Weiss SD 1400/+20 DU climate test chamber with seat pulsator, 20 - 100 °C heating chamber, humidity

Weiss SD 1400/+20 DU

Weiss climate testing chamber with seat pulsator

Manufacturer: Weiss

Type: SD 1400/+20 DU

Test chamber:

Material: Stainless steel

Dimensions:

Height approx. 800 mm
Width approx. 2000 mm
Depth approx. 900 mm

Volume: 1440 liters

Outer housing

Material: Double-coated Zincor sheet

Dimensions:

Height approx. 2000 mm
Width approx. 2200 mm
Depth approx. 2000 mm

H x W x D 2000 x 2200 x 2000 mm

Paint finish: Light grey (RAL 9002)

Door, double-leaf: Hinged on the left and right

Equipment:

Pass-through in the floor and ceiling: 2 each, DN 100 mm, for inserting the pulsation tables
Pass-through in the side walls: 1 each, left, right, 100 mm

Refrigeration unit: Air-cooled

Crsdpfexbgrgex Acpeh
Control: Digital measurement and control system DMR

Basic control panel: Integrated into the main switch panel

Interface: RS 232 C, for connection to a PC

Software: Operating software for MS-Windows

Performance data:

Temperature range without climate control: +20...+100 °C

Temperature stability without climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state

Temperature range with climate control: 20...+95 °C

Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state

Dew point range: 20...+94 °C

Humidity range: 10...98 % RH

Humidity stability: +3 ... +5 % RH, depending on the range, in the steady state

Temperature change rate measured in the outlet without a test specimen and without a load
- Cooling: 0.5 K/min. on average, between +100 and +20 °C
- Heating: 0.5 K/min. on average, between +20 and +100 °C

The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage
For trouble-free operation of the system, the ambient temperature must be between +10 and +35 °C

Connections / Other

Protection class: IP 32 for the control cabinet

Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A)

Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic topping up

Condensate drain: back-pressure-free, 3/4" hose connection

Power connection: 400 V; 3 PH+N PE; 50 Hz

Connected load: max. 10 KVA

Weight: approx. 1160 kg

Seat testing device with steel structure for mounting and securing to the climate testing chamber, including:

• 2 pneumatic weight lifting devices (150 mm stroke) for test specimen change, 12 weights each weighing 5 kg
• 1 base frame in normal steel welded construction for attachment to the underside of the climate testing chamber. This frame is provided on all sides with removable sheets and has 2 folding doors for adjusting the eccentricity. These doors have safety switches.
• 2 eccentric disks with bearings and tachometer, 2 connecting rods, 2 ball guides
• 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm
• 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttocks replica
• 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered subsequently after a precise definition)
• 2 three-phase motors, 2 belt drives with tensioning devices
• 1 pneumatic control system with 2 manual valves, one filter-regulator unit and one shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons,

The listing was translated automatically. Translation errors are possible.