Calendar machine for sale
Identified location: Ashburn (US) (Edit)
Perforating machine Punch Super 600
The machine is brand new.
12 months warranty.
Perforator Super 600 is an industrial machine used for perforating paper, among others, in the production of calendars. The solid construction of this device allows for continuous and one-time hole punching of a block of paper up to 5 mm thick. The efficient drive system enables 60 cycles per minute. The device has been designed in a way that allows us to change the tool which makes the machine more universal, the... more
Europa VS660 Gap Bed Centre Lathe with 660mm swing x 1500mm between centres. Equipped with Fagor 2 Axis DRO, 3 jaw chuck. Quick change toolpost and toolholders. Large capacity, heavy duty lathe
Specification
Europa VS660
Centre height 330mm
Distance between centres 1500mm
Swing over bed 660mm
Swing over cross slide 430mm
Spindle bore (max. bar dia) 104mm
Spindle nose mounting D1-11 Camlock
Taper in spindle bore No. 7 Morse
Swing in gap 860mm
Width of bedways 480mm
Total travel of cross slide 390... more
2019
as good as new (ex-display)
GALAXY - III (PVC)
Milling copier with triple socket for drill bits (handle) and water drainage channel boreholes for PVC profiles
APPLICATION:
Used for cutting out handle sockets in aluminium and PVC profiles (openings, sockets for mounting locks, grips, hinges, opening channels etc.).
FUNCTIONS:
- Ease of use and operational safety through ergonomic design
- Possibility to open different channels independently of copy sets
- Copying sets
Ivpxmrgd
- Pneumatic clamps
- Triple drilling jack
- Pos... more
1996
used
Size: 760 x 1000 mm
Bgntif8ohp
Equipments:
unbranded electric drying tunnel
primary and secondary lamps
including 1996 Svecia SMC 30 x 40
seri screen OZS ultra violet systems
jumbo infeed deck
outfeed stacker
1200mm width capacity
fully automatic cylinder-screen printing machines
seri screen SUVD/De Jager engineering UV drying conveyor more
Manual or NC downfeed control
Working area X/Y/Z 300/600/500 mm, grinding wheel Ø 355 mm,
G0szoun
motor 3,7 KW, speed 1750 rpm., dimension 3100x1900x2200 mm,
weight ca. 2200 kg, digital read out, compl. hausing, 4 wheel flanges,
instruction manual, Installation pads; run only with oil.
with magnetic chuck + coolant system more
AVAILABLE ON REQUEST
brand-new CNC cycle lathe
Manufacturer STYLE, type Style 750 with CNC control STYLE
Service for commissioning etc. from
- Munich / Germany
- Erwitte / Germany
- Netherlands
Bjt2ob7r2d
Developed for individual parts and small series
Simple and intuitive operation
Modern, ergonomic and encapsulated design
Different models with turning diameter from 300 - 1200 mm
centre distances between 500 and 5000 mm
Precise double prism guide
Stable cast iron bed with double prism
Full e... more
FOD Milling and copling machine. DFPA 40 horizontal profile milling machine
Manufacturer FOD
Model / type of machine. Horizontal profile milling machine DFPA 40
Year of production 1989
Category of machines. Milling and copier
Location
Gorzów Wlkp.
Conditions of delivery
own collection
Cost of delivery
Customer cover
Start type
to be agreed
Description
Comments
Destiny:
The DFPA 40 horizontal milling machine is a universal machine tool with a wide range of applications in the furniture and ... more
2007
excellent (used)
Radial drill press in good condition.
With motorized boom (Up / Down)
Morse taper 4
Travel on the boom: 725 mm.
Travel on spindle: 270 mm.
32 - 2500 rpm.
Bnxo2cb
0.06 - 0.8 mm / rpm feed rate.
Spindle diameter: Ø65 mm.
Max height between table and spindle: 995 mm.
Total dimensions: 180 x 85 cm.
Height: 248 cm. (Transport height: 228 cm) more
Ingersoll Hansen Center 300 EDM CNC Erodiermaschine
Hersteller [manufacturer]: Ingersoll Hansen
Typ [ type]: Center 300
Bgwdgynkma
Steuerung [control unit]: MultiPulse Control
Baujahr[construction year]: 1997
+ Inkl. Handheld
+ Inkl. EROWA Preset Comfort 3D-22 / Robot X system EDM dynamic tooling system (optional)
+ Inkl. EROWA 3-D Koordinatenmesssysem (optional)
Vollständige Dokumentation ist vorhanden.
Besichtigung unter Strom kann kurzfristig erfolgen.
Für weitere Fragen stehen wir Ihne... more
1993
used
Size: 760 x 1000 mm
Equipments:
jumbo infeed deck
seri screen SUVD/De Jager engineering UV drying conveyor primary and secondary lamps
unbranded electric drying tunnel
primary and secondary lamps
including 1993 Svecia SMC 30 x 40
1200mm width capacity
outfeed stacker
Bgnth3nito
seri screen OZS ultra violet systems
fully automatic cylinder-screen printing machines more
Product code of Kamarakis website: AUT – MHX - BIN – 001
Bins feeder & tumbler
It receives 4 bins full, one over the other, empties them one by one and picks up the gaps one over the other.
Empty bins every 4 seconds
Capacity up to 120 bins / hour
Bi2ioocco
The machine is temporarily stored in our premises (BUILDING B)
Immediately available
For more refurbished, used and new machines from the food industry visit our website: kamarakis-usedmachinery more
2020
as good as new (ex-display)
GARNET 5X 5-axis machining centre
The 5-axis CNC machining centre, GARNET, has the capacity to machine aluminium profiles of different sizes, thanks to a spindle that allows machining at any angle between 0/180 on the A axis and 0/360 on the C axis, providing solutions for a wide range of operations.
The machine has been developed for all-in-one milling:
Open a channel, punch, mark and finish milling on profiles and perform special custom operations on different profiles.
Automatic terminal posi... more
milling machine for arches
swiveling milling spindle machine
It has for the transport of feed is used for milling
arc elements
Wucxmcy3c
Special machines more
VERTICAL CNC lathe HNK
controling FANUC
Offset Y - 2000mm
Bjbqkvsmjd
Table diameter 4000
Max turning diameter 4500mm
Two supports, static and driven more
good (used)
Schwerlastdrehmaschine Meuser Lathe machine Drehbank
Heavy Duty lathe machine
Typ: Meuser
Maschinenzubehör wie auf den Fotos ersichtlich.
Die Maschine stammt aus einer Betriebsauflösung und aus erster Hand.
Aufladung durch uns möglich.
Maschinen/Anlagen Abmessungen ca. in cm. (LxBxH)
Tisch/Maschinenbettlänge: cm
Tisch/Führungsabmessungen:
Maschinengewicht ca.: 14000 kg
Die Maschine befindet sich im Originalzustand.
Für weitere Fragen stehe ich gerne zur Verfügung. Bitte schreiben oder ... more
vice
Make Chick machine tool
Length 500 mm
Bgoxj0wamo
Width 150 mm
Height 130 mm
Weight 22 kg
Age estimated
Jaw width 150 mm more
Product code of Kamarakis website: KAM-RAF-SPA-001
Crusher and rotary sieving machine (Rafineza)
It has an electric control and operation panel
Bfn8udynzv
Crusher input dimension: 380mm x 120mm
Drum length: 1020mm
Diameter of drum: 390mm
Hole diameter: 0.8mm
It has a three-phase motor
The machine is temporarily stored in our premises (BUILDING A)
Immediately available
For more refurbished, used and new machines from the food industry visit our website: kamarakis-usedmachinery more
2019
as good as new (ex-display)
LEPUS X - plotter and machining centre in one
CNC router for aluminium machining 4m, 3 axes
Bhs7jomdca
APPLICATION:
It is used for cutting, machining and milling aluminium and composite panels.
FUNCTIONS:
- Types / classes of recyclable materials: aluminium board, aluminium composite board, laminated composite, wood composite, various plastic boards, aluminium industrial or semi-industrial boards
- Automatic storage for 8 tools
- Vacuuming in independent sections
- Intelligent CAM post processin... more
Modular drilling machine GOMAD WU 2 C 2 G 2 T 2020 new machine
Location
Gorzów Wlkp.
Conditions of delivery
OWN COLLECTION
Cost of delivery
Customer cover
Startup Type
to be agreed
Description
Comments
Double-sided WU multi-spindle drills are designed for making holes for dowels in wood, chipboard and wood-based materials.
The WU drill has three drilling units - two vertical and one horizontal side, which allows drilling three rows of holes simultaneously.
WU
Number of drilling units rig... more
1982
used
Driven table
Measuring device
Bfd0ziddlb
Table diameter 1520mm
Table height 880mm
Measuring device:
-Rotating
-Cross adjustment manual 745mm
-Vertical adjustment manual 1250mm
MARCELS MASCHINEN CH more
FERMAT machine tool, s.r.o., Prague / Czech Republic
Universal cylindrical grinding machines BHC 63 CNC with cast iron bed * max loop length of 6,000 mm * swing up to 1,000 mm * workpiece weights up to 5,000 kg (with Bezel)-general product description
Machine base made of cast iron
Machines are with control Siemens 840 d sl (828 D sl) or B + R delivered power Panel 900.
Remote Diagnostics free to current warranty and beyond!
CNC Schleifscheibe Abrichtung
Fk2zobn
Reference visits throughout Germ... more
Product code of Kamarakis website: KAM – PAS - TUB - 001
Tubular preheater
inox
Full rebuilt with electric board
Capacity 20.000 kg/h
tube in tube heat exchanger.
For temperature 80-90 degrees.
Depends on the flow.
Pt08bi
Without temperature controller.
The machine is temporarily stored in our premises (BUILDING B)
Immediately available
For more refurbished, used and new machines from the food industry visit our website: kamarakis-usedmachinery more
2019
as good as new (ex-display)
ALCOR II C
8-axis CNC-controlled cutting and machining centre
7 spindles
APPLICATION:
For cutting, milling, punching and marking on 4 profile surfaces
MAIN FEATURES:
- Precise cutting at any angle from 30° to 150°
- Up to 10 profiles can be loaded
- No waste cutting
- CNC control, touch screen
- Data transfer via remote network connection, Internet and USB
- Remote access
- Pneumatic maintenance system
- High processing capacity to increase efficiency
- Processing on 4 profile surfaces possible
... more
Automatic Drilling Machine for Drawers AWP
Fexfdpchc
An automatic universal drilling machine designed for drilling openings for dowels and handles as well as longitudinal grooves in wood, particle board and wood-derived products e.g. front panels of drawers. The machine uses two top units, two bottom units, a stock feeder and an undercut saw. It operates in an automatic cycle.
The top and side drilling units travel along guides and the position of their spindle axes can be adjusted. The machi... more
not much used NC lathe with control Fagor 8055 TC, turning length 895 mm, distance between Centers 1120 mm, Center high 265 mm, swing-Ø over bed 530 mm, swing-Ø over carriage 300 mm, bed width 350 mm, bore Ø 80 mm, spindle speed 48-2200 U/Min., motor 15 KW, dimensions 2300x2000x1950 mm, ca. 3000 kg, incl. 3-jaws chuck Röhm Duro T-315, increased spindle Speed with cooler, steady rest with bearings Ø 80-280, coolant device, 2nd door, manual
Nuehn more
2006
excellent (used)
1 used very well preserved high performance CNC turning and milling center with FANUC series Oi-TC and bar feeder SAMSYS MUS 3000
Max. Swing diameter 550 mm
Max. Turning diameter over slide 350 mm
Max. turning length 255 mm
Bar work up to a diameter of max. 45 mm
Speed range - 6,000 rpm
Spindle holder A 2-5
Drive power 11/15 kW
Spindle positioning C - axis yes
Tailstock MK 4
Machine dimensions L x W x H 2020 x 1650 x 1820 mm
Machine weight 3800 kg
Accessories / Special features:
- CNC path contr... more
FERMAT Machine Tool, s.r.o., Praha / Czech Republic
FERMAT HORIZONTAL TABLE DRILLING AND MILLING PLANT - WRFT 130/150/160 CNC *** X: 2.400 mm to 9.500 mm *** Y: 2000 to 6.000 mm and spindle diameter up to 160 mm
The horizontal bench-type boring and milling machine WRFT 130/150/160 CNC offers a new, conceptual machine solution among the large bench-type boring mills with an efficient and powerful headstock. This in turn consists of an extendable stick (travel V) and an extendable spindle (travel ... more
2019
as good as new (ex-display)
LEOplus
J82pyb
LEOplus automatic cutting centre 550 mm disc with automatic profile feed robot
APPLICATION:
Used for cutting aluminium, PVC and wood profiles
FUNCTIONS:
⦁ fully automatic operating system
⦁ hydropneumatic cutting
⦁ Automatic positioning. All levels between
-22.5° to +45° with an accuracy of +-0.1°
⦁ Industrial PC with Windows, 10" touch screen and easy, practical interface
⦁ Precision slicing function
⦁ Big memory
⦁ Adjustable disc stroke speed
⦁ Automatic cutting with previous... more
Location
Gorzow Wielkopolski.
Conditions of delivery
Xlxhzz88q
Pick your own
Cost of delivery
Client cover
startup type
negotiated
Description
Comments
Pour SIDED ADHESIVE Pour DOSING ROLLERS imposing TOTAL 4 ROLLERS LENGTH OF ROLLS 1600 mm more
Sweeper applied 414 RS Nr. 5, year 2011, B-92594, 3019 operating hours, 2 cylinder diesel Kubota Z483E, 9 kw, 6 km/h, sweeping width mm 1140, forward and reverse, covering scratched and eigerissen, marker lamps broken broom arm bent down
Bbxodmlric more
Complete automatic system for the production of conical buckets, Hobbocks, 10/15/20/25 l
Diameter bucket top 285 mm
Diameter bucket bottom 272 mm
Production capacity approx. 50 pieces/min
Noyit
The plant has been completely overhauled, is in a very good operational condition and is still in production!!!
If necessary, a complete assembly and commissioning can be offered to the buyer!!! more
FERMAT Machine Tool, s.r.o., Praha / Czech Republic
HORIZONTAL PANEL BORING AND MILLING MACHINE - WRF 130/150/160 CNC
to X: 30,000 mm *** Y: 6,000 mm and spindle diameter up to 160 mm
The horizontal CNC boring and milling machine WRF 130/150/160 represents new structural concepts of horizontal panel boring mills on the market. The powerful headstock consists of an extendable stick (travel V) and an extendable spindle (travel W). The WRF boring mills make it possible to achieve extremely high eff... more
2019
as good as new (ex-display)
ALCOR I
THREE-AXIS CUTTING CENTRE CONTROLLED BY CNC
APPLICATION: For cutting aluminium, PVC and wood profiles, blade Ø 550 mm.
MAIN FEATURES:
- Precise cutting at any angle between 30° and 150°
- Up to 7 profiles can be loaded
- Waste treatment capacity of more than 800 mm for new production
- No waste cutting
- CNC control, touch screen
- Data transfer via remote network connection, Internet and USB
- Remote access
- Pneumatic maintenance system
- High processing capacity to increase efficiency... more
Machine for the construction of houses
N2qhcrv7g
The machine consists of feed before and after the saw, milling and drilling machines, drills, mills and cut the angle of the beam in the construction of houses more
Sweeper applied 414 RS, year 2011, B-92602, 2501 operating hours, 2 cylinder diesel Kubota Z483E, 9 kw, 6 km/h, sweeping width mm 1140, forward and reverse, Push broom is missing, scratched Panel and eigerissen, faulty lights, otherwise works He
Nbwsv more
Swing over bed 2020 mm
Distance between centres 35000 mm
Max. weight of workpiece 63000 kg
Machine dimensions l x w x h 45000 x 3800 mm
Machine weight 153000 kg
Yr8xa8
Good technical condition
Contact me for price and more information. more
Washing room dimensions: 900x700x3000mm, max. parts weight: 500kg, door aperture: 750x3080mm, for the internal and external cleaning of profiles, pipes or tubes, control: Siemens Simatic S7.
7frxlmtlt more
2019
as good as new (ex-display)
DELTA III
Automatic slicing saw , blade Ø 450 mm, PLC control system
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Shield 450mm
* minimum slice thickness 5mm
* maximum slice thickness at one time 750mm
- Safe cuts thanks to the cover with safety sensor
- Automatic terminal system
- Cutting speed control
- Digital adjustment of the blade extension according to the width of the cut profile
- Feeding of profiles with a system that prevents them from being damaged... more
KEGEL AJ BS packaging machine
Producer KEGEL AJ
Model / type of BS machine
Year of production 2013
Category of machines. Packaging machine
Location
Bezvtftjd3
Gorzów Wlkp.
Conditions of delivery
OWN RECEIPT
Cost of delivery
Customer cover
Start type
to be agreed
Description
Comments
FOILING FOLIA ROLLER more
Sweeper applied 414 RS, year 2011, B-92598, 1245 hours, 2 cylinder diesel Kubota Z483E, 9 kw, 6 km/h, sweeping width mm 1140, forward and reverse, Push broom is missing, scratched Panel and eigerissen, marker lamps defective, replace battery,. Oil leak replace the actuator oil ring, otherwise it works
Bbrfmmoogs more
Incjection moulding machine with heating setting and is great preserved.
Gdchap9r
There are available documentations and instructions.
Dimensions of the machine: 900 x 1800 x 4300 mm more
Clamping area : 5600 x 1880 mm
Mounting plate height : 400 mm
Equipment weight : 7000 kg
G7ruj3h
Contact me for price and more information. more
Gear Hobbing Machine WM R2-4SP
SKU: WEB-1229
For all other inquiries you can freely contact us.
Xxiynjtw more
2019
as good as new (ex-display)
Automatic single-headed saw, blade Ø 500 mm + conveyor K-3000 right in standard
APPLICATION:
For cutting aluminium, plastics and wood profiles
FUNCTIONS:
Iwqqn3br
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- 0°, 15°, 22.5°, 30°, 45°, 67.5° right and left fixed angles
- Can be cut in any intermediate angle between
- 67.5 ° to + 45 °
- Speed control based on the type of cut profile
- Horizontal and vertical pneumatic clamps
- Rip cutting of profiles 180°, distan... more
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Photo gallery: The World's 10 biggest excavators
Sponsorship of Michael van Gerwen and TV advertising
New Machineseeker.com TV commercial with Michael van Gerwen
Sample sales contract for used machines in nine languages
Photo gallery: the 10 strongest forklift trucks in the world