Used Laboratory Furnace for sale (2,099)

Condition: excellent (used), Here we offer a Despatch lab oven. Despatch Laboratory Ovens + 8 "WAFER LCC: Maximum temperature 260 ° C Lockable circuit breakers turn on the control panel for easy maintenance Protocol 3 control with large LCD display, built-in data logging capabilities and USB port for easy oven setup and data export Edelstellenne room with interior seams welded continuously on the insulation side to protect the working space from pollution Programmable door locking prevents the operator from opening the oven door while the cycle is running The door lock switch turns off the heating when the door is open The rolled air flow consists of 100% HEPA (High Efficiency Particulate Air) and is filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic Manometer monitors the pressure drop of the HEPA filter so you know when to replace the filter Electric door unlocking for ergonomic operation UL & C-UL Listed Control Panel Open Modbus communication connection (RS485) for remote monitoring and recording Chamber measure L 350 mm Chamber measure B 350 mm Chamber Measure H 350 mm Gbsdod Nfq Iepfx Ag Teg Maximum temperature 260°C Digital screen Yes Electric connection 230 V Total size L 830 mm Total dimensions B 910 mm Total Measure H 560 mm Type: LCC1-16NV-3 Condition: used/used Delivery: (See picture) (Changes and errors in technical D

Condition: good (used), Year of construction: 2015, Laboratory furnace for bending tests, 120 kW kiln, 900 °C chamber furnace 2 bending chambers Adjustable ceiling height Temperature range: max. approx. 900 °C Auxiliary heating Control cabinet PC, HP, Intel Core 2 Duo Voltage: 400 V Power: 120 kW Year of manufacture: 2015 Pre-chamber Width: 900 mm Height: 300 mm Gbodpfx Agexurpwo Tsg Depth: 580 mm Bending chamber Width: 520 mm Height: 115 mm Depth: 550 mm Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Laboratory Tube Furnace Naber R70/9 - Housing made of high quality structural steel. - The diameter of the tube is 70mm - The length of the tube is 1000mm - Tube made of sillimantine, works with two end caps 60 - damaged on one side. - Silent electronic relay Gbodpfjdy Huyex Ag Teg - Maximum temperature - 1200C - Temperature drop - 10 C / min - Programmable temperature curve

Condition: good (used), Cole Parmer vacuum furnace Cole Parmer vacuum furnaces are designed for drying under carefully controlled conditions - normal atmosphere, vacuum up to 30" Hg or inert gas atmosphere. The furnace enables drying, vacuum embedding, electroplating and processing of electronic components. Non-corrosive, non-flammable gases such as nitrogen and carbon dioxide can be used in the furnace. All controls and connections (except the power supply) are located on the front in a vertical panel. Manufacturer: Cole Parmer Model: 5053-12 Power: 600 W Voltage: 240 V Dimensions: 510 x 420 x 1200 mm Gbsdpfxewxxgaj Ag Teg You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, This listing is for the Smeg GW1160S Lab Glassware Washer The unit is in full working condition and is ready for immediate use Key Features & Capabilities Thermal Disinfection: Heats up to 95 °C to deliver bactericidal cleaning for lab-grade glassware Programmable Control: Microprocessor-based electronic control with 9 preset programs and ability to store 6 custom cycles RS232 Connectivity: Integrates with external printers or PCs for traceability and logging Gbodpfxjxhf Aqj Ag Tog Thermodynamic Drying: Equipped with active thermodynamic drying and a steam condenser (Ecoslim) featuring cold-water injection Construction & Design Internal Chamber: Made from AISI 316L stainless steel; robust, chemical-resistant, and easy to sanitize Exterior Finish: Panels constructed from AISI 304 stainless steel for durability and easy cleaning . Dual Wash Levels: Two independent rack levels on telescopic guides to accommodate varied glassware sizes Water & Chemical Handling Water Softener Built‑In: Includes a salt-sensing, auto-regenerating softener to prevent scale and enhance cleaning Dual Water Inlets: Compatible with both cold and demineralized water sources Detergent & Neutraliser Pumps: Comes standard with peristaltic pumps for alkaline powder detergent and acidic neutraliser; can optionally add more pumps Safety & Compliance Electronic Door Lock: Ensures the door remains securely locked during high-temp cycles Safety Thermostats & Alarms: Features multiple thermostats, interlocks, plus acoustic and visual alarms . Dimensions & Power External Footprint: Approximately 600 × 600 × 850 mm, suitable for standard 60 cm bench space Chamber Size: Internal dimensions ~ 525 × 490 × 570 mm (depth varies slightly by source) Power Supply: Standard: 3-phase 400 V, 50 Hz, max 7 kW .

Condition: used, functionality: fully functional, Instrumentation Laboratory ILab Aries Clinical Chemistry Analyzer. ILab Aries can perform photometry, turbidimetry and potentiometry test. The throughput is up to 280 photometric +160 ISE tests/hour to give a total of 440 tests/hour. 280 photometric tests/hour, up to 440 tests/hour with the ISE module. Bench top system. Integrated sample bar code reader with host query. Sample Rack allowing the use of primary tube without the need for adapters, and cups. Gsdpfx Agjupwawe Tobg 68 sample positions with the possibility of continuous loading. Automatic pre-dilution of samples as required. Automatic re-run of test as required. Integrated Reagent bar code reader. Real-time update of reagent level, reagent stability, calibration stability. Low reagent level alarm. 56 refrigerated positions on board. Integrated ISE module for the determination of Na, K, and Cl on serum, plasma and urine. Up to 3 reagents per test. Multi point calibration curves with up to 8 calibrators. Automatic generation of calibration curves from a master calibrant. Compact size: W 1100 mm, D 650 mm, and H 500 mm Weight: 45 Kg Good working condition. Please check out our other listings as well.

Condition: like new (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, As new! Used for only 15 production days. Hot Air Furnace — Capacity: 2,000,000 kca Gsdpfexq Rv Isx Ag Tsbg This unit is in excellent condition, practically as new, with only 15 days of operation. Ideal for industrial heating or drying applications. For more details or photos, please contact us.

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). Gbjdpfoq Nyzbjx Ag Tsg 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Max temperature: 700 C ° Gbsdpfx Aged Sm Die Tsg

Condition: used, functionality: fully functional, Instrumentation Laboratory GEM Premier 4000 Blood Gas Analyzer. The GEM Premier 4000 is comprehensive whole blood analyzer, offering a flexible analyte menu including pH, pO2, pCO2, electrolytes, metabolites and onboard CO-Oximetry. Yet it’s remarkably easy to use and maintenance-free, making the GEM Premier 4000 ideal for busy labs, use at the point-of-care and everywhere fast turnaround is mandatory. Easy to learn, simple to operate and complete, IL’s GEM Premier 4000 with iQM revolutionizes whole blood testing. Gbodpfjupvypjx Ag Tog 2 for sale. 1 piece/350 EUR. Good working condition. Please check out our other listings as well.

Condition: not inspected (used), functionality: unexamined, overall weight: 400 kg, inner dimension height: 230 mm, inner dimension length: 600 mm, inner dimension width: 300 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Internal dimensions: 600 x 300 x 230 mm Godpfxoxqnzbe Ag Tobg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 900 x 900 x 1,700 mm Weight: 400 kg

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21085 Description:Various laboratory equipment supplied by HECO for stone quality control.Sold together with the container.The equipment was recently in use and is functioning properly.A complete equipment list is attached as an image.Quick delivery possible. Godpow Nvgkjfx Ag Tobg Own weight: 3000 Model: Laboratorieutstyr til steinprøver

Year of construction: 2008, operating hours: 43,444 h, condition: good (used), functionality: fully functional, IPSEN Rotary Hearth Furnace – Complete Technical Data & Description Specifically, this is a gas-fired rotary hearth furnace for carburizing and hardening steel components. General Information Manufacturer: Ipsen System Type: Rotary Hearth Furnace Furnace Model / Designation: QDGs 300-75-2 × 3 × 15 Year of Manufacture: 2008 Availability: From Q1–Q2 / 2026 Condition: Previously in operation, annual VI inspections conducted Process / Application Heat Treatment Processes: - Carburizing - Re-austenitizing Operating Temperature: 840 – 930 °C Maximum Operating Temperature: 1000 °C Carburized Case Depth: 0.1 – 0.25 mm at 610 HV Workpiece Data Maximum Workpiece Weight: 4.7 kg Maximum Workpiece Diameter: 260 mm Furnace Structure / Capacity Ceramic tier construction Number of Tiers: 3 Positions per Tier: 15 Workpieces per Position: 2 ➡ Total Capacity: 3 × 15 × 2 = 90 workpieces per cycle Media & Connection Data Electrical Connection Data Rated Voltage: 400 V / 3/N/PE / 50 Hz Fuse Protection: 48 A Installed Power: 33 kVA Motor Drives – Consumption: 11.8 kW Heating – Natural Gas Calorific Value: Hu = 10 kWh/Nm³ Gas Pressure: 100 mbar Radiant Tubes: 4 units Connection Value: 19 m³/h Reference Consumption: Start-up Phase: 282 kWh Idle (Furnace closed): approx. 8.4 m³/h Burners Gas Type: Natural Gas Connection Value: 0.64 m³/h Consumption: approx. 0.32 m³/h Flame Curtain (Infeed) Gas Type: Natural Gas Connection Value: 2.2 m³/h Consumption (cycle time approx. 2 min): 0.64 m³/h Carrier Gas Gas Type: Endogas Gas Pressure: 50–100 mbar Connection Value: 27.5 m³/h Continuous Consumption: approx. 21.0 m³/h Enrichment Gases Propane Connection Value: 1.37 m³/h Continuous Consumption: approx. 0.74 m³/h Ammonia Connection Value: 1.58 m³/h Continuous Consumption: 0.32 m³/h Gjdpsx Th Aaofx Ag Tsbg Safety Gas Gas Type: Nitrogen Gas Pressure: 100–200 mbar Connection Value (3 h purge duration): 11.6 m³/h Purge Quantity per Purge: 35 m³ Cooling Water (Furnace + Door Seal) Connection Value: 2.0 m³/h Consumption: approx. 1.8 m³/h Supply Temperature: 25 °C Return Temperature: 45 °C Supply Pressure: 2–3 bar Return: non-pressurized Compressed Air Connection Value: 12 m³/h Operating Pressure: 5 bar Summary (short & marketing-compatible) Classic Ipsen rotary hearth furnace for carburizing 90 parts per cycle Up to 1000 °C Fully equipped with gas and media technology Industry-proven system, year of manufacture 2008 Ideal for gears, shafts, and rotationally symmetric components

Condition: used, Manufacturer : IKA Model : T 65 D Year : - Type: Agitator / Disperser / Homogenizer Capacity (water): 2 - 50 l Max. viscosity 5000 mPas Gbodpfx Agex R D E Eo Tog Speed range 1000 - 9500 rpm Motor power: 2.2 KW Digital version Support / Telescopic stand: T 653

Condition: good (used), Laboratory power supply, power supply unit, voltage generator, laboratory power supply device Godpfxeb S Htmo Ag Tobg -Input: 230 Volt AC -Output: 24 V 2.5 A -Dimensions: 160/270/H110 mm -Weight: 5.5 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: seco, Used Heat Treatment Furnace for Aluminium Alloys Make: SECO WARWICK Model: SDBF-24.16.30/600E Year of manufacture: 2014 EXPERIENCE SECO/WARWICK is a global leader in the development, design, and manufacture of furnaces and systems for the heat treatment of aluminium alloys. SECO/WARWICK has delivered numerous solution heat treatment, aging, and annealing furnaces for processing aluminium alloys from both wrought and cast materials. All technical solutions presented in this offer are proven and have already been successfully implemented by SECO/WARWICK in furnaces for a wide range of applications within the aluminium industry. A significant number of these furnaces have been supplied to the aerospace industry and meet their particularly stringent requirements as well as all relevant standards and regulations. Gbodpfx Aex Tbf Usg Tjg CAPACITY The data provided by the customer forms the basis for the system design and also serves as the foundation for the guaranteed performance of the line. The system is designed for the heat treatment of aluminium pistons and cylinder heads.

Year of construction: 2000, condition: good (used), Temptec annealing furnace: Gedpfx Asx Tcmysg Tebg Max workpiece size: approx. 1200 × 1200 × 1200 mm Loaded for transport.

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC Gsdpjd Sg Hrsfx Ag Tebg control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Condition: excellent (used), Year of construction: 2012, From previous federal ownership, we offer you this meticulously maintained Miele laboratory dishwasher, model G7883 CD, as a complete system including three racks, directly from first ownership. The entire system was purchased in 2012, has been continuously serviced until 2025, and is in impeccable optical and technical condition with no significant damage—see photos. Minor scratches on the housing and slight discolorations may be present due to normal use, but these do not affect the functionality of the system in any way. The machine was used exclusively for scientific purposes and has never seen commercial or industrial operation. It is an under-counter version, which means it does not have a cover and has a reduced installation height of 820 mm instead of 850 mm. Included in the scope of delivery are the three racks as shown in the photos. Gbsdex S Hv Njpfx Ag Tsg Technical specifications and features: - Capacity for up to 37 narrow-necked bottles, 96 pipettes, or 1,600 test tubes - Automatic Multitronic Novo Plus control system with 10 standard programs and freely selectable parameters - 2 integrated dosing pumps for cleaning agents - HEPA filter H13 plus pre-filter - Circulating pump with a maximum of 400 liters/min - Dimensions (W x D x H): 900 x 720 x 850 mm (820 mm for the version without cover) - Weight: approx. 101 kg The device can be collected from us during normal business hours. The total shipping weight including pallet and accessories is approx. 140 kg! Shipping by freight forwarding is also possible for an additional charge. Sale is strictly to commercial customers. You will naturally receive an invoice with VAT shown. Private buyers may purchase the device on a commission basis; direct commercial sales to private individuals are expressly excluded! The item is sold under exclusion of any warranty or liability for material defects. This exclusion does not apply to damage claims resulting from grossly negligent or intentional breach of duty by the seller, nor for injury to life, limb, or health. For any further questions regarding pricing or technical details, please feel free to contact us at the address provided.

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosol System Application This padder-dryer combination has proven itself extremely effective in practice. It is used in this form for a wide variety of hot air treatment processes, such as drying, setting, condensing, thermosolizing, etc. This system is used wherever a certain sample size is required, for example, to produce sample collections or similar. THA Dryer If the padder and dryer are to be used separately in addition to continuous operation, the THA dryer should be selected. This unit is equipped with an unwinder at the dryer inlet and an extractor at its outlet. This element determines the fabric speed when operated separately. This offers the advantage of using the padder and dryer independently and simultaneously. The fabric is then transferred to the dryer for drying, setting, condensing, etc. If all of the above-mentioned applications are to be ensured and if the use of pin frames is also desired for stand-alone operation of the dryer, the THN model is preferable. The standard pin frames are suitable for a sample size of max. 50 x 50 cm (larger pin frames available upon request). Lengthwise adjustable frames for woven fabrics or lengthwise and widthwise adjustable material holders for warp-knitted and knitted fabrics, nonwovens, etc., as well as clamp frames for foils and paper, are available. Godpfxou D Arij Ag Tebg Drying Chamber The drying chamber, including the electrical equipment box and control panel, are mounted on a base frame and bolted together to form a single unit. Good thermal insulation of the dryer is ensured by its double-walled construction with insulation between them. The nozzle array, with a length of 1300 mm, is divided into an upper and lower nozzle compartment. A control flap allows for equal ventilation from top and bottom, or more air from top or bottom. Fan and Heater Intense air circulation is ensured by a powerful fan with a capacity of approximately 900-3500 m³/h, combined with a well-tuned heating output, resulting in optimal evaporation performance. A dual-protection monitoring system reduces maintenance and increases the operational reliability of the dryer. The heating capacity is designed for rapid heating and is automatically reduced once the desired temperature is reached to avoid unnecessary power surges. The temperature is controlled by an electronic measuring and control device in the range of 20-250°C. The fresh air is drawn directly into the recirculation fan via a fan. The desired flow rate can be adjusted using a step switch. Technical Specifications Air velocity approx. 4-12 m/sec Air flow approx. 900-3500 m3/h Temperature range up to 250°C Heating output approx. 27 kW Nozzle area 1300 mm Fabric tension continuously adjustable Fresh air supply adjustable to multiple levels Dimensions: LxWxH = 4800 x 1380 x 1750 mm Purchase price: €86,275 Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: used, GRIESER Type: VPL 3.0 Total volume of mixing chamber 3.0 liters Usable volume 0.3 to 2.0 liters Pressure in mixing chamber 0 to 1.2 abs. Pressure in stainless steel double jacket: N/A Critical speed 1800 rpm Speed range under load Blade mixing tool 38-282 rpm Scraper 9-90 rpm Gbsdpfjv E I N Eex Ag Tog Rated voltage: 3/PE/50Hz, 400V L/PE/N/50Hz, 230V Control voltage: 24V DC Power: 1.3KW Rated current: 5.0A Main switch: 32A Fuse: 16A Weight: 250 kg Sold ex location! Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), functionality: fully functional, Used annealing furnace Gbsdpfxex Tbgro Ag Tjg Manufacturer: Rhode Type: protective gas furnace KL 70/65/135 Year of manufacture: 1992

Condition: used, This listing is for a Thermo Fisher Scientific A500PV Laboratory Refrigerator The unit is in full working condition and is ready for immediate release Gedpfxsxv Dn Ij Ag Tsbg

Condition: used, This listing is for a Labcold Blood Bank RDBB11601 Laboratory Refrigerator. The unit is in full working condition and is ready for immediate release. . Gbjdsxx Awtopfx Ag Tsg

Condition: used, This listing is for 1 of 3 Sartorius Practum 513-1S Laboratory Balances The unit is in full working condition and is ready for immediate release. The Practum series is described by Sartorius as offering “best value for your money, without compromises in precision and reliability.” The model 513‑1S is one of the higher‑capacity versions of the Practum range: a capacity of 510 g, with a readability (resolution) of 0.001 g (i.e., ±1 mg) for that capacity. It uses the typical features of the Practum line: rugged housing (aluminium die‑cast base and ABS housing) and technology built for standard applications. Gedpfx Agjxrt Nts Tsbg Connectivity: has a Mini‑USB interface for outputting data to a PC or compatible printer. Weigh‑below hook capability (for e.g., hanging weights beneath the balance) is supported. A front level bubble and adjustable feet support easy leveling, which improves accuracy and repeatability. Mechanical overload protection is built in to help ensure durability. The Practum 513‑1S is well‑suited for standard analytical/precision weighing tasks in laboratories where you need to weigh up to ~ 510 g with 1 mg resolution. Typical use‑cases: formulation work, general sample weighing, quality control, density determination, routine laboratory tasks. The documentation mentions modes like counting, percent weighing, averaging and “unstable conditions” for the broader series. Because of its resolution and capacity, it's a good fit when you don’t need ultra‑fine microgram resolution but need relatively high capacity with milligram resolution.