Used Grain Drain for sale (1,480)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. Codpozti Tkefx Aktori This equipment has very few operating hours.

Condition: used, Year of construction: 2016, Overview Cjdpsz Sr H Nefx Aktori This Speidel Braumeister 200 L is a compact all-in-one brewhouse: mashing, lautering and wort boiling take place in a single vessel. The unit was bought new from Speidel in 2016 and has been used exclusively for craft ales (top fermentation), with about 280 brews. It was in production until August 2026 and is now dismantled and stored in a climate-controlled warehouse. The malt pipe sits inside the kettle; the recirculation pump drives the wort through the grain bed, and the integrated lifting device raises the malt pipe for lautering. The automatic controller runs the brewing programme. Technical data - Manufacturer: Speidel - Model: Braumeister 200 L - Year of manufacture: 2016 - Nominal brew volume: 200 L - Power supply: 400 V, three-phase, 50 Hz - Power: 9.3 kW; heating 3 x 3,000 W - Dimensions: approx. 136 x 90 x 208 cm including lifting device - Weight: approx. 150 kg - Control: automatic - Utilities: no cooling water and no permanent drain connection needed in normal operation Equipment - Stainless steel lid - Malt pipe with perforated filter plates, fixing bar and clamp - Lifting device for the malt pipe - Recirculation pump - Automatic controller - Hoses, external connections, cable and three-phase plug - Printed manual; invoice, CE certificates and original documentation available Condition Used, in excellent condition: no known faults, leaks or pending repairs. Pumps, heating elements, seals and controller are original. Maintained quarterly according to the manual; routine cleaning with warm water and alkaline detergent, with caustic soda and nitric acid every five brews. The unit sits on its own frame and can be loaded without a pallet. A second, identical unit is available as a separate offer. Availability Available immediately. Location: Spain. Viewing is possible by appointment.

Condition: used, Year of construction: 2016, Overview This Speidel Braumeister 200 L is a compact all-in-one brewhouse: mashing, lautering and wort boiling take place in a single vessel. The unit was bought new from Speidel in 2016 and has been used exclusively for craft ales (top fermentation), with about 280 brews. It was in production until August 2026 and is now dismantled and stored in a climate-controlled warehouse. The malt pipe sits inside the kettle; the recirculation pump drives the wort through the grain bed, and the integrated lifting device raises the malt pipe for lautering. The automatic controller runs the brewing programme. Technical data - Manufacturer: Speidel - Model: Braumeister 200 L - Year of manufacture: 2016 - Nominal brew volume: 200 L - Power supply: 400 V, three-phase, 50 Hz - Power: 9.3 kW; heating 3 x 3,000 W - Dimensions: approx. 136 x 90 x 208 cm including lifting device - Weight: approx. 150 kg Crjdpfx Ajz Sr Uyjktoi - Control: automatic - Utilities: no cooling water and no permanent drain connection needed in normal operation Equipment - Stainless steel lid - Malt pipe with perforated filter plates, fixing bar and clamp - Lifting device for the malt pipe - Recirculation pump - Automatic controller - Hoses, external connections, cable and three-phase plug - Printed manual; invoice, CE certificates and original documentation available Condition Used, in excellent condition: no known faults, leaks or pending repairs. Pumps, heating elements, seals and controller are original. Maintained quarterly according to the manual; routine cleaning with warm water and alkaline detergent, with caustic soda and nitric acid every five brews. The unit sits on its own frame and can be loaded without a pallet. A second, identical unit is available as a separate offer. Availability Available immediately. Location: Spain. Viewing is possible by appointment.

Condition: used, The Nagema FBFC/1 is a heavy-duty, industrial Continuous Butter Making Machine (CBM) engineered for the commercial dairy sector. Manufactured by the historic German engineering brand Nagema, this machine processes bulk cream into high-quality butter via a fully continuous automated cycle. A detailed technical breakdown of the machine's specifications and functional systems is outlined below. ----- Technical Specifications - Production Capacity: Up to 2,500 kg/h of finished butter output. - Raw Material Suitability:Sweet / Cultured Cream: 45% to 50% fat content. Cjdpfez S Ni Ujx Aktori - Sour Cream: 38% to 42% fat content. - Dimensions: Approx. 390 cm (Length) × 100 cm (Width) × 255 cm (Height). - Total Machine Weight: Approx. 3,100 kg. - Main Drive Motor (Beater): 22 kW to 30 kW operating at 650 to 1,950 rpm (manually adjustable via an external handwheel or modernized variable frequency inverter). - Auxiliary Drives:Auger feeder motor: 0.4 kW (925 rpm). - Raw material pump engine: 1.1 kW (2,760 rpm). - Water pump motor: 1.1 kW (2,760 rpm). - Integrated Centrifugal Pumps: 2x Nagema pumps with a maximum capacity of 13 m³/h. - Electrical Parameters: 380V / 50Hz, 3-phase power supply. ----- Structural Design & Materials - Hygienic Construction: All areas that come into contact with the product are made entirely of premium stainless chromium-nickel steel to satisfy strict food safety regulations. - Frame: Heavily reinforced painted steel, cladded completely with a stainless steel outer shell. - Controls: Simple, user-friendly control interface deployed directly on the machine body. Modernized variations often feature integrated variable frequency drives (VFD/Inverters) for smooth, digital speed management of the main churning drum. ----- Step-by-Step Functional Sections The FBFC/1 achieves continuous production by arranging its mechanical processes sequentially within its horizontal frame: [[1]()] - The Churning Cylinder (Beater): Cream is continuously pumped into the front end of a cooling-jacketed cylinder. Inside, the high-speed rotating beater strikes the cream forcefully. This mechanical action rapidly disrupts the fat globule membranes, reversing the emulsion to separate raw butter grains from liquid buttermilk. - Separation and Additional Churning: The resulting mix moves into a designated separation block. The buttermilk is systematically drained and collected by integrated centrifugal pumps, leaving behind a concentrated formation of pure butter granules. - The Kneading Zone: Dual counter-rotating augers push the raw butter grains forward. This mechanical kneading forces out remaining pockets of buttermilk moisture, tightly binds the butter matrix, and distributes water particles evenly. This process ensures the exact moisture profile (ranging from 16% to 25% based on settings) before the final product exits the machine. - Outfeed Distribution: The dense, finished butter is continuously extruded from the mouthpiece, frequently feeding directly into bulk packing systems or automatic wrapping machines. Technical Data & Specifications - Machine Type: Semi-automatic auger-fed system - Maximum Output: Up to 150 to 151 cartons per hour (depending on operator speed) - Product...

Condition: ready for operation (used), functionality: fully functional, A complete Bühler core wheat flour milling plant with a production capacity of 200 tonnes per day is offered for sale as a relocation project in Hungary. The mill remained in commercial production until 2025 and underwent a major refurbishment in 2020. The complete process line is available, including mechanical equipment, electrical systems, PLC automation and supporting steel structures. Includes the following: Wheat Cleaning Roller Mills Plansifters Purifiers Pneumatic Conveying Electrical Cabinets PLC Automation Motors & VFDs Steel Structures Process Piping Laboratory Equipment Dismantler capacity (Italpack) 3 t/hour Bagger capacity 12 t/hour DOCUMENTATION The offer includes the complete milling technology as shown on site, including all mechanical and electrical equipment, steel structures, piping and ancillary systems required for full operation. If this opportunity is of interest to your company, I would be pleased to provide: Complete equipment list Additional photographs and videos Technical documentation Csdpj Afmlxsfx Aktsri Commercial proposal Information regarding dismantling and export logistics

Year of construction: 2018, condition: used, The separator is from a well-known customer who has vacated the storage area where it was previously in use. With the installed screening discs, you achieve a grain size of 0-45/50 mm. Mixing in of additives is also possible in the same operation. The separator breaks up clods of soil and separates stones, roots, and branches from the reusable soil. When used as a feeder for a screening plant, performance increases by approximately 30% and waste/screen overflow is reduced by 60%, as the clods are already broken up. Other shafts can also be installed in the separator at any time. Conversion time: 40-60 min (patented shaft coupling) New prices: Mixing shafts M80X, grain size 0-60/80 mm: €10,567 Mixing shafts with block disc BS252, grain size 0-45/60 mm: €14,066 Used units, if available, correspondingly cheaper. An overflow plate is installed to prevent soil from spilling onto the wheel loader and to increase capacity by about 1/3. Included in the price is also the adapter for Volvo L50-120 type wheel loaders. Further technical information can be found in the datasheet in the images or on our website. Cjdpfx Asyf A Erektjri For wheel loaders from 15 t Weight (kg): 3450 Drain line required: 1 Series: TSP.263.001

Year of construction: 2024, condition: used, machine/vehicle number: TSC.153.042, Wolf Bucket Separator Terra-Star Compactline TSC.153 continually astonishes customers with its high throughput. The TSC.153 requires only 20 to 30 seconds for a capacity of 0.95 m³. With 50 fillings, this results in well over 45 m³ per hour. The ability to quickly and easily change the shafts makes the Terra-Star Compactline series unique in the market. The separator is equipped with screening shafts and star discs with a separation gap of 15mm – producing a grain size of 0-20/25 mm. Tools in the wear zones are armoured with hardfacing wire. Price without adapter For excavators from 11 t For wheel loaders from 8 t Csdpfew Rqz Esx Akteri Weight in kg: 1200 Throughput: 34 - 50 m³/h Drain line connection required: 2

Condition: new, Year of construction: 2022, functionality: fully functional, Extruder for protein, TVP, and high-moisture analogues. 110 kW. This equipment has never been used and is complete. Pre-conditioner Extruder Polycool 500 and one Polycool 1000 6 cooling and heating regulators, Thermoplas. Dosing system, Bühler (loose weight) for protein Stainless steel control panel Cedpfx Aszh I Dqektori Venting system for the extruder Dosing system for liquids (Netsch)

Condition: used, MANFACTURER - PRO-ECO TYPE - PRECISION DOUBLE LOOP SLITTING LINE MATERIAL - GRAIN ORIENTED, NON-GRAIN ORIENTED, SILICON STEEL, COLD ROLLED STEEL SHEAR STRESS - 100,000 PSI - SILICON STEEL | 60,000 COLD ROLLED STEEL MAX YIELD STRESS - 80,000 PSI MIN YIELD STRESS - 30,000 PSI MAX COIL WEIGHT - 50,000 LBS ENTRY/EXIT MAX COIL WIDTH - 48" NOMIMAL (50" MAXIMUM) ENTRY/EXIT MIN COIL WIDTH - 8" ENTRY / 1" EXIT MAX COIL OD - 72" ENTRY / EXIT MIN COIL OD - 36" ENTRY / EXIT MAX STRIP THICKNESS - 0.025" IN - SILICON STEEL / 0.050" CRS MIN STRIP THICKNESS - 0.010" MAX CUTS - 32 LINE SPEED - 1200 FPM ELECTRICAL - 575 V, 3 PH, 60 CYCLE AIR SUPPLY - 80 PSI LINE DIRECTION - LEFT TO RIGHT MODE OF OPERATION - FULL LOOP DRIVE-SLIT, DOUBLE LOOP LINE COMPONENTS: COIL CAR MANDREL UNCOILER PEELER TABLE ENTRY PIT Crsdpjzk Nitefx Aktji GUIDE TABLES INTERMEDIATE GUIDES FELT STAND BEFORE ENTRY SHEAR ENTRY SHEAR SIDE GUIDES SLITTING HEAD BUTECH SCRAP CHOPPERS EXIT TABLE PRESSURE & TENSION ROLL STAND EXIT SHEAR RECOILER WITH OVERARM SEPARATOR EXIT COIL CAR ALSO AVAILABLE: INTEGRATED PACKAGAING LINE, INCLUDING: EXIT TURNSTILE DOWNENDER WEIGHT SCALE UNDER SEMI-AUTOMATED BANDING LINE 5/8" STEEL BANDING PICK AND PLACE STACKER MAX CAPACITY 6000 LBS PER SLIT COIL ROTATING CAROUSEL EXIT CONVEYOR SEMI-AUTOMATIC STRETCH WRAPPING MACHINE WEIGHT STATION CONTROLS, HYDRAULICS AND ELECTRICS FOR LINE

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802030369, empty load weight: 31,110 kg, maximum load weight: 34,889 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 01/2027, total length: 7,390 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: red, # Fliegl Chemical Tank Container Chassis Please note: The images shown are archive photos. The vehicle may still be in operation. ## Chassis * High-strength fine-grain steel welded chassis * Fifth wheel with replaceable 2" kingpin * Container configuration: * 1 × centrally positioned 20 ft ISO tank container * Alternatively suitable for 7.15 m / 7.45 m swap bodies * Front container locks in fixed (non-recessed) position * Extended container locking twist locks * 24-tonne, two-speed landing gear with single-side operation, straight foot design, without load compensation * Wheel chocks with holders * Side underrun protection * Aluminium rear underrun protection * EC-compliant anti-spray mud flaps * Stainless steel spill containment tray with: * 1¼" drain pipe * 1¼" shut-off valve * Drip tray included * Perforated anti-slip walkways (approx. 400 mm wide) on both sides between spill tray and chassis rails * Hose storage system approx. 4,500 mm long (including hose compartment) for: * 2 × DN 200 hoses (outer positions) * 2 × DN 160 hoses (centre position) * Rear stainless steel hose box: * Approx. 300 mm deep * Splash-proof * Stainless steel lid with full rubber seal * Drain opening at the lowest point * Stainless steel grounding lug at the rear right-hand side of the chassis * International grounding identification label * Rear access steps on the right-hand side leading to the underrun protection * Additional anti-slip step on the right-hand main chassis rail (approx. 260 × 300 mm) ## Axles & Suspension * SAF disc brake axles * Laser wheel alignment for reduced tyre wear and fuel consumption * Offset axle spacing: 1,410 / 1,310 mm * Suitable for combined transport up to a gross combination weight of 44 tonnes * Air suspension * First axle with automatic lift axle * Automatic lowering function and traction aid * Lift axle activated by pressing the brake pedal three times * Traction aid operational up to 30% axle overload and speeds of up to 25 km/h ## Braking System * Dual-line compressed air braking system * Colour-coded air lines for simplified servicing * Spring parking brake * Non-interchangeable air couplings at the front (without connecting hoses) * Electronic Braking System (EBS) * Front EBS socket without connecting cable * Lift and lowering valve * Vehicle Stability Control System Crodpsy Tvphsfx Aktoi * Axle load monitoring via EBS CAN bus for display in the truck dashboard (truck preparation required) Note: The trailer may only be operated with towing vehicles capable of ensuring the correct functioning of the ABS system. ## Wheels & Tyres * 385/65 R22.5 tyres * Manufacturer's choice * Steel wheels, factory silver finish ## Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * Two white front position lights * Two red/white rear outline marker lights * 15-pin front connector (without connecting cable) # Approval & ADR Equipment * ECE R70 rear warning plate * ADR approval in accordance with ADR 9.1.1.2 * Approved for EX/II and EX/III vehicles * ADR vehicle approval certificate for the transport of certain dangerous goods (formerly B3) * Rear warning plate included * Not approved for UN 0331 and UN 0332 explosives (Class B-E) * Contour markings in accordance with ECE R048: * White reflective markings on the sides * Yellow reflective markings at the rear

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Crsdei Rixkjpfx Aktoi Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Year of construction: 2025, condition: used, Separator Terra-Star TSC.134 used, year of manufacture 2025 Maintenance-free, screening line 0–30/35 mm, star discs TA 15 mm Star discs are armored Application with screening shafts: Crodpfx Akoyf Atistoi Separation of stones, branches, roots, turf, debris, etc. from still usable waste soil. Works even with moist soil. Mixing in compost, sand, substrate, etc. in a single screening operation is easily possible. Screening of topsoil, construction debris, gravel. Backfilling of construction sites and pipe trenches, etc. Shafts for different grain sizes or tasks can also be installed—please ask us about this. Equipped with Likufix SW33 Price is without adapter plate Upon return from rental, the machine is inspected and comes with a 12-month warranty. For excavators from 12 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 50 m³/h Drain oil connection required: 2 Series: TSC.134.013

Year of construction: 2026, condition: like new (used), Disintegration, crushing, and mixing with grain size of 0-60/80 mm. For soil conditioning and mixing in lime, mixed binders, sand, compost, or other soils. Crushing and disintegration of soil clods, separation of stones, branches, roots, etc., with particle size 0-60/80 mm. Aerating, crushing, shredding, and turning of biomass, organic waste, and compost. Crodpsyf Autofx Aktji For applying lime, we also offer a binder dosing unit in the program, available with a weighing system. The separator comes from a short-term rental and shows minimal signs of use. Fitted with a Likufix SW48 adapter – can also be modified to suit your requirements. Price without adapter. Suitable for excavators from 16 t For wheel loaders from 8.5 t Throughput: up to approx. 65 m³/h Drain line connection required: 1 Series: TSC.154.342

Condition: refurbished (used), functionality: fully functional, Year of construction: 2019, working width: 1,500 mm, RUBERG RVS 150 MULTI Sieve – Factory Reconditioned, Unused, Immediately Available For sale is a RUBERG RVS 150 MULTI sieve from Gebr. Ruberg GmbH & Co. KG, in factory-reconditioned condition. The machine has been completely overhauled by Ruberg, fitted with a new nameplate, and classified as “like new.” Since the overhaul, the unit has not been operated and has been stored in a dry location. Technical data: Type RUBERG RVS 150 MULTI Sieve width 1,500 mm Total sieve area 36 m² Pre-sieve area 6 m² Grain sieve area 15 m² Sand sieve area 15 m² Design: MULTI design with multi-fraction sieving and recirculating air aspiration Csde Ahxzijpfx Aktjri Performance data: Wheat/Rye up to 150 t/h Barley up to 130 t/h Rapeseed up to 120 t/h Equipment: Recirculating air aspiration Multi-fraction sieving Roller sieves Grain sieves Sand sieves Pneumatic flap control Product sluice Dust separator Fan Additional interchangeable sieves Multi-product operation through flap switching Condition: Factory reconditioned by Ruberg New nameplate Not operated since reconditioning Dry storage in a hall Immediately available Suitable for: Grain cleaning Oilseed processing Rapeseed Seed processing Warehouses and silo operations Mills and processing plants Location: Germany Inspection possible by arrangement. Price: Negotiable Documentation for the reconditioning as well as technical documents are available. If you have any questions or require further information, please send us a message or call us.

Year of construction: 2020, condition: good (used), functionality: fully functional, For sale: Farmet FE1000 Clever Max industrial feed / soybean / grain extruder. Manufacturer: Farmet Model: FE1000 Clever Max Year: 2020 Main motor: 110 kW Throughput: approx. 900–2,100 kg/h depending on material and process setup Condition: used, fully functional Location: Slovakia, EU The extruder was used for approx. 2 years. Additional accessories were never used according to seller information. Included: Farmet FE1000 extruder Clever Max control system PLC control with HMI touchscreen Frequency converter for the main drive Stainless steel steam conditioner Cutting head Electrical control cabinet Accessories as shown in the photos Suitable for: soybean extrusion full-fat soybean processing cereal and grain extrusion oilseed meal / press cake processing compound feed production pet food and fish feed applications, depending on recipe and final line configuration The Clever Max control system allows better adjustment of extrusion parameters through PLC/HMI control and frequency regulation of the main drive. This is a strong industrial extruder suitable for medium-capacity feed and oilseed processing plants. Sold as shown in the photos. Inspection possible. Loading possible. Worldwide shipping on request. Price: FCA Slovakia, plus VAT. Cedpfx Akexfcwmetsri Zu verkaufen: Farmet FE1000 Clever Max Industrie-Extruder für Futtermittel, Soja, Getreide und Ölsaaten. Hersteller: Farmet Modell: FE1000 Clever Max Baujahr: 2020 Hauptmotor: 110 kW Leistung: ca. 900–2.100 kg/h, abhängig von Material und Prozess Zustand: gebraucht, voll funktionsfähig Standort: Slowakei, EU Der Extruder war ca. 2 Jahre in Betrieb. Weiteres Zubehör wurde laut Verkäuferangabe nicht benutzt. Ausstattung: Farmet FE1000 Extruder Clever Max Steuerung PLC-Steuerung mit HMI Touchscreen Frequenzumrichter für den Hauptantrieb Edelstahl-Dampfkonditionierer Schneidkopf Schaltschrank Zubehör wie auf den Fotos Geeignet für Sojaextrusion, Vollfettsoja, Getreide, Ölsaaten, Presskuchen, Mischfutter sowie Pet-Food- und Fischfutter-Anwendungen je nach Rezeptur und Linienkonfiguration. Besichtigung möglich. Verladung möglich. Versand auf Anfrage. Preis: FCA Slowakei, zzgl. MwSt.

Condition: like new (used), Year of construction: 2019, operating hours: 24 h, functionality: fully functional, type of input current: AC, working width: 1,500 mm, total width: 1,787 mm, total height: 1,953 mm, Equipment: compressor, Optical sorter with 5 different channels, sort by colours and size, for sorting grains, coffee, seeds, rice, nuts, plastic. Hi-resolution MultiVision inspection system - targets subtlest colour variations as well as light and dark colour defects Proprietary PROsize technology - sorts products and foreign material which are the same colour as the good product using size characteristics. Cedpfx Aewlk Ivoktjri Machine run time is only 24 hours, we buy the machine for a project that doesn't start, the machine is like new.

Year of construction: 1969, condition: used, Capacity: 1800kg/h, speed: 300rpm, weight: 3300kg. Inspection possible by arrangement. Csdpfx Ao Afza Dektori

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: 2031306, type of input current: three-phase, overall weight: 9,200 kg, Roller mill from Bühler, previously used in cornflakes production. Pre-installed are a metal detector and a vibratory channel. Control cabinet is included. Weight of the roller mill approx. 9,200 kg. Cjdsxgq Rkopfx Akteri

Year of construction: 2025, condition: refurbished (used), functionality: fully functional, Container conveyor scale, electronic, pneumatic, bulk material scale, 60 tons/hour. Calibratable, year of manufacture 2025 (all electrical and pneumatic components have been completely overhauled). For fine-grained bulk materials such as grain, high measuring accuracy. Ideal for goods receiving and loading. High throughput capacity, dust-proof frame construction. Purchased to replace a mechanical conveyor scale, but not installed due to the short-term shutdown of operations. Pre-hopper with level indicator also available. Crodpezy Rcyofx Aktji

Condition: refurbished (used), functionality: fully functional, power: 23.17 kW (31.50 HP), overall weight: 1,630 kg, fuel type: diesel, fuel: diesel, wheelbase: 1,680 mm, Year of construction: 2003, operating hours: 3,527 h, machine/vehicle number: 10309448, REFORM BOKI COMPACT EXCAVATOR 2551E – USED EQUIPMENT CHASSIS NO. 1039448, CURRENTLY WITH 3,527 OPERATING HOURS Completely Overhauled: - Thoroughly cleaned - Cabin repainted - Support feet repainted - New grapple shells - New service: oils, filters, etc. - UVV inspection passed Standard Equipment: - Handle-guided 3-wheel excavator - Sound-damped - Outside width adjustable from 0.83 to 1.25 m - Speed of 0-6 km/h adjustable purely mechanically on the drawbar - UVV approved - GS mark "tested safety" Engine: - with water-cooled 4-cylinder diesel engine - 23.2 kW / 31.5 HP at 3,000 rpm according to DIN 70020 - Displacement 1,335ccm Electrical System: - Alternator 14V / 35A - Battery 12V / 63 Ah - Work lights Drive System: - Hydrostatic all-wheel drive via wheel hub motors - BOKILOCK DIFFERENTIAL LOCK SYSTEM - Can be activated from the drawbar and switched during operation - Stepless adjustment of the driving speed on the drawbar 0-6 km/h - Mechanical starting protection on the drawbar - Sensored front axle for automatic activation of the boom safety function Chassis: - Torsionally stiff frame made of fine-grain steel Steering: - The spur gear is actuated via the steering drawbar Brake: - Service brake via the hydrostatic drive Tires: - 18 x 9.50 - 8 (lawn tread) Hydraulics: - 2-lever joystick control on adjustable control unit - No visual obstruction by control elements - Pre-set hydraulic valves - All functions controlled proportionally - Two-circuit hydraulics - Hydraulic tank: 40 l, operating pressure: 180 bar - Biologically rapidly biodegradable hydraulic fluid - Based on poly-alpha-olefins (PAO) - Currently 4,000 operating hours change interval - (Water hazard class 1) Swivel Mechanism: - Upper carriage rotates continuously on an internally toothed slewing ring - Locking by means of a pin in the cabin Excavator Superstructure: - Box-shaped boom and excavator arm made of hot-rolled MSH profiles - Outreach 3,750 mm from the outer edge of the base frame - Automatic detection of the operating status automatically activates the "boom lowering" function when the device is supported (this allows the pressure on the earth grab to be significantly increased in difficult ground conditions) - Lifting force: 830 kp at 3,000 mm - Load holding valve, pre-tension valve and hose rupture protection - 4 two-part, hydraulic supports, play-free horizontal locking by means of forged toothed discs (unlimited adjustment options) - Support cylinders with integrated hose rupture protection (no risk of collapse in the event of external damage to the hydraulic lines) - Support plates with 2 locking claws Grab Bucket: - Earth grab / two-shell grab with integrated, central closing cylinder, grab swivel device approx. 210° - Dimensions: 750 x 830 mm standard Half Cabin: - Fully closable with side window, optimal view of the work area due to glazing that extends to the floor - Windshield can be opened - Entrance-side curtain with window - Folding footrest - Weatherproof, suspended and hydraulically dampened driver's seat - Hot water blower heater Dimensions and Weight: - Length / transport position: 3,600 mm - Width: 830 mm - Height: 2,115 mm Crsdo Ahyf Uepfx Aktei - Track min: 830 mm - Track max: 1,250 mm - Weight: 1,630 kg - Wheelbase: 1,680 mm - Turning radius: 1,780 mm

Year of construction: 2022, condition: used, - Model: Classic Line 2 FE - Year of manufacture: 2022 - Load capacity: 800 kg - Collection capacity: 205 liters - Dimensions: 1,236 x 815 x 360 mm - With grating - Steel construction - Color: blue (powder-coated) - Weight: 64 kg Credpfozrvk Tex Aktei

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: Serial No.57/19, total length: 9,370 mm, total width: 2,900 mm, total height: 3,890 mm, overall weight: 4,490 kg, input current: 83 A, input frequency: 60 Hz, type of input current: AC, input voltage: 400 V, power: 50 kW (67.98 HP), workpiece weight (max.): 300 kg, We offer this used Neptun MASTER WAVE HP 2800 glass washing machine, manufactured in 2019. Wave HP 2862-80 HD Neptun’s heavy-duty vertical glass washer is designed for intensive use, with corrosion-resistant components and extensive use of AISI 304 stainless steel. It handles glass up to 80 mm thick and 300 kg per linear metre, including float, acid-edged, coloured, printed and pyrolytic glass. Inlet conveyor The 3,200 mm inlet conveyor has motorised rubber rollers, bevel-gear transmission and stainless-steel shafts. Sensors detect glass thickness and dimensions for PLC control. Its independent drive pauses incoming sheets during thickness changes until the machine is clear and adjusted. A foot pedal allows heavy sheets to be loaded while the conveyor is stopped and the rest of the machine continues running. Prewashing and washing Crjdpfx Akj Ah Hgzjtji A separate 400 mm prewashing module isolates prewash water from the main wash. Without a closed-circuit tank and pump, water consumption is 1,200–2,400 l/h. Three washing circuits use three pairs of 160 mm brushes with 0.30 mm bristles. High-density front brushes have inverter-controlled speed. Separate overhead motors drive front and rear brushes. Each circuit includes a 900 µm inlet filter, a 300 or 150 µm cartridge filter, a stainless-steel immersion pump and a drain valve. The first two circuits have independently controlled heating up to 50°C. A separate rinsing circuit sprays both glass faces. Water management Water flows from the final circuit towards the first tank. Specified water limits are conductivity below 150 µS, salts below 80 mg/l, chlorides below 30 mg/l, hardness below 6°f and no iron. Demineralisation is required where these limits are not met or for insulating-glass production. Programmable preheating and automatic tank draining/refilling prepare the machine for the next shift. Rinse-tank conductivity control regulates demineralised-water input. Flowmeters display circuit flow and trigger cleaning alarms for filters or nozzles. Drying and energy saving The sound-insulated drying section uses one set of air knives, automatically positioned to suit glass thickness. Belt transport avoids roller contact after rinsing. SmartSpeed sets separate speeds for washing/drying and final trailing-edge drying. Stated fixed-speed performance applies to glass up to 10 mm without holes or notches; thicker glass or glass with holes or notches may require slower drying. Ecosave® automatically reduces drying airflow and energy demand when glass is absent. The source quotes savings of up to 41%, with a separate Ecosave Full example claiming 60% under the specified glass-size and spacing conditions. If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2022, condition: used, - Model: Classic Line 60 KK - Year of manufacture: 2022 - Load capacity: 400 kg - Collection capacity: 65 liters - Dimensions: 785 x 639 x 281 mm Crodezrvkajpfx Aktsi - With grating - Steel construction - Color: blue (powder-coated) - Weight: 37 kg

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 01 Crumbler, type of input current: three-phase, year of last overhaul: 2026, working width: 1,800 mm, roller length: 1,400 mm, CPM PELLET 855 CRUMBLER Model 855 DA Crsdpfx Aksz Aryxstji Manufactured in 1988 Rated capacity of 20 tons per hour. Consisting of the following: 2 x 11 kW, 1800 RPM, 3-phase, 440V motors 8-inch diameter x 55-inch long chilled cast iron rolls.

Condition: excellent (used), Year of construction: 2005, 191 USED Ciabatta dough divider, square dough, complete with Lippelt grain sprinkling machine. EQUIPMENT: - guillotine, - pattern cutter, - container for various grains, - dough soaker. Crjdpfjxqy Uyjx Aktsi The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices