Used Joiners Circular Saw for sale (6,164)

Condition: good (used), Year of construction: 2011, Sawblade tiltable 46 ° Length of the rolling table 3000 mm Njdpfx Aiezwqc Uouewk cutting width 1000 mm Motor output 7,5 kW Cutting height 200 mm Saw blade diameter 550 mm Speed 2000-6000 U/min. weight of the machine ca. 1300 kg

Condition: used, Year of construction: 1995, machine/vehicle number: 20373, functionality: unexamined, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, overall weight: 127 kg, table height: 850 mm, Equipment: CE marking, saw blade guard, Scheppach table saw ts 4000, max. cutting height 90 mm, at 45° max. 60 mm, max. saw blade diameter 315 mm, tilting capability 0° to 45°, 4 kW (5.4 HP) motor, 2,000 mm sliding table, lifting and transport device, foldable table extension, tenoning attachment, SUVA saw blade guard, GS wood dust tested with CE mark, as inspected at location Seevetal, without transport, subject to prior sale. Nwsdpfsy N Sfqsx Aiujk

Condition: used, Year of construction: 1989, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, cutting height (max.): 130 mm, cutting width (max.): 230 mm, saw blade diameter: 380 mm, height adjustment type: electric, saw blade bore: 80 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,200 rpm, total length: 5,200 mm, total width: 2,500 mm, total height: 1,800 mm, overall weight: 4,300 kg, table height: 850 mm, Equipment: documentation/manual, rotational speed infinitely variable, saw blade guard, We are offering this used WEINIG KR 230 E high-performance parallel trimming saw with automatic return, manufactured in 1989. Additional equipment: - Electronic 1-axis adjustment with digital target/actual value display including subtraction electronics - Attachment sleeve for multi-blade cutting - Feed chain with screwed-on spikes - 2 lasers for indicating the saw blade position including adjustment spindle - Automatic cross and return conveyor - Central lubrication system Type: KR 230 E Year of manufacture: 1989 Machine No.: 24484 Serial No.: 91300 Order No.: 91307 Operating voltage: 380 V Frequency: 50 Hz Rated current: 50 A Wiring diagram No.: 862218 Nwsdpfszkhbbsx Aiujk Weight: approx. 4,300 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 1996, functionality: fully functional, Circular saw SICAR EXPRESS 32 year of construction 1996 S/N 800066 Manufacturer SICAR Italy Aluminum sliding carriage 1600mm Nwodpfx Aietw D Tbjusk main saw motor 5,5hp ( 4,0kW ) motor independent scoring motor 0,55kW Blades with 300/350/400 mm Cutting height of 110 mm at 90° and 80 mm at 45°. Manual tilt and height adjustment Inclination of main saw blade and scoring blade reaches 45° Extra ruler for angular cuts Workpiece hold-down device Top extraction also for 45° cuts Voltage 380 V, 50 Hz. CE marked 720 kg Technical data subject to change

Condition: good (used), Year of construction: 2010, Sawblade tiltable 46 ° Length of the rolling table 3000 mm cutting width 1300 mm Motor output 5,5 kW Cutting height 204 mm Saw blade diameter 550 mm Nsdpfx Ajzu Tlajiuowk Speed 2000-6000 U/min. weight of the machine ca. 1300 kg

Condition: used, functionality: fully functional, machine/vehicle number: 40711, Single jersey circular knitting machine, Mayer & Cie. model MV 1, machine number 40711. Made in Germany. NAMEPLATE DATA · Nominal diameter: 914 mm / 36 inch · Gauge: 28 E · Pitch: 0.91 mm · Number of needles: 3168 · Manufacturer: Mayer & Cie., Emil-Mayer-Straße 10, D-72461 Albstadt, Germany · No CE marking 36" DIAMETER WITH GAUGE 28. With 3168 needles, this machine has the highest needle count in the lot. A 36-inch diameter combined with a fine 28 E gauge is designed for wide-width production: mattress ticking, home textiles, shirting, and lightweight outerwear. EQUIPMENT FITTED · Phototex FM8 electronic fault scanner (ITE), CE marked · Senso+ lubricator by EQ Systeme, 5-liter tank · Air filter-regulator · Control panel with start and stop push-button station · Hengstler counters · Top creel CONDITION Machine assembled, currently protected with film for storage. Viewing, inspection, and a running test on-site can be arranged. DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · Location: Albacete, Spain Nodezvn S Ropfx Aiujwk

Condition: good (used), Year of construction: 1995, functionality: fully functional, saw blade diameter: 400 mm, max blade diameter 400 mm cutting height adjustment angle adjustment 0″- 45″ spindle diameter 30 mm blade guard max. cutting width with guide bar 1270 mm 2 types of rotation speed 3000 / 4500rpm table top dimensions 1020 x 1120 mm worktop extension worktop extension undercutter max diameter of undercutting saw blade 130 mm diameter of undercutter spindle 20 mm undercutter motor 0,75 kW motor 4 kW overall dimensions L/W/H 2930 x 2600 x 1450 mm Nwodpfx Aijqwduxoujk weight 711 kg

Condition: excellent (used), Year of construction: 1987, Circular saw Manufacturer: Ulmia Type: 1712 Year of manufacture: 1987 Table: 800 x 710 mm Saw blade diameter: 350 mm Njdpfxsztnx Eo Aiuswk Cutting height: 125 mm Power: 3 kW Bevel angle: 45° Motor brake: Yes Weight: approx. 500 kg

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 6858, Jumberca MIL model double-sided circular knitting machine, machine number 6858, year 2000. Manufactured in Spain by Jumberca S.A. (Badalona, Barcelona). CE marked. Nwodjzvhzxopfx Aiujk NAMEPLATE DATA: · Diameter: 33 inches · Gauge: GG 18 · Number of needles: 1860 + 1860 · Maximum speed: 20 rpm · Power: 8.4 kW · Voltage: 380 V · Frequency: 50-60 Hz · Maximum air pressure: 6 bar · Weight: 2,890 kg · CE marking APPLICATION: Large-diameter double-sided knitted fabric: interlock, rib, fabrics for mattresses and home textiles. INSTALLED EQUIPMENT: · Control cabinet with start/stop buttons · Electronic lubricator Memminger-IRO Pulsonic 5.2, with oil · Upper fillet POWER SUPPLY: 50-60 Hz. The nameplate indicates 50-60 Hz, so the machine is suitable for both European networks and 60 Hz networks without frequency conversion. CONDITION: Complete and assembled machine. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT: · Weight according to nameplate: 2,890 kg · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · Location: Albacete, Spain.

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm Nodpfxeztavvo Aiujwk - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: used, functionality: fully functional, machine/vehicle number: 34554, Mayer & Cie. RELANIT S single-jersey circular knitting machine. Mayer & Cie. single-jersey circular knitting machine, model RELANIT S, machine number 34554. Manufactured in Germany. NAMEPLATE DATA Nominal diameter: 762 mm / 30 inches Gauge: 28 E Pitch: 0.91 mm Number of needles: 2,664 Manufacturer: Mayer & Cie. Maschinenfabrik, Emil-Mayer-Straße 10, Albstadt (Germany) The nameplate indicates “Made in Western Germany” APPLICATION Single-jersey fabric in fine gauge, suitable for shirts, underwear, nightwear, lightweight outerwear, and fine technical fabrics. Njdpfx Aezvhx Reiuowk RELANIT TECHNOLOGY Relative motion cam system, which reduces friction, extends needle life, and reduces yarn tension. INSTALLED EQUIPMENT REIVAX DC-3 electronic defect detector (Taube, Mataró), with sensitivity, current, defect, needle stroke, memory, stop, and reset warnings. OLI-FOX lubricator (Talleres Guerra, Mataró). Analog control panel with A / B / C revolution display. Autonics FX4S counter. Complete upper rail installed on the machine. CONDITION Complete and assembled machine. It does not need to be disassembled to be removed from the warehouse. Currently, fabric from the last production run is still in the machine. A visit can be arranged for an on-site inspection and operational test. YEAR Approximately 1990, based on the serial number and the nameplate. CE MARKING The machine does not have CE marking. For its commissioning within the European Union, the buyer must carry out the corresponding conformity assessment and, if necessary, the required adaptations. DIMENSIONS AND TRANSPORT Approximate dimensions: Length: 2.70 m Width: 2.00 m Height: 2.70 m Disassembly: No disassembly required Location: Albacete, Spain

Condition: excellent (used), Year of construction: 2016, Format 4 Kappa 550 Positioning control e-motion – TFT screen Year of manufacture: 2016 320 cm sliding table 5.5 kW motor with brake Nedpsx Rugtefx Aiuewk Scoring unit control Max cutting height: 200 mm Saw blade: 250 - 550 mm Speeds: 3000 / 4000 / 5000 rpm Scoring blade rotation speed: 9000 rpm Motorized rip fence Saw blade tilting up to 45 degrees, single-sided Electric height adjustment Operator panel at eye level Crosscut fence with digital display Movable support rail with digital angle display Crosscut fence with length compensation Extraction connection: 120 mm and 100 mm Extension arm with swing-away function Cutting width: 1348 mm Crosscut fence up to 3200 mm Control station on sliding table Dimensions (without extension arm): 3400 x 2200 mm Weight: 1300 kg

Condition: used, Year of construction: 2023, gebraucht 2023 6246 prompt, Zwischenverkauf v Italien 2970 € 1 300 mm 300 x (2)2,5 x 32 mm 33/66 U/Min 45 ° Nsdpfx Aijy Dh Ikjujwk 45 ° rund 102 mm, Quadratprofi rund 90 mm, Quadratprofil rund 80 mm, Quadratprofil 500 mm 1050 mm 990 mm 135 kg demo machine / mint condition net price vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equipment saw blade protection material gauge pedestal 1 saw blade operating manual in German or English BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Kaltenbach KKS 450 U metal cutting circular saw (2021) Manufacturer: Kaltenbach Type: KKS 450 U Year of manufacture: 2021 Condition: used, very good Clamping, sawing, retraction, opening – all easily controlled with the push of a button Semi-automatic miter circular saw Working range 150 mm Saw blade diameter up to 450 mm Miter adjustment 180° Adjustment of the cutting height via push button Two cutting speeds Scope of delivery: - Documentation - 2m infeed roller conveyor - 2m outfeed roller conveyor with digital material stop Njdpfozwhwvox Aiujwk - 2x saw blades

Condition: good (used), Year of construction: 1994, operating hours: 1,000 h, functionality: fully functional, saw blade diameter: 550 mm, cutting range round steel at 90°: 200 mm, type of input current: AC, rotational speed (min.): 2,800 rpm, rotational speed (max.): 2,800 rpm, overall weight: 1,000 kg, cutting diameter: 200 mm, Barely used aluminum circular saw with length measurement on the infeed conveyor. BRAND: ELUMATEC. DRIVE: VIA AIR COMPRESSOR. Saw blade diameter: 550. Maximum cutting length: 200 mm at 90 degrees. Offer includes infeed conveyors and length measurement system. Nodpfjzavzvsx Aiuewk A stable loading device is available.

Condition: excellent (used), Catalogue number 7940 TECHNICAL DATA - Max. saw blade diameter: 500mm - Spindle diameter: 30mm - Blade guard included - Hydraulic blade feed - Cutting height: 140mm - Main motor: 4.4kW - Table size (L/W): 570x870mm - Table height from base: 750mm - Roller tables: 2 pcs - Infeed roller table: 1170mm – Outfeed roller table: 1210mm - Sliding roller width: 600mm - Overall dimensions (without roller tables) L/W/H: 1040x820x900mm - Weight: approx. 570kg ADVANTAGES – Made in Germany – 2 roller tables – Pneumatic saw blade stroke Nwsdpfx Aijztzc Djujk – Used saw in perfect condition Net price: 13,900 PLN Net price: 3,300 EUR (based on exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 213, functionality: fully functional, input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: three-phase, tilt adjustment saw blade: 45 °, For sale: a professional, Polish-made REMA Fx500 panel saw, manufactured in 2021. The machine is used in the furniture industry and excels at precisely cutting particleboard and MDF panels. The machine is in continuous operation, well-maintained, and regularly serviced. It operates on a single shift, on weekdays from 6:00 AM to 2:00 PM, and is not subjected to multi-shift operation. Key information and technical condition: Model: REMA Fx500 Year of manufacture: 2021 Power: 8.5 kW Power supply: 400V (3 phases), 50Hz Nwsdszvymaopfx Aiuok Scoring saw with a separate 0.75 kW motor Digital display Condition: Very good, fully functional, ready for immediate use Usage history: single-shift operation (Monday to Friday)

Condition: good (used), Year of construction: 1992, Panel saw with strip curtain max. cutting length 4200 mm max. cutting width approximately 1000 mm Motor 11 kW with electric width adjustment and digital display for width stop Nedpfxjzq Rh Ds Aiuowk new strips will be supplied available at the location in working condition

Condition: excellent (used), Year of construction: 1982, Ulmia table saw Type 1710 S Make No. 2943 Year of manufacture 1982 With sliding table Swivel saw blade Njdpfx Asr Elmwsiuowk Saw blade maximum diameter 250 mm Maximum cutting height 75 mm at 90° Maximum cutting height 52 mm at 45° Motor power 2.2 kW Sliding table Sliding table travel 750 mm Height to top edge of table 850 mm Suction connection diameter 100 mm Weight: 121 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Graule Type ZS 135 N crosscut and mitre circular saw for precise cross-cutting and mitre cutting of solid timber, mouldings and profiles with a high cutting height. It can be swivelled and tilted. Its robust construction and precise angle adjustment enable clean and repeatable cuts in craft work and workshop production. Ideal for all woodworking businesses. Includes base frame. Cutting height ~ 135 mm Cutting length ~ 460 mm Technical data: Njdpezrywqofx Aiujwk - Motor: 2 kW - Connection: 380 V

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Technical data – Elumatec TS 161 Machine type: Table saw Saw blade diameter: 280 mm Saw blade speed: 3,200 rpm Motor power: 1.1 kW Njdpfxszf Rllo Aiujwk Operating voltage: 400 V / 3~ / 50 Hz Swivel range: 0° to 45° to the left Cutting speed: 3,200 m/min Dimensions (L × W × H): approx. 650 × 750 × 1,300 mm Weight: approx. 96 kg

Condition: good (used), Year of construction: 1989, Saw blade diameter: 400 mm Cutting diameter: 130 mm Cutting range at 90°: flat – 260 x 60 mm Cutting range at 90°: square – 105 mm Cutting range at 45°: flat – 200 x 45 mm Cutting range at 45°: square – 90 mm Speed range, 2 steps: 1400 / 2800 rpm Drive power, pole-changing: 2 / 4 kW Machine dimensions (L x W x H): approx. 1100 x 1100 x 1700 mm Weight: approx. 850 kg Njdpfxsx Rvb Se Aiujwk Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Catalogue number 7956 TECHNICAL SPECIFICATIONS - Max main blade diameter: 350 mm - Blade bore diameter: 30 mm - Max cutting height: 90 mm - Main blade adjustable up/down and at angle - Blade guard included - With side carriage - Cutting length on carriage: 1300 mm - Cutting width on guide: 1340 mm - Main motor: 4 kW - Table dimensions: 1100 x 1030 mm - Table dimensions with extension: 2100 x 1840 mm Nedpfjztanrox Aiuswk - With scoring unit - Max scoring blade diameter: 100 mm - Scoring spindle diameter: 22 mm - Scoring motor: 0.55 kW - 3 spindle speeds: 4000, 5000, 6500 rpm - Dust extraction nozzle diameter: 125 mm - Dimensions (L x W x H): 3280 x 2340 x 1450 mm - Weight: 866 kg ADVANTAGES – Made in Poland – Blade guard included – With scoring unit – DTR technical documentation – Used saw, in very good condition Net price: 11900 PLN Net price: 2840 EUR (based on rate 4.2 EUR) (Prices may change with larger fluctuations)

Condition: good (used), Year of construction: 1990, functionality: fully functional, power: 4 kW (5.44 HP), max disc diameter 400mm blade adjustable up/down and at an angle spindle diameter 30mm blade guard max cutting height 135mm max width of cutting at the guide 700mm dimensions of table top 1020x900mm motor 4kW diameter of the suction nozzle 110mm Nodpfx Aoqwdwzsiuswk dimensions length/width/height 2140x1440x960mm weight 543kg

Condition: used, Striffler Type 2750-E double mitre circular saw for precise mitre and cross cuts in timber profiles, mouldings and frames. The machine is ideally suited to mass production in the window, door and furniture manufacturing sectors, thanks to its two pneumatically swivelling saw units and electronic positioning. Nwedpfx Aezryu Aoiuok Technical data: - Cutting length: approx. 2,200 mm - Mitre angle: 45° – 90° - Workpiece: max. 50 × 70 mm - Further details: See PDF