Used carpentry machines for sale (52)

Condition: used, Year of construction: 1996, Mortise spindle Tree 50mm Tool for profiling up to 350 mm Sold as is, without cleaning or inspection. Nlsdpfx Aez Skikjmtsh

Condition: excellent (used), Year of construction: 1986, MAFELL Erika table saw, with a laterally adjustable fence. Nodpfx Amoz Sarujtolh

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: 4208 E, Makita carpentry mortise machine, type 5500 S Motor: 1,420 W, 230 volts, 50 Hz Longitudinal saw blade speed: 1,650 rpm Crosscut saw blade speed: 2,200 rpm Complete with R. Beck "Vario" saw and work table Workpiece length, max: 3,100 mm Adjustable angle: 0 to 45° Ex works, as inspected at the Seevetal location Nlodpfxey Id Sgj Amteh Excluding transport; subject to prior sale.

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 20518, We are offering this used Schmidler S4 woodworking machine, manufactured in 2000. Manufacturer: Schmidler Model: S4 Year of manufacture: 2000 Type of machine: abbundanlage (cross-cutting machine) - 4-strand cross-feed conveyor (inclined) - Infeed roller conveyor - Zero-point detection - Electronically controlled under-table swivel miter saw - Saw blade diameter 710mm - Rotation angle 360 degrees - Tilt 0-65 degrees - Waste wood discharge - Marking pen, horizontal (from below) and vertical (from behind) - Universal milling cutter including finger cutter and dovetail milling cutter - Horizontal drilling unit – rafter nail drilling unit - Vertical drilling unit - Powered outfeed roller conveyor - Pusher – pneumatic - Transport and measuring system - Conveyor belts to be replaced - Control system: sema btl Maximum component dimensions: Height 300mm Width 400mm Overall length approx. 21m Infeed roller conveyor Outfeed roller conveyor with pusher and stacking bars Machine used, fully functional, Conveyor belts to be replaced Machine can be inspected by arrangement. Available for sale immediately. If you have any questions or would like more information, please send us a message or call us. Nljdpfxjy Ewxzs Amtjh

Condition: used, Year of construction: 2010, The solution has been developed for the production of prefabricated exterior wall panels intended for house manufacturers. The system consists of three main components: one rail-mounted nailing bridge and two worktables. Nailing Bridge: The nailing bridge is designed for automated panel nailing using four nail guns interconnected with the corresponding opposite side. The system includes four nailing units which automatically perform nailing operations according to predefined nailing patterns at the respective worktables. Nodpfx Ameykqxdjtelh The nailing portal is mounted on a floor-installed rail system bolted to the concrete floor, allowing the bridge-type nailing system to move between the two worktables as required. The system is equipped with photocells for positioning and safety control. Function • The rail-mounted frame is positioned in a neutral loading position between the two worktables. • The nailing operation is initiated from either of the two worktables. • The selected nailing pattern is executed automatically. • The nailing portal is activated to carry out the nailing process in accordance with the chosen pattern. Worktables: The worktables are designed with support grooves for positioning timber studs. These grooves are adjustable via sliding mechanisms, enabling adaptation to different panel types and configurations. Function • The outer edges of the table are adjusted towards the panel using a manual control. • The selected battens are manually positioned to provide support for accurate panel placement. • The operator positions the components to be assembled into the appropriate grooves and against the battens. • The bridge-mounted nailing system is activated to perform nailing according to the selected pattern.

Condition: as good as new (ex-display), Year of construction: 2012, functionality: fully functional, machine/vehicle number: Modular, WEINMANN BUTTERFLY TURNING TABLE Nlsdpfxst Uh Ayo Amtjh

Condition: used, Year of construction: 2015, Wall line, manufactured to produce walls for modular manufacturing. Used by a Swedish producer between 2015 and 2021. NOTE: Sold in its current condition. Station lengths: 7000 mm Station width: 2700 mm Station nr1: Framing station CAD/CAM (includes two nail tools) Station nr2: Working table Station nr3: Semi automatic nailing bridge (includes two nail tools) Station nr4: Working table - Upraiser table Station nr5: Multifunction portal CAD/CAM (includes four screw tools and milling unit) Nlsdpfx Amoxv Arxetjh Station nr6: Working station - Receiver table - Moveable sideways Station nr7: Working station - Angle transmission Station nr8: Working station - Upraiser table Station nr9: Working station - Angle transmission Station nr10: Working station - Upraiser table

Condition: good (used), functionality: fully functional, Staircase cheek milling machine, Engelhart Riser and tread milling machine, TWF 1000 Year of manufacture: 1984 400 volts, 2.8 / 3.5 kW 2 speeds: 1390 / 2830 rpm Runs in both directions (left and right) Material clamping with foot pedal Clamping dimension, max. 130 x 10 cm New pressure reducer Nljdpfxezv Ehcj Amtjh Undercarriage Chip collection – Extraction hose Includes 16 mm milling cutter Dimensions: 180 x 100 x 180 cm Weight: 400 kg

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: AB/129942, F410 SURFACER Surfacing width: 410 mm Total table length: 2600 mm Table height: 855 mm Infeed table length: 1450 mm Adjustable aluminum fence, up to 45° Fence dimensions: 1100 x 170 mm 4-knife cutterblock, diameter: 120 mm Cutterblock rotation speed: 5000 rpm Motor power: 4 kW SCM surfacing guard integrated into the machine frame Dust extraction port diameter: 120 mm Manual star-delta switch Nlodpezadchofx Amtsh Motor circuit breaker, undervoltage release Main switch, lockable Automatic motor brake Adjustable auxiliary fence Available in ARDENNES

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, RANDEK REVOLVING CROSS CUT SAW Nledevryhgopfx Amtoh

Condition: used, Year of construction: 2000, Used, good condition Make: Schneider Type 2406 Year of manufacture: 2000 Machine no. 910 Nodpfx Aowkvw Hjmtjlh CE-certified Cutting height 250 mm Saw blade tiltable between 90° and 30° (60°) Turntable rotatable 180° Motor power 7500 W, 400 V Saw blade diameter 650 mm Cutting height for rip cuts Continuously adjustable from 0 to 250 mm Cutting width adjustment for rip cuts 650 mm by transverse saw movement Motorized tilting with digital display Movable machine stand Automatic saw feed with two-hand control Laser kerf indicator, cross cut Pneumatic workpiece clamping on the right and left New price approx. €25,000.00 Extraction connection 100 mm Space required approx. 2800 mm x 2800 mm x 2000 mm Weight approx. 900 kg Storage location 97447 Gerolzhofen, free on freight, unpacked Handed over in as-is condition, as seen, without warranty or guarantee

Condition: good (used), functionality: fully functional, UDKP100 Multi-blade circular saw - 37kW motor power - max. cutting height: 100mm Njdpexbrutefx Amtjlh - max. cutting width: 300mm - max. working width: 450mm - diameter of circular saw blades: 250-300-350mm - working speed: 40m/min - chain-belt feed - manual blade height adjustment - extra thick steel frame, saw blade guide made of specially alloyed, hardened, and ground steel - manual blade height adjustment depending on the selected blade diameter - large set of spacers included Due to the age of the used machine, the warranty is excluded when sold to commercial customers.

Condition: used, Year of construction: 1990, input frequency: 50 Hz, Equipment: double-sided, We offer this used Michael Weinig H 22 BL planer, manufactured in 1990. Type: H 22 BL Year of manufacture: 1990 Machine number: 220-1274 Nlodsz H I Nbopfx Amtjh Voltage: V Frequency: 50 Hz Also included is a sharpening machine. If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Rated power consumption 3000W (Cuprex high-performance motor), rated voltage 230V 50Hz, rated no-load speed 4050 rpm, milling head 15 x 115 x 30 mm, cutting depth 0-70 mm (83.5 mm), swivel range 0-60°, weight approx. 20 kg, cutting speed 31.8 m/s. Nedpfxozvyb Do Amtslh

Condition: used, Year of construction: 1995, SPINDLE MOULDER WITH LONG TABLE & POWER FEEDER Brand: ROBLAND Model: T120S-L-P Year: 1995 Machine offered as-is, without warranty SPINDLE MOULDER CAPACITIES: - Spindle diameter: Ø50 mm Useful length (above the table): 150 mm Vertical spindle stroke: 205 mm - Spindle speeds: 3000/4500/6000/7000 rpm MACHINE SPECIFICATION: - Sturdy welded steel frame - Cast iron table (LxW): 310x190 mm Side extensions: 670x250 mm Frontal table extension: 2460x620 mm with entry roller Table rings: Ø350; Ø250; Ø200 Raised tool passage in table: Ø320 x 95 mm - Wooden fences: 530x150 mm Fine adjustment of the hood and indexed stops Maximum tool diameter for guide work: Ø250 mm Nsdpfx Aex Igzqemtjlh TENONING: - Sliding tenoning carriage 760x500 mm Equipped with graduated transverse stop with adjustable end stop Adjustable support arms ensure complete rigidity of the carriage rail - Adjustable tool approach table with eccentric clamp - Angular adjustment of the fence with graduation from 0 to 45° - Tenoning hood guard - Maximum tenoning tool diameter: Ø350 mm Equipped with a power feeder: - Brand: Polymatic Year: 1996 - Power: 0.75 kW - 3 rubber feed rollers - 2 feed speeds (mechanical and electrical) OTHER CHARACTERISTICS: - Electrical supply: 380V, 3-phase + T, 50Hz - Manual star-delta starting - Installed power: 6.25 kW - Main motor power: 5.5 kW (7.5 HP) - Lockable isolator, emergency stop button - Safety guard for guide operations - Dust extraction inlet on spindle hood Ø120 mm Lower suction port Ø120 mm Dimensions (LxWxH): 270x165x165 cm Weight: 800 kg

Condition: good (used), wood impregnation line Nsdpfx Amezwx Niotjlh

Year of construction: 2007, condition: excellent (used), AUTOMATIC BENETA VENUS BANDSAW – USED Beneta Venus model bandsaw for cutting curves and straight lines, automatic with an outfeed table – used. - Vertical axis X: 1600 mm - Vertical axis Y: 450 mm - Maximum speed of axis X: 50 m/min - Maximum speed of axis Y: 50 m/min - Total installed electrical power: 6.5 kW - Maximum installed pressure: 6-7 bar - Brushless motor, axis X: 6 Nm - Brushless motor, axis Y: 2.3 Nm - Digital control - Standard cutting length: 0-1500 mm Njdehknb Dspfx Amtelh - Standard cutting height: 0-120 mm - Cast iron flywheels diameter: 800 mm - Bandsaw blade dimensions: Minimum length 5330 mm, maximum length 5350 mm, minimum width 13 mm, maximum width 20 mm - Motor power: 7.5 HP - Machine dimensions: 3,900 x 3,500 x 2,500 h, weight 4,650 kg

Condition: good (used), Code: 0473 Brand: SCHNEIDER - GERMANY Model: SLK 300 - CE Standard Universal circular saw for cutting large-sized beams, wooden roofs, wooden walls, laminated beams and various applications - CE Standard Automatic workpiece feed with speed variator Blade diameter mm 800 Blade inclination 90 - 30 degrees with display Manual table rotation from 0 to 180° Cutting height at 90 degrees mm 300 Cutting height at 30 degrees mm 150 Cutting width mm 900 Nljdpfx Amozquw Aetsh Motor power Hp 15 (Kw 11) Automatic raising of the blade with bimanual control Visualizing laser cutting light N° 2 pneumatic cylinders for clamping pieces with wheels Machine cover with manual opening Protection hood for longitudinal cuts Table size 1560 x 1560 mm Table height mm 940 Infeed roller conveyor mm 6000 x 650 Outfeed roller conveyor mm 6000 x 650 N° 2 suction inlets mm 150 Compressed air 7 Atm Overall dimensions of disassembled machine : Machine mm 3200 x 2200 x 2200 h - N° 1 Roller conveyor mm 6000 x 650 x 1050 h - N° 1 Roller conveyor mm 6000 x 650 x 1050 h Weight kg 2200

Condition: excellent (used), Year of construction: 1989, RANDEK SP700 cut saw manufacture Randek Sweden Year 1989 SN 1989-02-08 in good condition, cleaned and checked Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw Nlsdeivaryepfx Amtoh • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjustable pneumatic stoppers . Length 6,25m out feeding roller conveyor 4,10m Complete line: 11,5m technical information under subject of correction

Condition: good (used), wood sawdust compressor, 16.5 kW, 50 Hz Nedpszz Rqgsfx Amtslh

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 19 kg, cutting height (max.): 305 mm, warranty duration: 24 months, input voltage: 230 V, torque: 5 Nm, rotational speed (min.): 1,420 rpm, rotational speed (max.): 1,420 rpm, fuel type: electric, input frequency: 50 Hz, input current: 5 A, cable length: 4,000 mm, protection type (IP code): IP55, saw band length: 1,710 mm, saw band speed: 1,500 mm/s, control type: manual, actuation type: manual, mobility: mobile, Equipment: CE marking, documentation/manual, NEW | 100% EUROPEAN PRODUCTION | DIRECT FROM MANUFACTURER The PBS300 is a professional portable bandsaw for beams, structural timber, solid wood and complex wooden components. With a cutting height of 305 mm and a weight of only 19 kg, it combines substantial cutting capacity with excellent mobility. Compatible with 6–13 mm blades, it handles tight curves, intricate contours and precise straight cuts in large timber sections. Ideal for carpentry, timber framing, joinery, workshops and construction sites. A practical tool for independent craftsmen and larger businesses alike, ready whenever precision and efficient cutting are required. BUILT ON EXPERIENCE Drawing on over 10 years of industry experience and feedback from thousands of direct customers worldwide, Astra Pro develops purpose-built woodworking tools. Our philosophy: professional equipment should be precise, reliable, easy to operate and affordable, without unnecessary complexity or investment. PRECISION CAST ALUMINIUM WHEELS The Ø203 mm wheels are cast from EN AC-43300 (AlSi9Mg) aluminium alloy according to EN 1706, with optimised mass distribution and reinforced geometry. Precision turning and dynamic balancing reduce rotational imbalance and vibration, supporting smooth operation, stable blade tracking and accurate cutting. DUAL BLADE GUIDANCE SYSTEM On one side, steel-and-aluminium guides feature precision EDM-machined grooves. Their 180° reversible design allows a second groove to be used, extending service life. On the opposite side, triple-bearing guides with standard 696 C3 bearings provide controlled blade support with low rolling friction. Together, both systems help reduce blade heating, friction and premature wear, supporting accuracy and longer blade life. ENGINEERED SIMPLICITY Blade tensioning and lower-wheel tracking adjustment are integrated into one mechanical system. Setup is intuitive, precise and straightforward. The frame uses carefully selected aluminium alloys, precision TIG-welded for durable joints. Potential failure points are minimised through thoughtful engineering. Routine maintenance is largely limited to cleaning, inspection and adjustment. INDUSTRIAL DRIVE & SERVICE A 0.75 kW industrial induction motor, 230 V / 50 Hz, S1 continuous duty, delivers dependable performance with low maintenance requirements. Standard blades, 696 C3 bearings and replaceable motor capacitors are locally available, helping minimise downtime. Original spares and accessories are supplied by Astra Pro. CUSTOMER FEEDBACK "Game changer for us." "What takes a lot of time and energy now is a 7-minute cut. I absolutely love it." "We use it all the time." "Amazed how it improved work." TECHNICAL DATA Model: PBS300 / T305XT Condition: New Cutting height: 305 mm Wheels: Ø203 mm, EN AC-43300, EN 1706 Blade: 1710–1712 × 0.65 mm Widths: 6 / 8 / 10 / 13 mm Nlsdsv Tcuxspfx Amtoh Guides: Reversible EDM grooves; triple-bearing 696 C3 Motor: 0.75 kW, 230 V / 50 Hz, S1 Weight: 19 kg 100% EUROPEAN PRODUCTION Every machine is manufactured entirely in Europe and individually hand-assembled in Poland. Declared dispatch: 3 working days from order confirmation. DISTRIBUTION OPPORTUNITIES Specialist dealers can expand their range with a distinctive machine addressing real, underserved market needs.

Condition: good (used), functionality: fully functional, Chain mortiser LS 102 Rated power: 1800 W Rated voltage: 230 V, 50 Hz Rated idle speed: 4050 rpm Mortising depth: 100/150 mm (depending on the chain set) Adjustable cross stop, steplessly adjustable from 8 to 150 mm Weight of the base unit: approx. 9 kg Slotting machine SG 500: Slotting depth, vertical/horizontal: 500 mm Slot width: 10-17 mm Slot length: 50 mm Weight: approx. 32 kg including guide rail + chain Guide frame FG 150 for mortising depth up to 140 mm Nlsdezi A Elspfx Amtsh

Condition: used, used, excellent condition, lightly used Manufacturer: Mafell Model: MKS 165 E CE type-certified Motor: 2.7 kW Brake motor Cutting height: 165 mm Blade diameter: 410 mm New price approx. €4,000.00 Warehouse location: 97447 Gerolzhofen, loaded free on truck, unpacked Sold as seen in current condition, Nlodpfx Ameycxhkotoh without guarantee or warranty

Condition: excellent (used), Net price: €3,350 Makita 5500s tenon cutter in near-new condition. You will receive an invoice with VAT. Shipping via freight forwarder is possible. Nlsdpfxowf I Aqj Amteh Price excludes VAT, ex-works Haldensleben.

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. Nljdpfezhnafjx Amtjh - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey