Used Saw Cuttingoffmachine for sale (5,755)

Condition: used, Year of construction: 2008, functionality: fully functional, manual in images. This is a 5 head horizontal Band Saw. It has tilting heads making it ideal for Feather Edge board production. Cedjzwh Rcjpfx Acperh It has 18KW motors. This machine comes with its own saw sharpening equipment and 10 new blades. All power feed wheels have been replaced with new. It runs on 30mm blades. All new power feed sprockets and fully DC braked.

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Csdpfjyh Hc Rex Acperh

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type Codpfx Aofv Hphocporh to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Max. panel length: 3700 mm Csdey In Apjpfx Acporh Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm Cjdpey In Avjfx Acporh No of Grippers: 9 Thin sheet loading: yes

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Codpewxmhlsfx Acpjrh Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Semi- automatic 82- 250 FPM Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: used, Vesto saw with two discs for sale Crodpfx Acotqt T Ispoh - electric motor: 2 x 7.5 kW, - complete with hydrostation, - electrical cabinet.

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Crjdpfxed H Hmhe Acpjh Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: used, Year of construction: 1973, 1 unit of EISELE LMSII miter and compound saw with roller conveyor, length approximately 580 cm, 2 roller supports, height-adjustable, self-dismantling Color: as shown in the pictures, according to the images and upon inspection Year of manufacture: 1973 Condition: used Location of the goods: workshop Payment method: prepayment by bank transfer Cjdpfx Aez I Nqpjcporh Shipping: self-collection only from the Bischofswiesen location

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 4912, functionality: fully functional, cutting height (max.): 500 mm, cutting width (max.): 770 mm, overall weight: 1,200 kg, saw band length: 5,540 mm, saw band width: 80 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting length up to feed roller: max. 225 mm Cutting length up to stop: max. 210 mm Cutting width up to column: max. 770 mm Cutting height: max. 500 mm Saw blade width: max. 80 mm Saw blade length: min. 5,380 mm Saw blade length: max. 5,540 mm Wheel diameter: 800 mm Table width: 1,200 mm Table length: 800 mm Table: Adjustable Csdpfjz Ea Iajx Acpjrh MACHINE DETAILS Dust extraction port diameter: 120 mm Voltage: 400 V Power consumption: 31 A Fuse: 63 A Main motor power: 15 kW Shipping packages: 1 unit Dimensions & Weight Dimensions (L x W x H): 1,800 x 2,100 x 2,380 mm Weight: 1,200 kg EQUIPMENT Adjustable table CE marking Feed rollers, automatic, electric

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 212062, functionality: fully functional, cutting height (max.): 1,550 mm, cutting width (max.): 3,300 mm, saw blade diameter: 250 mm, overall weight: 1,250 kg, plate height: 55 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum vertical cutting height: 1,550 mm Maximum horizontal cutting height: 1,510 mm Maximum cutting width: 3,300 mm Codpfxez Eav Re Acpjrh Maximum cutting depth: 55 mm Maximum saw blade diameter: 250 mm MACHINE DETAILS Voltage: 400 V Current consumption: 6 A Fuse rating: 16 A Power: 2.2 kW Shipping packages: 1 unit Dimensions & Weight Dimensions (L x W x H): 4,510 x 1,450 x 2,300 mm Unladen weight: 1,250 kg FEATURES CE marking Horizontal cutting Vertical cutting

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 31 504, functionality: fully functional, cutting height (max.): 2,200 mm, cutting width (max.): 5,300 mm, saw blade diameter: 300 mm, overall weight: 700 kg, plate height: 80 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum vertical cutting height: 2,200 mm Maximum horizontal cutting height: 2,100 mm Maximum cutting width: 5,300 mm Maximum cutting depth: 80 mm Saw blade diameter: 300 mm Saw blade bore: 30 mm MACHINE DETAILS Voltage: 400 V Current draw: 10 A Fuse rating: 16 A Power: 4.4 kW Shipping packages: 1 unit Dimensions & Weight Crodpfx Aez Ea Imscpeh Dimensions (L x W x H): 6,660 x 2,070 x 3,010 mm Weight: 700 kg FEATURES CE marking Horizontal cutting Vertical cutting

Condition: used, Year of construction: 2008, cutting width (max.): 2,200 mm, controller model: POWERCONTROL, cutting length (max.): 4,300 mm, Equipment: scorer, TECHNICAL DETAILS Maximum panel width: 2,200 mm Maximum panel length: 4,300 mm Maximum main saw blade overhang: 125 mm Maximum feed rate: 80 m/min Saw unit Maximum tool diameter, main saw: 450 mm Motor power, main saw: 13.5 kW Maximum tool diameter, scoring saw: 180 mm Cjdpfx Aez Eklvocperh Motor power, scoring saw: 2.2 kW MACHINE DETAILS Control system: POWERCONTROL Lift table, number of levels: 4 Clamping system, clamping jaws: 10 EQUIPMENT Lift table Saw unit Scoring unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5552

Condition: used, Year of construction: 2011, total height: 2,850 mm, total length: 3,600 mm, total width: 1,500 mm, Colour: Grey Weight: 1.800 kg Resaw Centauro R1000 + RTF Machine number 19602 Year of construction 2011 Wheel diameter 1000mm Max cutting height 520mm Max cutting width 970mm Max saw blade width 110/80x1mm Max min saw blade length 6570/6380 Table size 1500x920mm Speed 570 Rpm 22kW (30hp) Required extraction capacity 2500 m³/h Working pressure 6-8 bar Codoz H T U Aopfx Acpsrh Dimensions 2255x2200x3000mm (LxWxH), weight 2300kg - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 19602 - Saw direction: vertical - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1000 - Max. cutting to feed roller opening [mm]: 300 - Max. cutting to stop opening [mm]: 370 - Max. cutting height [mm]: 4750 - Table width [mm]: 900 - Table length [mm]: 1380 - Feed roller type: Automatic electric - Extraction port diameter [mm]: 220 - Options: Tiltable fence - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 25.0 - Transport dimensions: 3600mm x 1500mm x 2850mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 51.10.318.12, functionality: fully functional, operating hours: 300 h, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 315 mm, cutting width (max.): 420 mm, control type: manual, roller diameter: 440 mm, pivoting range: 45 °, actuation type: electric, total height: 1,900 mm, total length: 780 mm, total width: 650 mm, overall weight: 140 kg, table height: 91 mm, year of last overhaul: 2012, saw band speed: 333 mm/s, Equipment: CE marking, documentation/manual, motor brake, saw blade guard, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Crjdpfjz Im Husx Acpoh Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo).

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 423.10.100.12, functionality: fully functional, operating hours: 500 h, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 400 mm, tool diameter: 88 mm, number of blades: 63, actuation type: manual, rotational speed (max.): 5,000 rpm, total length of planing tables: 2,000 mm, total width: 1,200 mm, total height: 1,100 mm, overall weight: 580 kg, year of last overhaul: 2012, total length: 2,100 mm, cutting height (max.): 5 mm, cutting width (max.): 410 mm, height adjustment type: electric, table height: 888 mm, Equipment: CE marking, documentation/manual, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Cjdpfsz Iml Rjx Acpsrh Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo).

Condition: used, Year of construction: 1992, Panel saw Manufacturer: Altendorf Model: F45 Year of manufacture: 1992 Sliding table length: 3,200 mm Cutting width: 1,250 mm Cutting height: approx. 1,450 mm Power: 5.5 kW Saw blade diameter: max. 450 mm Cjdpfx Acoz I Tqaoporh Speeds: 3000 - 4000 - 5000 rpm Scoring saw: No Motor brake: No

Condition: like new (used), Year of construction: 2021, operating hours: 20 h, J. Neu Piccolo EP 150 oscillating panel saw, manufactured in 2021, in like-new condition. The original saw blade is still installed, and the saw has been used for a maximum of 20 hours. Therefore, it is in very good condition! Equipped with infeed and outfeed roller conveyors: 600 cm each. Power: 3.7 kW Saw blade: max. 500 mm (30 mm bore) Cutting height: 150 mm Codpjz It Ewjfx Acpsrh Optionally, a matching dust extraction unit from Holzkraft RLA 140 (manufactured in 2023) can also be purchased (see last picture). The machine can, of course, be inspected while powered on and thoroughly tested. The sale is to business customers only and excludes any warranty for defects. No guarantee, warranty, or right of return.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 306533, functionality: fully functional, cutting height (max.): 350 mm, cutting width (max.): 610 mm, overall weight: 550 kg, saw band length: 4,700 mm, TECHNICAL DETAILS Saw band length: 4,700 mm Csdpfxez Im Sko Acporh Tool dimensions: 13 × 0.65 × 24 TPI Guide roller diameter: 630 mm Cutting height: 350 mm Cutting width without rip fence: approx. 610 mm Cutting width with rip fence: 150 mm Loading height: 1,065 mm Cutting speed: 10–100 m/min Table travel: approx. 600 mm Table feed rate: 0.03–0.3 m/min MACHINE DETAILS Dust extraction connection diameter: 1 × Ø 120 mm + 1 × Ø 100 mm Required flow velocity: min. 25 m/s Required volume flow: 1,725 m³/h Operating voltage: 400 V / 50 Hz Type of current: 3 × 400 V Fuse rating: max. 16 A Minimum conductor cross-section: 1.5 mm² Motor power: 0.75 kW Dimensions & Weight Dimensions (L x W x H): approx. 1,850 x 1,200 x 2,300 mm Machine weight: approx. 550 kg

Condition: used, Year of construction: 2021, with swiveling saw blade, 45° to the right and left used in top condition low operating hours function tested partially refurbished Manufacturer: Rinaldi Type: TMA 42 AD Year of manufacture: 2021 Machine no.: 215783 CE type-tested Motor kW: 1.5 pneumatic Roller table length, right: 3000 mm with electronic digital display Roller table length, left: 4000 mm Stop flaps, number: 1 2-hand safety circuit Protective guard Cutting height mm: 160 Cutting width mm: 205 Blade diameter mm: 420 Dust extraction connection mm: None Space requirement approx. L x W x H mm: 800x900x1600 Weight approx. kg: 230 Total connection value approx. kW: 1.5 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected Crodpfx Acez I Udnepjh without warranty

Condition: good (used), Year of construction: 2018, functionality: fully functional, Equipment: CE marking, documentation/manual, Ficep automatic sawing line, type K 115 L, year 2018, including 25-meter infeed roller conveyors and 12-meter outfeed roller conveyors, as well as buffer tables. The saw is fully automatic and can perform miter cuts on both sides, +/- 60 degrees. Codjz Izgcspfx Acpjrh Maximum cutting capacity at 90 degrees: 1100 x 510 millimeters. Cutting capacity at 45 degrees: 700 x 510 millimeters. Cutting capacity at 60 degrees: 460 x 510 millimeters. Motor power: 15 kW. Maximum handling weight: 11,500 kilograms. Working height: 850 millimeters.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, Fully functional semi-automatic saw with single-sided miter capability. Csdpfx Aoz I U Imecpjrh

Condition: good (used), Year of construction: 1985, Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, Cold circular saw, metal circular saw type TRL 300, swivels on both sides Crjdpfoz Hwc Rex Acpeh -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 300 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Dimensions: 1100/720/H1490 mm -Weight: 227 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 84 kW (114.21 HP), cutting height (max.): 450 mm, saw blade diameter: 630 mm, actuation type: electric, rotational speed (max.): 1,480 rpm, Walter 84kW Multi-blade saw Dimensions Length 3440 mm Width 1900 mm Height 1700 mm Cutting parameters Maximum diameter of the log to be sawn 450 mm Diameter of the circular saw 630 mm Minimum width of the center stack 60 mm Maximum number of saws per spindle 4 pieces 2 spindles, one on top and one on the bottom Motors Power of the motor for the lower drive 52 kW Power of the motor for the upper drive 41 kW Spindle speed 1480 rpm Infinitely variable feed rate 0–15 m/min (0–25*) Power of the motor for the feed drive 4 kW Additional equipment Codpez H T Aysfx Acpjrh Log turner for rotating and positioning logs up to 6 m in length Side product separator for material up to 6 m in length

Condition: as good as new (ex-display), Year of construction: 2020, machine/vehicle number: 6165011005, functionality: fully functional, power: 2.5 kW (3.40 HP), cutting height (max.): 335 mm, cutting width (max.): 460 mm, pivoting range: 60 °, rotational speed (max.): 110 rpm, rotational speed (min.): 20 rpm, total height: 1,932 mm, total length: 2,763 mm, total width: 2,502 mm, overall weight: 2,100 kg, table height: 700 mm, year of last overhaul: 2020, Equipment: CE marking, documentation/manual, This machine has never been used in production and has only served as a demonstration model in our showroom. Crjdoz I Tgzopfx Acpsh New price: €50,900,- excl. VAT Fixed selling price: €39,500,- excl. VAT Fully hydraulic production band saw machine, heavy-duty design, for machining light to heavy materials, profiles, tubes, and solid stock in all grades. For both 90° and miter cuts. The smooth swiveling of the sawing unit allows for stepless and quick adjustment of any desired miter angle, using a clearly readable adjustment scale: one-sided up to 60° (acute angle 30°). Straight cuts and miter angles up to +45° can be cut automatically. Angles larger than 45° up to 60° are cut in a semi-automatic cycle. The stepless adjustable band speed and feed rate ensure the best results in terms of cutting performance and tool life. The standard Advanced Control system offers optimal machine operation. 99 sawing programs (length/quantity combinations) can be easily programmed in advance. After the programmed number of pieces has been reached, the machine switches off automatically. When used automatically, the minimum non-cutting time ensures maximum output. The precise ball screw drive in the material feed guarantees exact material length positioning.