Used Vacuum Evaporator for sale (3,801)

Condition: used, Year of construction: 2018, Overview  This vacuum evaporator was manufactured in 2018 by Italian manufacturer REDA. The machine is designed for gentle concentration of musts, juices, and other liquid products at low temperatures to preserve aromas and product quality. It is almost new and offered for sale as it was intended for a project that did not proceed. The system features an automated, CIP‑ready design. Technical data  - Capacity: 100 L/h evaporation capacity at +22/+24 °C - Application: Concentration of musts, juices, and liquid products - Operating modes: Recirculation mode or direct concentration mode - Max. concentration: 55–70 °Brix - Daily output: 2,400 L evaporated / 24,000 L enriched to 10% - Utilities: - Electrical supply: 25 kW, 380 V / 3Ph / 50 Hz + PE - Water: +12/+18 °C (low consumption) - Compressed air: 6–8 bar - Connections: DN40 DIN, 50 mm hoses - Control system: PLC automation, IP65 control cabinet, digital temperature indicators Scope of Delivery  Ledpfxeykrdbe Agporp - Vacuum evaporator | REDA | CM100 | 2018 | Complete AISI stainless-steel construction - Evaporation chamber | Stainless steel, full inspection access - Heat exchanger | AISI 316L tubular exchanger - Vacuum pump | Liquid-ring system with cooling recirculation - Refrigeration group | Heating 75,000 kcal/h, cooling 60,000 frig/h, 2 × 12.5 HP Copeland compressors - Pumps | Stainless-steel centrifugal and mono volumetric discharge pump - Vapor condenser | Stainless-steel surface condenser - Instrumentation & tanks | Flowmeters, cold and hot water stainless-steel accumulation tanks

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Process Description The concentration unit was used from 2012 to 2022 to distil wastewater to a solid content of around 40%. Based on owner's experience, the flow rate was between 8 m³ and 12 m³ per day. The unit consists of a distillation vessel (S101) operated under vacuum, with a pipe heat exchanger (E101) functioning as the condenser, through which the wastewater is pumped by the circulation pump (P102). The pipe heat exchanger heats the wastewater for distillation. The concentrated wastewater can later be removed from the system by pump (P103). Vapors enter the plate heat exchanger (E102) and enter the accumulator (S103) as condensed liquid, this is removed from the unit. The non-condensed vapor passes through the vacuum pump (P101) and enters the vacuum pump vessel (S102), where it is cooled with an internal spiral. System can be described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Full documentation for equipment available. Lodjzcwitepfx Agperp

Condition: good (used), Year of construction: 1985, functionality: fully functional, Equipment: compressor, Manufacturer: GEA / Laguilharre Year of construction: ~1985 4 stages – 6 tube bundles MVR + TVR evaporator Use as a pre-concentrator from 6 to 32% DS Use as (high) concentrator 9 to 50% DS Feed rate: 20,000 l/h whey Lrsdpfxsyvrtuo Agpsp Evaporation performance: 15,000 l/h Including pasteurizer with steam injection Electrical power of MVR compressor: 140 kW TVR steam consumption: 850 to 1,000 kg/h Pasteurizer: 300 kg/h

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: compressor, Manufacturer: GEA Year of manufacture: 2012 Model: 2 MVR 1 Feed rate: 35,000 l/h with whey Evaporation capacity: up to 25,000 kg/h Lrodeyvrwtepfx Agpep Type: MVR evaporator with TVR finisher (High-)concentrator: from 20 up to 60% DS Including pasteurizer via steam injection MVR compressor: PILLER MVR compressor power: 456 kW Steam consumption finisher: ~900 kg/h Steam consumption pasteurizer: 900 - 1,700 kg/h

Condition: like new (used), functionality: fully functional, Graham Vacuum Pump DF/SCH00058 Type: 2 067/180 20006 171 ID no 12320594/1 Ledpfjznpagjx Agperp Unused, ex stores stock. Unit was purchased as a spare, but never used.

Condition: good (used), Vacuum Filler Line Make: Handtmann Model: VF200 Complete with loader Lrjdpjznkfdsfx Agpjp *With Handtmann Meatball forming attachment*

Condition: ready for operation (used), Vemag vacuum filler, Model Robot 500 With portion control Twin stainless steel augers Will continuous straight fill With portion weights With PC 878 controls Lrjdpfxjy N Skas Agpsp

Condition: excellent (used), I sell the pump FEZER 016-118 94213 Lodpfxoud Ryre Agperp - Pump in bdb condition. - Capacity 16m3/H

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 300 Ledeul T Icjpfx Agperp Width: 180 Height: 200 Electric power: 7.5 kW

Condition: good (used), functionality: fully functional, Pfeiffer Vacuum Technology AG Turbo Molecular Pump with MAGPOWER Controller, Q2662100, ATH 2300M Model: Q2662100 Type: ATH2300M Condition: Used Technical Data: ATH-M 200–240V AC 50/60Hz General: Magnetically levitated turbo molecular pump Water cooling Magnetic bearing (Maglev), oil-free Speed: 39,000 min⁻¹ Pumping speed N₂: approx. 1,600 l/s Ultimate pressure: < 6 × 10⁻⁹ mbar Motor: 40 Vrms, 1033 Hz, 12 Arms Inlet flange: DN200 ISO-F Outlet flange: DN 40 ISO-KF External electronics (Magpower) Adixen by Pfeiffer Vacuum Controller MAGPOWER S12A P/N: 120917 Rev. G Vi: V2.10.00 / Vn: V2.08.00 Vv: V2.10.00 Vm: V3.11 Accessories: Pfeiffer/Adixen pump cable A215300 - Pump-2-MAGPOWER cable for connection between turbo molecular pumps and control units Lrsdpfx Agjzh I I Nepop Power cord: Hubbell HBL4770C (NEMA L7-15P, 277 V / 15 A) Remote control / I/O cable (DB25) Note on item condition: Gases passed: NF₃/N₂

Condition: used, Year of construction: 2008, operating hours: 13,000 h, functionality: fully functional, Pfeiffer Vacuum GmbH Turbomolecular pump with electronic drive unit, ProfibusDP gateway and accessories, PM P03 020 GA, TPH 2101 P + TIC 250 Model Turbomolecular Pump: PMP03020G, TPH2101P Model Gateway: TIC250 Turbo molecular pump: Serial number: 14219214 YoM: 2008 Nominal connection size inlet: DN 250 ISO-K Nominal connection size outlet: DN 40 ISO-KF Flood connection: G1/8" Ljdpfxjncd S Ue Agperp Rated speed: 31.500/min (525Hz) Pumping speed N2: 1.900l/s Max. Prevacuum pressure N2: 1,5mbar Max. Prevacuum pressure He: 1,0mbar Max. Prevacuum pressure H2: 0,5mbar Oil: PM 016 144-T Note on condition: 1. statements on the operation hour time is about 13,000h with about 1,600 start-up and shut-down. 2. process gases: nitrogen and argon 3. process dusts: chromium nitrite and steel 100Cr6 4. the pump was stored fully functional in 2018 and externally cleaned.

Condition: new, Year of construction: 2026, Rotary dry vane vacuum pump. Pump completely new. 12 months warranty Marpa Vacuum pump with equivalent characteristics to the Becker VT 4.40 model. Unbeatable prices. Lrodpfx Agoftzd Sepjp Nominal flow: 40 m3 / h at 50Hz. Final vacuum: 150 mbar abs. Any clarification, do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 34.3 kW (46.63 HP), input voltage: 460 V, input frequency: 50 Hz, input current: 43 A, type of input current: AC, Performance data & key technical specifications (derived): WHU 2500 nominal throughput approximately 430 m³/h (at 50 Hz) for the WH/WHU 2500 version. Inlet flange DN 250 ISO-K, outlet flange DN 100 ISO-K on WHU 2500. Water cooling of the motor/system. DV650S: Nominal suction capacity 650 m³/h at around 5×10⁻³ mbar ultimate vacuum. Lrsdpfxjx Aqa Do Agpsp

Condition: excellent (used), functionality: fully functional, Model: TMBBB662005A Pump Model: TMB10662005A Pump Type: ADIXEN ATH2303M Lrodpfox Ap I Tsx Agpep Controller Model: 123744 Controller Type: OBCV4 PROF IP54 Firmware: Vi 3.01.00 / Vv 1.08.02 / Vm 3.11 Year of Manufacture: 2018/2019 Operating Hours Pump: approx. 25,000 h

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 15040169 + 0805014349, Pfeiffer Vacuum GmbH Turbomolecular pump with drive electronics, PM P03 020 GA, TPH 2101 P + PM C01 713, TC 750 Turbo pump model: PMP03020GA, TPH2101P Drive electronics model: PMC01713, TC750 Turbomolecular pump: Serial number: 15040169 Inlet connection nominal diameter: DN 250 ISO-K Outlet connection nominal diameter: DN 40 ISO-KF Flood connection: G1/8" Nominal speed: 31,500/min (525Hz) Suction speed N2: 1,900l/s Max. backing pressure N2: 1.5mbar Max. backing pressure He: 1.0mbar Max. backing pressure H2: 0.5mbar Oil: PM 016 144-T Drive electronics: Serial number: 0805014349 Input: 24/48/72/140V DC +/-5%, 5.4A Output: 0-140V AC, 0-1600Hz, 6.5A Note on condition: Lrjdpovrzakefx Agpep 1. Statements on operating hours are approx. 13,000h with approx. 1,600 starts and stops. 2. Process gases: nitrogen and argon 3. Process dusts: chromium nitride and steel 100Cr6 4. The pump was stored in full working order in 2018 and cleaned externally.

Condition: used, 11375, WSU 501 H, Ruvac Oerlikon Leybold Vacuum GmbH Roots vacuum pump Lrjdpfxjq S Tk Ho Agpjp Model: 11375 Type: WSU 501 H Condition: Used

Condition: used, 800040V1444, T1600, Oerlikon Leybold, turbomolecular vacuum pump Lodpfx Asvrgd Isgporp

Condition: as good as new (ex-display), 844224V0004 + 400000250, COOLVAC 1500 / COOLVAC1500, Oerlikon Leybold vacuum cryopump - like new Ledeh Igffspfx Agporp Model: 844224V0004 + 400000250 Type: COOLVAC 1500 Condition: Like new

Condition: used, A 124H, F4HE4CL06611010, Pfeiffer Vacuum, vacuum pump, SN:AP8086636 Model: A 124H Lrjdpfx Agot Iggwepep Type: F4HE4CL06611010 Condition: Used

Condition: used, 800040V1444, TURBOVAC T1600, Oerlikon Leybold turbomolecular pump Lrjdorf U Trspfx Agpop Model: 800040V1444 Type: TURBOVAC T1600 Condition: Used Note on condition: free of contamination

Condition: excellent (used), functionality: fully functional, Pfeiffer Vacuum GmbH Turbomolecular Vacuum Pump, PM P02 420 C, TMH 520 Model: PMP02420C Type: TMH520 Lredpfx Ajxpu Sqjgpop Condition: Used

Condition: as good as new (ex-display), 844224V0002 + 400000250 + 400000801, COOLVAC 1500 + RGD 7/25 / COOLVAC 1500 + RGD 7 25 / COOLVAC1500 + RGD725, Oerlikon Leybold vacuum cryopump - as good as new Model: 844224V0002 + 400000250 + 400000801 Lrsdpfx Agoq S Twgjpjp Type: COOLVAC 1500 + RGD 7/25 Condition: as good as new

Condition: as good as new (ex-display), 252009, Oerlikon Leybold Radio Transmitter RT100 /St1 + RT 100 /St2 - As New Model: 252009 Condition: As New Lrsdpfxoq S Sq Aj Agpop

Condition: as good as new (ex-display), 230116, CM52PB, Oerlikon Leybold COMBIVAC evaluation module with display - As good as new Model: CM52PB Lodpfxsq S Sp Ej Agpjrp Condition: As good as new

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 129801012, overall weight: 1,750 kg, total length: 7,400 mm, total width: 1,700 mm, total height: 2,130 mm, power: 4 kW (5.44 HP), input frequency: 50 Hz, input current: 12 A, We offer this very well-maintained vacuum pump FBSW 2012nac vacuum packaging machine, manufactured in 2012. Vacuum pump AM120 NAC for shrink film and vacuum packaging machines Length x Width x Height: Ljdpozcyvvofx Agporp 1x 3100x1700x2130 cm - 750kg 1x 4300x1700x2000 cm – 1000kg (on wheels) This is a shrink machine consisting of 2 parts. Location: 65451 Kelsterbach Collection: EXW Kelsterbach / Self-collection For sale is a high-quality vacuum pump, model AM120 NAC, manufactured in Italy, suitable for shrink film and vacuum packaging machines. Technical data • Model: AM120 NAC • Drawing No.: 038501 • Year of manufacture: 2012 • Frequency: 50 Hz • Current consumption: 12 A • Power: 4 kW • Country of manufacture: Italy Condition The vacuum pump is in good used condition. The system is currently out of operation and switched off. Until it was shut down, it was used as intended. Other • Inspection possible by appointment. • Sale from the location 65451 Kelsterbach. • Self-collection by the buyer. If you are interested or have any questions, please contact us. _____ If you have any further questions or require more information, please send us a message or call us.