Used Vacuum Sintering Furnace for sale (4,305)

Year of construction: 1990, condition: used, The machine underwent a complete overhaul by the original manufacturer in 2016. Since then, it has seen very limited use and has been stored and disconnected for several years now. Rbedpfx Aeyaczpjbmjt

Condition: excellent (used), Year of construction: 2001, Vacuum tempering furnace Manufacturer: BMI Rbsdpovcyf Tjfx Abmjt year of construction 2001 Maximum temperature: 750°C Year of construction: 2001 Batch size: L X W X 1200 X 600 X 600mm Heating: Electric Heating capacity 100 KW

Condition: defective spare-parts repository (used), Stainless steel housing for a vacuum furnace with a heating chamber made of molybdenum. Chamber size: 600 mm x 600 mm x 900 mm Internal diameter of the working chamber: 1,000 mm External diameter of the working chamber: 1,280 mm Rodpfevrh Iusx Abmjbt External diameter of the vessel (without flange): 1,450 mm Height without wooden pallet: 1,900 mm Height with wooden pallet: 2,100 mm Width: 1,900 mm Length: 1,900 mm Weight with wooden pallet: 1,750 kg Inspection by appointment is possible at any time.

Year of construction: 1988, condition: as good as new (ex-display), machine/vehicle number: 1116/87, MANUFACTURER: ELTERMA/IPSEN MODEL: VDFC-413 Rbsdpfx Abem E Tvhomot DESCRIPTION: Vacuum tempering furnace YEAR OF PRODUCTION: 1988 STATUS: New unused, need revamping of the obsolete parts ( Cabinets ) Max Load Dimensions: 610x900x500mm Max Load Weight: 500 kg Working temperature: 150-750⁰C Approximate warm-up time of the vacuum chamber at 550 ° C for 30 minutes

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: 16109, Electrotherm HL-36x50-EQ-2 Vacuum Furnace Chamber (1997) Stokes Vacuum Pump System Digital Display Controller Slide Rail Track Part Entry Cart 1300 Max Temp Rodpfx Absx Ap N Rsmsbt Sublocation - Heat Treatment area.

Condition: as good as new (ex-display), Year of construction: 2023, type of input current: AC, El. heated roller sintering furnace, make Riedhammer type: TR 18/4x33/10-E 90 condition: as new length of debinding zone: 6.12 m length of heating/holding zone: 6.12 m length of the cooling zone: 6.12 m total length of oven without conveyors: approx. 18.4 m total length of oven with conveyors: 20.4 m total width of oven: 3.5 m total height of oven: approx. 2.5 m clear oven width: 1,540 mm Rbjdpep T Th Hefx Abmet usable width: 4x 330 mm usable height from top edge of roll: 100 mm roller spacing: approx. 85 mm roll diameter: approx. 50 mm number of oven conveyor drives (controlled): 3 pieces number of rule groups: 34 connected load of oven: approx. 476 kW maximum temperature on the thermocouple: 900 °C max. temperature: 930°C power type: 400/230V, 50Hz cooling water consumption: approx. 50 m³/h

Year of construction: 2023, condition: new, El. heated two-track plate pusher furnace, make Riedhammer type: TP12,75/2x20/15-E-145 condition: as new total length of oven: 15.5 m furnace width: 3.6 m voltage type: 400/230V, 50 Hz connected load: 17 kVA tolerated voltage fluctuation: 10% tolerated frequency fluctuation: 1% PLC: SIEMENS/Comfort Panel TP1500-15 product structure (L x W x H) including push plate: 200 x 200x 101 mm Tmax debinding zone (4 segments): 650 °C Tmax pressure compensation zone (1 segment): 750 °C Tmax main combustion zone (6 segments): 1450 °C Tmax cooling module 1: 600 °C Rbedop T T Hnopfx Abmet Tmax cooling module 2: 300 °C min. push time: 8 min max push time: 30 min number of conveyor plates: 266 pieces channel height: 105 mm

Condition: good (used), Cole Parmer vacuum furnace Cole Parmer vacuum furnaces are designed for drying under carefully controlled conditions - normal atmosphere, vacuum up to 30" Hg or inert gas atmosphere. The furnace enables drying, vacuum embedding, electroplating and processing of electronic components. Non-corrosive, non-flammable gases such as nitrogen and carbon dioxide can be used in the furnace. All controls and connections (except the power supply) are located on the front in a vertical panel. Manufacturer: Cole Parmer Model: 5053-12 Power: 600 W Voltage: 240 V Dimensions: 510 x 420 x 1200 mm Rbedpewxxgasfx Abmst You can find more items - new and used - in our store! International shipping costs on request!

Condition: as good as new (ex-display), vacuum drying oven Inside: 700 x 700 x 600mm deep Heating capacity: 3 KW Temperature range 1-120°C Outer dimensions: 1280 x 950 x 1280 Pressure range: Atmosphere - 0 Bar (Not suitable for overpressure) Rsdpfsfbl T Nex Abmebt A suitable vacuum pump is provided depending on the application. Supply line: 3ph , N, PE 400V, 50Hz CEE plug The interior installation can of course be completely removed!

Condition: good (used), debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm Rbsdpfx Aomfn Rusbmet external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 weight: 700 kg voltage: 400 V 3/N current consumption: 63 A - with an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - controllable cooling housing with autom. ball valve - automatic exhaust damper - automatic exhaust flap - monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor. -The furnaces themselves, particularly the brickwork, heating elements, and insulation, are in excellent condition with low or no working hours, making them practically like new. -To operate these furnaces, it will be necessary to implement at least one temperature controller per furnace, a PLC, or a similar control system.

Condition: good (used), Year of construction: 1995, functionality: fully functional, Useful Dimensions : W600*D900*H900 mm Loading Capacity : 800 kg/batch Cooling Pressure : 10 bar (abs.) Vacuum Level : 10exp-2 mbar (manufacturer specs.) Cooling Gas : N2 Rbsdpfxsvfpfze Abmjt

Year of construction: 2020, condition: like new (used), functionality: fully functional, Fully automatic sintering continuous furnace system Manufacturer: Sarnes Model: 600-G/CQI-9 Year of manufacture: 2020 (commissioned 2021) Programmable, with online diagnostic system. Fuel: natural gas Hydrogen + nitrogen (N2+H2) operation integrated The system has seen very little use and is in excellent condition. Offer / Quotation Date: 18.1.19 620 mm belt width, gas heated, N2/H2 operation, LED dewaxing zone, rapid cooling section (Pos 2), flameless discharge and ceramic muffle, Heating: low NOx RS Rekudrall burners, SiSiC burner tubes, installed heating capacity 320 kW in 8 zones, dual thermocouples, 100 mm usable height. LED 3 dewaxing zones ("low energy dewaxing" – utilization of chemically bound energy of the waxes and improved burnout conditions especially for heavy PM parts (>0.9 kg)). Dimensions: - Infeed table 2 m (target-actual belt speed compensation) - LED3 dewaxing zone: 1.5 m - Sintering zone length 7.5 m - Rapid cooling length 1 m - Convective cooling zone length 2 x 4 m - Flameless discharge with air shower 2 m - Outfeed table 2.7 m - Total system length 23.7 m - Width 2.3 m Connection ratings: Heating: installed power 320 kW Rbedpfexfcdyex Abmjt Natural gas: 25 m³/h (80 mbar) N2: 45-65 m³/h (max. 80 mbar) H2: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temp.

Year of construction: 2000, condition: excellent (used), functionality: fully functional, maximum load weight: 7,000 kg, working height: 1,750 mm, The gas nitration vacuum oven is made up of all the steps involved in gas nitration, carburizing, and tempering. The machine is in very good condition. Rbedou T N Efepfx Abmst

Year of construction: 2010, condition: refurbished (used), Vacuum furnace for heat treatment of metals with a molybdenum chamber. A high vacuum of 10^-6 mbar is achieved in the furnace. Maximum operating temperature 1300 C. Dimensions of the working chamber: 0.35 x 0.42 m diameter x height. Molybdenum heating chamber. Closed circuit cooling system with a buffer tank Pumping system with a mechanical and turbomolecular pump. Ability to perform processes: Rbsdpon Snx Hjfx Abmot • Annealing in high vacuum • Stress relief • Vacuum brazing • Vacuum brazing • etc. The stove is 100% functional after modernization. Sales with installation and commissioning at the customer's place. The final price depends on the scope of modernization, agreed individually with the client. If you have any questions, please contact us.

Condition: used, Year of construction: 1988, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 20992, Dear Mr. / Mrs., we have opportunity to offer you IPSEN VTTC-324 from 1988. Characteristic of vacuum furnace: Sn = 165 kVA Un = 400 V, 50Hz In = 240 A Useful dimension: 450mm x 600mm x 900mm Power of heaters = 120 kW Voltage of heaters = 43V, 50Hz Current of heaters = 1613 A Temperature range = 350 - 1320 C Absolute vacuum = 1 x 10e-5 (diffusion pump) Absolute pressure = 5 bar Rbodpswah R Rjfx Abmst Also, with furnace is coming lot of spare parts and equipment for thermal heating process (tank for gas, heaters, lot of controllers, chargers and everything). For all information that you need, please contact me.

Condition: excellent (used), I sell the pump FEZER 016-118 94213 Rsdjud Ryrjpfx Abmjbt - Pump in bdb condition. - Capacity 16m3/H

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 30 kg, total length: 33 mm, total width: 40 mm, total height: 130 mm, operating pressure: 2 bar, final pressure: 2 bar, warranty duration: 24 months, Pneumatic Vacuum Liquid Filling Machine – Constant Fill Level This vacuum liquid filling machine operates fully pneumatically and requires no electricity. A small compressor is sufficient to operate the machine. Thanks to the vacuum-controlled constant-level filling principle, each bottle is filled to exactly the same liquid level, regardless of bottle volume variations. This ensures a consistent and professional final result. Rbjdpfxjrivxys Abmst Compact, Lightweight, and Durable The machine is manufactured entirely from high-grade stainless steel, is compact in design, lightweight, and takes up little space. It is easy to place on a workbench, making it ideal for both production and testing environments. Versatile Applications Suitable for filling both small and larger volumes of liquid products, including: - Water - Perfume - Milk - Eye drops - Oils (such as sesame oil) - Beverages - Alcohol - And similar liquids Efficient Operation The machine is equipped with two filling heads, allowing for continuous operation. Depending on the operator and bottle volume, up to approximately 20 bottles per minute can be filled. Contact & Delivery For questions or further information, please feel free to contact us by email or telephone. Transport within and outside Europe is possible.

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Rsdpfx Abjul T Icjmsbt Vacuum system filter Machine dimensions in cm: Length: 300 Width: 180 Height: 200 Electric power: 7.5 kW

Condition: refurbished (used), Cutter Vacuum TIPPER-TIE 330V Rbodpfx Ajt Sv Ulobmet After renovation with warranty! Height: 2250 mm Width: 3300 mm Length: 2800 mm Capacity: 330 l Bowl construction - stainless steel Knife construction - stainless steel Electric power supply: 400V 50Hz 3N Total power: 141 KW - Knife rotation: 540/960/1930/2880/3850/4050.-smooth adjustment - Bowl rotation: 3.5 / 6.5 / 10 / 13.5 - Mixing speed: -70/120 - bowl rotates to the left - Power: 141 kW - Weight approx. 7800 kg - Number of knives – 6 pcs.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, BMB CP 10.65 industrial vacuum band conveyor, year 2020, in good working condition. This unit is designed for precise product handling where components need to be held securely on the belt using vacuum suction – commonly used in packaging lines, slicing lines, portioning, thermoforming infeed, and quality-control sections. Machine is clean, fully functional, and was used in a controlled food-tech production environment. Redpfxjx Afcaj Abmsbt Technical details: • Model: CP 10.65 • Year: 2020 • Vacuum suction conveyor with belt perforation • Stainless steel hygienic construction • Adjustable vacuum intensity (depending on your plant setup) • Suitable for food industry, packaging lines, portioners, and automated systems • Easy-clean design • Compact footprint (photograph for exact dimensions) Condition: • Fully functional • Good mechanical condition • Belt in good shape • No corrosion or frame damage • Ready for immediate use Machine located in Best, Netherlands.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 34.3 kW (46.63 HP), input voltage: 460 V, input frequency: 50 Hz, input current: 43 A, type of input current: AC, Performance data & key technical specifications (derived): WHU 2500 nominal throughput approximately 430 m³/h (at 50 Hz) for the WH/WHU 2500 version. Inlet flange DN 250 ISO-K, outlet flange DN 100 ISO-K on WHU 2500. Water cooling of the motor/system. Rodpfx Ajx Aqa Dobmjbt DV650S: Nominal suction capacity 650 m³/h at around 5×10⁻³ mbar ultimate vacuum.

Condition: excellent (used), functionality: fully functional, Model: TMBBB662005A Pump Model: TMB10662005A Pump Type: ADIXEN ATH2303M Controller Model: 123744 Controller Type: OBCV4 PROF IP54 Firmware: Vi 3.01.00 / Vv 1.08.02 / Vm 3.11 Year of Manufacture: 2018/2019 Rbjdpfsx Ap I Tox Abmjt Operating Hours Pump: approx. 25,000 h

Condition: good (used), Busch Vacuum Pump Model 630 370 CFM Rodpfxowa Nzqo Abmjbt

Condition: good (used), Busch Vacuum Pump Rjdpfx Aowa Ra Usbmsbt Model 400

Condition: good (used), Busch Vacuum Pump Rbodpfjwa Ucgsx Abmjt Type: 400-212 235 CFM Dimensions: 1300 mm x 800 mm x 1100 mm.