Combination machine buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5
OVERVIEW: Brand: Trumpf Model: Trumatic 2020R Application type: Punching Machine type: Laser Punch Combination Machine Availability: Immediately Construction year: 2003 Production hours: 36568 Location: Lithuania Origin country: Germany GENERAL DATA: Measurements width: 6448 mm Measurements depth: 7440 mm Measurements height: 2600 mm Machine weight: 15000 kg MAIN DRIVE: Punching force: 180 kN Max. sheet thickness: 6.4 mm Hvmlsf9 CONTROL UNIT: Brand: Trumpf Model: Bosch... more
6

Combination folding machine Horizon AFC 566 AKT

Oberhausen, GermanyGermany dealership location
6383 km
2012
used
Impression: ca. 22,3 mio. Machine: Combination folding machine HORIZON Model: - AFC 566 AKT Age: - 2012 Size: - max. 558 x 850 mm Bcri0aq0kb - min. 128 x 148 mm Grammage: - Paper weight: 40 - 250 g/qm Feeder: - Flat pile feeder Stack height: - 740 mm 1st fold unit: - 6 buckle plates for parallel fold 2nd fold unit: - 1 Folding knife for cross fold Gluing unit: - HHS 1 channel glue application system . Power supply: This machine is connected to 400 V, 50 Hz. Important: Connection requirements... more
6
"Saw and boring combination machine COMEC Foratrice FFR Working width max mm: 1.500 Saw aggregates per side: 2 Xrwc3ywo3 Boring supports per side: 1 Boring supports top-down: 3 Aggregates longside: 3 Milling aggregate: Yes Feed-through line: Yes Technical type: double-sided Infeed from magazine: Yes Operating status: dismantled/ stored Condition: very good" more
4
-Cutting length 2100 mm -Cutting width 800 mm -Cutting height 102 mm -4 system planing cutterhead -max outlet 230mm -3 cutting speeds 3700/6500/7800 RPM -3 motored â 4kw Bctf7bsexb more
8
combined folding machine Stahlfolder KH 78-6-KTL-PFH 82 age 2005 (checked and cleaned condition, all rollers, belts refurbished) max. size in crossfolding 78 x 120cm max. size in parallel folding 82 x 120cm min. size 14x18cm max. speed 230m/min. in parallel folding max. speed 200m/min. in cross folding Vbww0swhb pallet feeder PFH-82 with Tremat and MCT pocket folding unit BUH 1. Station with six pockets working width 82 cm, rear mounted slitter shaft cross folding unit BC... more
9
Operating hours: 98400 h Control system: Sinumerik 840D Table size: 2535 x 1650 mm Laser kW: 2 kW Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Naxgj Maximum sheet thickness: 8 mm Maximum workpiece weight: 200 kg Maximum laser power: 2700 W Maximum punching force: 220 kN Accessories: GripMaster 2x support table (3380x1290 / 3570x735 mm ) Set of tools including 3x multitool : Square: 10 pieces Rectangle: 23... more
15
Description: Here, on a super functional 5, offer specialized combination machine (table saw / milling machine Planer / Thicknesser, slot boring machine), Mark Thomas, which of course quality is 1 A. It is in very good condition. There are small traces of use. This machine provides you with a precise and powerful processing. You can edit this easy wood or other building materials according to your wishes. It is very easy to handle and to use. It is sturdy and very stable. Also large and very ... more
6
Size: 78 x 120 cm Machine: Combination folding machine MBO Model: - K 800.2 S-KTL-6 Built: - 2009 Size: - max 78 x 120 cm Feeder: - Pallet feeder - Automatic format setting in feeder Control: - Navigator control 1st fold unit: - 6 buckle plates for parallel fold 2nd folding unit: - 1 Folding knife for cross fold 3rd fold unit: - 1 Buckle plate left Ss0hsg 4th fold unit: - 1 Folding knife three-directional fold Equipment: - Knife shaft cassette - Noise abatement . Air supply: Without compr... more
6
"Saw and boring combination machine COMEC FI MO V 3300 Working width max mm: 3.300 Workpiece thickness max mm: 200 Aggregates per side: 1 Saw aggregates per side: 1 Boring supports per side: 1 Borers per side: 1 Boring supports top-down: 3 Aggregates tiltable: Yes Swivelling aggregates: Yes Borer alignment: Can be individually adjusted Technical type: single-sided Width adjustment: manually Angle adjustment: manually Main motor power kW: 4,05 CE-mark: Yes Required space lxwxh: 5500x1500x2200 0e... more
6
OVERVIEW: Brand: Trumpf Model: TruMatic 3000 fiber (K04) Application type: Laser Cutting Machine type: Laser Punch Combination Machine Availability: September Construction year: 2011 Production hours: 34000 Laser hours: 33000 Location: Spain MAIN DRIVE: Laser power: 3000 kW Punching force: 165 kN CONTROL UNIT: Brand: Siemens MOVEMENT: X-AXIS: Movement: 2500 mm Y-AXIS: Movement: 1250 mm WORKPIECE: Workpiece weight: 120 kg MAX MATERIAL THICKNESS: Steel: 4 mm ADD... more


combinatio...
daily

New machines via email!

Stay updated!
4
-3 system knife Planer shaft hammer -Planing width 310 mm -Cutting length 2050 mm -Cutting height 102 mm -4 cutting speeds 3000/6000/8000/1000 rpm -3 engines of â 4PS Vsirym -including driving device more
8

5 x combination machine Knapp Profi T

Kempten-Leubas, GermanyGermany
6788 km
2002
excellent (used)
Just profit T 5-ply combination machine -Circular saw -Milling machine -Surface planing and thicknessing machine -Langlochbohrsupport Year of manufacture 2002 -ᐳ very good condition -ᐳ machine has only a few hours of operation Technical data: Saw: Table 470x1100mm Cutting height 103 mm Sägblattt Ø max 315mm Motor 2,2 KW/400 V Speed 4300 RPM Be Mule car 370x2500mm Sliding table with Ablänglineral 1200-2500mm Milling cutter: Table 470x1100mm Spindle Ø 30mm Spindle height ... more
4
HINKEL TYPE K-310 5 wood-working machine comprising: -Planer - Thicknesser: Planing width 310 mm Balvjdtk2w Planing height 200 mm Dressing table length 1345 mm Feed speed 8 m / min. Motor power up to 3 kW -Saw: with sliding table Max blade diameter. 300 mm Cutting height of 90 mm Speed 4500 U/Min. Table size 1000 x 645 mm 45 ° swivel Motor power up to 3 kW -Milling machine: Speed 6200/3500/8000 RPM. Table size 1000 x 645 mm Clamping length 120 mmm Motor power up to 3 kW -Mi... more
6
7crinzrp7 "Saw- / end-matching combination machine BALESTRINI MIA PLUS Working width max mm: 2.600 Workpiece thickness max mm: 55 Workpiece width max mm: 100 Aggregates per side: 2 Saw aggregates per side: 1 Aggregates tiltable: Yes Swivelling aggregates: Yes Milling aggregate: Yes Technical type: double-sided Width adjustment: Programmable controller Angle adjustment: manually CE-mark: Yes Required space lxwxh: 4700x1400x1600 Weight kg: 2.700 Operating status: dismantled/ stored" more
6

Laser Punch Combination Machine Trumpf Trumatic 3000 L

Trippstadter Str. 110, 67663 Kaiserslautern, AlemaniaGermany
6535 km
2005
good (used)
OVERVIEW: Brand: Trumpf Model: Trumatic 3000 L Application type: Punching Machine type: Laser Punch Combination Machine Availability: Immediately Construction year: 2005 Production hours: 31181 Location: Poland Origin country: Germany GENERAL DATA: Measurements width: 2300 mm Measurements depth: 6800 mm Measurements height: 2100 mm Machine weight: 13000 kg MAIN DRIVE: Laser brand: TruCoax 2000 Laserpower: 2 kW Punching force: 165 kN M8xrn Maximum sheet thickness: 4 mm ... more
4
-Cutting length 2500 mm -Cutting height 102 mm Ne8f9 -Cutting width 700 mm -4 cutting speeds 3000/6000/8000/10000UpM -Planing width 310 mm -3-system planing cutterhead -3 motored â 3kw -Multieinstellsystem milling stop -Shaper fence with safety rulers more
5
One is sold well preserved fields combined machine from a hobby shop. 2500 long carriage. Accessories is the RIP fence, shaper fence, arc engine hood milling, Vorschubapperat and various blades. Bb9dti7790 more
3
REX Circular sawing/milling/slot boring machine with roller table Engine performance 5.5 HP Ccr8eyp more
2

"Saw and boring combination machine" PADE "NS /P"

Klipphausen, GermanyGermany dealership location
6821 km
1988
used
"Saw and boring combination machine PADE NS /P Bb33lm09iy Operating status: still connected Condition: good" more
4
4-way combination woodworking machine Fabr. SUSEMIHL type SU 260 Fabr.# 704, built in 1966 29hq2uf7 Technical data: Planing width 260 mm maximum planing thickness 110 mm Length 1200 mm the dressing table Length 480 mm fixed width table 2 speeds d drum 4000 / 6000 RPM. B. thickness planing speed 8 m / min. Diameter d. 2nd wave of knife 58 mm Platen size 710 x 380 mm Diameter d. cutter shaft 30 mm 2 speeds d cutter shaft 4000 / 6000 RPM. Max vert. Adjustability d. cutter shaft 110 ... more
4
-Cutting length 2000 mm -Cutting height 102 mm -Cutting width 800 mm -3 cutting speeds 3700/6500/7800 RPM -Planing width 410 mm -Fields system planing cutterhead -3 motored â 3kw Baio3vry more
6
Specifications: - water-cooled DC-AC plant TIG TR 4, - water-cooled MIG-MAG system DV - IV XT - E. welding equipment STH 400 - for welding: stainless steel, steel, aluminum, etc. - 16 times welding program can be preselected with: - - Vorwähleinstellung: E-welding, TIG - welding AC / DC, MIG-MAG welding - Digital Volt Ampere + Display - infinitely adjustable welding current of 10 A / 15 V up to 400 A / 34 A - max. Welding current max. 400 A 60% duty cycle - 315 A 100% duty cycle - Power consump... more
1

5-fold combination machine Lurem C 210

Hösbach Rottenberg, GermanyGermany dealership location
6602 km
used
45 ° tilting sliding table saw u.Hoehenverstellung Spindle moulder spindle height 30 mm Planer - Thicknesser Planer width 200 mm Slot boring machine 8ybeoh Driving device more
5
X = 2000mm Y = 1000mm Plasmaqülle Kjellberg 160i punching force 280 kN with Trumpf tool holder O33kwl8f more
5
"Saw and boring combination machine BALESTRINI MIA PLUS Working width max mm: 2.600 Workpiece thickness max mm: 55 Workpiece width max mm: 100 Aggregates per side: 2 Saw aggregates per side: 1 Boring supports per side: 1 Borers per side: 7 Aggregates tiltable: Yes Swivelling aggregates: Yes Milling aggregate: Yes Technical type: double-sided Width adjustment: Programmable controller Angle adjustment: manually CE-mark: Yes Nc73z Required space lxwxh: 4700x1400x1600 Operating status: still connec... more
5

Combination folding machine MBO K 820-6-KZ-PD 95

Dabergotz, GermanyGermany dealership location
6679 km
1999
used
palettfeeder MC-control counter 1st parallel folding unit: X3ycuiq0 6 combi buckle plates 1st cross-fold unit: cross fold knife 1 nd cross fold unit: cross fold knife left & right noise prevention over all three units peripheral units and deliveries delivery ASP 66 more
4
-Cutting length 1300 mm Bbwif0xui0 -Cutting width 600 mm -Cutting height 80 mm -2 cutting speeds 5000/7500 RPM -3 Tersamesserwelle -Planing width 310 mm -Dressing length 1200 mm -including driving device more
1

Machine combination Lips Kombi 5er

St.Gallen, SwitzerlandSwitzerland dealership location
6741 km
used
Lips of 5 machines combination. 2x8cpazv0 consisting of: -1 planet mixer with 50 liter boiler capacity and continuous speed verstellung.inkl. various accessories. -2 electric mixers with speed and broom rash Verstellung.Fussbedienung for Kesselhalterung.inkl. Accessories. -1 universal friction and cutting machine, including accessories. -1 roller grinding machine with 2 rolls of 30 cm long and 15 cm in diameter. Fully operational machine. more
2
310 mm planing width 4 cutter Gcu9aqf 2 advance speeds in the thicknessing table 6 and 12 m / min Multieinstellsystem 2.5 m Formatschiebetisch 4 kW Motors 400 V, 50 Hz Square table more
6
TECHNICAL DATA: Working width max mm: 3200 Transverse travel mm: 250 Saw blade diameter mm: 350 Rotation speed max rpm: 3600 Saw blade motor power KW 2.2 Saw blade inclination: -45° + 45° Mshcx Boring units rotation: 45° Rotation speed max rpm: 2800 Boring unit motor power KW: 1,1 more
6
"Single-sided saw and boring combination machine GREDA IFS CS Aggregates per side: 3 Saw aggregates per side: 1 8cogbhgvs Boring supports per side: 1 Borers per side: 4 Dowel insertion: Yes Dowel insertion aggregates: 2 Borer alignment: Row Technical type: single-sided CE-mark: Yes Operating status: not connected Condition: good" more
3
-3 system knife Planer shaft hammer -Planing width 310 mm -Cutting length 1250 mm -Cutting height 102 mm 8c8mtfd28 -4 cutting speeds 3000/6000/8000/1000 rpm -3 engines of â 4PS more
4

5-fold combined machine Kity LS D25

Hösbach Rottenberg, GermanyGermany dealership location
6602 km
used
Kity LS D25 5 x combination machine L2inl Built in 1999 G & 2754 M38C9 more
6

Saw and boring combination machine Omef /

Cormons, ItalyItaly dealership location
7093 km
1999
used
TECHNICAL DATA: No 2 circular blades motors HP 3 - 2800 rpm No 5 drilling units motors HP 1 - 2800 rpm No 1 conveyor belt feeding machine HP 0,5 - 1400 rpm Pneumatic movements with hydraulic brake Stacking / Destacking device with pneumatic cylinders Electro-pneumatic machine control with PLC: Beyba8t Overall dimensions: -Length Mm: 2500 (useful for cutting and drilling) -Height Mm: 1400 -Width Mm: 1800 more
6
"Saw and boring combination machine KOCH COMPACT-CNC Working width max mm: 2.500 Workpiece thickness max mm: 80 Workpiece width max mm: 200 Aggregates per side: 3 Saw aggregates per side: 1 Boring supports per side: 2 Borers per side: 4 Boring supports bottom-up: 1 Dowel insertion: Yes Dowel insertion aggregates: 1 Aggregates tiltable: Yes Swivelling aggregates: Yes Borer alignment: Row Technical type: double-sided Width adjustment: Positioning control Angle adjustment: Positioning control Infee... more
2

4-way combination machine Hammer C3-41

More Hammer C 3
Hösbach Rottenberg, GermanyGermany dealership location
6602 km
2003
used
Hammer C3-41 Lpikx Combined machine 410mm planing width 3 knife system Planer shaft (HSS blade) 2 m Formatschiebetisch Boom Boom with Ridge-grid system 3 Motors 3 kW 400V 50 Hz milling driving device G &-2678-M371D more
6

"Combination machine" SICAR "GT 200 N"

Klipphausen, GermanyGermany dealership location
6821 km
used
"Combination machine SICAR GT 200 N Saw blade diameter max mm: 350 Bcbeawta29 Circular sawing machine: Yes Spindle moulder: Yes Weight kg: 575" more
2

5-fold combined machine Felder BF6-41

More Felder Bf 6
Hösbach Rottenberg, GermanyGermany dealership location
6602 km
1992
used
Fields BF 6-41 Combined machine 3 Motors 3 kW 400 V 50 Hz Formatschiebetisch: 1700mm Miter gauge: - 45 ° 90 ° + 45 ° Saw blade diameter: 315 mm Cutting height: 106 mm Saw unit 90 °-45 ° swivel Speed: 4700 RPM Parallel cutting width: 800 mm Uri9d08g8 Planing width 410 mm 2-drum Built in 1992 G & 2648-M3CVA more
6
"Saw and boring combination machine HOFFMANN X-LINE-SERVOFLEX5 SO7.148 Workpiece thickness max mm: 95 Workpiece width max mm: 140 Aggregates per side: 4 Saw aggregates per side: 1 Boring supports per side: 1 Borers per side: 1 Swivelling aggregates: Yes Milling aggregate: Yes Technical type: double-sided Width adjustment: Programmable controller Angle adjustment: Programmable controller CE-mark: Yes Declaration of CE-conformity: Yes Yrjtrk Required space lxwxh: 7500x2000x2000 Operating status: ... more
1

5-way combination machine Hammer C3-31

More Hammer C 3
Hösbach Rottenberg, GermanyGermany dealership location
6602 km
used
Sliding table 2m 310mm planing width Ldznp 3 blade system Planer shaft (HSS blade) 3 Motors 3KW 4PS 400V 50 Hz Boom with grid with drive systems G &-2524-O1868 more
4

4-way combination machine Hammer C3-31

More Hammer C 3
Hösbach Rottenberg, GermanyGermany dealership location
6602 km
2003
used
Hammer C3-31 4-way combination machine hammer • Sliding table 2m • Planing width 310mm • Planing height width 3 mm to 230 mm • 3 blade system Planer shaft (HSS blade) • 3 Motors 3KW 4PS 400V 50 Hz M9rnr • Boom with grid • Milling machine spindle 30mm • Lateral fence with angle grid G & 2874-M320T • • • special price: more
1

5-fold combination machine FELDER CF 741 Professional

Hösbach Rottenberg, GermanyGermany dealership location
6602 km
2000
used
5 combine fields Yptv2o Planer - Thicknesser 410 mm Format sliding table saws 200 mm Swivel milling machine 45° 3 speeds 4Messer system Planer shaft (blade) 4 KW 5.5 HP Motors 50 Hz 400V Circular saw cutting height 105 mm 2000. more
1

FLAT TABLE MACHINE (W/ATC/BORING) WEEKE VANTECH 510

North Carolina, United StatesUnited States dealership location
518 km
2013
used
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Ndgm9 WEEKE VANTECH 510 FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications:5' x 10' Flat Table Bridge style gantry machine with User-Friendly "S/C Tech" "MATRIX" grooved phenolic vacuum table. -- Working Area:"X" Axis is 122" (3,100 mm), "Y" axis 61" (1,550 mm), "Z" axis stroke is 9.6" (243.8 mm), max. material thickness of 3.9" (99 mm). -- Positioning Speed:"X" Axis is 236 FPM (72 MPM), "Y" axis is 203 FPM (62 MPM), "Z" axis 82 FPM (25 MPM);The head... more
1

KOOKUT KK21 VERTICAL PANEL SAW SAGETECH MACHINERY KK21

Unit Chilton Industrial Estate 17, DL17 0PB Ferryhill, County Durham, GBUnited Kingdom
5734 km
2010
good (used)
Alongside our home grown brand new British manufactured Vertical Panel Saws, Sagetech Machinery are also now offering APPROVED USED MACHINES! The used vertical panel saw machines that have been traded in by our own clients who are upgrading their previous Sagetech models, giving us the opportunity to asses the value of their previous machines, make any improvements and have our own team of engineers vet them to ensure that they still have plenty of life left in them. We only sell on approved use... more
1

Gang POLLARD 150A/4/6 4 Spindle Drilling Machine

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Ehdyxnf more
15
Very compact calibration and fine grinding machine, wide belt sander Weber KLE 2000 A video of the current machine can be sent on request. Suitable ideal sanding machine for interior design companies, also for intermediate lacquer sanding Cross belt 9,2 kW with Elektronikschleifschuh 32 mm and Ellen Ribbon lamb Laengsschleifaggregat as a combined unit 11 kW, frequency controlled by 2-20 m/s, with calibration function (grooved steel contact roller) and pressure bar 32 mm Belt feed contin... more
2

Table Type Boring and Milling Machine SCHARMANN FB 80

Mönchengladbach, GermanyGermany dealership location
6371 km
1961
used
spindle diameter:80 mm x-travel:1000 mm y-travel:710 mm faceplate diameter:500 mm spindle taper MT:5 Tephbfcmc total power requirement: kW weight of the machine ca.:12 t dimensions of the machine ca.:5,0 x 3,0 x 3,0 m 3-axes digital readout more
5
Clamp welding machine, plastic film sealer Lic8x -Connection 220V Working width 300 mm Weight 10 kg more


combinatio...
daily

New machines via email!

Stay updated!

to

to

Edit search
COMBINATION MACHINE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close