Used Joinery for sale (142)

Condition: excellent (used), CATALOGUE NUMBER 6907 TECHNICAL DATA - Loading hopper inlet at the top: 1980x1050mm - Loading hopper inlet at the bottom: 980x1050mm - Discharge for shredded wood: diameter 210mm - Rotor working width: 980mm Dwsdskvn T Njpfx Agcef - Main motor: 30kW - Pump motor: 1.1kW - Number of knives: 36 pcs - Knife size: 40x40mm - Screen: 18mm - Pusher drawer - Electric auto-reverse - Dimensions (L/W/H): 2100x2030x2070mm - Weight: approx. 3500kg – French-made – Similar to WEIMA WL 10 – New knives installed – Auto-reverse – Pusher drawer – Very good condition – Used shredder Net price: 88,900 PLN Net price: 2,160 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (in case of major rate fluctuations, price may change)

Condition: good (used), Year of construction: 2007, Tigerstop under-table crosscut saw with automatic length stop Dwedsx Ehlvspfx Agcjf MUK 500 under-table crosscut saw with 500 mm saw blade and 5.5 kW motor power Tigerstop automatic length stop with a working length of 6,800 mm and closed roller table

Condition: used, SINGLE PARVEAU TENONING MACHINE WITH DIGITAL POSITIONING TYPE 920 WITH 4HP SAW MOTOR 10HP ROUTER WITH 300MM SHAFT 10HP ROUTER WITH 300MM SHAFT Dedpfx Ajv Txrgjgcjwf

Condition: used, Year of construction: 2006, functionality: fully functional, Hundegger K2 450 Joinery Machine (UF5) with good equipment, well-maintained and reliable. For sale is a Hundegger K2 joinery machine in good, regularly serviced condition. The machine comes from a well-kept operational environment and has always been properly maintained and cleaned. Manufacturer: Hundegger Model: K2-450 (UF5) Year of manufacture: 2006 Equipment: - Machine length: 11.76 m - Infeed: 8.51 m - Max. timber length infeed: 14.5 m - Max. timber length outfeed: 13.0 m Dsdox Azrkjpfx Agcjwf - Colour: RAL 5012 blue - Infeed cross conveyor: 6 strands, horizontal, 2.2 m with flat bar chain - Infeed strand with shaft extension 2.2 m - Extendable timber outfeed - Under-table swiveling cross-cut saw - Alternative disposal via bin - Control for disposal device - Universal 5-axis milling unit UF5 - Roller cutter - Finger jointing cutter - Dovetail cutter - Combination support for vertically working tools - Drilling unit 2.2 kW - Drilling unit 3.0 kW - Finger jointing cutter - Combination support for horizontally working tools - Drilling unit 2.2 kW - Swiveling drilling unit - Slotting unit, 900 mm, double-sided guide - Longitudinal and cross-groove milling unit - Marking and labeling device integrated in table - Hydraulic beam turning station - Roller conveyor with pusher, 5.30 m - Network connection Available from: Autumn 2026 Location: Austria Price: on request All information subject to change; prior sale reserved. Sale ex location. No warranty or guarantee. Inspection and test run available by arrangement. If interested, just get in touch – we are happy to answer any further questions.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Hundegger Speed Cut SC1 CNC Dwsdpfx Asxftalegcsf 2005 vintage, in good technical condition, looking for a new owner. Excellent for the production of nailed sheet metal roofs. Videos show the machine in operation.

Condition: used, Year of construction: 2010, functionality: fully functional, CNC Production Line for Log Construction FORMA MBL The FORMA MBL CNC line is designed for speedy and high-precision machining of wall elements for both glulam and solid log houses. The system operates on Cadwork (IFC-based) software. Material Capacity • Beam thickness: 120–240 mm • Beam height: 120–240 mm • Maximum workpiece length: 7.5 m The line is equipped with a hydraulic lifter and an automatic infeed system for efficient and continuous material handling. Processing Capabilities Drilling Operations • Vertical drilling for electrical conduits, dowels, and threaded rods Dwodpfoxyf Evsx Agcsf • Horizontal drilling for electrical wiring, switch boxes, and socket recesses Corner Joint Machining Modules • Dovetail corner joint module • Cross corner joint module Sawing Modules • Horizontal saw unit for beam splitting and machining of window and door openings • Vertical cross-cut saw unit for trimming and end-cutting components Milling Operations • Electrical channel milling (cable grooves) • Sliding-beam milling for window openings Additional machining functions are illustrated in the attached graphic and photo documentation.

Condition: excellent (used), Year of construction: 2021, operating hours: 4,000 h, functionality: fully functional, Equipment: type plate available, X-motion plus control: • with rotatable 15" smartouch monitor • unlimited memory space for operator-defined work programs • precise adjustment of distance parameters • simple and self-explanatory symbols for units and functions Dsdpfx Agoxx Aiiscowf • glue temperature adjustment, automatic glue temperature reduction in standby mode • selection of units, precise adjustment of position-controlled and motor-set units (adjustment accuracy 1/100 mm) from the control panel • optimization of edge overhang at the front and rear of panels during pre-trimming • clear error messages FORMAT 4 is a brand of FELDER KG

Condition: excellent (used), IM Very good condition. Djdpfsw Ebwuox Agcowf

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Blockhouse milling machine BL100A, completely overhauled with factory warranty For log thickness up to 140mm, construction height up to 200mm, machining length up to 9.0m • Infeed table (timing belt cross conveyor) and entry table for timber length 9m • Blockhouse milling machine BL100A – 4-side milling machine with hydro-pneumatic feed, 2x4kW / 2x3kW for cross-section approx. 140x220mm • Carbide insert tools for wall thickness approx. 40 – 100mm included • End groove milling unit 3.0kW with cutter B=21-40mm • Drilling device with drill guide and drill bit D=20mm • Integrated under-table crosscut saw 4.0kW, saw blade D=500mm • Workpiece clamping pneumatic, with horizontal clamping jaws • Outfeed table 9m with pusher device and material storage table 6x1.5m Djdpsxxhwljfx Agcswf • Servo slider positioning system with IPC control and IITO control software • Label printer for component marking, laser printer for production list printouts • Excellent condition, factory-refurbished and fully serviced, with parts warranty, ready for operation • Price & delivery time on request. Subject to prior sale and all rights reserved

Condition: like new (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 12762, cutting height (max.): 300 mm, Fully automatic wood infeed Infeed roller conveyor Infeed and loading cross conveyor Under-table pivot cross-cut saw 11 kW 5-axis universal milling unit – UF5 Combination support for vertically operating tools Drilling unit 2.2 kW – vertical drilling direction Combination support for horizontally operating tools Reinforced drilling unit (3.0 kW) horizontal drilling direction Slotting unit 7.5 kW Dwodpjxxa Dwofx Agcjf Rear marking device (on the stop side) Fully automatic beam turning station, hydraulic Transport and positioning device "two-hand system" Electronic control with Hundegger production software Roller conveyor for wood outfeed with ejector 5-arm timber rack Safety devices and guards Refined machine surface Extension for infeed cross conveyor Infeed roller conveyor for timber length 13 m 5-axis universal milling unit – UF5 Revolver milling unit – vertical from above Remote maintenance possible Control cabinet special arrangement Control unit for extraction with operating buttons Extension roller conveyor 7.10 m without drive Raising and lowering safety baffle plate

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, Krüsimatic G2 Joinery Center – Used, Completely Overhauled Condition & Overhaul The machine has been completely overhauled by Krüsi Maschinenbau AG. It will receive a new control system, regulators, servo motors, and cabling – with a 12-month warranty on the mechanics and new components. Technical Specifications • Wood clearance: max. 200 x 320 mm • Feed-in length: 10,000 mm • Feed-out length: 10,000 mm • Supply voltage: 3 x 400 V / 50 Hz • Fuse protection: 3 x 63 A (provided by customer) Dwodpfx Agjwb Ev Hocjf • Pneumatic pressure: ≥ 8 bar • Air consumption: 10 – 15 m³/h • Machine control: IST software / Abb3d • Interface: BTL-compatible Processing units Gate 1: • 5-axis sawing unit (angle-limited) • 4-axis milling unit with 5-axis spindle head (horizontal) + marker • 4-axis notching unit with 2-axis spindle head (vertical) • Drilling unit with two horizontal tool holders • Chain slotting unit Gate 2: • Two Chalet milling motors (vertical) • Two Chalet milling motors (horizontal) • Two drilling units (horizontal) • Grooving unit (horizontal & vertical) Accessories • Extensive tooling included • Two compressed air tanks to reduce the weight of the gangs The perfect opportunity for carpentry shops, timber construction companies, and joinery centers that value reliability and precision – with a factory warranty

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11174, For sale: our used Hundegger fully automatic joinery machine, model K2, year of manufacture 2001 - Infeed and loading cross conveyor (6-strand) - Underslung pivoting crosscut saw - Universal milling unit (UF4) - Combination support for vertically operating tools - Drilling unit 2.2 kW - vertical - Drilling unit 3 kW - vertical - Vertical finger-joint cutter 7.5 kW - Combination support for horizontally operating tools - Drilling unit 2.2 kW - Drilling unit 2.2 kW - horizontally swiveling - Slotting unit - Rear marking unit - Underside marking and labeling device - Fully automatic beam-turning station - Dovetail cutter - Transport and positioning device "two-hand system" - Electronic control - 5.30 m roller conveyor extension - 6-arm output table - Height-adjustable safety stop plate - AWF extension + timber feeder 13 m - Tooling included - Further details and accessories as shown in photos and available on request. The machine is fully operational and can be inspected by appointment. Available from Spring 2026. All documentation is present, regularly serviced by Hundegger, sold without refurbishment. Dismantling and collection by the buyer. Dedpfx Agexvychjcjwf The sale is made as a used machine with the exclusion of any warranty or guarantee.

Condition: excellent (used), functionality: fully functional, cutting height (max.): 140 mm, cutting width (max.): 350 mm, saw blade diameter: 350 mm, overall weight: 3,200 kg, The machine in very good technical condition, ready to work. The machine works very quietly. TECHNICAL PARAMETERS: - width of track 350mm - shaft width 640mm - max disc diameter 350mm - blade hole diameter 70mm - max cutting height 140mm FROM TOP: - ratchets - sliding roller, smooth, metal - pawls - sliding roller, smooth, metal - saw shaft + insert for short parts - 2 sliding rollers smooth, metal bottom: - guide bar - pawls - track - central lubrication - diameter of the extraction stub 200mm - smooth regulation of feed speed - feed motor 1,1 kW - main motor 35 kW Machine dimensions: - Length: 2000 mm - Width: 1550 mm - Height: 1550 mm - Weight: 3200 kg You are welcome to test the machine on site. Dwsdpfxeuzm Ate Agcjf Where will you see our machines? JBS CARPENTRY MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE There is a possibility to test the machine on site The possibility of financing the machine through leasing or installments. WE ORGANIZE THE TRANSPORT OF MACHINES !

Condition: excellent (used), Year of construction: 2015, operating hours: 3,200 h, For sale: Weinmann WBZ 160/13 Powersix joinery line, year of manufacture 2015, in very good condition. The system was operated exclusively for our own joinery production. Inspection by appointment. Dsdexclhcopfx Agcjwf

Condition: ready for operation (used), Year of construction: 1999, functionality: limited functionality, Equipment Joinery Machine K2 Cross Infeed Conveyor 5-strand 2.2 m Extendable Timber Rack Undertable Swing Cut-off Saw with Open Base Control System for Cut-off Disposal Universal Milling Unit Roller Cutter Finger Cutter Dovetail Cutter Combination Support for Vertically Operating Tools Drilling Device Combination Support for Horizontally Operating Tools Drilling Device 1 Drilling Device 2 Slotting Device Marking Device (Stop Side) Fully Automatic Beam Turning Station Dwsdpfx Aexrkkzegcsf Extension Table 7.1 m Transfer Cross Conveyor 6-strand 6-arm Depositing Table Planing Machine HMC Fully Automatic 4-sided Planing and Chamfering Planer Motors 7 kW The machine can be inspected at any time upon request. The buyer is responsible for dismantling and transportation.

Condition: used, The sale is due to insolvency. The entire system was purchased in 2021 and was only in operation for approximately 3 years. Manufacturer: Randek (Sweden) Year of manufacture: 2021 1. Saw Type: SPL 728 X04 Control: Beckhoff, touchscreen Languages: See photos Mitre cuts: 0°–360° Bevel cuts: 90°–28° Max. material thickness: 250 mm Saw blade diameter: 700 mm Power: 7.5 kW 2. Infeed unit with stacking device, right Type: UV130F2X05 Length: 13 m Lifting table: 4,000 kg Dsdpfx Aexqpqkjgcewf 3. Outfeed unit with stacking device, left Type: IH106F1X01 Length: 10.60 m Lifting table: 5,500 kg 4. Label printer Brand: ZEBRA Overall system dimensions approx.: Length 24 m x width 3 m

Condition: good (used), Year of construction: 1996, KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 S/N 431 Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass - cutting to length - horizontal- and vertical milling of the necks / grooves in one clamping - drilling - milling the face grooves workpiece: Dedpfx Asu Uh T Dsgcowf - Cutting height max. 200nn - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for operation, with contactor control, motors protected by thermal relays. Electrical equipment for voltage 380 V, 50 Hz, with protective bonnets, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely adjustable. Completely wired and installed, including air maintenance unit. Stains with a thickness of more than 14 cm must be processed in two tensions. Such patches have to be re-milled by the amount of the extra thickness. Machine protection bonnets over the moving parts with gas spring weight compensation Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analogue dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide tipped with chip depth limiter (synchronous operation) Adjustable riving knife Motor speed min 1 / 2900 Power kW 2,2 2. CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal milling unit Cutter Ø 180mm cutter width max.130mm from cutter width 60 mm use only aluminium alloy cutters with reversible cutting edges 2 motors hydro-pneumatic feed kW each 2,2 Hydropneumatic feed Rapid traverse and working feed infinitely adjustable 3. drilling unit: Manual feed Spindle adjustment with analogue dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1,8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Fraser- Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3,0 2 V-belts SPZ 9,5x1000 La Pneumatic On-site operating pressure min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: used, functionality: fully functional, "One-man device": set the external dimensions, insert the profiles, compensate for height deviations, and weld seamlessly on both sides. Whether you are producing steel windows, fire doors, or angle steel frames: with the CREA-SWISS all-in-one welding fixture, operators can fabricate perfect frames quickly, with high precision, and outstanding profitability. Swiss welding table for steel joinery fabrication. "One-man device": set external dimensions, insert profiles, compensate for height differences, and carry out complete welding on both sides in a single setup. Be it steel windows, fire doors, or angle steel door frames: with the CREA-SWISS frame welding jig, any operator can fabricate excellent frames rapidly, accurately, and economically. The welding fixture setup is completed within minutes. The frame width is precisely aligned along the longitudinal axis using a reduction gearbox. The measurement is clearly visible on an ergonomically positioned digital display. Frame height is adjusted directly at the corner stops, which incorporate integrated measurement scales. Technical Data Maximum frame size: 3000 mm x 2400 mm Minimum frame size: 470 x 610 (510) mm Profile height: up to 115 mm Height tolerance compensation: -1 mm to +1 mm Weight: 280 kg Advantages: • One-person operation • Full welding in a single clamping • Highly precise frame alignment • Accurate mitre adjustment • Rotatable along the longitudinal axis • Mobile workstation on casters • Optional crossbar supports for door leafs with transoms • Universal for all frame types Djdpfx Agoxpfhcocewf More information: creametal.de/rahmenschweisslehre/

Condition: excellent (used), Year of construction: 2020, Machines included in the line 1. VANHOLD M 300 tracked multi-blade saw Dwedpfjw Nhflox Agcjf 2. Outfeed belt behind the multi-blade saw 3. Transfer belt to the automatic feeder with knockers 4. VANHOLD Speed Master automatic feeder 5. VANHOLD Powermax 2300_5 four-sided planer Detailed technical specifications of the line – available on request via email. The price of the new line is 100,000 euros.

Condition: used, Year of construction: 2002, functionality: fully functional, cutting width (max.): 625 mm, Hundegger joinery system with mechanization Dwjdpfxsv Ubtco Agcsf 5 axes Working width: 625 mm with tools

Condition: excellent (used), Year of construction: 2009, BIESSE ROVER C9.65 FT Conf 2 MACHINING CENTER XP6OO control system entirely PC-based - Division into 2 shaping areas and 8 X-blocking zones 2 300m3/h vacuum pumps - Configuration 1 X=6450mm Y= 1860mm C2-A1 composition Dwodpfx Ajtt Sqdegcef 12kw electro-spindle, Iso30 air-cooled socket -360° pivoting operator device - C axis 10-position revolver tool magazine on Z carriage Predisposition for mechanical copier - 5 ISO30 tool holders with spring clamps Automatic lubrication system - Diagnostic video - Oil bath sawing unit for 215mm blade Extra charge for extension of reticular work surface to 2100mm in Y direction

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, total length: 9,100 mm, total width: 3,600 mm, Our company is a manufacturer of machines and devices for prefabrication plants. We produce fixed assembly tables, rotary tables, butterfly tables and complete production lines We offer a new assembly table measuring 3.6m x 9.0m - Powder coated construction - Table covered with plywood board with impact-resistant coating Dedpfx Asvv Rv Asgcswf - holes for mounting SD-01 pressure actuators - removable and adjustable limiting pins - modular construction for self-assembly (one pallet) - low transport costs throughout Europe

Condition: good (used), Year of construction: 1996, functionality: fully functional, KRÜSI chalet building machine / log house production line type CM 40 Year of construction 1996 Krüsi CM40, consisting of the following components: Circular saw ( cross-cut saw ) Horizontal and vertical log house router Groove milling machine (horizontal) boring mill Infeed table 6m Outfeed table 6 m Dsdpfx Agevfv Tfscowf KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE-marked Condition: good, technically checked and cleaned / ready for use Functional principle Processing of wood for chalet construction / log house construction The beams can be processed in a single operation - Cutting to length - Horizontal and vertical milling of necks / grooves in one clamping operation - Drilling - Milling the face grooves Workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for maximum machining accuracy. Slide guidance with dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for use, with contactor control, motors protected by thermal relay. Electrical equipment for voltage 380 V, 50 Hz, with protective covers, Central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed, electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely variable. Fully wired and installed, including air maintenance unit. Patches with a thickness of more than 14 cm must be processed in two tensions. Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analog dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide-tipped with cutting depth limiter (synchronous operation) Adjustable riving knife Motor speed min. 1 / 2900 Power kW 2.2 2nd CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal trimming unit Milling cutter Ø 180mm Milling cutter width max.130mm From cutter width 60 mm only use aluminum alloy cutters with reversible cutting edges 2 hydropneumatic feed motors kW 2.2 each Hydropneumatic feed Rapid traverse and work feed infinitely adjustable 3rd drilling unit: Manual feed Spindle adjustment with analog dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1.8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Cutter Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatic Operating pressure on site min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: good (used), Year of construction: 2011, Fully automatic wood infeed with feed roller conveyor Extension of transverse feed conveyor and feed roller conveyor for timber lengths up to 13 m Transverse loading and feed conveyor Under-table swing cross-cut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Dodpfxewuppwj Agcowf Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse grooving mill Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector 5-arm wood rack Safety devices and protective guards

Condition: excellent (used), Year of construction: 2000, Schmidler CNC carpentry line - Model: SAB 4 R - Year of production 2000 - DOS-based software, production files in BTL format - Line length 30 meters - Additionally a spare saw Dwodpfoulvldex Agcsf - Video available The line is 100 % FUNCTIONAL