Used Annealing Furnace for sale (790)

Condition: excellent (used), Annealing furnace Make Naber Type 41 S 12 kw YEAR OF MANUFACTURE 1972 Dimensions of the annealing chamber : width 350 mm height 220 mm depth 500 mm Transport dimensions : Length 1350 mm Width 850 mm Height 1560 mm with pallet Weight 320 kg Nwodpfx Aorwfqnsg Isc

Condition: ready for operation (used), Heraeus MR 170 E muffle furnace / annealing furnace / oven Maximum temperature: 1000°C Internal dimensions: 295mm x 175mm x 95mm (D x W x H) You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you present a valid VAT identification number. Subject to prior sale. Visit our shop to see more of our offers. Nwjdpfoynhm Hjx Ag Iec Company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data deviations and errors in the article description may occur and are subject to change.

Condition: good (used), Make: ELIOG Year of manufacture: 1992 Njdeym U Sgspfx Ag Iewc Opening (W x H x D): 150 x 110 x 350 mm Temperature: up to 1,350 °C Nominal power: 4 kW Connection load: 5 kW Accessories/Equipment: separate control cabinet Condition: good Total weight: 170 kg Furnace dimensions: 500 x 600 x 430 mm Control cabinet dimensions: 450 x 550 x 700 mm

Condition: new, # suitable for treatment under inert gas # with rapid cooling by fan external dimensions (w x h x d): 1500 x 1600 x 2500 mm useable dimensions (w x h x d): 750 x 600 x 1100 mm temperature: 1200°C electrical heated: approx.. 42 kW Nodpjcdi R Eofx Ag Iowc charge weight: 700 kg

Condition: used, Hardening furnace, muffle furnace, chamber furnace, annealing furnace HERAEUS Type KR 260 Serial No. 4412 Year of manufacture approx. 1972 Temperature range 850° (max. 1150°C) Internal dimensions W x D x H 240 x 450 x 140 mm Connected load 8 kW Power supply 380 Volt, 50 Hz, 20 Amp. - According to temperature indicator, furnace reaches max. 850° in approx. 1 hr 45 min. - In practical test, at 850° C (per indicator) the furnace switches off electrically. Nwjdjydqd Tjpfx Ag Isc - Temperature display - Temperature setting via 4 switching stages and potentiometer Space requirement L x W x H 750 x 900 x 1600 mm Net weight 160 kg

Condition: ready for operation (used), A long furnace Löcher with charging trolley operation is available. The furnace was part of a bending plant for the production of flange rings. Interior dimensions X/Y/Z: approx. 14000mm/500mm/1500mm, max. temperature: 1200°C, total furnace dimensions X/Y/Z: approx. 4100mm/3850mm/16000mm, control: CNC. The machine has a control defect. Documentation available. On-site inspection is possible. Nsdpewkiipefx Ag Iowc

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Nedpovxvgrsfx Ag Iewc

Year of construction: 1991, condition: ready for operation (used), Working/ nominal temperature: 800/ 850°C, inner dimensions: 1100x500x260mm, heating output: 120kW, connected load: 1.5kW, with documentation, without accessories or spare parts, an inspection is possible. Nwjdpfxopcgzgo Ag Isc

Condition: ready for operation (used), Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible. Nwedpjq Ttz Esfx Ag Ioc

Condition: used, Year of construction: 2011, Technical details: temperature min.: 1 ° temperature max.: 199 ° electrics - voltage/frequency: 380 / 50 V/Hz heating capacity: 1,8 (1800 Watt) kW protection class: IP 54 total power requirement: 16,2 kW weight of the machine ca.: 0,93 t dimensions L x W x H: 2,85 x 2,0 x 1,4 m Pre-polymerization tunnel - Heat treatment tunnel Application: drying for washing and painting lines - pass through Sold as is and described! other features: -recommended temperature according to manufacturer max. 80°C; safety setting 90°C; heating 230V -with chain conveyor/feed line made of Teflon Nwjdpfx Asu Nw E Ueg Ioc -chain width 200mm -max. workpiece width 150mm passage W: 150 x H: 110mm, running height 600mm; operation motor SEW Eurodrive (gear motor) power 0,18kW loading W x H: 500 x 800mm unloading door W x H: 600 x 1200mm access door W x H: 800 x 980mm with safety locking system room height 1400mm *

Year of construction: 2017, condition: good (used), functionality: fully functional, Furnace Housing Dimensions External dimensions: - approx. 3,800 x 4,300 x 2,200 mm Internal (usable) furnace dimensions: - approx. 2,440 x 1,400 x 1,200 mm Batch Load weight: - 9 boxes (net weight 50 kg/each) - approx. 250 kg material per box - stack arrangement 3x3 Performance Data - 1 gas recuperator burner - 160 kW rated heating capacity - Max. allowable chamber furnace temperature 720°C Njdpfx Aexcybkjg Iswc - Max. allowable post-combustion temperature 1,020°C - 1 temperature control zone Temperature Control Range - Chamber furnace 480°C – 700°C - Post-combustion 850°C – 1,000°C Supply Media - Natural gas L or H - Gas inlet pressure 80 mbar - Voltage 400 V - Frequency 50 Hz - Connected load 8 kVA - Compressed air 6 bar, dry, oil-free Material: e.g. brass or bronze

Condition: good (used), Year of construction: 2002, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Nwsdpswg Hlaofx Ag Isc Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: ready for operation (used), Heraeus MR 260 annealing furnace Internal dimensions: 260mm x 500mm x 160mm ( W x D x H ) Space requirement: 1100mm x 700mm x 1560mm ( L x W x H ) Weight: 150 kg Nominal temperature : 1000°C Nwodpfxjrm R Eye Ag Ioc You are welcome to visit us for an inspection. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: like new (used), Chanber size: 280x180x500mm upper Nwedpfxjd Sm Die Ag Iec 280x130x450mm lower Max temperature: 700 C °

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. Nwsdpfxjq Nyzbe Ag Ioc 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: ready for operation (used), Door glass present Interior dimensions: Width: 340 mm Height: 355 mm Nwodsyk Et Nopfx Ag Ijc Depth: 360 mm Rated temperature: 500° C

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Max temperature: 1000°C Nwodpfx Agsxcb Hno Ijc

Condition: good (used), Year of construction: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Number of baskets per oven: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Load: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Max. temperature: 600 °C Operating temperature: 510 °C Total heating capacity: 2 x 81 kW = 162 kW electric Quenching water bath: Type = QT-24.16.57/71E Temperature bath max.: 70°C, chamfering volume = 20 m^3 Nsdpfx Ageyiaf Ij Iowc 2 ageing furnaces: Type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Oven temperature max.: 250°C Operating temperature: 180 °C Total output: 2x 40.5 kW = 81 kW Electrical storage/retrieval section, Gea cooling coil, protective housing, safety equipment, system control 1,056 annealing baskets with stanchion pallets System already dismantled, packed and stored

Year of construction: 2009, condition: excellent (used), functionality: fully functional, Equipment: CE marking, type plate available, Induction furnace for heating steel with dimensions up to 550mm in length, 100mm in width, and 20mm in thickness. The furnace is connected to a feeder for small rods with dimensions from 10x10 to 22x22 and a length of up to 300 mm. The hopper feeder sorts the parts and automatically loads the inductor with consecutive pieces for heating. The feeder is ideal for producing large nails, screws, etc. Its operation can be seen in a YouTube video. The efficiency is very high. For small elements, heated parts at 1100 degrees are retrieved every 6 seconds. We have two inductors for the furnace to heat materials with thicknesses up to 20mm and up to 16mm. It is possible to modify the furnace to suit your needs. Replacing the inductor with other sizes costs approximately 3000 EUR. The machine is very versatile in terms of the sizes of heated products. It is possible to heat flat bars, round rods, or square rods. Nwedpsw Hqldjfx Ag Iec

Year of construction: 2012, condition: excellent (used), functionality: fully functional, machine/vehicle number: 9349-0010, Used: rotary hearth furnace / mandrel hardening press Manufacturer: Aichelin Model: Drehherdofen Aichelin RDGs 270 Control: Siemens S7-300/317-2 PN/DP Year of manufacture: 2012 Max. temperature: 950 °C GAS Nsdew Rrxfjpfx Ag Iswc

Year of construction: 2012, condition: used, Technical details: max. temperature: 700° - übliche Temperatur: 400 - 650°C Grad size of opening: B: ca. 2200 x T: ca. 3800 x H: ca.1100 mm program control: Siemens S7/300 IM 151-7 interface: Ethernet container volume: Ofen-Volumen: 9,2 m³ l control voltage: 24 / 230 Volt current type: 1P/PEN; 50 Hz Voltage: 400 V elect. connected power requirement of heater: 3 x 3 x 21 kW = 189 kW flow rate: 3 x ca. 9.000 = 27.000 m³/h weight of the machine ca.: 8,0 t Nwodou R Dhxspfx Ag Ijc dimensions of the machine approx. HxWxD: ca. 3.9 x 3.8x 4.8 m dimensions electric cabinet: ca. B: 2.400 x T: 400 x H: 2.000 mm transport dimensions LxWxH: ca. 5,2 x 3,6 x 2,9 m Electrically heated circulation oven Electric annealing furnace whose housing is made of profiled sheet steel and lined with lightweight refractory bricks/ firebricks. Application/processes: mainly annealing of low-alloy and high-alloy wood cylinders (e.g. alloyed gray cast iron) Usual operating weight 5000kg max. 8000kg The parts are placed directly crosswise on the bogie hearth/grate in the flow device. (Height above floor approx. 750mm without grate) Heating integrated in oven ceiling Circulation fan (3 compact fans) on oven side wall, 3 x 4.0 kW = 12.0 kW Forced cooling (1 cooling air fan) Program control via 25 programs with 50 program sections per program Oven door/lifting door with SWE gear motor approx. 2.2 kW (frequency-controlled) Bogie hearth drive approx. 3.0 kW SEW geared motor (frequency-controlled) incl. center rail (chain drag) used, good condition *

Year of construction: 2005, condition: ready for operation (used), Industrial drying oven / heating oven: Maximum operating temperature: 160°C, power: 20.6kW, double-door model, recirculating air / fresh air system, digital PID temperature controller, digital timer / process control, digital recording device / chart recorder (TE Direct), internal dimensions (W x H x D): approx. 1000mm x 1500mm x 800mm (approx. 1200l volume), external dimensions (W x H x D): approx. 1600mm x 2100mm x 1200mm, total weight: 580kg. Inspection possible by arrangement. Nwodpfx Agoylzg Ij Iec

Condition: excellent (used), Carbolite CWF 11/5 Chamber Furnace 1100 °C Max Temp: 1100 °C With exhaust system and table Upward opening door keeps hot surface away from user Soft self-closing door (for 5, 13, 21 & 23 liter models) Standard start delay and process timer function Njdpfspygpfjx Ag Ijwc Durable aluminum oxide support plates for the heating elements; sturdy door surround and base plate High quality fiber insulation with low thermal mass Powerful heating elements on both sides provide very good temperature homogeneity Easy access to elements and controls simplify maintenance and servicing Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek finish Nodpfxjd Spx Dj Ag Iewc Gas chamber furnace Type 003.05 With loading trolley Maximum temperature 200 ° C Approximate inside dimensions (B1900mm x T2950mm x H1800mm) Financing through our bank is also possible. komplett-konzept.leasingo.de More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1992, Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate inside dimensions (B1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) Year 1992 3 x 380 volts Njdpfx Aged Srlro Iowc 41 kW Financing through our bank is also possible. komplett-konzept.leasingo.de More articles - new and used - can be found in our shop! International shipping costs on request!