Used Mc for sale (1,742)

Condition: repair required (used), Year of construction: 1998, operating hours: 6,000 h, functionality: limited functionality, spindle bore: 43 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 221 mm, total length: 2,500 mm, total width: 1,700 mm, type of input current: three-phase, overall weight: 3,750 kg, Equipment: documentation/manual, We are offering this Spinner TC46-MC CNC lathe, manufactured in 1998, which requires repairs. The turret needs to be overhauled. The machine is powered on. Otherwise, it has no other defects. Fgsdez Ekq Espfx Al Uoh Serial number: 040235 Type: TC46-MC Voltage: 3 × 400 V Current: 50 A Frequency: 50/60 Hz We will gladly load the machine onto a truck for the customer using a forklift. If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2017, functionality: fully functional, X-axis (planar travel): 195 mm (approx. 7.67 inches) Z-axis (longitudinal travel): 400–430 mm Tailstock travel / quill travel: 100 mm (quill stroke) Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min C-axis (spindle indexing): 0.001° (for driven tools / MC version) Center height: 1,000 mm Max. spindle speed: 3,500 rpm Max. chuck diameter: 10 inches Max. chuck speed: 4,200 rpm Max. working area (diameter x length): Ø 325 mm x 302 mm Machine weight: 4,350 kg Operating voltage: 3 PE / 220 V (AC) Rated frequency: 50 Hz Electrical connections / power: 30 kVA Rated current: 100 A Short-circuit current strength: 5 kA Largest motor: 80 A Circuit breaker capacity: 100 A Switching capacity of protective device: 50 kA Fodpfxoz Hwaio Al Uogh Compressed air supply: 0.5 MPa (5 bar)

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Max. turning diameter. 400 mm Turning length. 650 mm Circumferential diameter. 600 mm X-axis travel. 275 mm Z-axis travel. 700 mm Bar capacity. 85 mm Main spindle. 3,400 rpm for 85 mm bore Spindle nose. A8 / DIN A8 Fedpfxez Hyy Eo Al Usgh Chuck Driven tools. MC = Milling/driven tools Control system. Siemens 16-station BMT45 turret, axial - all stations driven Chip conveyor in the tailstock High-pressure pump, 15 bar Siemens Sinumerik One Measuring probe for tool measurement in the work area Direct measuring system in the X-axis Automatic door

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Fgsdozti Tkspfx Al Ueh Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. This equipment has very few operating hours.

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 300 h, Equipment: ABS, The printer is in almost new condition and has been used very little. Fedjz Ep Dkspfx Al Uegh

Condition: good (used), Year of construction: 2008, functionality: fully functional, CNC control Fanuc Oi-TC 12-fold revolver driven tools Fgodjz Nwtvspfx Al Uoh C-axis chip conveyor tail stock coolant device Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 550 mm max. Drehdurchmesser / max. turning diameter 260 mm X-Weg / X-travel 170 mm Z-Weg / Z-travel 335 mm max. Stangendurchlass / max. bar diameter 51 mm Drehzahl / spindle speed 4500 UpM /rpm Drehzahl angetr. WKZ /speed of driven tools 5000 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X / rapid feed X 36 m/min Eilgang Z / rapid feed Z 36 m/min. Gewicht der Maschine ca. / weight ca. 3280 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, EMCO EMCOMAT FB-450 MC | DEMO | Sinumerik 828D | Warranty Description EMCO EMCOMAT FB-450 MC – DEMO machine in like-new condition Universal CNC toolroom milling machine equipped with a SIEMENS Sinumerik 828D control. The machine was manufactured in 2019 and has never been used in production. It was used solely as a demonstration machine and has very low operating hours. The machine is in excellent, near-new condition and is offered with extensive accessories included in the price. 6-month warranty on spare parts included. Fgodpez Dib Tofx Al Ueh The EMCOMAT FB-450 MC is a highly versatile machine suitable for toolrooms, prototype production, maintenance departments, and precise single-part or small-batch production. It allows both vertical and horizontal milling. Technical specifications Working area X-axis travel: 450 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Spindle center distance: 40–440 mm Rapid traverse X/Y/Z: 5,000 mm/min Working feed X/Y/Z: 10–5,000 mm/min Feed force X/Y/Z: 10 / 10 / 15 kN Table Clamping surface: 800 × 400 mm Maximum table load: 300 kg Spindle Spindle speed: 10–5,000 rpm Spindle power: 10 kW Tool interface: ISO 40 Machine CNC control: SIEMENS Sinumerik 828D Dimensions (L × W × H): 1,980 × 2,030 × 1,990 mm Machine weight: approx. 2,270 kg Year of manufacture: 2019 Included equipment SIEMENS Sinumerik 828D CNC control Electronic handwheel Rotary table/turntable for vice Support arm for horizontal milling Installation rubber pads Side storage holders for 27 milling tools Set of 12 ISO 40 milling tool holders, including holders for horizontal milling Machine manual 6-month warranty on spare parts Condition DEMO / LIKE NEW The machine has never been used in regular production and was operated only for demonstration purposes. Machine can be inspected and demonstrated under power by prior appointment. Available for delivery.

Condition: ready for operation (used), Year of construction: 2010, Make: SPINNER Type of machine: TC 400-52 MC Year of manufacture: 2010 Control system: Siemens SINUMERIK 840D SolutionLine Machine's weight: 4.000 kg Tool holder: VDI 30 / DIN 69880 x-travel: 200 mm y-travel: nicht vorhanden Fgodpfx Aoz I Nawsl Ujh z-travel: 515 mm Speed range: bis 5.000 U/min Spindle lock: A6 Cutting diameter: 280 mm Driven tool: Ja Turning length: 500 mm Chip removal device: Ja Tailstock: Ja, hydraulisch / MK4 Overall dimensions: 2.100 × 1.350 × 1.800 mm (ohne Stangenlader) Chuck size: 210 mm Chuck size: 210 mm Traverse Z-axis: 515 mm Tool turret - slots: 12 Counter spindle: Nein C-axis: Ja Spindle opening: 52 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Niles N 40 MC - 6000 Turning/Milling Center, year of manufacture 2019, Siemens SI 840 D SL control, X/Z 850/6820 mm, Y axis -200 / +400 mm, B axis 0.001°, B axis swivel range -105° / +95°, tool changer with 192 positions, C axis main spindle 0.001°, spindle speed up to 1750 rpm, 2 gear stages, max. workpiece weight between chuck and tailstock 6,000 kg, drive power 87 kW, HSK 100 interface, steady rest 70 - 425 mm, tailstock. Fsdjz Dgw Sepfx Al Usgh

Year of construction: 2019, operating hours: 253 h, condition: used, functionality: fully functional, empty load weight: 20,200 kg, fuel type: electric, total length: 5,400 mm, lifting height: 13,000 mm, mast type: simplex, construction height: 2,000 mm, drive type: Elektro, load capacity: 16,000 kg, construction width: 2,070 mm, Other Mast type: Standard Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Fsdpfx Alsz Aly Es Usgh Rear tire type: Superelastic Rear tire condition: 80 - 100% Description: Hydraulically adjustable boom + 60°/-9°, Non-marking tires with tread, Charger internally installed, Battery with water filling system, Mobile head (new mobile head), Radio remote control for all crane movements, 2 cameras (front right and rear center), Distributed counterweights (removable with pallet truck), Aluminum protective boom tip 11 t, Aluminum boom extensions 7 t, Operator cabin with door, Warning light, Fire extinguisher

Condition: excellent (used), Year of construction: 2015, operating hours: 300 h, functionality: fully functional, machine/vehicle number: NRX20151106, turning diameter: 150 mm, spindle motor power: 7,500 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 220 mm, type of input current: three-phase, total height: 2,200 mm, total length: 5,000 mm, total width: 3,000 mm, spindle nose: JIS A2-5, overall weight: 5,600 kg, CNC - Double Spindle Turning and Milling Center DMG MORI - NRX 2000 MC Double Front Spindle Simultaneous Parallel Machining Tool Drive Portal Loading Tool-Piece Carriage 14 pos. (Ø 40 - max. 150mm) approx. 300h Spindle-hours. Technical details / additionals / accessories number of spindles 2 swing diameter max. 348 mm turning diameter max. 150 mm standard turning dia. 120 mm turning length max. 80 mm distance between spindles 670 mm control COMPACTline M73 Workspindle: number of spindles 2 max. spindle speed max. 5,000 min/-1 power capacity 7.5 / 5.5 kW spindle nose JIS A2-5 chucking diameter 200 mm C-Axis 0.001 ° turret: Number of Turret 2 number of tool positions 10 pos. Shank height for square tool 20 mm Drill shank diameter 32 mm turret change time 0.31 sec. Driven Tool Stations: driven station 10 pos. Spindle speed - driven tool stations max. 10,000 min -1 power capacity - driven tool-stations 1.5 / 1.2 kW Fedpfx Ajzuauzol Uegh movement areas: x-axis 1+2: 100 mm z-axis 1+2: 220 mm C - Axis 1+2: 360° feeds: rapid traverse ( X / Y / Z ) 30 m/min feed speeds max. 30,000 mm/min Tip feed 0 - 5,000 mm/min total power requirement 32 kVA weight of the machine approx. 5.6 t dimensions of the machine approx. 5.0 x 3.0 x 2.2 m Chip conveyor Coolant system electric hand wheel gantry loader Workpiece-storage Tool drive mechanism

Condition: ready for operation (used), Year of construction: 2007, Make: SPINNER Type of machine: MC 650 Year of manufacture: 2007 Control system: Siemens 810 D Machine's weight: 9500 kg Fodpfxez I Nlys Al Usgh Tool holder: SK 40 x-travel: 650 mm y-travel: 450 mm z-travel: 460 mm Speed range: 8000 1/min Overall dimensions: 3,6 × 2,2 × 3,0 m Table dimensions: 710x450 mm Number of tools in the magazine: 32 Pl.

Condition: good (used), Year of construction: 2011, turning length: 225 mm, turning diameter: 260 mm, travel distance X-axis: 170 mm, travel distance Z-axis: 335 mm, There are 2 more machines of the same design with identical equipment. Machine type: CNC lathe Manufacturer: Hwacheon Type: Cutex-160A MC Year of construction: 11/2011 Control: Fanuc 0i-TD Country of origin: Korea Delivery time: ex-stock >>Powered tools >>Turning and milling spindle >>Including tailstock >>Including bar loader magazine >>High productivity This CNC lathe is in good condition. Thanks to the basic and additional equipment, the machine has short indexing times for the turret and a high rapid traverse speed. The 3-axis machining and the additional turning and milling spindle allow workpieces to be processed in a versatile and efficient manner. The additional tailstock and the associated short bar loader magazine increase the productivity of the manufacturing process. An economically effective used machine for series production. Machine equipment Chip conveyor for side mounting and chip bucket Short bar loader magazine Interface for bar feeding device Workpiece collection tray (parts catcher) Turning and milling spindle Confirmation switch for chuck (open/close) C-axis indexing Powered tools Tailstock, adjustable Linear guides Technical data Fodpfsz Azxwex Al Uegh Performance Swinging diameter over bed: 550 mm Max. turning diameter: 260 mm Max. turning length: 225 mm Chuck size: 6" Spindle Spindle nose (ASA): A2-5 Max. spindle speed: 6000 rpm Spindle bore Ø: 56 mm Max. bar diameter: 45 mm Spindle motor: 15/7.5 kW Turret Turret number of stations: 12 positions Turret indexing time (s/stations): 0.15 Feed rates Rapid traverse X-axis: 36 m/min Rapid traverse Z-axis: 36 m/min Max. travel X-axis: 170 mm Max. travel Z-axis: 335 mm Feed motor X/Z: 3.0/1.8 kW Tailstock Arbor diameter: 60 mm Arbor stroke: 80 mm Taper bore/tailstock mounting: 4 MK Turning-milling spindle Spindle motor 3.7/2.2 kW Max. spindle speed: 5000 rpm Bar loader magazine Manufacturer: Fedek Machine Co. Type: DH-65 Min./max. bar length: 280/1200 mm Bar diameter: 5-65 mm Dimensions L x W x H: approx. 1620 x 620 (1200) x 1400 mm

Condition: used, Year of construction: 2011, 5 machines are only sold as a PACKAGE. Includes a large set of tool holders, fixed + driven. 1. CNC turning center, 3 units Manufacturer: Traub Type: TNL 26 Year of manufacture: 2011 / 2008 / 2006 Operating hours: 64,154 / 75,849 / 81,823 Control: Mitsubishi TX 8i Equipment: - Main spindle - Counter spindle - Upper turret - driven + Y-axis - Lower turret - driven + Y-axis - Front tool holder - driven + Y-axis - Rear tool holder - Bar loader 2x FMB / 1x Breuning Includes tools for the TRAUB machines Tools + clamping devices: - 54 x driven tool holders - 181 x fixed tool holders - Collets, etc. See photos The machines come from ongoing production. 2. CNC lathe, 2 units, one defective Manufacturer: EMCO Type: Turn 332 MC Year of manufacture: 2010 / 2008 Operating hours: unknown Control: Siemens Sinumerik 840D Equipment: - Main spindle - Counter spindle Fodpfx Alozxhxve Uogh - Upper turret - Lower turret - Bar loader TOP ETL 8-45 One machine comes from ongoing production, one has already been used as a source of spare parts, several components have been removed. Dismantling and loading can be organized by a specialist company for an additional fee.

Condition: excellent (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 21O0400016-04, total height: 6,557,000 mm, total width: 2,450,000 mm, total length: 8,290,000 mm, type of input current: three-phase, input voltage: 380 V, power: 90 kW (122.37 HP), Equipment: CE marking, type plate available, The Mixer is a machine designed to blend materials of different consistencies, such as pruning residues and digestate, within the composting process. Feeding can be automatic via conveyor belts or manual using a loader operated by an operator. The machine is in nearly-new condition and can be applied in various fields; it can be inspected and tested, including with specific products. Fsdpfx Aljw Tir Ij Usgh

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a high-performance DIMECO LINAPUNCH MC-F CNC coil punching system for the automated processing of strip material directly from the coil. This system is particularly suitable for the economical production of perforated sheets, mounting plates, fastening rails, ventilation components, and customer-specific punched parts in medium to large quantities. Direct processing from the coil significantly reduces material consumption, setup times, and per-piece costs. The LINAPUNCH technology combines the flexibility of a CNC punching machine with the productivity of a continuous coil line. The system operates with standardized thick-turret tools and enables highly productive manufacturing processes. Technical data: Manufacturer: DIMECO Type: LINAPUNCH MC-F Machine type: CNC coil punching system / punching line Control: CNC, Siemens Simostar 370 Coil processing: Coil inner diameter: 508/610 mm Coil outer diameter max.: 1700 mm Coil weight max.: 6000 kg Strip width min./max.: 170 to 525 mm Material thickness: 0.4 to 3 mm Product length max.: 6000 mm Feed length programmable Servo-controlled NC strip feed Automatic strip guidance Punching technology: Punching force: approx. 20 t Multi-axis punching system (X/Y axis) Programmable punching stroke Auto-index function Multi-index function Tool holder for standard thick-turret tools Number of punches: 26 pieces Number of punching heads: 1 piece Number of revolving tool stations: 2 Consisting of: Coil unwinder Leveling unit NC feed LINAPUNCH MC-F punching head Shear Ink marking unit Drop table stacker 2 lifting tables Control panel with CNC control Safety enclosure Application areas: Electrical industry Switchgear construction Ventilation and air conditioning technology Metalworking Profile and component manufacturing Series production from coil material EXW, assistance can be provided with dismantling and loading. Fgodpfx Ajzmv Dvel Ujh

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, total height: 2,300 mm, total length: 4,800 mm, total width: 2,550 mm, feed length X-axis: 280 mm, feed length Y-axis: 100 mm, feed length Z-axis: 900 mm, overall weight: 8,500 kg, The machine comes from a well-maintained company. Control system: 840D. Accessories as shown in the pictures. Fodpfxjz Dw Dpo Al Ujgh

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 132542, turning diameter over cross slide: 470 mm, turning length: 300 mm, turning diameter: 580 mm, spindle bore: 62 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 380 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,839 mm, total length: 1,865 mm, total width: 1,734 mm, overall weight: 3,200 kg, Equipment: documentation/manual, OKUMA LB2000EX-MC x 300mm OSP P200L CNC-Controller Fsdpfx Aoxrnr Njl Uegh Number of axis - 3 Swing over bed - 580mm Swing over cross slide - 470mm Max dia. turning - 360 mm Max turning length - 300 mm X axis travel - 260 mm Z axis stroke - 390 mm Rapid X-axis 25,000 mm/min Z axis rapid 30,000 mm/min Spindle nose - Flat Main spindle speed - 6000 rpm Main spindle power - 11 kW Main spindle diameter - 100 mm Kitagawa 6 inch chuck Driven tools - 6000rpm Driven tools - 5,5kW Turret type VDI 12 Stations Square tool section - 20mm Boring bar section - 32mm Tailstock Quill diameter - 70mm NC tailstock stroke - 415mm Konus - MK 4 Chip conveyor type high Wight - 3200kg One Touch dialog with colour High presure coolent

Condition: good (used), Year of construction: 2008, functionality: fully functional, CNC lathe Okuma LB 3000 EX MC 500 Control: OSP-P200L Year of manufacture: 2008 Internal machine number: 69 Turning length: 500 mm Turning diameter: 340 mm Swinging diameter over bed: 530 mm Spindle speed: 4,200 rpm Tool holder: BMT 60 Tool turret, 12 stations (powered) Fgsdpozwlw Tefx Al Ush C-axis: 0.001 degrees Equipment: - One-touch IGF - Chip conveyor - Touch setter - 3-jaw chuck Kitagawa B-210 - NC tailstock

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10024150, Sewing machine Muller Martini Ventura MC-200, Machine speed* Mechanical of 18 to 200 cycles/min, max. 12 000 cycles/h, min. signature length 120 mm, max. signature length 510 mm, min. signature width 75 mm, max. signature width 320 mm, max. signature thickness 4 mm, Lap opening min. 8 mm, low or high folio lap, Stitches Number of stitches standard 13, staggered 14, Stitch length 16.5 mm with/without blind stitch possible for all stitch types Sewing machine Muller Martini MC 200 Fgjdpfx Alsx Rywko Ueh

Year of construction: 1999, operating hours: 47,973 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20472666, Complete compounding and granulation system based on a co-rotating twin-screw extruder, Krupp Werner & Pfleiderer ZSK 50, manufactured in 1999. The system is suitable for compounding, processing, and regranulating thermoplastic materials. Previous process: ABS recycling The system consists of: Twin-screw extruder ZSK 50 Mc 900 with a process length of 36 L/D Drive power: 181 kW Screw speed: up to 1200 rpm including water ring vacuum pump and water cooling including Autotherm temperature control unit including strand die head Multi-component dosing and material feeding system from Colortronic - Graviblend (manufactured in 1999), gravimetric, with 5 gravimetric feeders, including vacuum material conveying with Busch vacuum pump, type RC 0160, suction via suction lances Downstream: Ettlinger melt filter, type ERF 200 with 1250 cm² filter area for up to 900 kg/h Fsdpfx Ajzn Um Eel Uogh Water bath, 4.0 m, including heat exchanger Granulate air blower Scheer strand granulator SGS 200-E5, manufactured in 2011 Classification vibration screen Cooling screw conveyor Control cabinets included. The system is currently still assembled and can be inspected under power until the end of September.

Condition: used, Year of construction: 2008, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2008 Control : Siemens 840D - Powerline Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Röhm KZZT-AF 65/6 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, Röhm KFD-HE 210 Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Fgsdpfxsz Hh A Ie Al Uoh Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Toolmeasurement:Automatic Measuringarm, Marposs Rawmaterialfeed:Barloader, EMCO TOP-Load 10-65 (TOP Automazioni ETL 10-65) Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Electrostatic extraction, Bristol EF David Toolholder:Misc. static and driven toolholder Further Equipment:Spindlechiller

Condition: used, Year of construction: 2004, Seven UNIVERSAL MC flat knitting machines are available as a package, 1) UNIVERSAL MC-825 CXL, gauge: E3, year of manufacture: 2004, width: 64in/1630mm, 2) UNIVERSAL MC-835, gauge: E5, year of manufacture: 2004, width: 48in/1220mm, 3) UNIVERSAL MC-720, gauge: E5, year of manufacture: 1995, width: 90in/2300mm, 4) UNIVERSAL MC-720, gauge: E8, year of manufacture: 1995, width: 90in/2300mm, 5) UNIVERSAL MC-720 PJ, gauge: E8, width: 90in/2300mm, 6) UNIVERSAL MC-720 PJ, gauge: E10, width: 90in/2300mm, 7) UNIVERSAL MC-720, gauge: E10, width: 90in/2300mm, documentation partially available, an on-site inspection is possible, not connected to power. Fsdsz Euc Espfx Al Usgh

Condition: ready for operation (used), Year of construction: 1999, Vertical machining center / EUMACH MC 1050 P - Heidenhain 426 -CE marking -Heidenhain 426 control system -Oil cooler -COMPLETE TECHNICAL SPECIFICATIONS – SEE PHOTOS Fgjdpfx Aezmqigjl Ush -Complete documentation Dimensions: L x W x H 2.8 x 3.45 x 2.8 meters / Weight: 6500 kg Errors and omissions excepted.

Year of construction: 2022, condition: used, Uplifter mini crane MC 285-3 CWME, lifting capacity 2,820 kg at a radius of 1,400 mm. Maximum lifting height: 8,700 mm. Maximum working radius: 8,200 mm (at a load of approx. 150 kg). Equipped with assembly jib and transport cart UPT 200. Less than 100 operating hours. Storage location: at customer site. Fodpfxoytrd Te Al Ujgh