Collection machine buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
3
Table Surface 4.500 X 1250 mm Longitudinal Traverse (X Axis) 4.000 mm Mt3jgc Cross Traverse (Y Axis) 3.000 mm Vertical Traverse (Z Axis) 1.000 mm Distance Between Columns 2.300 mm Rapid Feed (X Axis) 15.000 mm/min Rapid Feed (Y ,Z Axis) 12.000 mm/min Max. Working Feed 7.000 mm/min Head Type Ortogonal UAGA Orthogonal Milling Head indexing every 2.5º / 2.5º Taper ISO-50 / DIN 69871 A Spindlespeed 3.000 r.p.m. Main Motor Power 30 KW. Range Speeds 2 Ranges Carrying Load Table 10.000 Kg. Machine Wei... more
6
ROLAND DirectDrive RCI PressLink ColorPilot D+F Roland Deltamatic APL - simultaneous plate change in all printing units Fawin9kes Plate change parallel with blanketwashing/impression cylinderwashing Remote register adjustment TelePresence QuickChange job Technotrans Alcosmart Powder: Grafix Cantronic Roland Seccomatic IR/TL Dryer Plate-, blanket, and impression cylinder chromed Ink temp. control Technotrans beta.c Imppression cylinder blowing device All aut. washing devices Carton guiding at si... more
6
Closing force: 2,700kN; Injection volume: 1.000cm³; Opening force: 100kN; Closing stroke: 495mm; (Clamping dimensions: 560x630mm;) width: 950mm; 4pcs. additional heating circuits 3,6kW max 230 ° C; Striping aid with electr. Drive; Control: B&R FLEX 3; 400V/50Hz 83kW; Weight: 11.7t; Hydraulic hours: 2.227h; Hall 4 I3d30mz more
3
drilling-machine Cordia 10 drilling-capacity 10-12 mm 230 V Cwe3mx9z 2 x available more
5
Double end, edge banding machine, Ritz Motor, Zerspanermotor, electric motor, spindle motor, milling motor br / br / power 3.7 kW 5820 r / min at 100 Hz br / power 3.7 kW 17350 U / min at 300 Hz br / voltage 220 / 220 Volt br / uptake shaft 24 mm br / -dimensions 355/125 / H210 mm br / weight 20 kg Ukurgwvwe more
6
We have one Kirk-Rudy KR 600 Newspaper Inserting System ,with T-line, available. Year 2011 More pictures available! This KR600 system has 22 feeders - 6 x Rotary feeders KR694 - 2 x shuttle feeders type KR894 - 12 shuttle feeders type KR324 - 2x jacketfeeders type KR324 - labelling-unit, model 535-HD - Conveyor, model 600 - 1x compensating stapelaar, model KR 950 - including all the parts The KR 600 Newspaper Inserting System offers a wide array of features and capabilities that increase r... more
6
rotor dia 630 mm hobbing length 1700 mm clamping length 1740 mm milling cutter diameter 600 mm range of angles 0 - 60 ° hob turning speeds 20 - 120 U/min milling motor 45 kW milling slide travel 1270 mm spindle bore 203 x 838 mm max. workpiece diameter 630 mm pitch in mm 150 - 2500 mm milling width 216 mm boring diameter 100 mm total power requirement ca. 60 kW weight of the machine ca. 26,5 t dimensions of the machine ca. 5,3 x 6,25 m Auto Pump- Rotor Milling Machine This machine is designe... more
6
EN: Mt7wao Closing force: 2.700kN; Injection volume: 2.000 cm³; Breaking force: 100kN; Closing stroke: 550mm; Release force: 98kN; Retraction Force Separator: 58kN; Heating plates: 670x800x69mm; (Clamping dimensions: 560x630mm,) temperature control units: 3pcs. Regloplas H²O, 2pcs. Regloplas oil; Striping aid with electr. Drive; Control: B&R FLEX 3; 400V/50Hz 68kW; Weight: 13t; Hydraulic hours: 344h; Hall 4 more
5
Radial drilling machine Kolb recording MK 5 RADIUS approx. 1,500 mm spindle speeds: 10-2,500 rpm Kühlmitteleinrichrung of tilting cube table approx. 540 x 730 x 580 mm machine vise jaw width 160 mm gg. Extra charge available dimensions: approx. 2,000 x 900 x 2.750 mm Phowidtir more


collection...
every day

New machines via email!

Be informed!
3
Punching, Nibblers, Shears, Circle Scissors Power 900 watt max cutting capacity 3 mm dimensions 550/330/H130 mm Weight 10 kg Qljq0zcav more
2
bore capacity in steel 100/120 mm throat 3000 mm Wvj8u2jpw travel -x axis 4000 mm bed length 6000 mm vertical adjustment of arm 1260 mm vertical adjustment of bore slide ---- mm distance spindle/base plate 440-2100 mm bore depth 400 mm turning speed range 18-1800 U/min feed range 0,0375-2 mm/min spindle diameter / taper / MK 6 mm stroke 400 mm electrics - voltage/frequency 380/50 V/Hz total power requirement 15 kW in 2002 geometrically reconditioned in parts more
3
bore capacity in steel (diameter):30 mm throat:300 mm bore stroke:160 mm total power requirement:5,2 A tool taper:MK 3 spindle turning speed range:42 - 1450 U/min Vr3lxe engine output:1,4 / 1,6 / 2,2 kW motor speeds::720 / 950 / 1450 1/min. table-size:500 x 450 mm column diameter:125 mm weight of the machine ca.:380 kg dimensions of the machine ca.:0,5 x 0,7 x 2,1 m more
5
bore capacity in steel (diameter) 60,0 mm bore capacity in cast iron 70,0 mm column distance -mid boreslide 2000 mm morse taper 5 MK spindle stroke - max. 330 mm turning speeds 28 - 1.250 U/min automatic feeds 0,1 - 1,12 mm/U Dah8flr3s crossrail adjustment vertical 720 mm base plate 1.840 x 1.000 mm total power requirement 4/5 kW weight of the machine ca. 5.500 kg. more
3
stable stand drill ERD 50/60 Drilling capacity 6-50 mm in St60 recording: MK 5 automatic feed spindle speeds: 40-620 RPM. 2oq2nm more
3
Punching, Nibblers, Shears, Circle Scissors Power 900 watt max cutting capacity 3,5 mm Dimensions 500/220/H230 mm Weight 5 kg Qljoopvan more
5
x-travel:700 mm y-travel:550 mm z-travel:500 mm feed speeds:1 - 2000 mm/min Table area:800 x 500 mm rapid traverse:5 m/min spindle turning speed range:25 - 3150 U/min spindle taper ISO:40 spindle diameter in front bearing:70 mm spindle motor:7 kW quill stroke:100 mm total power requirement:12 kW Uwwj7xe3s weight of the machine ca.:3,3 t dimensions of the machine ca.:3,5 x 2,8 x 2,1 m HEIDENHAIN TNC 355 CNC control for 4 axis NC table [...] swivelling Heidenhain touch probe coolant device, mot... more
6
Corner cleaning machine BF / S year 2000. Two milling Motors edit outside of the welded frame Two Nutaggregate to the parting of the welding track top and bottom Scanning system on groove depth A perfectly machined Groove by hydraulic measuring motion Fully automatic operation - direct framework entry in the shine Fully automatic controlled clamping system - essential if the profiles have different heights Easily adjustable milling and groove depth Acrylic or wood-structured profiles s... more
5
pre-owned No. 448/85 Knoevenagel copy milling machine Ptjp0y more
1
various hand lever profile and flat steel scissor, flat steel blade length 200 to 300 mm, partially with profile and steel cutter Ld7zwulc more
3
x-travel:19000 mm y-travel:2500 mm z-travel:1250 mm spindle motor:31 kW spindle turning speed range:10 - 10000 U/min spindle taper::HSK A 80 number of tools:104 :A-Achse +100/-90 c-axis:+/- 200 ° M27qp feeds:1 - 16000 mm/min rapid traverse::16 m/min weight of the machine ca.:80 t total power requirement:65 kW dimensions of the machine ca.:25,5 x 10,0 x 5,2 m Machine equiped with SIEMENS 840 D control for 5 axis - NC 2-axis fork type milling head - BALLUF tool identification system - MARPOSS ... more
4
Machine KOLBUS standard sniffer for to 841.A 9yxsi03ti more
3
Baj9fjswkdTesting machine for tensile strength of castings Control desk of tensile strength The messurment device is not complete As seen, ex works more
6
New EUR 6000 Bai08sxeqt incl. control box more
3
max. ram stroke:320 mm throat: mm Ughb8a7pn table diameter:630 mm main drive:11 kW cross adjustment:510 mm long. travel of table:650 mm total power requirement:15 kW weight of the machine ca.:6,0 t dimensions of the machine ca.:3,1 x 2,2 x 3,1 m more
6
Color monitor Cardboard investor 9yxowmzc3 Gluing and pressing station Viscosity control unit Rolling display Corner kick device more
3
HEIDENHAIN interface PCB [...] 324-955-04, serial number according to the photo, used, low wear, 100% functional Bvs7v9w0 more
6
sheet width 3240 mm plate thickness 2 mm distance between columns 3340 mm daylight upper clamping 350 mm bending angle max. 0-135 ° adjustment of lower and bend clamping 80 mm Qmokkowie power requirement 2,2/1,5 kW weight of the machine ca. 3410 kg dimensions of the machine ca. 4,3 x 1,1 x 1,6 m Condition: ready for operation Foot switch with 2 pedals Electric 380 Volt Motor-driven machine with 3 - fold potentiometer for angle adjustment, manually adjustable (by hand or foot) and autom... more
6
groove width 125 mm drawing length 1250 mm pulling force - max. 5 t stroke length max. 925 mm table surface area 550 x 700 mm workpiece weight 6000 kg cutting speed 1 - 12 m/min return speed 2 - 24 m/min Gaaemc0i feed 0,219 mm/DH total power requirement ca. 5 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,5 x 1,5 x 3 m - quick adjustment for the Feed - automatic return adjustment - Oil Tank with pump - 3 Tool Cabinets - large set of toolings + accessories Tools for drawing... more
5
Honing horizontal honing: 5 - 40 mm speed range: 700 - 2800 r / min table: 270 x 260 mm Dimensions: 1000/600/H1300 mm Weight: 260 kg Hhwqc30y8 more
5
- HEIDENHAIN-control CNC 232 8owalj3q - table size: 800mm x 360mm - fixed angle table - travel range X/Y/Z: 500/300/350 mm - spindle speed: 63-4000 rpm - hydraulic tool clamping - automatic central lubrication - machine lamp - coolant device - handwheel at all axis for conventional control - weight: ca. 1800 Kg more
6
Cardboard cutter HP Pappenschrenzmagazin (3. control unit 9yxo978w7 more
3
Siemens 1FT6064-1AH71-3FH1 3 ~ engine, serial number according to the photo, good condition, 100% needed, functional, included with com. photos My7yn more
2
bore capacity in steel (diameter) 16 mm arm length 525 mm Ey9uatz workpiece height max. 400 mm spindle taper MK2 bore depth 85 mm table plate 400 x 510 mm height 1090 mm height adjustment 650/200 mm column diameter 100 mm spindle turning speed - 12 steps 100 - 2800 U/min Drive 0,4 kW weight of the machine ca. 165 kg dimensions of the machine ca. 1,4 x 0,47 x 1,05 m Condition: ready for operation Electric 380 Volt Boring chuck Drilling unit is radial to move 360° and after scale to the... more
5
max. wheel diameter 800 mm gear width 170 mm max. module 12 min. module 1 max. number of teeth 400 min. number of teeth 10 max. angle of teeth 23 mm max. ram stroke 200 mm dia. of shaper cutter 200 mm Xtixnyw dividing plate diameter 672 mm taper Morse Nr. 5 faceplate diameter 800 mm Length movement of the table 700 mm double strokes/min. 33 - 188 Stück electrics - voltage/frequency 380 / 50 V/Hz workpiece height max. 300 mm total power requirement 15 kW weight of the machine ca. 10,5 t dim... more
5
Slicer, slicer, slicer Laden slicer dimensions 600/600/H450 mm power 250 watt 2x machines available-price-piece weight 50 kg / piece Cbzjir8i more
6
Deburring machine Indumasch KF 500 Table design adjustable angle of 15 ° to 45 ° Fqmk03z9i 380 V more
6
2-head welding machine for welding of PVC profiles in window construction Please note video, because pictures say more like a thousand words. See the video below for the attached documents. Working length up to 4 m Simultaneous welding of two corner joints in a 90 degree angle With weld seam limitation With Teflonschnellwechselsystem With an automatic seal formers (see video) All welding parameters can be individually set Bajrzbjbzg PLC control system great work-piece supports Su... more
5
tube diameter 26 mm or tube thread 1/4 - 3/4 Dvhgp0r weight of the machine ca. 400 kg dimensions of the machine ca. 2,0 x 0,8 x 1,1 m Condition: ready for operation Manually operated tube bending machine, in good condition, with lots of accessories 7-set tools : 26 / 23 / 19,5 / 16x16 / 14 / 18 / 16 mm diameter. Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
6
x-travel 1250 mm y-travel 700 mm z-travel 665 mm table-size 1350 x 700 mm table load 1200 kg spindle taper ISO 50 DIN 69871 turning speed range 20 - 2100 U/min control Heidenhain TNC 355 feed X/Y/Z-axis 1 - 3000 mm/min. rapid traverse X/Y/Z axis 6000 mm/min. spindle motor 14 kW electrics - voltage/frequency 380 / 50 V/Hz total power requirement 30 kW weight of the machine ca. 10,3 t range L-W-H 3,3 x 3,4 x 2,5 m CNC control Heidenhain TNC 355 Mvslh original HURON-milling head, hydr. tool c... more
5
Nibbler, Nibbler, Circle Scissors max material 4 mm drive 0.85 kw-speed 3000 r / min Dimensions 530/350/H360 mm Weight 55 kg Js3pte more
6
1 used circular sawing machine Kaltenbach KKS400 NA replenishment unit Blade Max (Ø): 400 mm Cutting (Ø): 130 mm Section square: 120 mm Flat cutting area: 315 x 40 mm P profile max: 40-160 mm I profile max: 40-160 mm Pipes max: 20 x 2 / 40 x 3 / 60 x 4 mm 80 x 5 / 130 x 7 mm Bevel cuts: 13-25 m / min Tza308rs3 Material clamping cylinders: short stroke Drive: 1.7 / 2.6 kW Hydraulic: 0.75 kW Saw blade feed continuously variable: 0 1000 mm / min. Machine weight: 0.85 t Dimensions:... more
6
groove width 3-100 mm drawing length 1000 mm working speed 2-20 m/min return speed 40000 mm/min clamping table 500x770 mm cutting capacity 4080 kp weight of the machine ca. 15 t dimensions of the machine ca. 4,5x2x4 m Bqu8ivd with indexing table, counter stay and other accessories. more
4
HEIDENHAIN LS 403 lengths dipstick [...] 226 520 25 ML 520 mm, connector is missing see photo, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Gvgez8 more


collection...
every day

New machines via email!

Be informed!

to

to

Change search
COLLECTION MACHINE
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close