Used Vacuum Sintering Furnace for sale (4,186)

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." Gedpjxw Uyqofx Abretu For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: good (used), Year of construction: 2008, Vacuum lifter Gtsdpfxoqxat Hs Abrju VacuMaster Type:VM-ECO-500-H-1 Year 2008 in good condition .

Condition: used, Vacuum lifting device, vacuum lifter RIVATEC UNIGRIPPER Custom-made as a handling device for an industrial robot Year of manufacture: approx. 2008 Load capacity: approx. 50 kg - 7 suction pads Ø 32 mm (design allows for 12) - 16 suction pads Ø 42 mm (design allows for 20) - 5 suction pads Ø 60 mm (design allows for 6) - a few suction cups missing, see photos (bellows suction pads) - swiveling base body for suction surface at 90° angle or flat 180° - base body pneumatically swiveling - Very elaborate and precise construction with linear guides - Flange plate for suspension or attachment to the robot - Equipped with many Festo components Required space (L x W x H): 620 x 300 x 300 mm Net weight: 28 kg Good condition Gtjdpswywipefx Abreu 2 units available, price indicated per unit

Condition: used, machine/vehicle number: 57.517, color: other, Year of construction: 2004, Year of manufacture: 2004 Empty weight: 38 kg Carrying capacity: 400 kg GVW: 438 kg Gjdsyir Dlepfx Abretu Probst SM Vaccuum lifter Net weight: 38kg Lifting capacity: 400kg Year of construction: 2004

Condition: used, mileage: 406,194 km, power: 265 kW (360.30 HP), first registration: 05/2002, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro3, Equipment: ABS, * Municipal vehicle * ABS * ASR (traction control) * Reversing camera * Cruise control * Analog speedometer * Electric window lifts * Electrically adjustable mirrors * Mirror heating * Roof hatch * Rear axle differential lock * Lift/steering axle Gtodpfxsykc Tge Abrou * Amber rotating beacon * Exhaust behind cab * Air dryer * EDC (Electronic Diesel Control) * Radio * Central locking * Fog lights * Driver comfort seat * Seat heating * Central lubrication system * 16-speed transmission * Suspension: leaf/air * Payload: 11,000 kg * Continuous brake: engine brake ----Body: Wiedemann und Reichardt suction-pressure tank body, type 10.0//2.0/320 (year 2002), 2 chambers (10,000 l sludge/2,000 l water), tiltable, hydraulic rear door, suction hose reel 30 m/DN 100, high-pressure reel on rear door 120 m/DN 20, radio remote control + walk-around control. Pratissoli high-pressure pump KF-40, 152 l/min, 100 bar; Jurop vacuum pump PR 330, 1,780 cbm/h. Recorded operating hours: HD pump: 1,305 h, vacuum pump: 6,430 h Sale exclusively to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL DETAILS WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. All purchase agreements, invoices, pro forma invoices, orders, and sales discussions are subject to our general terms and conditions (see legal notice).

Condition: excellent (used), Dissolver Schneider SH 07 Vacuum dissolver Ex-protected version with wall scraper Drive power 13 kW power wall scraper 2,5 kW speed range 380-2000 1/min Mixing tank stainless steel double jacket 2 x 100 l usable capacity, 50 l capacity heating chamber Mixing tank stainless steel 1 x 200 l Gtodpfeimgqmsx Abreu Very good condition, directly from production!!!

Condition: like new (used), Year of construction: 2012, functionality: fully functional, material size max +/_ 2600 x 4000 mm automated tilting table /conveyer inlet to pre-heating furnace painting line Gsdpfx Abjyiyn Ssrotu

Condition: excellent (used), Eos EOSINT We are offering an Eos EOSINT plastic laser sintering system for sale. The EOS P380 system includes the following components: Build chamber container Powder container Overflow container 3DM 8-zone process chamber heater, 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin Build volume: 350mm x 350mm x 610mm Power supply: 3/N/PE/400V AC Frequency: 50 Hz Connected load: 8 kW Fuse protection: 32 A Maximum laser power: 100 W Laser class (open): 4 Laser class (closed): 1 Weight: 850 kg Model: EOSINT P 380 Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) Gjdpjgqux Nsfx Abrotu For further questions, feel free to contact us by phone.

Condition: used, Used Schwarte-Milfor vertical stainless steel storage tank: Gsdpfx Asygvkkjbrstu - Manufacturer: Schwarte-Milfor - Capacity: total capacity 5720 litre, working capacity 5300 litre - Construction material: AISI 316L - Internal rated: -1/3 bar maximum pressure at 139°C maximum internal temperature. - Dimensions: 1500 mm diameter x 2500 mm straight side x approx. 4480 mm total height, diameter of vacuum ring reinforcement is 1652 mm. - Welded dished top and welded conical bottom. - Central top inlet/bottom discharge internal dia approx. 100 mm. - Has top manway with diameter 450 mm. - Mounted on (4) lugs. Specifications: Capacity: 1,430 gal Diameter: 1,500 mm Height: 2,500 mm Type of stainless: AISI 316L Type Of Heads: Dished top head and conical bottom Vertical/Horizontal: Vertical Legs/Lugs/Skirt: 4 lugs

Condition: used, functionality: unexamined, machine/vehicle number: IL 70 NEW LOOK, overall weight: 230 kg, volume flow: 70 m³/h, input voltage: 380 V, Used BOC Edwards IL 70 Semiconductor Dry Vacuum Pump Manufacturer: BOC Edwards Gtjdoxiwxmspfx Abrsu Model: IL 70 New Look Voltage: 380 volts Maximum pump capacity: 1166 l/min or 70 cubic meters per hour Down to 0.05 mbar. Weight: 230 kg

Condition: new, mileage: 50 km, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: # 533 Mercedes Benz ACTROS 2546 6x2/ Kroll ADR Suction Unit, K 1.0 - 13.5 / 36 PESP This Mercedes-Benz Actros 2546 6x2 is equipped with a high-performance KROLL suction/pressure tank body of ADR class L4BH and, with a 14,500-litre tank capacity, VacuStar W1300, and Speck P45/85-160, offers a robust and efficient solution for demanding industrial, sewer, and emulsion suction applications. Featuring a telescopic DN100 boom, extensive special equipment, and comprehensive safety and comfort features, this vehicle is optimally equipped for professional use. Body Manufacturer: KROLL Fahrzeugbau-Umwelttechnik GmbH * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle K 1.0-13.5 / 36 PESP * 14,500 litre tank capacity (air volume) * 10,000 litre sludge volume | 3,500 litre emulsion chamber * 1,000 litre flushing water capacity (non-pressurised) * Discharge with ejector piston Chassis MB ACTROS 2546 6x2 * Automated transmission * 460 HP / 338 kW * 2,200 Nm * EURO 6 * Fuel capacity approx. 500 l * Cab colour MB 9147 Arctic White * 2x LED beacons on cab Gsdpfex Eqmxex Abrotu * Rear view camera * Navigation * Air conditioning * Cool box Vacuum system? CVS VacuStar W1300, approx. 1,200 m3/h at 400 mBar * Suction hose cassette with telescopic boom and 20 m DN100 High-pressure system? Speck P45/85-160 / approx. 85 l/min at 160 bar * Small hydraulic HP hose reel for 60 m DN 13 * Approx. 60 m flushing hose DN 13 Special features ADR version L4BH, type class FL incl. EX/II, EX/III and AT * Suction connection pre-piston chamber DN100 remote-controlled * Manhole DN500 on the left side * HP gun * Acoustic insulation on both sides in front of the pumps * LED surrounding area lighting * Radio remote control with two batteries * Tilting scrap box * Rear view camera * Ladder with holder and anchor points * Advertising boards left and right on tank Technical Data: GVW 26,000 kg * Length 10,700 mm * Height 3,800 mm * Width 2,550 mm * Wheelbase 3,900 mm Conclusion: A professionally equipped Mercedes-Benz Actros 2546 with a high-performance KROLL ADR suction/pressure tank body, VacuStar W1300, Speck high-pressure system, comprehensive comfort and safety features, and a telescopic DN100 suction arm. An ideal solution for industrial, sewer, and emulsion suction projects where performance, efficiency, and reliability are essential. For further detailed information and/or photos, please contact us directly. You will find a large selection of other vehicles for SALE or RENT at: Subject to changes, prior sale, and errors. The buyer is required to independently verify the condition and equipment of the goods. The sale is made exclusively under our terms and conditions and with exclusion of any warranty.

Condition: used, mileage: 20,000 km, power: 335 kW (455.47 HP), first registration: 07/2025, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #511 Mercedes-Benz Arocs 2546 6x2 with combined high-pressure cleaning and suction-pressure tank superstructure ADR Type K 14.0 / 28 PE Body by KROLL Fahrzeugbau-Umwelttechnik GmbH * Tank material: S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle Type K 14.0 / 28 PE * Telescopic piston with 3 locking positions Gsdpfxsxc Szis Abrotu * (3,300l water / 10,600l sludge, 5,500l water / 8,200l sludge, 7,700l water / 6,000l sludge) * Suction from open waters possible—"comfort version" via cassette boom with integrated filter * Tanker equipment according to ADR - type class AT/FL L4BH * EMPTYING: via pneumatically-actuated piston * SLUDGE WATER DRAIN DN 80: for pushing the dirty water back through the boom into the sewer. Vacuum system CVS VacuStar 1600 approx. 1,550 cbm/h at 400 bar * Approx. 20 m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Parallel guidance suction and high-pressure hose via boom * Suction hose reel hydraulic right-side with 30 m DN 75 (can be fully suctioned through) High pressure system Uraca KD 718 approx. 315 l/min at 170 bar * Large HD hose reel for 240 m 1" DN 25, 180° pivotable * Equipped with 160 m DN25 * Small HD hose reel for 80 m DN 13 hydraulically operated * Equipped with 80 m DN13 Special features hose storage cassette with telescopic boom DN 125 * Infinitely adjustable height of suction hose hydraulically via roller guide carriage * Extension arm for suction hose hydraulically and telescopically extendable and 180° pivotable * ADR version L4BH type class FL incl. EX/II, EX/III, and AT * Spray gun * LED beacon lights * LED area lighting * Remote operation of work functions via CAN-BUS technology * Radio remote control with 14 functions * Hand-washing unit (heated) * Large cupboard rear left, e.g. for push camera * Reversing camera with 7'' color monitor incl. day/night mode * Noise protection panel in front of pump room * Large tool compartment * Toolbox * Holder for traffic cones * Vice * Ladder * Large advertising boards on right and left Special equipment: Chassis cover, axle load measuring system, front axle load 9.0 t, airbag driver's side, 220 Ah battery, battery master switch, standard and DuoMatic brake connectors, interactive multimedia cockpit, air pressure horn, electrical pre-wiring in cab 24V / 100A, driver assist system: high beam assistant and cornering light, driver assist system: traffic sign recognition, suspension: front springs 9.0 t, 4-leaf, tinted windshield with band filter, hazardous goods version ADR type FL, generator 150 A, speed limiter, gearbox 16-speed - type: G 280-16, rear axle crown wheel 300, cab air filter for construction vehicles, 3-piece mudguards, 3-piece mudguards with splash protection, fuel tank: 330 L aluminum left side, cooling system for hot climates, trailing axle 9 t steered, loadable, liftable, navigation system, PTO - flange splined, PTO gearbox-independent and clutch-dependent MB 1.65, parameterizable special module, chassis lowering without residual air pressure regulation, chassis overhang 1350 mm, smoker's package, rain sensor, tire pressure monitoring system, acoustic reverse warning and warning flash light (external warning signal) For further detailed information and/or images, please contact us directly. You can find a wide selection of more vehicles for SALE or RENT at: Changes, prior sale and

Condition: used, mileage: 235,530 km, power: 324 kW (440.52 HP), first registration: 04/2011, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, color: green, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2011, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ MAN TGS 28.440 6x2-2 BL Wiedemann SUPER 1000 – available by arrangement Internal Ref. #515 Chassis * MAN * TGS 26.440 * 6x2-2 BL * 440 HP / 324 kW * EURO 5 * MAN transmission * N-drive NMV 221 * 4,200 + 1,350 mm wheelbase * Front suspension: parabolic springs, 9.5 t * Rear suspension: air for high center of gravity * 400-liter fuel tank + 60-liter AdBlue * 385/55 R 22.5 steering axle, TL 160&K * 315/70 R 22.5 drive axle, TL 154/150&K * 385/55 R 22.5 steering axle, TL 160&K * Chassis color: RAL 9011 graphite black * Halogen beacon lights Gsdswu Syxspfx Abretu * 'M' cab, 2,240 mm wide, 1,880 mm long * Air conditioning * Reversing camera Body * Wiedemann enviro tec * Super 1000 8.0/4.0 water recycling system * 12,000-liter tank capacity * 4,000-liter water compartment * 8,000-liter dirty water compartment * Emptied by hydraulic tilting, 45° Vacuum System * Wiedemann & Reichhardt KW 3000 * 3,000 m³/h, 80 kW * Piping: DN 150 * approx. 25m suction hose DN 125 * Suction pipe DN 125 High-Pressure System * Uraca P 3-45, 407 liters at 175 bar * High-pressure reel for approx. 180m DN 32 with automatic rewind * Hydraulic jetting hose reel with approx. 60m DN 13 Special Features * Sludge tank made of stainless steel 1.4301 * Suction and HP booms * Warm water hand-washing unit * Stainless steel toolbox * Control cabinet with display * NMV start can be activated from control cabinet * Remote control * Equipment cabinet with hatches * Hose tray * Pump compartment with soundproofing extended upward * LED work lights Technical Data * Unladen weight: 18,080 kg * GVW: 28,000 kg * Length: 10,900 mm * Height: 3,650 mm * Width: 2,550 mm For further details and/or images, please contact us directly. A wide range of other vehicles for SALE or RENT can be found at: Subject to change, prior sale, and error. The buyer is obliged to independently verify the condition and features of the goods. Sale exclusively according to our terms and conditions and without any warranty.

Condition: used, Year of construction: 2021, Overview  The filler + capper block was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to process explosive products. The machine can be purchased with warranty.  Technical data  Fully automatic rotary filler Filling system: mass flow meter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Max. container dimensions: Height: 50-300 mm, Ø: 20-100 mm Pressurized feed tank for constant flow through flow meter  Below level filling to avoid foam formation during filling  Adjustable bottle neck centering  Electr. level measurement  CIP capable  Designed for riser pipe processing Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting and cap feeding via BONINO disc sorter with elevator With inside drop switch to switch off the machine in case of missing closures Cap hopper  Cap control Gtodpjmk I Dtofx Abrou

Condition: used, Year of construction: 1999, Overview  The Sensometic vacuum filler was built by Krones in 1999. The offer also includes rinser, Alcoa cappers and a blocked labeler. The machines can be inspected at any time.   Technical details  Output  12,000 bottles/h with 0.7l glass bottle  10,000 bottles/h with 1.0l glass bottle  6,000 bottles/h with 1.5l PET bottle  Formats  0.7l glass bottle  1.0l glass bottle  1.5l PET bottle  Plastic closure  Screw cap 28 mm  Push-on cap  Label  Body, back, neck loop, neck ring  Bottling product  Raspberry and various fruit syrups   Special hesperide vinegar   Filling temperature: 25°C   Running direction: L-R   Siemens S5   Scope of delivery  Rinser | Krones | Variojet | 3-channel rinser; steam, sterile water, air  Vacuum filler | Krones | Sensometic |   Capper | Alcoa | PP 10 / 360   Capper | Alcoa | K 10 / 360  Cold glue labeler | Krones | Prontomatic   Gsdjukkvnjpfx Abretu

Condition: used, Year of construction: 2018, Overview  The gravity filling machine is a rotating machine that works automatically and is suitable for filling bottles, cans made of zinc sheet or jars. It is used to add liquids (such as brine, oil, vinegar, sauce, sugar water, etc.) into containers filled with solids. It is also used to fill empty bottles. The filler block can be viewed at any time.  Technical details  Number of filling places: 48  Pitch circle diameter: 1560 mm  Capacity (last):  250- 300 bottles/ min at 500ml fruit syrup. For used twist-off cap an additional capper would have to be organized  160 - 200 bottles/ min at 250ml maple syrup  Used plastic cap can be applied by installed AROL capper  Dimensions  Length: 3.000 mm Width: 2.500 mm Height: 2.500 mm Weight: 6.500 kg   Electr. characteristics Voltage: 400 V - 50 Hz  Auxiliary voltage: 24 V DC  Installed power: 20 kW  Scope of delivery  Filler | Zilli& Bellini | GD48/12 | 2018 Capper | Arol | TSI - EURO VP - W6 | 2018 Gedpfx Absnhikieretu

Condition: used, Year of construction: 2019, Overview  This vacuum filling and capping monoblock was manufactured in 2019 by the German company ALWID Maschinenbau GmbH. The model ALWID-SUPERIOR-48HV-10PP is designed for level filling of glass bottles using a high-vacuum system, making it ideal for low- to medium-viscosity liquids such as spirits or similar products. The system features 48 filling valves and a 10-head ROPP capping unit, ensuring efficient, high-precision operation. With a performance of up to 12,500 bottles per hour (0.7 L), it offers a professional solution for high-speed bottling lines. The machine is CIP-capable, equipped with spray balls, and includes a Siemens S7 control system. It has approximately 14,000 operating hours and is already dismantled. Missing peripheral components such as the cap sorter, bunker conveyor, and chutes can be procured upon request and a factory overhaul is also available upon demand. Technical data  Filling system: High-vacuum with liquid ring pump Capping system: 10-head ROPP (PP) closer Capacity: Up to 12,500 bph (0.7 L bottles) Filling valves: 48 Bottle size: Max. 105 mm (W) × 65 mm (D) for shaped bottles (every second valve used) Control system: Siemens S7 Cleaning system: CIP with spray balls Operating hours: Approx. 14,000 h Working direction: Right to left Dimensions (machine): 4.20 m × 2.80 m × 2.90 m (W×D×H) Dimensions (filling tower): 1.40 m × 1.30 m × 3.40 m (W×D×H) Scope of delivery  Filling and capping block | ALWID Maschinenbau GmbH | ALWID-SUPERIOR-48HV-10PP | 2019 | High-vacuum filler with 48 filling stations and 10 ROPP capping heads, Siemens S7 control system, CIP-capable, approx. 14. 000 operating hours Filling tower | ALWID Maschinenbau GmbH | - | 2019 | 3.40 × 1.30 × 1.40 m, part of the system Format parts | ALWID Maschinenbau GmbH | - | 2019 | 10x PP28x22 mm deep capping heads, 1x format set for 76 mm straight-neck bottle Accessories | 2 EURO pallets with format and head components   Gsdoxqhvlopfx Abrotu

Condition: used, Year of construction: 2018, Overview The filler and capper was originally built by the Stork company and was overhauled by the ROBAK company in 2018. The machine can be used to fill still beverages into glass bottles. The machine is in excellent condition, currently dismantled and stored in a well-maintained environment. Technical data  Capacity: 7.000 bph Filler is prepared for 700 ml bottles 31,5mm aluminum cap The machine is missing a cap aligner and a cap slide and feeder. These should be made for a specific cap Gtsdpemnkhfsfx Abreu

Condition: used, Year of construction: 2004, Overview  This low-pressure vacuum filler was manufactured in 2004 by MBF. The machine was in use until 2017 and was fully functional at the time of shutdown. It was replaced due to the increased demand for carbonated products, which required a different filling principle (counter-pressure). Since then, the machine has been stored dry and protected, with only minor dust present. It is promptly available for sale. Technical data  Capacity: 6,000 bph (1.0 l bottles) 7,000 bph (0.75 l bottles) Bottle diameter: 55–120 mm (via steplessly adjustable in/outfeed stars) Bottle height: 150–370 mm Number of filling valves: 36 Filling principle: Low-pressure vacuum filling Running direction: Left to right Filling valve type: Electropneumatic Special features: Programmable bottle parameters with automatic adjustment for bottle height and fill level Hot filling capable with auto shutdown at temperature deviation Automatic speed adjustment based on bottle infeed CO₂ pre-flushing of bottles Inert gas overlay possible in the filler bowl Auto fill level control depending on product temperature Auto wine changeover via CIP tray CIP dummy bottles and semi-automatic cleaning program Remote maintenance modem Complete documentation (spare parts list, wiring diagram) Central electric fill level adjustment Scope of Delivery  MBF Fillmatic 36LV Filler CIP dummy bottles CIP tray Tele-Modem Complete documentation (electrical and spare parts) Gtodpfxowiu Nle Abrju

Condition: used, Year of construction: 2019, Overview  The ALWID-KRONE-HV is a semi-automatic filling machine working with high vacuum. This model is suitable for filling still media into dimensionally stable containers. Many bottle shapes and sizes can be used, no format parts required. The filling level is set directly on the valve, so it remains constant regardless of the bottle volume. Vacuum level adjustable. Technical data  Filling points: 2 Filling valve diameter:  mm Suitable for filling highly viscous media Fields of application: food, beverage, pharmaceutical and chemical industry Gtjdpfx Ajxb Unisbrou

Condition: used, Year of construction: 1998, Overview  This vacuum filler was built in 1998 by Italian manufacturer GAI. In 2024 the machine was fully refurbished and is available immediately.   Technical Details    Effective Capacity: approx. 4,500-5,000 bottles/hour  Machine equipped for the following bottle formats: Bordeaux 75cl (diameter 78mm) - Burgundy 75 - 37.5cl - Magnums  Rinser with 20 clamps, inspected  Filler with 20 taps and vacuum system (new turbine) - taps inspected, new gaskets. New seating springs.  AROL Saturno Capper with 4 heads and vacuum - semi-new jaws in perfect condition - new vacuum pump and circuit  New wine inlet solenoid valve  Plug for feed pump  Machine newly refurbished (solenoid valve, jaws, vacuum turbine, gaskets, vacuum pump)  Electrical supply: 400 Volts / 50 Hz, 3 phases  Dimensions:  Long 380cm x Wide 140cm x High 250cm  Weight: 3500 kg    Godjuch Tmepfx Abrstu

Year of construction: 2012, condition: excellent (used), COLUMBUS Vacuform Standard High-performance vacuum pump BECKER Vacuum tank 200 l Digital pressure regulation Digital vacuum gauge Highly elastic natural rubber membrane Sturdy worktable Swivel castors with brakes Working dimensions approx. L x W 2900 x 1300 mm Pressing pressure max. 0.85 kg/cm2 = approx. 29 t Connected load 0.75 kW, 400 V 50 Hz Tank capacity 200 l CE Transport dimensions approx. L x W 3100 x 1550 mm Gsdpfsxgg Tbsx Abretu Weight approx. 400 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: C0610000102, Technical data 50 Hz Nominal pump speed m³/h 40 Ultimate pressure hPa (mbar) 120 Nominal motor power kW 1.25 Nominal speed min-1 1500 Voltage (1 phase)* V 220 – 240 Voltage (3 phase)* V 220-240 / 346-420 Sound level (ISO 2151) dB(A) 66 Gjdpfeyh Uwvjx Abrstu Protection class IP 55 Weight approx. 38 kg Dimensions L x W x H 546 x 289 x 246 mm Gas inlet / outlet G ¾”

Condition: ready for operation (used), Air distribution system, Air Center Elmo Rietschle – Used equipment Overall dimensions: Length: 1000 mm Width: 700 mm Height: 2170 mm Electrical data: 400V; 5.5 kW; 2900 RPM Vacuum pumps: Gardner Denver 2x Type: SAH 235 Pressure range: +650 to -470 mbar Gtsdpfx Abjw Au Twsrsu Max airflow: 240 m³/h

Condition: good (used), Manufacturer: ELMO RIETSCHLE / Garden Denver Type: G200 2BH1900 Overall size: 500 x 600 x 1100 mm Connecting pipe stub: DN100 Pmin: 280 mbar RPM: 2920/min Godpfxshwrucj Abrstu Electrical data: 50 Hz; 380 V; 12,5 kW; 28 A