Used Grain Drain for sale (1,508)

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,620 kg, overall weight: 11,600 kg, axle configuration: 2 axles, loading space length: 5,120 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, side walls 600 mm high, galvanized, wide tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear side walls, side walls swing and fold down, side walls with spring relief, platform floor made of 4 mm fine-grain steel, 12 x strong lashing eyes recessed in the floor, tipping angle: 50 degrees to the rear and 45 degrees to the side, continuously height-adjustable drawbar, stakes pluggable at the rear, geared support winch with load and fast gear at the front, receiving shaft for two aluminum loading ramps integrated in the chassis, contour marking according to ECE R 048 regulation, , surcharge for aluminum ramps load capacity per pair 10 t and 2 x folding supports at the rear, ramps suitable for steel tracked vehicles and rubber tires, Price: 1,500 Euro, , -- Subject to printing errors, mistakes and changes, sample images --, more information at: !, more details: ! Hjdpfxszc U Srs Ahaofh

Condition: new, empty load weight: 2,950 kg, maximum load weight: 10,050 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,080 mm, loading space width: 2,420 mm, suspension: steel, tire size: 2, color: other, gearing type: other, front tire size: 2, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, central locking for side and rear drop sides, automatic rear panel opening when tipping backwards, side panels are pendulum-mounted and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grained steel, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the side, gearbox support winch with load and fast mode, at the front, contour marking according to ECE R 048 regulation. -- Subject to errors, changes and misprints, sample images -- For more data see: !, More details: ! Hfedpfjzc U Rzjx Ahaeh

Condition: new, empty load weight: 3,090 kg, maximum load weight: 8,510 kg, overall weight: 11,600 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way side tipper, drop sides 500 mm high, galvanized, width tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear drop sides, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 12 x strong lashing eyes recessed in the floor, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, rear stanchions pluggable, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, contour marking according to ECE R 048 regulation, , surcharge for aluminum ramps load capacity 10 t per pair and 2 x folding supports, rear, ramps suitable for steel track vehicles and rubber tyres, price: 1.500 Euro, , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Hfodjzc U Sfepfx Ahash

Condition: new, empty load weight: 3,490 kg, maximum load weight: 8,110 kg, overall weight: 11,600 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way side tipper, side walls 600 mm high, galvanized, + lattice extension 1,000 mm high, width tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear drop sides, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 12 x strong lashing eyes recessed in the floor, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, rear stanchions pluggable, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, contour marking according to ECE R 048 regulation, , surcharge for aluminum ramps load capacity 10 t per pair and 2 x folding supports, rear, ramps suitable for steel track vehicles and rubber tyres, price: 1.500 Euro, , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Hfjdpfezc U Sljx Ahash

Condition: new, empty load weight: 3,280 kg, maximum load weight: 8,620 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, loading space volume: 11 m³, suspension: steel, tire size: 245/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Hfjdpozc Uxljfx Ahaoh

Condition: ready for operation (used), Serfilco EO 1 1/4CL5-DM1.0-DPA-ST-SX with VEM K21R 80 K 2 DOD FDS-SR/5334 motor, height 370 mm + motor 235 mm, cover plate 355 x 250 mm, external Ø drain nozzle 59 mm, used, good condition, 100% functional Hodpsi D N Nhofx Ahajfh

Condition: excellent (used), CTS Climate Test Chamber C-70/600 Type: C-70/600 Manufacturer: CTS Klima Temperatur Systeme Design: Air-cooled For sale is a CTS climate test chamber for temperature and climate testing in industry, research, development, and quality assurance. Condition / Display: Used unit, optical condition see pictures. Display in manual mode / stop. Temperature actual value: 16.59 °C Temperature setpoint: 5.00 °C Humidity actual value: 39.7 % RH Water supply: 11.0 l Special feature: Extended temperature range up to +210 °C (many standard versions only up to +180 °C) Hfjdpoy I Tdxjfx Ahajh Technical data: Temperature range: -70 °C to +210 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Temperature change rate: approx. 2.5 K/min (heating/cooling) Test chamber volume: approx. 600 liters Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.0 kW Rated current: approx. 14.6 A Protection class: IP 22 Refrigeration system: Refrigerant: R452A / R23 Cascade refrigeration system for low temperatures down to -70 °C Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Test chamber: Internal dimensions: approx. 850 x 850 x 830 mm Dimensions: approx. 1900 x 1115 x 1850 mm Weight: approx. 800 kg (depending on equipment) Equipment: Observation window Stainless steel test chamber Digital setpoint/actual value display Test item protection / temperature limiter VE water connection Condensate drain Pipe penetrations RS232 interface Digital outputs for test item control Scope of supply: CTS climate test chamber C-70/600 Scope of supply as shown in the pictures Service / Preparation: Functional check and replacement of necessary components Refilling with legally compliant refrigerant (if required) Leak test with certificate Documented test run Other: Inspection possible by appointment Loading can be arranged Commercial sale – sale without warranty. (Subject to changes and errors)

Condition: excellent (used), CTS Climate Testing Chamber C-70/600 Equipment Data Manufacturer: CTS GmbH Type: C-70/600 Model: Climate Testing Chamber Cooling: Air-cooled Description Used climate testing chamber from CTS. Suitable for temperature and climate testing. Application in research, development, and quality assurance. Operating Condition Display: Manual operation / Stop. Temperature: 16.59 °C (Actual) / 5.00 °C (Set). Humidity: 39.7 % RH. Water supply: 11.0 l. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Refrigeration System Refrigerant: R404A / R23 Cascade refrigeration system Low-temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber Digital setpoint/actual value display Test specimen protection / Temperature limiter Water connection (demineralized water) Condensate drain Pipe penetrations RS232 interface Digital outputs Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1115 x 1850 mm Weight approx. 600 kg Scope of supply CTS climate testing chamber C-70/600 Documentation (if available) Service before delivery (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Condition: See images. Note Used equipment, sold without warranty. Inspection possible by arrangement. Hsdpfxsy H H D Ao Ahajfh Loading and transport can be arranged upon request. Subject to change and prior sale. If you have any questions, please contact us.

Condition: excellent (used), CTS Climate Testing Chamber C-70/600 Device Data Manufacturer: CTS GmbH Type: C-70/600 Design: Climate Testing Chamber Cooling: Air-cooled Description Used climate testing chamber from CTS. Suitable for temperature and climate testing. Application in industry, research, and quality assurance. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Refrigeration System Refrigerant: R404A / R23 Cascade refrigeration system Low-temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber Digital setpoint/actual value display Test item protection / Temperature limiter Water connection (demineralized water) Condensate drain Pipe penetrations RS232 interface Digital outputs Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1115 x 1850 mm Weight approx. 600 kg Scope of Supply CTS Climate Testing Chamber C-70/600 Hfjdey H Hl Hspfx Ahash Documentation (if available) Service prior to delivery (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Optical condition, see pictures. Note Used device, sold without warranty. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, rear stanchions can be plugged in, geared support winch with load and fast gear, front, mounting shaft for two aluminum drive-on ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , -- Misprints, errors and omissions excepted, sample images --, More data under: !, More Details: ! Hedozc Epnspfx Ahaefh

Condition: used, Year of construction: 2001, Manufacturer : Forberg Model : FT20 Year: 2001 Type: Paddle dryer Description: The product is dried by blowing hot air through the mechanically suspended (fluidised) product. The humid air and suspended particles rise towards the primary filter. A fan blows the humid air into a three-stage water-cooled coil cooler. The condensate from the dehumidified air is drained from beneath the chamber. An electric heater reheats the cold, dry air, and the air returns to the mixing chamber. Material : stainless steel Nominal capacity: 20 litres Mechanical mixing: two counter-rotating blade shafts Variable speed: yes (see control panel) Forced-air ventilation: 1 cold-air fan and 1 hot-air fan Cooling unit: tube heat exchanger, external source fluid connection, condensate drain. Heating system: 20 kW Temperature and humidity sensor Product sampling Infastaub AJN 024 air filter / dust collector: surface area 2 m² Hsdpfxszbypyj Ahajfh Cleaning filters with compressed air PLC + HMI: Siemens These options are available and are subject to an additional quote Lump breaker for wet granulation. Liquid spraying Dimension : 326 x 97 x 230 cm Operating manual and wiring diagrams Video available when powered on  

Condition: used, machine/vehicle number: 2020110210, mileage: 92,300 km, power: 100 kW (135.96 HP), first registration: 12/2011, fuel type: diesel, empty load weight: 3,065 kg, maximum load weight: 435 kg, overall weight: 3,500 kg, wheelbase: 3,665 mm, fuel: diesel, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, loading space length: 3,500 mm, loading space width: 2,250 mm, loading space height: 2,300 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), onboard computer, second-hand vehicle warranty, We offer you customized lightweight box bodies on new or used low-frame chassis in various body lengths. The body and interior are always customized to your individual needs, from function to design. We produce ourselves and in Germany. Our many years of experience and our wide-ranging service offer you a great deal of flexibility in the implementation of your idea. Every project has its own ID. VW Crafter 2.0l 2011 Euro5 3500Kg First registration 21.12.2011 Mileage 92.300 km Fuel Diesel kW/hp 100/136 Manual gearbox 6 gear ccm 1,968 cm³ Sales body is NEW, unused and with a large sales hatch across the entire width of the vehicle, 2-seater, driving license class B, rear running board, LED lights, reversing camera. Box body made of 25 mm GRP sandwich element Superlight with alcove. Rear door single-leaf 700 x 0 mm. Floor made of non-slip industrial floor panel R11. Exterior LED lighting in accordance with road traffic regulations and EU regulations. Interior dimensions WD 3800 x 2250 x 2300 mm Side flap WxH 3570 x 1480 mm Hfsdof D Rdtopfx Ahajh Permissible total weight 3,500 kg Unladen weight 3,065 kg Interior is NEW!!! Left side: Commercial refrigerator with glass door, convection cooling Underframe for table-top appliances with sliding door, gas hob-2 burners 8.5 kW gas griddle plate Glatt 8 kW gas double deep fryer 2 x 8L 12.5 kW electric bain marie 2 kW wall-mounted hood 2200 incl. extraction, grease drain tap, flame protection filter, heat protection wall and lighting Gas cylinder cabinet for 4 x 11 kg, pressure regulator, gas pipe and gas test certificate Right-hand side: Serving table with sliding doors and stainless steel worktop 900 serving station with hinged lid 254L double sink with shelf incl. fresh and waste water tank, boiler Chalkboard with wooden frame LED illuminated Further equipment: Shelf above the sales hatch, folding bag shelf at the sales opening. 2 LED panels on the ceiling and 3 dimmable LED spotlights above the sales counter. Plenty of storage space. Standard electrical installation 380 volt/16A, power socket in accordance with CEE standard, RCD, 16 ampere fuse with acceptance, 5 double sockets, hygiene package, fire protection package. Net price ¤ 63,920.00 plus 19% VAT Subject to errors and prior sale.

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic tailgate opening when tipping backwards, side boards with spring relief, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the sides, infinitely height-adjustable drawbar, removable stakes at the rear, gear support winch with load and quick mode, front-mounted, integrated compartment for two aluminum loading ramps in the chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- subject to printing errors, mistakes and changes, sample images --, More data under: !, More Details: ! Hfedpfxozcmv As Ahajh

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, rear stanchions can be plugged in, geared support winch with load and fast gear, front, mounting shaft for two aluminum drive-on ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , -- Misprints, errors and omissions excepted, sample images --, More data under: !, More Details: ! Hfedpfxszcmrwo Ahaoh

Condition: ready for operation (used), Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional Hfodpfev D Rg Djx Ahajh accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Hfsdst Tqy Ejpfx Ahajh Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, maximum load weight: 34,725 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-Axle HardoX Steel Tipper 50 cbm "X-Shape" First registration 10/2024 Mileage 47,509 km Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Unladen weight only 7,275 kg Z-chassis, cranked version Continuous 5 mm HardoX steel HB450 floor Front wall and side walls 4/3 mm HardoX steel HB450 Angled front wall, internal access 2-wing portal doors with pneumatic post-release 1 grain hatch in the right door leaf Reinforced rollover tarp, central locking HYVA tipping cylinder type Alpha, suitable for high and low pressure Full-load ALU landing legs 2x air vibrators below body SAF axles with large disc brakes, 430 mm 1st axle: lift axle with starting aid Hfedpfx Asyy Hakohajh WABCO trailer EBS with rollover stability support (RSS) WABCO Smartboard Automatic tipping lowering Lifting and lowering mechanism Tires: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminum folding ladder Holder for shovel and broom Toolbox on the right 4x LED reversing lights RENTING is the new BUYING – also available for immediate delivery as FULL-SERVICE RENTAL.

Condition: used, maximum load weight: 31,240 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2023, next inspection (TÜV): 03/2027, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2023, Equipment: ABS, LANGENDORF/ FTS 3-Axle Aluminium Tipper "Combiliner" Hfsdpfx Ahjy Iq Injaeh First registration 03/2023, single owner Mileage only 114,761 km The transport solution for intermodal haulage of both liquid and solid goods without conversion. The module can be removed at any time. System advantages: Avoids empty runs through swap operations. For seasonal transports, can be converted to a pure tipper for higher payload. Economical and ecological benefits. Module installed in the tailgate, tipper usable without restrictions. Rinse function. The vehicle complies with QS and GMP+ guidelines, certified by TÜV Süd. Unladen weight approx.: 7,760 kg Tipper volume 47.5 cbm Slurry bag volume 26.5 cbm Pneumatic vibrator Grain outlet in the floor, grain channel with dust protection sack Aluminium water tank 50 L with compressed air connection, hose reel, and shower head (as required by QS and GMP) SAF axles in reinforced "CD" version, with large disc brakes, 430 mm 1st axle LIFT AXLE WABCO Trailer EBS with rollover stability support (RSS) WABCO Optiturn for reduced turning radius WABCO Smartboard with axle load display Six 385/65 R 22.5 tyres SPEEDLINE high-gloss aluminium rims FTS Combiliner module equipment: Vogelsang rotary lobe pump GL 186-184Q, weight-optimised Spade slide valves 4-inch and 6-inch Operation via remote control and programmable sequences Manual control unit on top for all hydraulic functions 2-tank venting/degassing and overflow Rinse function via two flange connections (left/right rinsing) Rinse baffles in the wire baskets Electric motor-driven winding reel with hydraulic brake RENTING is the new BUYING—immediately available from us, also as a FULL-SERVICE RENTAL-----

Condition: used, maximum load weight: 34,900 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2021, next inspection (TÜV): 10/2026, loading space length: 10,000 mm, loading space width: 2,400 mm, loading space height: 2,280 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,861 mm, Year of construction: 2021, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 55 cbm "AGRAR-LINER" First registration 04/2021 Mileage 203,910 km Internal dimensions (LxWxH): 10,000 x 2,350 / 2,450 x 2,280 mm (conical body design) Unladen weight only 7,100 kg Z-chassis, cranked design Floor made completely of 3 mm Hardox steel HB450 Front wall and side walls 3 mm Hardox steel HB450 Inclined front wall, interior access Single-leaf aluminum combination door with swinging function, pneumatic rear unlocking 1 grain discharge slide Reinforced roof roll tarp HYVA tipping cylinder, Alpha type, suitable for both high and low pressure Full-load aluminum landing legs 2x pneumatic vibrators below the body Hedjy Nvrzopfx Ahajfh SAF axles with large disc brakes, 430 mm First axle is a lift axle WABCO trailer EBS with roll stability support (RSS) WABCO Smartboard Raise and lower device Tyres: 385/65 R 22.5 Aluminum access ladder Shovel and broom holder Toolbox on right side 4x LED reversing lights RENTING is the new BUYING – immediate availability also on full-service rental with us-----

Condition: used, maximum load weight: 34,130 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 10,149 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,822 mm, Year of construction: 2024, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 55 cbm "X-Shape" First registration: 10/2024, condition: like NEW Mileage: 62,270 km Dimensions inside (LxWxH): 10,149 x 2,350 / 2,450 x 2,285 mm (conical design in width) Unladen weight: only 7,820 kg Z-chassis, cranked version Floor made entirely of 5 mm Hardox steel HB450 Front wall and side walls: 4 / 3 mm Hardox steel HB450 Sloped front wall, interior access ladder 2-wing rear portal doors with pneumatic remote unlocking GRAIN SLIDE with dust protection bag Reinforced roll-over tarpaulin HYVA tipping cylinder, type Alpha, suitable for high and low pressure Crank landing legs, rated for full load 2x pneumatic vibrators under the body SAF axles with large 430 mm disc brakes 1st axle is a LIFT AXLE with starting aid WABCO trailer EBS with RSS roll stability control WABCO Smartboard Automatic tipping lowering system Hydraulic lift and lowering device Tyres: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium wheels Aluminium access ladder Shovel and broom holder Hfedpfjyl Tfvjx Ahaoh Right-hand toolbox 4x LED reverse lights RENTING is the new BUYING – also available from us as a FULL-SERVICE RENTAL, immediately available-----

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Hedpfevf E Avjx Ahaofh Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: new, empty load weight: 3,280 kg, maximum load weight: 7,220 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, loading space volume: 11 m³, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall – foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bed made of fine-grain steel 4 mm, 8 x heavy-duty lashing eyes recessed in the floor, 5-stage, hard-chrome-plated three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the side, continuously adjustable drawbar, rear posts can be inserted, geared support winch with load and fast gear, front, integrated receiving shaft for two aluminum access ramps in the chassis, lockable ramp shaft (visual protection), contour marking according to ECE R 048 regulation, -- printing errors, errors and changes excepted, sample images --, more data under: !, More Details: ! Hfsdszb Di Rspfx Ahaoh

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19.7 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 12,855 kg, empty load weight: 2,145 kg, loading space volume: 17.3 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 1,250 mm, Price available upon request. The price is valid ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible by arrangement. Leasing/hire purchase possible! 2 units available on short notice, other RAL colors available upon request. Technical description: • Internal dimensions: 6000 x 2300 x 1250 mm (internal length) • Usable volume: 17.3 cubic meters • Tare weight: 2145 kg • Floor: 5 mm S 235 • Side walls: 3 mm S 235 • All sheets and profiles continuously welded • Double-leaf door with safety lock • Container tested and approved according to DGUV Rule 114-010 • Warning markings according to DIN 67520 • Standard ladder, screwed on, galvanized • Floor-side wall connection 45° • Hook diameter 50 mm, S 355 • Hook height 1570 mm • Top frame, round tube Ø89 x 6.3 mm • Mesh hooks • All moving parts greaseable • Steel drain rollers 159 x 6.3, length 300 mm Hsdpfszbtncjx Ahaofh • Interior and exterior zinc phosphate primer, exterior painted with synthetic resin paint (80-100 μ) • Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price is per unit, including 19% VAT.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 1,238 kg, empty load weight: 2,652 kg, loading space volume: 29.9 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 2,165 mm, Price upon request. The price is valid ex warehouse, 33106 Paderborn! Quantity discounts are possible when purchasing multiple containers. Europe-wide delivery is possible upon agreement. *Leasing/hire purchase possible!* 1 unit available directly in the warehouse, RAL 7043 3 units available in the short term, other RAL colors available on request Other designs and sizes are available from the Paderborn warehouse. You can view our warehouse stock on our website. Hfodpfx Aozbtmrohajh Roll-off container according to DIN Technical description: * Internal dimensions: 6000 x 2300 x 2165 mm * Usable volume: 29.9 cbm * Tare weight: 2652 kg * Floor 5 mm S 235 * Side walls 3 mm S 235 * Without crossbars, 1 longitudinal brace (belly band) * All sheets and profiles continuously welded * Double-wing door with safety lock * Container tested and approved according to DGUV Rule 114-010 * Standard ladder, screwed on, galvanized * Floor-side wall connection 45° * Hook diameter 50 mm, S 355 * Hook height 1570 mm * Upper frame square tube 100x100x5 mm * Mesh hook * All moving parts can be lubricated * Steel drain rollers 159 x 6.3, length 300 mm * Inside and outside zinc phosphate primer, outside coated with synthetic resin paint (80-100 μ) * Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. For further questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19.7 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,055 kg, empty load weight: 1,945 kg, loading space volume: 10.4 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 750 mm, Price available upon request. The price applies ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible by arrangement. *Leasing/hire purchase possible!* 4 units available directly in the warehouse, RAL 7043 4 units available in the short term, other RAL colors available on request Other designs and sizes available from the Paderborn warehouse. You can view our warehouse stock on our website. Roll-off container according to DIN Technical description: •Internal dimensions: 6000 x 2300 x 750 mm •Usable volume: 10.4 cbm •Empty weight: 1945 kg •Floor 5 mm S235 •Side walls 3 mm S235 •End wall sloping upwards •All sheets and profiles continuously welded •Double-wing door with safety lock •Standard ladder according to UVV, screwed on, galvanized •Container tested and approved according to DGUV rule 114-010 •Floor-side wall connection 90° •Stringers made of U 90x55x4 mm •Stringer spacing 750mm •Hook diameter 50 mm, S355 •Hook height 1570 mm •Upper frame round tube Ø 89×6.3 mm •Net hooks •All moving parts lubricatable •Steel drain rollers 159×6.3, length 300 mm •Warning markings according to DIN 67520 •Inside and outside zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) •Permissible total weight 15,000 kg Errors and prior sale reserved. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. If you have any questions, please send us a message or call us. Hfsdpfezbtl Iex Ahaoh