Used Carpentry Machine for sale (65,047)

Condition: like new (used), Year of construction: 2022, operating hours: 40 h, functionality: fully functional, total width: 1,600 mm, total length: 3,700 mm, total height: 2,200 mm, type of input current: three-phase, spindle speed (max.): 2,406 rpm, grinding spindle motor power: 22,000 W, overall weight: 12,000 kg, input frequency: 60 Hz, input voltage: 480 V, space requirement height: 2,200 mm, Very Low Hours, Hardly Ever Used- Specifications: Bdedpfxo Agptys Afgsi Workpiece diameter: max. 100 mm (3.94") Workpiece diameter: min. 2 mm (.08") Workpiece length with plunge grinding: max. 195 mm (7.68") Grinding wheel diameter: max. 500 mm (19.69") Grinding wheel diameter: min. 380 mm (14.96") Maximum wear of the grinding wheel - Straight plunge cut: 60 mm in radius (2.36") - Inclined plunge cut: 25 mm in radius (0.98") Width: max. 200 mm (7.87") Bore: 305 mm (12") Circumferential speed of the Grinding wheel standard: max. 63 m/s Regulating wheel diameter: max. 300 mm (11.81") Width: max. 200 mm (7.87") Bore: 203 mm (7.99")Grinding wheel drive power standard: 22 kW Unit: Metric - Provision of the grinding wheel and regulating wheel unit: X1/X2 axis - Infeed axis of the grinding wheel dressing tool: Z1 axis - Longitudinal feed of the regulating wheel dresser: W2 axis - Speed control of the grinding wheels: SP1 spindle - Speed control of the regulating wheel: SP2 spindle 3 operating modes: - Set-up - Grinding in single operating mode (only with plunge grinding) - Automatic grinding - cycle operating mode Noise emission at the machine: Automatic loading - Basic machine: approx. 12,000 kg (approx. 26,455 lbs.) - Dimensions of the basic machine (without control cabinet) Length: 3,700 mm (146") Width: 1,600 mm (63") Height: 2,200 mm (87") Equipped with: Grinding Wheel Balancing System, Regulating Spindle Swivelling, Height Adjustment of Work Rest Holder-NC axes, Auxiliary for Grinding Wheel Exchange, Second Operating Panel, Loading Unit, Loading System for Manual Loading, Unloading System with Integrated Measuring Unit, Workpiece Dependent Accessories, Compact Filter Unit

Condition: good (used), functionality: fully functional, Staircase cheek milling machine, Engelhart Riser and tread milling machine, TWF 1000 Year of manufacture: 1984 400 volts, 2.8 / 3.5 kW Bdjdpszv Ehcefx Afgei 2 speeds: 1390 / 2830 rpm Runs in both directions (left and right) Material clamping with foot pedal Clamping dimension, max. 130 x 10 cm New pressure reducer Undercarriage Chip collection – Extraction hose Includes 16 mm milling cutter Dimensions: 180 x 100 x 180 cm Weight: 400 kg

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: 4208 E, Makita carpentry mortise machine, type 5500 S Bjdpfx Afjy Id Sgegjdi Motor: 1,420 W, 230 volts, 50 Hz Longitudinal saw blade speed: 1,650 rpm Crosscut saw blade speed: 2,200 rpm Complete with R. Beck "Vario" saw and work table Workpiece length, max: 3,100 mm Adjustable angle: 0 to 45° Ex works, as inspected at the Seevetal location Excluding transport; subject to prior sale.

Condition: good (used), Code: 0473 Brand: SCHNEIDER - GERMANY Model: SLK 300 - CE Standard Universal circular saw for cutting large-sized beams, wooden roofs, wooden walls, laminated beams and various applications - CE Standard Automatic workpiece feed with speed variator Blade diameter mm 800 Blade inclination 90 - 30 degrees with display Manual table rotation from 0 to 180° Cutting height at 90 degrees mm 300 Cutting height at 30 degrees mm 150 Cutting width mm 900 Motor power Hp 15 (Kw 11) Bdsdpfx Afjzquw Aegsi Automatic raising of the blade with bimanual control Visualizing laser cutting light N° 2 pneumatic cylinders for clamping pieces with wheels Machine cover with manual opening Protection hood for longitudinal cuts Table size 1560 x 1560 mm Table height mm 940 Infeed roller conveyor mm 6000 x 650 Outfeed roller conveyor mm 6000 x 650 N° 2 suction inlets mm 150 Compressed air 7 Atm Overall dimensions of disassembled machine : Machine mm 3200 x 2200 x 2200 h - N° 1 Roller conveyor mm 6000 x 650 x 1050 h - N° 1 Roller conveyor mm 6000 x 650 x 1050 h Weight kg 2200

Condition: used, Year of construction: 1995, SPINDLE MOULDER WITH LONG TABLE & POWER FEEDER Brand: ROBLAND Model: T120S-L-P Year: 1995 Machine offered as-is, without warranty SPINDLE MOULDER CAPACITIES: - Spindle diameter: Ø50 mm Useful length (above the table): 150 mm Vertical spindle stroke: 205 mm Bdsdpfx Aox Igzqefgei - Spindle speeds: 3000/4500/6000/7000 rpm MACHINE SPECIFICATION: - Sturdy welded steel frame - Cast iron table (LxW): 310x190 mm Side extensions: 670x250 mm Frontal table extension: 2460x620 mm with entry roller Table rings: Ø350; Ø250; Ø200 Raised tool passage in table: Ø320 x 95 mm - Wooden fences: 530x150 mm Fine adjustment of the hood and indexed stops Maximum tool diameter for guide work: Ø250 mm TENONING: - Sliding tenoning carriage 760x500 mm Equipped with graduated transverse stop with adjustable end stop Adjustable support arms ensure complete rigidity of the carriage rail - Adjustable tool approach table with eccentric clamp - Angular adjustment of the fence with graduation from 0 to 45° - Tenoning hood guard - Maximum tenoning tool diameter: Ø350 mm Equipped with a power feeder: - Brand: Polymatic Year: 1996 - Power: 0.75 kW - 3 rubber feed rollers - 2 feed speeds (mechanical and electrical) OTHER CHARACTERISTICS: - Electrical supply: 380V, 3-phase + T, 50Hz - Manual star-delta starting - Installed power: 6.25 kW - Main motor power: 5.5 kW (7.5 HP) - Lockable isolator, emergency stop button - Safety guard for guide operations - Dust extraction inlet on spindle hood Ø120 mm Lower suction port Ø120 mm Dimensions (LxWxH): 270x165x165 cm Weight: 800 kg

Condition: new, Year of construction: 2026, functionality: fully functional, nominal power: 5 kW (6.80 HP), 5 kW, 7.5 hp Bodpfx Ajdxw U Iefgjdi Cutting height 200 mm Tilts up to 60° to the left, up to 30° to the right via hand crank from the front Cutting height when tilted at 45°: 140 mm Cutting width 420 mm, cutting width when swiveled at 45°: 290 mm Swivels up to 60° to the left, up to 45° to the right Includes saw blade for wood 6,000 mm heavy-duty outfeed roller table, mounting side on the left, adjustable stop with handwheel from the machine in length, pneumatically lockable, length digitally readable, digital display in 230V version 4,000 mm heavy-duty infeed roller table, mounting side on the right Machine can be tilted on both sides from the front via hand crank and worm gear On request, various options are available, e.g., larger cutting height (215 mm and 240 mm), pneumatic material clamping, and laser cutting indicator With appropriate modifications, also suitable for aluminum processing The roller tables, type RLH-ST60 and RO-ST60, can be supplied in longer or shorter versions upon request.

Condition: used, Year of construction: 1990, input frequency: 50 Hz, Equipment: double-sided, We offer this used Michael Weinig H 22 BL planer, manufactured in 1990. Type: H 22 BL Year of manufacture: 1990 Machine number: 220-1274 Voltage: V Frequency: 50 Hz Also included is a sharpening machine. Bodpfjz H I Nbjx Afgodi If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: new, Year of construction: 2026, functionality: fully functional, Technical Data: Cutting height: 200 mm Cutting height at 45° incline: 140 mm Tiltable to the left up to 67° Tiltable to the right up to 45° 5 kW hydraulic feed brake (optional) Cutting length: 420 mm at 90° position Cutting length at 45° swivel: 295 mm Tilt angle: left 60°, right 30° Tilt adjustment from the front via hand crank. 1 wood saw blade, diameter 520 mm 1 heavy-duty cross-cut roller conveyor, length 6,000 mm, mounted on the left. The stop is adjusted from the front via handwheel. Length is digitally readable to the millimeter. The stop is pneumatically locked. 1 digital readout (230 V version) Bdedpjn R A Ewsfx Afgsi 1 heavy-duty feed roller conveyor, right side, length 4,000 mm Machine length: 11,700 mm Fully mobile Machine packed on wooden planks Images show a customer’s machine. Available upon request also with 215 mm or 240 mm cutting height.

Condition: new, Year of construction: 2026, functionality: fully functional, 5 kW, 7.5 hp, movable on sturdy swivel casters Bodpfodxxadsx Afgjdi Cutting height 200 mm Cutting height at 45°: 140 mm Swivels to the left up to 60° Swivels to the right up to 45° Cutting length 420 mm at a 90° position Cutting length when swiveled to 45°: 300 mm Tiltable to the left 60°, tiltable to the right 30° using a hand crank from the rear (also possible from the front on request) 1 piece saw blade 520 x 4.4 x 50 mm, 60 teeth, negative bevel Left roller bed with scale and stop slide, length 2000 mm to the saw blade Machine length 4000 mm 1 piece roller bed extension with scale and 2nd stop slide Mounting side: left, length 4000 mm. This extension roller bed also features an extendable measuring rod with a stop, allowing for precise cutting of wood on the left side up to a length of 7500 mm. 1 piece infeed roller bed, mounting side: right, length to the saw blade 2000 mm, can also be extended. Options: pneumatic material clamping Laser cutting guide With appropriate modifications, also suitable for aluminum processing Can also be supplied with a cutting height of 215 mm or 240 mm for an additional charge Without the extension roller bed, the machine costs €13,969.00 net.

Condition: as good as new (ex-display), Year of construction: 2000, The machine was only operated for 2 weeks. It is practically new and unused. Bedeh T Ayqepfx Afgjdi

Condition: used, Year of construction: 1994, machine/vehicle number: 9400207, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 13,000 mm, workpiece width (max.): 280 mm, workpiece height (max.): 160 mm, actuation type: electric, total length: 21,000 mm, Equipment: CE marking, documentation/manual, The AUER Unicapp CNC carpentry line is fully functional for standard carpentry work and can process KVH and BSH timber in full lengths (13m). A roof structure or other wooden construction designed in a drafting software program for carpenters, such as SEMA, can be directly sent to the CNC machine. Demonstration and testing are possible. Maximum working height with processed timber width is 26/24 cm. The machine has a miter saw, mortising machine, drill, saddle milling machine, rabbeting and tenoning cutter, and an automatic feeder. More information is available by phone. The machine software is still supported. Total machine length is 21m, and it requires a 3x50A main circuit breaker. Technical data: AUER UNIKAPP – carpentry processing line (Abbundanlage / Zimmerei-Bearbeitungszentrum) Manufacturer: Ervin Auer Maschinenbau, Abtenau (Austria) Successor company: AUERTECH GmbH & Co KG (Lindenthal 63, 5441 Abtenau (Austria) Type: UNIKAPP Category: Carpentry processing center (carpentry line) Power: 30 kW Voltage: 380 V Serial number: 9400207 Year of manufacture: 1994 Max. workpiece width: 280 mm Max. workpiece thickness: 160 mm Total number of units: 5 Sawing units: 1 Drilling units: 1 Milling units: 2 Mortising units: 1 Workpiece feeding: using clamping jaws (sliding carriage with pneumatic/hydraulic clamping) Compliance with standards: CE marking Total electrical power consumption: 30 kW This is a carpentry line for processing beams/roof structures – it combines a saw for cross-cutting and mitering, milling cutters for fitting, mortising joints, a drill, and a mortising unit. The workpiece is moved using clamping jaws along the entire length of the beam with pneumatic clamping. If you have any questions or need further information, please feel free to send us a message or contact us by phone. A roof structure or other wooden construction designed in a drafting software program for carpenters, such as SEMA, can be directly sent to the CNC machine. The machine has service support, and the ABB control program upgrade corresponds to the latest version. Demonstration, testing, and loading are possible. Bdodjzz Tv Ejpfx Afgei It provides similar performance to a Hundegger K1. If you have any questions or need further information, please feel free to send us a message or contact us by phone.

Condition: used, Year of construction: 2006, Timber processing machine Manufacturer: Hundegger Type: K2-4-450 Bodpfx Afozzcx Aogjdi Year of manufacture: 2006 Technical data - Maximum timber length for feeding: 13 m - Maximum timber length for stacking: 12 m - Color: RAL 5012 blue - Infeed cross conveyor, 5 strands, horizontal, 2.2 m with flat belt chain - Infeed strand with shaft extension - Extension support with infeed device - Undercarriage swivel miter saw - Universal milling machine, 4-axis, UF4 - Roller cutter - Finger cutter - Dovetail cutter - Combination support for vertically operating tools - Drilling unit, 2.2 kW - Drilling unit, 3.0 kW, reinforced - Combination support for horizontally operating tools - Drilling unit, 2.2 kW - Slotting unit - Marking unit - Stacking table, 6-arm - Fully automatic beam turning station, pneumatic - Refined timber support surfaces - Label printer Note: The technical data and descriptions are a verbatim transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Bodpjxxb Rrofx Afgjdi Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 28,000 h, controller model: Siemens Sinumerik 840 D SL, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, working length: 4,000 mm, working width: 2,000 mm, The machine will be powered until Wednesday, November 4th, and will then be dismantled. TECHNICAL DETAILS Resonator power: 5 kW Working area (L x W): 4,000 x 2,000 mm Sheet thickness, steel: max. 25 mm Sheet thickness, stainless steel: max. 20 mm Sheet thickness, aluminum: max. 20 mm Speed: max. 235 m/min Accuracy: 0.001 mm Bdsdpo Agvnksfx Afgji MACHINE DETAILS Control system: Siemens Sinumerik 840 D SL Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine weight: 13,000 kg Operating hours: 28,000 h EQUIPMENT LiftMaster Power supply for TruDisk via the machine Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning TRUMPF laser Solid-state laser TruDisk 5001 with one LLK output Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Cutting head Universal cutting unit with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection 17-inch touch color screen Simple workshop programming Advanced workshop programming Fast reproduction Integrated technology data Automatic shutdown FastLine FlyLine AdjustLine Remote service via internet USB interface RJ-45 network connection CE marking Light barriers Multi-camera base system Compact dust extraction system Machine cladding with certified viewing window, door on the right Electric roll-up roof Retrofit capability for max. 2 additional LLK outputs

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK Bsdpfxsz Eh Ege Afgedi XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Bdsdpfsz Iz Imsx Afgji Manufacturer: Apollo Model: 4AX 2030 Year of manufacture: 2021 Condition: used Machine type: CNC Router If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Bdedex D Tbmepfx Afgji Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Randek intersection saw SPL728 Computer controlled, revolving, with LAN (Ethernet) connection for downloading or storing sawjobs (text file in ASCII format). The number of programs that could be stored is limited only by the size of the hard disk. Through the graphical touch screen (HMI), the operator is able to track all details directly on the screen or direct the saw directly to minimize disruptions in the production run. Sawblade: Heart metal, low noise, 700 mm Ø / 116 teeth, Bsdpfxjfg Tate Afgedi 360 ° horizontal swivel, 90 ° -28º inclined, 250 mm entry depth Engine performance 7.5 kW. Automatic closed-lock plastic protective screen. Supply bank, selectively 4.0 / 5.8 / 8.2 / 10.6 m long Driving role, IRO4-120, driven. Transport roll 76 mm Ø, roll length 400 mm, roll spacing C / C 500 mm. Return value 120 mm. Pressing device, pneumatic, 2 piece Select direction from left or right. Delivery bank, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Computer controlled rolling stock type LX. Execution guide, rollers 76 mm Ø, length 400 mm. Hinged hooks 120 mm. 2 computer-controlled longitudinal locks, driven by gear belts. Hump ​​1 - designed for cutting lengths up to 50 mm. Note 2 - runs over the entire length of the carrier bank. The positioning of the longitudinal abutment and the setting of the cut angle requires independent computer control. Maximum speed of longitudinal contact 1 m / s. Wooden furniture: 1 piece Return devices: 2 pieces Direction: select from left or right

Condition: used, Year of construction: 2019, TECHNICAL DETAILS General Information Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Machine Type: Heavy-duty CNC turning machine Year of manufacture: 2019 Condition: well-maintained Control System Control system: Siemens ShopTurn / Siemens CNC 840D Working Area Distance between centers: 1,500 mm Swinging diameter over bed: 1,100 mm Spindle bore: 165 mm Spindle and Drive Main drive: 70 kW Speed range: max. 660 rpm Machine Construction Bed width: 558 mm Machine bed: heavy cast iron construction Bdsdpe Aayk Rjfx Afgoi Tailstock: included, electric Operating Condition Inspection: possible by appointment Functional test: possible via video before shipping or collection EQUIPMENT Siemens ShopTurn Siemens CNC 840D Electric tailstock Automatic central lubrication Coolant system Full enclosure Large chuck Safety guard Work area lighting

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Bdsdsy Ni Ivjpfx Afgoi Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, ASCO APM 40 Automatic Dry Ice Block & Slice Wrapping Machine. For sale: a used ASCO APM 40 automatic wrapping machine, specifically designed for wrapping dry ice blocks and slices. The machine is in fully functional condition. Product-contact parts are made of stainless steel. It features automatic conveyor pitch adjustment, torque-controlled motors, and electronically controlled sealing temperature, displayed on the screen. The control panel includes visual alarms and a self-diagnostic function. Technical specifications: - Manufacturer: ASCO - Model: APM 40 - Year of manufacture: 2009 - Condition: Used, fully functional - Working speed: Up to 25 wraps per minute - Film speed: Up to 25 meters per minute - Maximum wrapping width: 250 mm - Maximum wrapping height: 60 mm - Wrapping lengths: 40–260 mm, 140–580 mm, or 200–800 mm - Compressed air: 4–5 bar - Standard version: Right-hand operation - Location: Noordwijkerhout, Netherlands Suitable for dry ice producers and suppliers who want to automatically wrap dry ice blocks or slices. Contact us for more information. Bjdpfxezxgglo Afgodi ASCO APM 40, ASCO APM40, ASCO automatic wrapping machine, ASCO dry ice wrapping machine, dry ice block wrapping machine, dry ice slice wrapping machine, dry ice disc wrapping machine, dry ice packaging machine, dry ice block packaging machine, dry ice slice packaging machine, automatic dry ice wrapper, dry ice block wrapper, dry ice slice wrapper, dry ice packaging equipment, dry ice wrapping equipment, dry ice film wrapping machine, dry ice block packer, dry ice packaging line, industrial dry ice packaging machine, used dry ice wrapping machine, used ASCO wrapping machine, dry ice CO2 block wrapping machine. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, Bdedjz St Hwopfx Afgsi 8 Station ATC, coolant, Low Volt light.

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Bdedpfx Ajydvzdofgoi Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Table size 1200mm x 600mm, spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, Bdedpfxez Eh Nlo Afgei 43M/min rapids, Spindle taper BT40, 30 station ATC, through spindle coolant, swarf conveyor.

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC. Bjdpfx Afoz R Rbdsgedi