Used Sintering Furnace for sale (793)

Condition: as good as new (ex-display), Year of construction: 2023, type of input current: AC, El. heated roller sintering furnace, make Riedhammer type: TR 18/4x33/10-E 90 condition: as new length of debinding zone: 6.12 m length of heating/holding zone: 6.12 m length of the cooling zone: 6.12 m total length of oven without conveyors: approx. 18.4 m total length of oven with conveyors: 20.4 m total width of oven: 3.5 m total height of oven: approx. 2.5 m clear oven width: 1,540 mm usable width: 4x 330 mm Gtjdpfx Aasp T Th Hjbjt usable height from top edge of roll: 100 mm roller spacing: approx. 85 mm roll diameter: approx. 50 mm number of oven conveyor drives (controlled): 3 pieces number of rule groups: 34 connected load of oven: approx. 476 kW maximum temperature on the thermocouple: 900 °C max. temperature: 930°C power type: 400/230V, 50Hz cooling water consumption: approx. 50 m³/h

Year of construction: 2020, condition: like new (used), functionality: fully functional, Fully automatic sintering continuous furnace system Manufacturer: Sarnes Model: 600-G/CQI-9 Year of manufacture: 2020 (commissioned 2021) Programmable, with online diagnostic system. Fuel: natural gas Hydrogen + nitrogen (N2+H2) operation integrated The system has seen very little use and is in excellent condition. Offer / Quotation Date: 18.1.19 620 mm belt width, gas heated, N2/H2 operation, LED dewaxing zone, rapid cooling section (Pos 2), flameless discharge and ceramic muffle, Heating: low NOx RS Rekudrall burners, SiSiC burner tubes, installed heating capacity 320 kW in 8 zones, dual thermocouples, 100 mm usable height. LED 3 dewaxing zones ("low energy dewaxing" – utilization of chemically bound energy of the waxes and improved burnout conditions especially for heavy PM parts (>0.9 kg)). Dimensions: - Infeed table 2 m (target-actual belt speed compensation) - LED3 dewaxing zone: 1.5 m Gedpfx Aoxfcdyoabstt - Sintering zone length 7.5 m - Rapid cooling length 1 m - Convective cooling zone length 2 x 4 m - Flameless discharge with air shower 2 m - Outfeed table 2.7 m - Total system length 23.7 m - Width 2.3 m Connection ratings: Heating: installed power 320 kW Natural gas: 25 m³/h (80 mbar) N2: 45-65 m³/h (max. 80 mbar) H2: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temp.

Year of construction: 2023, condition: new, El. heated two-track plate pusher furnace, make Riedhammer type: TP12,75/2x20/15-E-145 condition: as new total length of oven: 15.5 m furnace width: 3.6 m voltage type: 400/230V, 50 Hz connected load: 17 kVA Gtedpfx Ajp T T Hneabet tolerated voltage fluctuation: 10% tolerated frequency fluctuation: 1% PLC: SIEMENS/Comfort Panel TP1500-15 product structure (L x W x H) including push plate: 200 x 200x 101 mm Tmax debinding zone (4 segments): 650 °C Tmax pressure compensation zone (1 segment): 750 °C Tmax main combustion zone (6 segments): 1450 °C Tmax cooling module 1: 600 °C Tmax cooling module 2: 300 °C min. push time: 8 min max push time: 30 min number of conveyor plates: 266 pieces channel height: 105 mm

Condition: good (used), debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 weight: 700 kg voltage: 400 V 3/N Gtodpfx Aajmfn Ruebjt current consumption: 63 A - with an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - controllable cooling housing with autom. ball valve - automatic exhaust damper - automatic exhaust flap - monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor. -The furnaces themselves, particularly the brickwork, heating elements, and insulation, are in excellent condition with low or no working hours, making them practically like new. -To operate these furnaces, it will be necessary to implement at least one temperature controller per furnace, a PLC, or a similar control system.

Condition: like new (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, As new! Used for only 15 production days. Hot Air Furnace — Capacity: 2,000,000 kca Gtedpfx Aaoxq Rv Isbet This unit is in excellent condition, practically as new, with only 15 days of operation. Ideal for industrial heating or drying applications. For more details or photos, please contact us.

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Max temperature: 700 C ° Gtjdpfjd Sm Disx Aabst

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. Gedpfxsq Nyzbs Aabstt 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Year of construction: 1990, condition: used, degree max 1800 Godpergbyvefx Aabjtt total power requirement 5 kW

Year of construction: 2021, condition: used, Carbolite GERO Carbolite GERO Muffle Furnace ELF 11/6B – 1100 °C – Year of manufacture: 2021 Product description For sale is a Carbolite GERO muffle furnace, type ELF 11/6B, equipped with a 301 temperature controller. The unit is in good used condition and originates from professional use. The furnace has been functionally tested and reaches the set temperature (see display on photos). Ideally suited for laboratories, industry, training, material testing, ceramics, metallurgy, or research. Technical data Manufacturer: Carbolite GERO Ltd. Model: ELF 11/6B Year of manufacture: 2021 Max. temperature: 1100 °C Usable volume: approx. 6 liters Heating power: 2000 W Power supply: 230 V / 50–60 Hz Phases: 1 + N Rated current: approx. 9.7 A Temperature controller: Model 301 Country of origin: United Kingdom Certification: CE / UKCA Weight & dimensions External dimensions (W × D × H): approx. 420 × 530 × 615 mm Weight: approx. 40 kg Important note: Godpfxjx T A U Rs Aabott “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: used, max. temperature 3000 Grad Gtodox Urupspfx Aabet

Year of construction: 1969, condition: used, Technical data: Power: 2.2 kW Connection: 220 V Dimensions: Gedpsu Atiijfx Aabstt Frame (WxDxH), approx.: 310 cx 355 x 755 mm Oven (WxDxH), approx.: 370 x 550 x 400 mm Oven interior (WxDxH), approx.: 180 x 23.5 x 120 mm Equipment: - Various tongs

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: seco, Used Heat Treatment Furnace for Aluminium Alloys Make: SECO WARWICK Model: SDBF-24.16.30/600E Year of manufacture: 2014 Gtsdpfxsx Tbf Us Aabjt EXPERIENCE SECO/WARWICK is a global leader in the development, design, and manufacture of furnaces and systems for the heat treatment of aluminium alloys. SECO/WARWICK has delivered numerous solution heat treatment, aging, and annealing furnaces for processing aluminium alloys from both wrought and cast materials. All technical solutions presented in this offer are proven and have already been successfully implemented by SECO/WARWICK in furnaces for a wide range of applications within the aluminium industry. A significant number of these furnaces have been supplied to the aerospace industry and meet their particularly stringent requirements as well as all relevant standards and regulations. CAPACITY The data provided by the customer forms the basis for the system design and also serves as the foundation for the guaranteed performance of the line. The system is designed for the heat treatment of aluminium pistons and cylinder heads.

Year of construction: 2012, condition: used, Technical details: Gtodpfx Aasu R Dhxsbet max. temperature: 700° - übliche Temperatur: 400 - 650°C Grad size of opening: B: ca. 2200 x T: ca. 3800 x H: ca.1100 mm program control: Siemens S7/300 IM 151-7 interface: Ethernet container volume: Ofen-Volumen: 9,2 m³ l control voltage: 24 / 230 Volt current type: 1P/PEN; 50 Hz Voltage: 400 V elect. connected power requirement of heater: 3 x 3 x 21 kW = 189 kW flow rate: 3 x ca. 9.000 = 27.000 m³/h weight of the machine ca.: 8,0 t dimensions of the machine approx. HxWxD: ca. 3.9 x 3.8x 4.8 m dimensions electric cabinet: ca. B: 2.400 x T: 400 x H: 2.000 mm transport dimensions LxWxH: ca. 5,2 x 3,6 x 2,9 m Electrically heated circulation oven Electric annealing furnace whose housing is made of profiled sheet steel and lined with lightweight refractory bricks/ firebricks. Application/processes: mainly annealing of low-alloy and high-alloy wood cylinders (e.g. alloyed gray cast iron) Usual operating weight 5000kg max. 8000kg The parts are placed directly crosswise on the bogie hearth/grate in the flow device. (Height above floor approx. 750mm without grate) Heating integrated in oven ceiling Circulation fan (3 compact fans) on oven side wall, 3 x 4.0 kW = 12.0 kW Forced cooling (1 cooling air fan) Program control via 25 programs with 50 program sections per program Oven door/lifting door with SWE gear motor approx. 2.2 kW (frequency-controlled) Bogie hearth drive approx. 3.0 kW SEW geared motor (frequency-controlled) incl. center rail (chain drag) used, good condition *

Year of construction: 1994, condition: used, max. temperature 1100 Grad voltage 230 V Gedpfx Ajthr Ncjabett output 3 kw range - high tensile Innen 295x230x125 mm

Year of construction: 2000, condition: good (used), Temptec annealing furnace: Max workpiece size: approx. 1200 × 1200 × 1200 mm Loaded for transport. Gsdpox Tcmysfx Aabjtt

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 Godpfx Aefz I Rxeabstt ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Nabertherm Nabertherm N 2260/S Chamber Furnace with Wire Heating up to 1300 °C Technical Specifications – Nabertherm N 2260/S Feature / Value Model: Nabertherm N 2260/S Maximum temperature: 1300 °C Voltage / connection: 400 V, 3~ (three-phase current), PE (protective earth) Heating power: 75 kW Heating zones: 5-sided (sides, bottom, door, optionally ceiling) Internal dimensions (firing chamber) Dimension / Value Width (w): 1,500 mm Depth (d): 1,000 mm Height (h): 1,720 mm Floor load: 10 kg/dm² Volume: approx. 2,580 litres External dimensions (overall unit) Dimension / Value Length (L): 2,000 mm Width (W): 2,250 mm Height (H): 2,850 mm Weight: approx. 3,100 kg Condition: used Gtodpfx Aew Ec Egjabst Scope of delivery: (see picture) (Technical data and specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), functionality: fully functional, Used annealing furnace Manufacturer: Rhode Gjdpfxsx Tbgrj Aabstt Type: protective gas furnace KL 70/65/135 Year of manufacture: 1992

Condition: used, Year of construction: 2001, MAPPI AU 1F 1S 900 1800 O.4 R.S.A. – Year 2001 Gtsdpsx N Sp Asfx Aabet Tempering furnace Maximum glass dimensions: 900 x 2000 mm Thickness: 4-19 mm

Condition: good (used), Wachtel Infra baking oven – used – model EE 508/76 – year of manufacture approx. 2002 – 5 chambers 1.8 x 0.8 m – steam injection in all chambers – electronic control – hood with fan – power approx. 40 kW – capacity for 30 trays 40 x 60 cm – oven from production / overhaul upon customer request – collection from warehouse / shipping option available – price on request Gtedpex R Sx Hefx Aabot

Year of construction: 2012, condition: used, Flat glass tempering furnace Glaston (Tamglass), model FC500 Condition – working, as it is. Gtedpfx Aei Hgploabjt Size – 2800x6000mm Roller pitch – 120 mm Glass thickness – 4…19mm Working power – 1600 kW Installed power – 2170 kW Year – 2012 The furnace is in perfect condition. It is suite for clear glass tempering, printing glass and low-e glass.

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 Gtodjfx Nfmjpfx Aabot ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: as good as new (ex-display), Year of construction: 2025, Exhibition machine (new), available immediately - Internal dimensions (WxDxH): 1250 x 4000 x 1450 mm - External dimensions (WxDxH): 1900 x 4900 x 2500 mm - Power consumption: 240 kW - Current consumption: 350 amperes - Maximum temperature Tmax: 1300°C - Furnace weight approx.: 6000 kg - Control system: JUMO IMAGO 500 with software packages (OPCA & PCC) - Chart recorder: JUMO Logoscreen 601 - Includes feedthrough and 6 additional sockets for recording customer type K thermocouples - Multizone design (3 zones) - Control panel with solid-state relays - Control panel air conditioning - Automatic supply and exhaust air dampers - Automatic exhaust air dampers, regulated as follows: small cooling (2 dampers open), large cooling (all 6 dampers open) Gtodpfxep H Tb To Aabot - Regulated cooling system (including frequency converter, controlled by the control system) with supply air fan - Electrically driven bogie hearth on rails - Max loading capacity 3.5 tons, reinforcement available on request! Metal loading surface for bogie hearth on request! - Swing door - Documentation and CE declaration Reinforcement of the bogie hearth available on request! See image 4 (conversion example)! We are happy to offer installation, commissioning, and staff training. Please contact us! We supply new and used industrial furnaces. Viewing available in our warehouse upon request! Keywords: bogie hearth furnace, bogie furnace, ovens, annealing furnace, firing kiln, hardening furnace, heat treatment furnace, oven, tempering furnace, curing oven, drying oven, industrial furnace

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 Gsdpfxjfzccne Aabott 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ Godofzb Rcspfx Aabott 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡