Used Seedbed Combination for sale (4,135)

Condition: used, functionality: fully functional, Year of construction: 1991, operating hours: 4,950 h, power: 139.74 kW (189.99 HP), color: green, total height: 4,089 mm, total length: 9,728 mm, total width: 4,572 mm, 1991 | John Deere 9500 | Used Combine Harvester | 4,950 hours Location: Michigan, United States Shipping available to your destination. Shipping rates can be calculated instantly. Fgodpfxsz Ebxye Ab Njh About this machine: John Deere combine harvester with a 190 hp diesel engine, 7,164 L grain tank, 17 ft unloading auger, straw chopper, and chaff spreader. Equipped with PRWD, 30.5-32 and 18.4-26 tires, and factory grain bin extension. ✔ PRWD ✔ 30.5-32 tires ✔ 18.4-26 tires ✔ 17 ft unloading auger ✔ Factory grain bin extension ✔ Straw chopper ✔ Chaff spreader ✔ 2 WD live front axle ✔ Conventional walker configuration ✔ Rasp bar cylinder Key specs: Engine power: 190 hp Engine hours: 4,950 hr Operating weight: 9,190 kg (20,260.5 lb) Grain tank capacity: 7,164 L (203.3 bu) Unloading rate: 2.6 bu/sec (90.4 L/sec) Unloading auger length: 17 ft (5.2 m) Fuel tank: 530 L Engine displacement: 7.6 L Combine type: Corn/Bean, Walker (conventional) Dimensions (L × W × H): 9,728 × 4,572 × 4,089 mm What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support ✔ Secure transaction on every purchase

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Fgsdpoz D Ihfofx Ab Njh

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 3,109 h, power: 372.9 kW (507.00 HP), total height: 4,830 mm, total length: 10,110 mm, total width: 4,170 mm, 2014 | John Deere S680 | Used Combine Harvester | 3,109 hours Location: Illinois, United States Shipping available to your destination. Shipping rates can be calculated instantly. About this machine: Rotary combine harvester with a 507 hp diesel engine, 14,100 L grain tank, 26 ft unloading auger, Pro-Drive transmission, and Sidehill Performance Package. Equipped with a premium cab, 650/85R38 duals, 28LR26 rear tires, factory manual-fold grain bin extension, and GS3 7" touchscreen. ✔ Premium cab ✔ Pro-Drive transmission ✔ 5-speed feederhouse ✔ 650/85R38 duals ✔ 28LR26 rear tires ✔ 2WD ✔ Factory manual-fold grain bin extension ✔ 26 ft unloading auger ✔ Chopper with manual tailboard ✔ HID lights ✔ Round bar concaves ✔ Deep tooth chaffer ✔ GS3 7" touchscreen ✔ Sidehill Performance Package Fsdpfxsz Elm Uj Ab Nogh Key specs: Engine power: 507 hp (rated: 473 hp) Engine hours: 3,109 hr Operating weight: 20,750 kg (45,746 lb) Grain tank capacity: 14,100 L (400.1 bu) Unloading rate: 135 L/sec (3.8 bu/sec) Unloading auger length: 6.9 m (22.6 ft) Fuel tank: 1,250 L Engine displacement: 13.5 L Emission standard: Interim Tier 4 Separator type: Rotary Total cleaning area: 5.6 m² Chaffer area: 2.5 m² What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support ✔ Secure transaction on every purchase

Condition: good (used), functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 630 mm, number of blades: 4, actuation type: electric, total length of planing tables: 2,100 mm, total width: 900 mm, total height: 850 mm, overall weight: 900 kg, Jointer-planer from the company Kölle, max. planing width 600 mm, max. thicknessing height 250 mm, height-adjustable rollers in the lower table for wet wood. Fgodpfez N T Hfjx Ab Njh

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 4,260 h, power: 248.6 kW (338.00 HP), color: green, total height: 4,500 mm, total length: 8,500 mm, total width: 3,700 mm, 2011 | John Deere 9670 STS | Used Combine Harvester | 4,260 hours Location: Michigan, United States Shipping available to your destination. Shipping rates can be calculated instantly. About this machine: Rotary combine harvester with a 338 hp diesel engine, 10,572 L grain tank, 22.5 ft unloading auger, extended wear round bar concaves, extended separator package, and Sidehill Performance Package. Equipped with duals and a high-torque variable-speed feederhouse drive. ✔ 2WD ✔ 520/85R38 duals ✔ 18.4 x 30 tires ✔ High-torque variable-speed feederhouse drive ✔ Extended wear round bar concaves ✔ Extended separator package ✔ Deep tooth adjustment Fgodpfx Aboz Ekpzs Neh ✔ 22.5 ft unloading auger ✔ Sidehill Performance Package ✔ Chopper ✔ Duals Key specs: Engine power: 338 hp Engine hours: 4,260 hr Operating weight: 14,815 kg (32,661.5 lb) Grain tank capacity: 10,572 L (300 bu) Unloading rate: 116 L/sec (3.3 bu/sec) Unloading auger length: 6.9 m (22.5 ft) Fuel tank: 946 L Engine displacement: 9.0 L Emission standard: Tier 3 Combine type: Corn/Bean Separator type: Rotary Chaffer area: 1.9 m² Sieve area: 1.6 m² What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support ✔ Secure transaction on every purchase

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent Fsdpfjz Hngmex Ab Nsgh • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 510 mm, number of blades: 4, overall weight: 430 kg, extraction nozzle diameter: 120 mm, For sale is a used FELDER AD 7-51 surface and thickness planer, manufactured in 1998. This machine impresses with its robust cast iron construction, high precision, and the typical Felder durability. With a planing width of 510 mm, the AD 7-51 is ideal for carpentry workshops, joineries, furniture manufacturing, and professional interior design. The machine is in used condition and offers a powerful combination of surface and thickness planing for daily workshop use. Equipment: • Surface and thickness planer in one machine • Robust industrial design • Precise cast iron guide tables • Self-adjusting planer knives • Powerful 4 kW drive • Proven Felder quality machine • Ideal for solid wood and furniture construction • Thicknessing unit with central, electric height adjustment • Feed rate for thicknessing: 6 m/min and 12 m/min • Thicknessing capacity: 4-220 mm • Massive cast iron surface planing tables for vibration-free operation • Planer shaft with 4 system planer knives • Surface planing table length: approx. 2,050 mm Fsdpfezwnmqsx Ab Nsgh

Condition: used, Year of construction: 2019, overall weight: 1,047 kg, Combined Surfacing and Thicknessing Planer Manufacturer: SCM GROUP spa Model: SCM Type: L Invincible FS7 Year of Manufacture: 2019 Weight: 1,047 kg Usable Working Width: 520 mm Total Table Length: 2310 mm Cutterhead Diameter: 120 mm Fgodpsz Iqqkjfx Ab Neh Planerhead Speed: 5000 rpm 4 Knives: 35 x 3 x 520 mm Aluminum Surfacing Fence: 1200 x 190 mm Surfacing Fence Angle Adjustment: from 90° to -45° Min./max. Planing Height: 3 / 250 mm Feed Rate (Thicknessing): 5 - 8 - 12 - 18 m/min Dust Extraction Port Diameter (Surfacing): 120 mm Dust Extraction Port Diameter (Thicknessing): 120 mm Purchase Price (Net): €15,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment text or equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible Upon request, we can arrange suitable financing through our company. Please feel free to contact us. Subject to changes, errors and prior sale. Sale is made without guarantee or warranty and only to commercial customers. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Format panel saw, milling machine, combination machine, table saw, circular saw, joiner’s circular saw, format saw, panel saw, table milling machine, tilting spindle milling machine FELDER Type: KF7 Year of manufacture: 1996 Format sliding table 300 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Parallel fence with fine adjustment up to approx. 125 cm Extension table with telescopic extension arm Rip fence extendable up to approx. 320 cm, adjustable for miter cuts with degree scale system Parallelogram protective device with upper extraction hood Motor power saw motor 3 KW Tilting spindle milling machine Manual height adjustment of the tilting spindle Manual tilting of the milling spindle up to 45° backwards Milling spindle diameter 30 mm 3 speeds adjustable via belt Milling spindle can be lowered and removed under the table Motor power milling unit 3 KW Milling fence with fine adjustment Fjdjz Eft Iepfx Ab Nogh Folding device for feed A prior inspection is highly recommended; simply leave your phone number in an email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The offered item is offered with differential taxation. The stated selling price is the gross final price. An invoice with VAT breakdown will not be issued. You will receive an invoice in accordance with §25 UStG. Warranty basis: Due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 1 X Sparc Systems 8-lane linear weighing combination system. Technical specification⚙️ ✅ Manufacturer - Sparc Systems Ltd. Fsdpfxexd Thme Ab Nogh ✅ Model - LCWS. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Seller has a quote for service and getting production-ready at cost of £12-15k per unit.

Condition: excellent (used), SCM minimax thickness planer Planing width: 400mm, Motor: 5 KW, 3 planer blades, 1 feed speed for the thickness planer, Manual adjustment of the thickness planer table, Maximum planing thickness on the thickness planer: 230mm, Planer bed length: 180cm, Planer fence adjustable to an angle, Very good condition. Fedsz Izcdopfx Ab Negh

Condition: good (used), Year of construction: 2002, For sale is a used Holzprofi circular saw and milling machine with a cutting length of 2500 mm. The machine has been inspected and refurbished by our service team and is in good condition. Technical specifications: - Cutting length 2500 mm - Cutting width 1200 mm Fgjdpfx Abez Apgio Neh - Cutting height 90 mm - 3 milling speeds - Height-adjustable + swiveling - Dust extraction port Ø 100/80 mm - 2 motors, each 4.4 kW / 6 HP - Year of manufacture 2002 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, combination machine Reference: R-J047R

Condition: used, Year of construction: 1997, operating hours: 500 h, functionality: fully functional, machine/vehicle number: Typ 250 R.B.S.EH, total width: 1,300 mm, total length: 3,200 mm, total height: 1,400 mm, trimming length: 2,960 mm, overall weight: 2,500 kg, table length: 25,002,920 mm, table width: 920 mm, table height: 900 mm, STEKO 250 master press, long belt grinder, veneer saw Cutting length 2970. Press 2500 x 1100, 920 for push-through operation Grinding table 2500 x 930 Includes existing grinding belts. Fgsdpez Ecfhsfx Ab Noh

Condition: excellent (used), Combination unit: Smoking (hot smoking, cold smoking), heating, cooking, baking, drying. Automatic operation Core temperature measurement and control Fgodez N Irvopfx Ab Noh Cart included Fully functional Test run possible at any time

Condition: like new (used), Year of construction: 2008, functionality: fully functional, planing width: 530 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,800 rpm, total length of planing tables: 2,300 mm, total width: 1,000 mm, total height: 920 mm, overall weight: 750 kg, Equipment: CE marking, KNAPP AD 530 SUPER Planer-Thicknesser | 530 mm | TERSA Shaft | Electric Table Lift | Year 2008, Planer-Jointer! Professional KNAPP AD 530 planer-thicknesser, manufactured in Austria. This is a high-class industrial machine designed for intensive use in woodworking shops, furniture production, and the manufacture of window and door frames. The AD 530 model stands out with its robust construction, 530 mm working width, long cast iron tables, and a modern TERSA shaft, enabling quick knife changes without adjustment. An additional advantage is the electric table lift on the thicknesser, which provides convenient and very precise adjustment of the working height. Key advantages: - Austrian KNAPP production - Year of manufacture: 2008 - Working width: 530 mm - TERSA MONOBLOCK planing shaft with 4 knives - Quick knife change without adjustment - Electric thicknesser table lift - Automatic opening of the planer tables - Long cast iron work tables - Robust construction with a weight of 750 kg - Industrial quality construction TECHNICAL PARAMETERS: - Manufacturer: KNAPP Produktion GmbH - Model: AD 530 SUPER - Year of manufacture: 2008 - Country of manufacture: Austria - Working width: 530 mm - Length of planer tables: 2300 mm - Shaft diameter: 120 mm - Shaft type: TERSA MONOBLOCK - Number of knives: 4 - TERSA knife dimensions: 530 × 35 × 3 mm - Shaft speed: 4800 rpm - Maximum planing height: 250 mm - Minimum planing height: 3 mm - Maximum material removal: 8 mm - Feed speeds: 7 / 11 / 15 / 19 m/min - Tilting fence 90°–45° - Thicknesser table dimensions: 530 × 930 mm - Motor power: 5.5 kW - Power supply: 400 V - Machine weight: 750 kg - Machine dimensions: 2300 × 920 × 1000 mm Equipment: - TERSA MONOBLOCK shaft with 4 knives - Automatic opening of the planer tables - Electric thicknesser table lift Application: Fgjdpfx Abozxxqvs Njh The machine is perfect for: - furniture production, - carpentry, - companies producing stairs, - production of windows and doors, - processing of solid wood, - professional woodworking workshops. The machine is in very good technical condition. A solid construction ensures high operational smoothness, great cutting accuracy, and years of trouble-free operation. PRICE VAT MARGIN BRUTTO OR VAT23% INVOICE WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: used, Year of construction: 2000, functionality: fully functional, cutting height (max.): 96 mm, saw blade diameter: 300 mm, planing width: 300 mm, input voltage: 400 V, power: 3 kW (4.08 HP), input frequency: 50 Hz, sliding table length: 2,250 mm, The used SAMCO CU 300K is a versatile combination woodworking machine designed for professional applications. It integrates multiple machining functions in a single unit and is ideal for workshops with limited space. Despite its year of manufacture, it offers robust construction and reliable performance for daily operations. Machine equipment Fodeyyltiepfx Ab Negh Circular saw unit Surface planer Thickness planer Milling unit Further technical data Maximum thickness planing height: 230 mm

Condition: excellent (used), Year of construction: 1999, operating hours: 650 h, functionality: fully functional, power: 4 kW (5.44 HP), Well-maintained, lightly used, powerful professional machine with 5 combined functions. Numerous accessories included. Features a circular saw and table router with sliding table, jointer and thickness planer, as well as a mortise drilling unit. 360 V Fgjdpfx Ajzn I Aaeb Nsh The machine is available for sale immediately. It is located in a ground-level basement in 23858 Reinfeld. Transportation is the responsibility of the buyer.

Condition: used, Combination jointer-planer machine Manufacturer: SCM LINVINCIBLE Type: 2200 Planing width: 50 cm Feed height: 20 cm 3-knife cutterhead 2 feed speeds Adjustable jointer fence Adjustable sliding rollers in the planer table Condition: see images, or refer to the item description. Parts can also be picked up on site. All dimensions are approximate. All information is provided to the best of our knowledge but without warranty. Subject to prior sale. Shipping costs are an estimate; they may vary depending on the distance and unloading possibilities. The items can be picked up on site or shipped at the buyer's expense. The stated selling price is a net amount plus VAT. An invoice with VAT breakdown is included with the goods. Warranty basis: Due to wear and tear on used parts, the items are generally sold as defective – for spare parts – only to commercial businesses. By submitting his bid, the buyer accepts this as the basis of the purchase contract. If the offered item is a used item, the warranty is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty is 12 months. Fgsdpfez Ef Ifox Ab Noh

Condition: good (used), Code: 0486 Brand: SCM MINIMAX Model: CU 410 CLASSIC - CE Standard Universal professional high quality 6-works combined machine for joinery, production of furniture, custom furniture, panels, doors, window frames and various - CE Standard Technical data: Sturdy construction: the base consists of a single, fully welded steel monoblock Surface Planer: Max working width mm 410 Length of cast iron worktables mm 1800 Tiltable surface fence 90-45° Planer spindle rotation speed rpm 5200 Max removal at planer mm 4 Thickness planer: Thickness table size mm 605 x 410 Feed speed at thickness mt/min 7 Min/max working height on thicknesser mm 3/230 Circular saw: Squaring carriage length mm 2250 Squaring frame Blade inclination 90-45 degrees Max diameter of saw blade with installed scoring unit mm 315 Max saw blade projection mm 100 Scoring unit blade unit diameter mm 80 Cutting width at parallel fence mm 1050 Telescopic guide with 2 squaring stops Spindle moulder: Spindle diameter mm 30 Max spindle length mm 100 Spindle rotation speed rpm 1400/3500/6000/8000 Max tool diameter mm 210 Mortiser: Fgsdpfx Absz E Sguo Noh Cast iron mortiser with spindle diameter 16 mm Work surface dimensions 470 x 220 mm Workpiece clamping press N° 3 Three-phase motors Hp 5,5 Suction connections N° 3 ports diameter mm 120 Overall dimensions of assembled machine mm 2500 x 2800 x 1200 h Overall dimensions for transport mm 2500 x 1600 x 1200 h Weight kg 630

Condition: good (used), Bernardo 320 multi-function machine: saw, planer, router – 5-in-1 Planer: width 32 cm, max height approx. 220 mm, 3 knives, 1 feed speed, Jointer: width 31 cm, table length approx. 140 cm, 3 knives, Fsdpoy Ti Tmefx Ab Njgh adjustable fence, Router: spindle diameter 30 mm, 2 speeds, 3500/7000 rpm, side carriage, adjustable fence, Saw: adjustable up-down and 0-45 degrees, side carriage, guide rail on the side carriage, Horizontal drilling machine: Table adjustable up-down, front-back, and left-right. The machine has 3 motors, each with 4 kW. Power supply: 380V. Used machine in good condition, ready for operation. Robust multi-function machine. Weight: 760 kg.

Condition: good (used), Year of construction: 1999, power: 5.5 kW (7.48 HP), Equipment: CE marking, For sale is a robust and precise jointer and thicknesser from the German quality manufacturer Panhans. The machine is equipped with a Centrofix cutterblock. This quick-change system – similar to the Tersa cutterblock – allows for easy cutter replacement without time-consuming adjustment of the cutter knives. Fgsdszz Nk Eepfx Ab Noh Technical data and features: +Manufacturer: Panhans +Type: AD 440/445-B +Year of manufacture: 1999 +Planing width: 630 mm +Motor power: 5.5 kW +Operating voltage: 400 V +Total length of the jointer tables: approx. 2,300 mm +Centrofix cutterblock +Cutterblock speed: approx. 5,000 rpm +Digital display for planing thickness +Electromotive adjustment of the thickness table with the push of a button +Two rollers in the thickness table +Automatic workpiece feed +Two feed speeds +Massive, finely planed cast iron tables +Folding jointer tables +Swiveling fence up to 45° +Dust extraction connection +Motor brake +CE version The robust Panhans construction ensures smooth operation and clean planing results. The digital display, the electric thickness table adjustment, and the Centrofix cutterblock allow the machine to be operated comfortably, quickly, and precisely. Ideally suited for professional use in carpentry shops, joineries, and woodworking shops. The machine can be demonstrated under power by prior arrangement. Shipping via freight forwarder is possible. You will receive an invoice with VAT shown. Price: €13,685 including VAT - €11,500 net Subject to prior sale and errors in the technical data.

Condition: excellent (used), Multi-function machine, panel saw, thickness planer SCM Casadei Model: C 30 C Thickness planer 3 kW: Width: 30 cm, Max height approx. 200 mm, 3 knives, 1 feed speed, Jointer: Width: 30 cm, Table length: 150 cm, Fedoy Eyhropfx Ab Nsgh 3 knives, Adjustable angle fence, Spindle moulder 3 kW: Spindle diameter 40 mm, Spindle height adjustment up-down, 4 speeds, Side sliding table, Adjustable fence, Panel saw 3 kW: Scoring unit, Height and 0-45 degree angle adjustment, Sliding table 225 cm, Ruler on side table, Max saw blade 315 mm, Horizontal drilling machine: Table adjustable up-down, front-back, left-right, The machine has 3 motors, Power supply 380V, Used machine in good condition, ready for operation, Robust and multi-functional.

Condition: excellent (used), Toolmax K310 multi-functional machine: saw, planer, router – 5-in-1 Planer: width 31 cm, max height 195 mm, 3 knives, 1 feed speed, Jointer: width 31 cm, table length 155 cm, 3 knives, Fsdpfxsy Udvxs Ab Njgh adjustable fence, Router: spindle diameter 30 mm, 2 speeds, 150 cm sliding table, adjustable fence, Saw: adjustable up-down and 0-45 degrees, 150 cm sliding table, guide rail on the side table, max blade diameter 250 mm Horizontal drilling machine: table adjustable up-down, front-back, and left-right, the machine has 3 motors, each 3 kW + a motor for the planer feed, power supply 380 V, used machine in very good condition, ready to work.

Condition: excellent (used), functionality: fully functional, SLIDING TABLE SAW Carriage length: 1250 mm Scoring unit Saw unit tilts up to 45° Manual saw blade raise and lower Motor power: 2.2 kW SPINDLE MOULDER Spindle diameter: 30 mm Manual spindle raise and lower Fgedpfsz D Ad Ijx Ab Njh 2 spindle speeds: 4500/6000 rpm SURFACE PLANER-THICKNESSER Working width: 300 mm 3-knife cutterblock Standard knives Table dimensions: 1500x300 mm Thicknesser table: 300x600 mm HORIZONTAL BORING MACHINE 460 kg Year: 2009

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,706 h, power: 366 kW (497.62 HP), gearing type: hydrostat, fuel type: diesel, maximum speed: 30 km/h, first registration: 07/2017, next inspection (TÜV): 07/2026, rear tire size: 500/85 R24, machine/vehicle number: YHG233775, Equipment: air conditioning, cabin, hydraulics, lighting, rape cutter, trailer coupling, On behalf of an authorized party, we are offering the following used item for sale: Case-IH combine harvester AF 7240 with ST rotor Chassis number: YHG233775 Longitudinally arranged ST rotor 30 km/h version 6-cylinder Power: 366 kW (497 hp) Front wheels: Track drive, sprung, 610mm Rear wheels: 500/85 R24 HID work light package AC FAN automatic fan speed adjustment Adjustable discharge spout Cross-flow transverse flow fan Hydraulic drive Redekop chopper Xtra Chop Accu Guide complete Steering on Egnos – retrofitted with existing RTK antenna LED work light package, 4 x rear, 1 x grain tank inlet Additional cameras Yield and moisture measurement Radio, two-way radio Last inspection before the 2025 harvest, approximately 300 ha Minor scorching above the tank, damaged cables have been repaired Header 9.15 m, Series 3050, steplessly adjustable Type: 306 Year: 2017 Serial number: 868112015 Hydrostatic reel drive Fgsdozabtdopfx Ab Njh Automatic adjustment of reel speed Reel horizontal adjustment Hydraulic multi-quick coupler Short stubble divider Hydraulic rapeseed knife Rabolon ear lifter Header wagon TAM Leguan quattro 30 Type: SWW 30FT VIN: WEGTP28F3HAAA3318 Year: 2018 2-axle 25 km/h LED lighting set Tires: 10.0/75-15.3 Price upon collection. The item is located in 49419 Wagenfeld-Ströhen and must be collected from there by the buyer. This offer refers exclusively to the described item. Other items that may be shown here are possibly part of a different offer. Errors and omissions excepted. Inventory number: 2926-26