to cut: -not: -mechanical release: Nedpof Ek H Uofx Alaocw -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg

Condition: good (used), Mubea Muhr und Bender section shear combined Type: KBL 16 Dimensions: 200x75x197 cm LxWxH Nodpfx Aljncc Huoascw

Condition: used, round bar steel 33 mm square edge steel 30 mm L-beam 60 x 8 mm hole diameter in sheet thickness 20 in 13 mm hole punhing press: pressure 35 t hole punching press: throat 320 mm hole punching press: max. length of stroke 24 mm hole punching press: capacity (dia. x thick.) 30 x 9 mm hole punching press: capacity (dia. x thick.) 20 x 13 mm total power requirement 1,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,5 x 0,7 x 1,8 m Profile steel shear with: Ncodpfx Ajx Hp Ahjlasw - Hole punch - Notcher - Foot switch - Machine light - Mounted on a trolley

Condition: used, round bar steel 33 mm Nedpfx Ajvkix Eolaecw square edge steel 30 mm L-beam 60 x 8 mm hole diameter in sheet thickness 20 in 13 mm hole punhing press: pressure 35 t hole punching press: throat 320 mm hole punching press: max. length of stroke 24 mm hole punching press: capacity (dia. x thick.) 28 x 10 mm hole punching press: capacity (dia. x thick.) 23 x 12 mm total power requirement 1,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,5 x 0,7 x 1,8 m

Condition: used, Max. punching force: 700 kN Projection: 510 mm Cuts on the flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat iron Quick-change device Assortment of tools is included in the price Weight: 3.000 kg Nsdpfx Aoq Iyvvslascw

Condition: used, Year of construction: 1993, Max. punching force: 1000 kN Throat: 510 mm Large support table with material stops on the punching side Electrical contact length stop for the shearing side Hydraulic hold-down device for profile and flat steel shears Ncsdpfsf Nwn Aex Alasw Cuts 500 x 20 mm on the flat steel shear Holes e.g. 40 mm diameter in 22 mm flat iron Assortment of tools is included in the price Weight: 5,000 kg

Condition: good (used), Year of construction: 1995, 1 used hydraulic punching machine Manufacturer: Mubea Type: KLH 500 / 610 Year of manufacture: 1995 - Punching force: 50 tons - Stroke: 60 mm Ncedpfx Ajwxy Dgolaow - Punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 mm in 4.5 mm - Throat depth: 610 mm - with support table

Condition: used, Price: On request Iron worker, punch press and section shear  Including Length-Stop Hersteller: Mubea / Muhr & Bender Type: Hydraulic Type: KBLH 1000 Capacity: 110 ton Shear plate: 200x26mm, 500x20mm Notching: 85x75x16mm Throat: 510mm Machine-weight: 4600kg - Documentation available: No - CE certificate present: No - Drive: Hydraulic - Punching force [ton]: 110 - Punch throat depth [mm]: 510 - Options: Length stop Nedewnhd Hepfx Alascw Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1986, Max. punching force: 700 kN Projection: 510 mm Cuts on the flat steel shears 500 x 18 mm Ncodof Nwqdspfx Alaew Holes e.g. 30 mm diameter in 20 mm flat iron Assortment of tools is included in the price Weight: 3,000 kg

Condition: used, Max. punching force: 700 kN Projection: 510 mm Cuts on the flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat iron Ncjdpfx Ajumluqolajw Support table on punch side with stops Assortment of tools is included in the price Weight: 3.000 Very good condition

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0156084906226, Offer 23145 Hydraulic Flat, Profile, and Bar Steel Shear with Notching Device and Punching Unit Technical Specifications: - Flat Bar Shear - Blade length: 420 mm - For flat material: 400 x 15 mm - Profile Steel Shear - No blades installed - Angle steel at 90°: 110 x 10 mm - at 45°: 65 x 8 mm - T-steel at 90°: 90 x 10 mm - Bar Steel Shear - No blades installed Nodpfxjy Ddv Rj Alajcw - Round steel / Square steel: 35 / 32 mm - Notching device - For material up to 12 mm - Triangular notching: T 60 mm - Punching unit - Punching force: approx. 500 kN - Stroke, infinitely adjustable: 0 - 40 mm - Punches steel up to 30 mm Ø in 15 mm - Throat depth: 410 mm - Hydraulic drive: 400 V / 7.5 kW - Space required: approx. W 1400 x H 1800 x D 700 mm - Weight: approx. 1800 kg - Includes: various punches and dies, support/stop table, triangular notching unit, 2 foot pedal switches

Condition: ready for operation (used), A hydraulic profile-steel/universal steel shear with integrated punching unit Muhr & Bender is available. Punching force: 500kN, punching capacity for 15mm steel: 25mm, punching stroke: 60mm, stroke rate: 47/min, throat depth: 750mm, installation height: 215mm, working height: 1150mm, flat-steel cutting capacity X/Y: 180mm/20mm. Machine dimensions X/Y/Z: approx. 1500mm/900mm/1900mm, weight: approx. 2000kg. Includes various round and slotted punches with dies. An inspection on site is possible. Njdpfx Ajx E Adpjlascw

Condition: good (used), pressure 100 t punching cross-cut in cmm 40.0 in 22.0 mm ST stroke 120 mm column arm 760 mm total power requirement 8.5 kW weight of the machine ca. ca. 3.800 kg dimensions of the machine ca. ca. 2500 x 1700 x 2000 mm Original price, including stop system: approx. 45.000 euros Special price available upon request Features: - Robust / heavy-duty hydraulic hole punch - Punch stroke continuously adjustable - NC stop system "MUBEA MATIC 82" * Travel range in X and Y axes * With "FAGOR" control unit * Includes large support table * Separate control cabinet - Various (custom) punching tools (see Figure 9) - Front safety guard, including sheet metal scraper - 1 freely movable foot switch - Operating instructions for machine and stop system Ncjdezn Ahkspfx Alaew

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, Nodpsznu Aysfx Alascw -Stamping tool: Die holder with fine adjustment -Bore: Ø 25 mm -Dimensions: see photos -Dimensions: 300/250/H210 mm -Weight: 32.1 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, -Punch tool: Intermediate block -Bore: Diameter 65 mm -Dimensions: see photos Ncsdpeznklqefx Alasw -Dimensions: 370/250/H125 mm -Weight: 46.7 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, Nodpfx Aszniqrolaecw -Punch tool: for holding dies -Hole: Ø 100/43 mm -Dimensions: see photos -Dimensions: 345/280/H245 mm -Weight: 55.9 kg

Condition: good (used), Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punching die, knife plate -Manufacturer: Mubea, cutting plate shearing tool for square steel / round steel -Item No.: Square steel: 27x27 mm / 50x50 mm -Round steel: Ø 31/56 mm Ncjdpfx Aljznadvjaew -Number: 2x shearing tools available -Price: per piece -Dimensions: 185/185/H40 mm -Weight: 8.8 kg/pc.

Condition: used, Max. Stanzkraft: 500 kN Nodeu T Nv Dspfx Alaecw Reach out: 610 mm Quick change device Variablely adjustable spindle Inclusive assortment of punches and dies Weight: 1700 kg Very good condition

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Ncodpozkmi Djfx Alaow Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 75 mm -Type: Mubea 75 5-9 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.6 kg Ncedpfjiqhgqox Alaew

Condition: good (used), Die holder, notching tool, punching tool, punch, punching die, punching punch, punching die, round die, die reduction -Manufacturer: Mubea, punching tool holder die reduction Ncodpsiqhhcjfx Alasw -Type: 105 - 80 mm mounts -Dimensions total: Ø 150 x 60 mm -Weight: 4.7 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, Nsdpfjiqhh Isx Alascw -Manufacturer: Mubea, punching tool square Ø 52 mm -Type: Mubea 52 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 125 mm -Weight: 6,8 kg

Condition: good (used), Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears, punching and notching machine Njdpfxetxkn Uj Alajcw -Manufacturer: Mubea, profile steel shear punching and notching machine type HIW 600 -Pressure force: 60 to -Applications: punching, shearing, cutting, notching -Punching: Throat depth 260 mm -Accessories: incl. punching tool, see photos -Dimensions: 1470/960/H2140mm -Weight: 1283 kg

Condition: used, Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punch punch -Shearing tool for T-steel: 120 x 70 mm -Square: 25 mm -Round: 27mm -Type: 50305 -Dimension respectively: 175/140/15 mm Ncjdpfocwf Dcjx Alaew -Weight: 5kg

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Manufacturer: Mubea, sheet metal and round steel shear type 3/5 R -Cutting insert length: 200 mm -Steel sheet: up to 8 mm -Lift-down device: Njdeiachnopfx Alajcw -Overall dimensions: 385/160/H1280 mm -Transport dimensions: 960/160/H390 mm -Weight: 22 kg