Used Crucible Furnaces for sale (705)

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN101660321, 12-month warranty, in stock -Electrically resistance-heated tilting crucible furnace system for melting aluminum -Max. furnace temperature: 1200 °C -Max. melt bath temperature: 1050 °C Rbsdoylkz Uopfx Ab Uew -Melting capacity: 320 kg Al/h -Controller H 100 (5 programs with 4 steps each) -Includes 2-channel preset timer and 6100A recorder for thermocouple data logging for customer-side connection -No exhaust system required -Integrated safety system: In case of thermocouple failure, the furnace continues operation at reduced power to prevent the melt from solidifying -Temperature limiter for the chamber as overtemperature protection. The limiter disconnects the heating system once the set limit temperature is reached and only reactivates it after the temperature has dropped below the threshold. -Power rating: 140 kW (increased!) -Mains connection: 400V 3/N/PE, 50 Hz -Energy consumption (lid closed/open) approx. 8/17 kW -Weight approx. 3000 kg -External dimensions (L x W x H): approx. 2010 x 2000 x 1460 mm -Documentation, CE declaration Inspection in our warehouse by appointment! Furnace, industrial furnace, melting furnace, tilting crucible furnace, crucible furnace, aluminum melting furnace

Year of construction: 2002, condition: good (used), functionality: fully functional, Temperature max: 700° Celcius Rbjdpjwi Ry Hjfx Ab Uew Opening LxH: 1.500 x 30 mm Country of origin: The Netherlands Electric power: 14 kW Machine LxWxH: 2.000 x 1.000 x 1.700 mm Machine weight: 1500 kg

Year of construction: 2024, condition: ready for operation (used), The heat exchangers are part of the system but were commissioned separately. The new price of the system was therefore over EUR 2 million. The official commissioning took place in April 2024; however, this only involved trial runs and not series production. Technical Data – Modular Chamber Furnace System for Homogenizing Aluminum Billets (Used Equipment) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks System Construction The system essentially consists of: • 1 preheating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic • 12 charging racks (BSN 1614) • Control system with PLC (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). Rbsdpoyt Ihbjfx Ab Uew Further information can be found in the attached PDF.

Condition: good (used), Internal item no.: 25121 Rjdpfeyxpdcex Ab Usbw Hardening furnace Nolzen WL 20 / 19 / 40 Max. temperature: 1150°C Power: 8KW Connection: 380V Internal chamber dimensions: W 20 / H 19 / D 40 cm Dimensions (LxWxH): 60 x 76 x 84 cm Weight: approx. 200 kg

Year of construction: 1997, condition: like new (used), Maximum temperature: 1290 °C Interior dimensions: 630 x 530 x 760 mm Redpfx Abst Ebpus Ujbw Electrical connection: 400 V kW Space required: 1200 x 870 x 1810 mm Weight: 470 kg Heating output: 16.5 kW

Year of construction: 2016, condition: good (used), Maximum temperature: 650°C Internal dimensions: Width 650 mm Depth 750 mm Height 600 mm Electrical connection: 380 V, 20.7 kW Weight: 390 kg Space requirement: 1600 x 1200 x 1800 mm Redpfx Asxb A E Aeb Usbw

Year of construction: 2019, operating hours: 10 h, condition: like new (used), functionality: fully functional, temperature: 1,300 °C, Nabertherm LH 60/13 laboratory furnace – as new condition - 1300°C - incl. Protective Gas Box + Charging Cart WS 1 Nabertherm LH 60/13 Chamber Furnace – 1300°C – Year 2019 – As New – incl. Protective Gas Box + Charging Cart WS 1 For sale: Nabertherm LH 60/13 high-quality electric chamber furnace in as new condition, including a protective gas box and Nabertherm Charging Cart WS 1. The furnace was validated and tested, but was never put into operational service. It has therefore remained in exceptionally clean condition, as clearly shown in the photos. Redpoyxy Dmefx Ab Ujbw This setup is particularly suitable for applications requiring a controlled atmosphere / protective gas process. Furnace specifications Brand / model: Nabertherm LH 60/13 Year of manufacture: 2019 Maximum temperature: 1300°C Chamber volume: 60 liters Internal chamber dimensions: 400 x 400 x 400 mm Connected load: 11.0 kW Electrical supply: 400 V / 3-phase / N / PE Frequency: 50 Hz Current: 15.9 / 15.9 / 15.9 A Serial number: 371385 Included in the sale Nabertherm LH 60/13 chamber furnace mobile base / frame control unit visible gas connection setup protective gas box Nabertherm Charging Cart WS 1 Charging Cart WS 1 The included Nabertherm Charging Cart WS 1 is designed for the handling and charging of protective gas and annealing boxes. According to Nabertherm, it features a parallel guided lifting mechanism and is suitable for furnace models including LH 60. This makes the complete setup especially suitable for specialized thermal processes where oxidation must be minimized or where a controlled atmosphere is required. Condition validated and tested never in operational service as new condition.

Condition: used, Used casting furnace 640 mm x 1150 mm Rbsdpfxeyxndus Ab Uew

Condition: used, Used casting furnace 640 mm x 1150 mm Rbedpjyxnc Rofx Ab Ujw

Year of construction: 2017, condition: used, machine/vehicle number: E001393/94, Capacity: 190 l/min Rbsdpfeyxm A Ajx Ab Uew

Condition: new, Year of construction: 2026, Recirculating Air Chamber Furnace, electric, new unit, delivery time 12 weeks - Temperature: 300°C - Internal dimensions (W x D x H): 1500 x 3000 x 2000 mm - External dimensions (W x D x H): 2410 x 3560 x 2730 mm - Capacity: 9,000 liters - Control: Eurotherm Nanodac, 100 programs, each with 25 segments; an additional 100 programs can be saved/loaded via FTP or USB memory stick - 2 recirculation fans - Double doors with safety door sensors - Overtemperature protection: Eurotherm 3216i - Control/Recorder with color touch display - Sturdy steel construction, exterior in anthracite - Motorized dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Recessed entry for loading trolleys - Documentation, CE Declaration of Conformity - Electrical wiring diagram with spare parts list Transport, installation, and staff training are available upon request. As a new unit, this furnace is also available with exhaust fan and alternative equipment! Delivery time approx. 10–12 weeks—please contact us for details! We offer new and used industrial furnaces, which we can also modify or upgrade to customer specifications. Redpfx Aslkb Ezob Uebw Inspection at our facility is possible at any time by appointment. Furnace, ovens, drying oven, industrial oven, drying cabinet, heating oven, heating cabinet, recirculation oven, chamber oven, heating chamber, recirculation chamber oven, tempering oven, annealing oven

Condition: like new (used), temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 process control controller: yes weight: 700 kg voltage: 400 V 3/N current consumption: 63 A PLC: Siemens S7 control cabinet: brand new - With an air heater under the furnace, pre-heated air with a temperature Rbsdpfxeyxnk Us Ab Uow of up to 400°C can be flushed into the furnace chamber during the debinding phase. - Controllable cooling housing with autom. valve - Automatic exhaust damper - Automatic exhaust flap - Monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor.

Condition: used, Gas heated double chamber furnace type: KA_GB 10.14.14/d heating: natural gas Rbjdpfxodyvipj Ab Uow usable dimensions per chamber width: 1.000 mm height: 1.400 mm depth: 1.400 mm max. temperature: 550°C working temperature: 250 – 550°C uniformity: ±5 K total connected load: 15 kVA hot gas circulator power: 2 x 5,5 kW (1470 min-1) combustion air blower power: 1 x 1.5 kW (5520 rpm at 95 Hz) burner output: 2 x 100 kW (expandable to max. 2 x 150 kW) number of control groups: 2

Condition: good (used), debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C Redpfxemfn Rue Ab Usbw internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 weight: 700 kg voltage: 400 V 3/N current consumption: 63 A PLC: Siemens S7 control cabinet: brand new - with an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - controllable cooling housing with autom. ball valve - automatic exhaust damper - automatic exhaust flap - monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor. -The furnaces themselves, particularly the brickwork, heating elements, and insulation, are in excellent condition with low or no working hours, making them practically like new.

Condition: used, Electrically heated tempering furnace with protective atmosphere Type: TSK-8-10-12-80 Redpfsxcphmsx Ab Usbw Temperature: max. 950°C Internal dimensions (W x H X D):800 x 1050 x 1200 mm Heating power: 80 kW Atmosphere fan: 4,0 kW

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Horizontal glass convection tempering furnace . Rsdpoyw Hgrjfx Ab Usbw For max. glass sizes : 1500 x 3000 mm Glass thikness : 4 - 19 mm Voltage : 400 V 50 Hz Control voltage : 230 V V AC 24 Power : Heating : 296 Kw Motors : 262 Kw Total : 558 Kw Current : Heating : 470 A Motors : 450 A Total : 920 A

Condition: as good as new (ex-display), vacuum drying oven Inside: 700 x 700 x 600mm deep Heating capacity: 3 KW Rodpfxjfbl T Ns Ab Uobw Temperature range 1-120°C Outer dimensions: 1280 x 950 x 1280 Pressure range: Atmosphere - 0 Bar (Not suitable for overpressure) A suitable vacuum pump is provided depending on the application. Supply line: 3ph , N, PE 400V, 50Hz CEE plug The interior installation can of course be completely removed!

Year of construction: 2009, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SN FX036084, 12 months warranty, in stock Resistance-heated unit with gas-tight furnace muffle - Continuous operation Tmax 800°C - Max temperature approx. 900°C (under protective gas) - SE-402 program controller - 3-zone heating - Gas supply system: Rsdpeyxlwrofx Ab Uebw 2 different protective gases, as well as fuel gases - Gas circulation - Vacuum system - Internal muffle dimensions (W x D x H): 580 x 830 x 1500 mm (special length) - Muffle capacity approx. 722 liters - Max. charge weight approx. 1000 kg - Two-stage rapid cooling with frequency converter - Flare system with flame monitoring - Sight glass DN150 - Max. operating gas pressure 7 mbar - Mains voltage 400V, 3-phase, N, PE - Heating power 70 kVA - Rated current 3x97A - Weight 1900 kg - External furnace dimensions (W x H x D): 1700 x 1950 x 2750 mm - Control cabinet (W x D x H): 510 x 1360 x 500 mm - Operating manual, circuit diagrams, CE declaration The furnace is offered fully overhauled (all switching electrical components such as contactors etc. replaced with new parts), new sealing, electrical inspection including test logs. Inspection at our warehouse by appointment! Furnace, ovens, industrial furnace, melting furnace, tilting crucible furnace, crucible furnace, aluminum melting furnace

Year of construction: 1985, condition: used, Hardening furnace Heraeus Type KM 260 Rsdpfjgtxuqsx Ab Uebw width 250 mm height 150 mm depth 500 mm Temperature up to 1150 c

Condition: used, Year of construction: 2018, PUJOL LAM PRO – Year 2018 Lamination Furnace Rbodoyvgvkspfx Ab Uew Internal dimensions 2800 x 4000 mm Power 40 kW

Year of construction: 1995, condition: ready for operation (used), Product: Electrosinter Year of production: 1995 Air transport: 2x9000m3 Airspace / Capacity: 32m3 Oven opening: 1200 x 1200mm // 80 x 1500mm Heat load: 55-160kW G20 natural gas Air temperature: 170-220 ° C Enclosure size: 2600 x 10300 x 3600mm Rbjdeg R Sh Aopfx Ab Uow Electrical cabinets included. It requires electronic and mechanical renovation. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Pusher Gas Carburizing Furnace (Double Line), Rjdpfxjyabxys Ab Ujbw Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Condition: not inspected (used), Padeltherm shaft furnace Rodpfxoywt I Ne Ab Uobw Must be dismantled and collected by the buyer.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: seco, Used Heat Treatment Furnace for Aluminium Alloys Make: SECO WARWICK Model: SDBF-24.16.30/600E Year of manufacture: 2014 EXPERIENCE SECO/WARWICK is a global leader in the development, design, and manufacture of furnaces and systems for the heat treatment of aluminium alloys. SECO/WARWICK has delivered numerous solution heat treatment, aging, and annealing furnaces for processing aluminium alloys from both wrought and cast materials. All technical solutions presented in this offer are proven and have already been successfully implemented by SECO/WARWICK in furnaces for a wide range of applications within the aluminium industry. A significant number of these furnaces have been supplied to the aerospace industry and meet their particularly stringent requirements as well as all relevant standards and regulations. Rsdpfx Ajx Tbf Uob Uobw CAPACITY The data provided by the customer forms the basis for the system design and also serves as the foundation for the guaranteed performance of the line. The system is designed for the heat treatment of aluminium pistons and cylinder heads.

Condition: excellent (used), Despatch LCC2-14NV-3 Year of manufacture: approx. 2018 Max. temperature: 260 °C / 500 °F Power: 415V - 1PH - 50 Hz Full Load Amps: 25.2 AMPS S.C.C.R: 5 kA Heater: 16 kW / 22.3 AMPS Largest Motor Amps: 2.1 AMPS Total Motor Amps: 3.2 AMPS Rodpjyvlaujfx Ab Usbw