Used Chop Saw for sale (6,622)

Condition: excellent (used), OMEC TA185 crosscut saw Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Csdjrk Nxgopfx Ah Uori Pneumatic material clamping Pneumatic saw pass Saw control with two buttons Main motor with a power of 7.5kw 2x roller tables length 160cm each CE certificate Technical documentation

Condition: used, Mitre Cold Circular Saw EISELE Type VMS-II-S Model No. 421 Serial No. V 2295 Year of manufacture: 1984 Cutting capacity at 90° (round): Ø 120 mm Cutting capacity at 90° (rectangular): 120 x 90 mm Saw blade diameter max.: 350 mm Blade speed: 40 - 80 rpm, 2-step Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Motor power: 1.4 and 1.9 kW Power supply: 380 Volt, 50 Hz - Two cutting speed stages via two motor speeds - Manual saw carriage lowering via adjustable lever - Manual material vice, side-adjustable - Coolant system with electric coolant pump integrated in machine base - Equipped with one saw blade, approx. Ø 350 mm - Outfeed roller conveyor 750 mm with simple length stop up to 1000 mm, fixed to the machine base - Infeed roller conveyor 2350 mm with simple length stop up to 2500 mm, free-standing - Usable roller width: 180 mm Space requirement of base machine with outfeed roller conveyor (L x W x H): 1400 x 850 x 1700 mm Base machine weight: approx. 450 kg Crodpfx Asxk Uunsh Uei Infeed roller conveyor weight: approx. 140 kg Good condition

Condition: reconditioned (used), - Paul cross-cut saw 17 AP - pneumatic saw stroke Crodpovkfuijfx Ah Uoi - 150 mm cutting height - 400 mm max. cutting width - 2 non-driven roller tables, each 2,000 mm long

Condition: used, Year of construction: 1997, cutting height at 90°: 170 mm Csdpfx Aoxc Hkfeh Ujri cutting length: 410 mm miter vertikal: -60° bis +60° sawblade diameter: 420 mm speed: 2800U/min motor power: 2,2 kW motor brake: yes suction connection: 100mm machine length: 1,20 m machine width: 0,7 m Maschinenhöhe: 1,50 m waight: 110kg

Condition: good (used), Year of construction: 1967, Metal Chop Saw Type LMS I Crsdpexa Hkmjfx Ah Uei - Year of manufacture: 1967 - 380 Volts - 1450 rpm; 2950 rpm - 1.8 kW

Condition: used, Forma chop saw IDC000125 - manufacturer: Forma - infeed table - outfeed table - width: 350 mm - height 150 mm Cjdpfovzw Agsx Ah Usri - complete with saw dust suction system

Condition: excellent (used), STROMAB CT800 Beam Cutting Centre A cutting centre for beams with large cross-sections, making it the optimal solution for carpentry and timber frame construction. With electronically controlled 5-axis technology, it meets all requirements for straight, inclined, and compound cuts. It guarantees maximum processing speed and finished product quality while reducing labour requirements and maximizing productivity. The CT800 can process beams of any length, with cross-sections ranging from 120×45 mm to 290×280 mm. Beam movement system with driven rubber wheels and pneumatically tilting upper clamps. Specification: Motor power: 18 kW TCT saw blade: 800 mm Number of electronically controlled axes: 4 Saw table rotation: 0° ÷ 340° Table rotation speed from 0° to 340°: 18" Blade angle: 90° ÷ 45° Positioning speed: 0 ÷ 17 m/min Cutting range: At 90° with single stroke: mm 280×290 / 250×390 / 200×450 At 90° with table movement and repeat cutting: mm 280×770 / 250×840 At 45° with single stroke: mm 200×210 At 45° with table movement and repeat cutting: mm 200×760 Crjdpfx Aswtw Avoh Uei Maximum longitudinal cutting height: mm 300

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm Cedpequzd Rsfx Ah Ueri - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition

Condition: reconditioned (used), - 150 mm cutting height - 500 mm cutting depth Cedpsvkf Naefx Ah Ujri - Pneumatic saw stroke - 2 roller conveyors approx. 4,000 mm long - 500 mm roller width - 3 adjustable length stops

Condition: excellent (used), Year of construction: 2021, operating hours: 80 h, functionality: fully functional, machine/vehicle number: Stromag CT 600 F, saw blade diameter: 600 mm, cutting height (max.): 410 mm, feed length X-axis: 7,000 mm, feed rate X-axis: 90 m/min, cutting width (max.): 250 mm, total length: 12,000 mm, overall weight: 2,700 kg, type of input current: three-phase, workpiece weight (max.): 80 kg, cutting length (max.): 6,600 mm, air demand: 350 m³/h, input voltage: 400 V, extraction connection diameter: 110 mm, spindle motor power: 7,500 W, main saw diameter: 600 mm, saw blade speed: 2,560 rpm, operating pressure: 6 bar, Keveset Használt.Maró állomás is van benne. Credpoxcihgofx Ah Uei

Condition: excellent (used), Cross-cut saw Velox 350 with roller conveyor approx. 5000 mm Machine ready for immediate use Crjdpfx Aot Ta Ureh Usi 1.5 kw, 380 Volt 2 speeds Double miter cuts possible

Condition: used, Stromab TR350 chop saw IDC000098 - complete with filter - with roller conveyors Crsdpfx Ahsu Dhzij Uji

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 054530, power: 10 kW (13.60 HP), For sale is a fully operational Reinhardt cross-cut line Slim Line SL 170 (year of manufacture 2005). The machine will remain in use at our facility until week 41/2025 and can be inspected on site at any time. Dismantling is scheduled for week 41/2025. The machine has been used in our wood packaging department. Technical specifications / Features: • Model: Slim Line SL170 (Reinhardt) Cjdpfx Ahew S Tvnj Usri • Year of manufacture: 2005 • Connected load: 10 kW (saw unit 7.5 kW) • Max. cutting width: 290 mm (specification: 50 x 380 mm) • Max. cutting height: 170 mm • Saw blade diameter: 600 mm • Saw blade bore: 30 mm • Feed speed: 90 m/min • Weight: approx. 2 t • Dimensions: approx. 12,610 mm x 1,908 mm • Extraction port diameter: 2 x 125 mm • Cutting length: up to 5 m possible • Maintenance: Ejectors were replaced in December (cost approx. €6,000 net) • Documentation: Operating manual and spare parts list available Condition: Well maintained and fully functional, currently in operation. Detailed photos and further information available on request. Location / Inspection: Location: 83549 Eiselfing – Inspection possible at any time by appointment. Dismantling in week 41/2025. Contact: If you are interested or to arrange a viewing appointment, please contact: 08071 919 267. All information without guarantee. Errors and intermediate sale reserved.

Condition: good (used), TYRO Mitre Saw Good condition, fully functional, can be inspected and tested on site. Shipping also available internationally. Cjdpfx Ahjw Rctye Usri Inspection: I would like to point out that, in order to avoid misunderstandings, the item can be inspected and tested under power before purchase. Please ask any questions prior to purchase to avoid uncertainties. For general inquiries or to arrange an inspection appointment, I am available at the phone number listed below or above at any time. Subject to errors in the description and prior sale. VAT is itemized separately on my invoices. Shipping via freight forwarding company.

Condition: used, Stop for chop saw, pull saw ... Credpfodapm Rox Ah Uoi -Recording: Bosch profile -Length unit: 2000 mm -Price: complete -Dimensions: 2215/100/H1000 mm -Weight: 10 kg

Condition: like new (used), Year of construction: 2023, For sale: used Stromab CT600 saw Year of manufacture: 2023 Saw in very good condition, normal signs of use. 13 m infeed table with milling unit 6 m outfeed table Table rotates 80 degrees Crjdsvplzgepfx Ah Uji 18-inch output monitor

Condition: like new (used), Year of construction: 2022, How do you do? We are offering you our cross-cut saw from MS Maschinenbau in very good condition. Crodpfx Aotykw Seh Usi Technical data: Lengths between 600 mm - 3000 mm Workpiece thickness min. 3 mm max. 100 mm feed 5-30 m/min stepless Roller table is included Condition is as good as new If you are interested, the machine can also be tested. If you have any questions, please contact us.

Condition: used, Maggi Best 960 IDC000099 Codpfx Aheu Dh Hlj Ueri

Condition: ready for operation (used), functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 120 mm, cutting width (max.): 300 mm, rotational speed (max.): 3,000 rpm, saw blade bore: 35 mm, product length (min.): 600 mm, TECHNICAL DETAILS Maximum workpiece thickness: 120 mm Maximum workpiece width: 300 mm Minimum workpiece length: 600 mm Example cutting sizes: 90 x 220 mm / 50 x 270 mm Feed & cutting cycle Maximum feed speed: 180 m/min Maximum acceleration: 15 m/s² Saw cycle time: 0.2 - 1 s Average number of cuts: 80 - 90 / min Feed motor power: 7.5 kW Saw blade & motor Saw blade diameter: 450 mm Saw blade bore: 35 mm Speed: 3,000 rpm Saw motor power: 5.5 kW Motor power: 5.5 kW Extraction Cedpfxevzyulj Ah Uori Extraction connection: 200 mm

Condition: new, Year of construction: 2025, machine/vehicle number: diverse, The professional for cutting to length, miter and bevel cuts The ZS 200 N is ideally suited for cutting to length, mitre and bevel cuts. Materials such as wood, PVC and aluminum profiles can be cut cleanly and precisely. The saw unit runs on a hardened guide arm and can be tilted horizontally on both sides for miter cuts. The N stands for tilt and means that the saw unit can also be tilted vertically to the side, making it easy to carry out rip cuts. Fact check ZS 200 N Crosscut and mitre circular saw with a maximum cutting height of 200 mm Sturdy cast iron construction precise ball bushing guide of the tool carriage on hardened and ground steel shafts manual saw feed fast miter adjustment up to 65° horizontal and up to 60° vertical Adjustable fixed stops Lower saw blade guard Can be connected to extraction system Machine can be tilted on both sides from the front Hydraulic feed brake Technical details: Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°-90°-25° Vertical mitre range 60°-90°-30° Saw blade Ø 520 mm Csdpfx Ajh Nu Iuoh Usri Weight 310 kg Scope of delivery: ZS 200 N cross-cut and shifter saw Machine stand Machine can be tilted from the front on both sides Hydraulic feed brake HM Z 60 neg. circular saw blade Operating tool and hand crank

Condition: not inspected (used), functionality: limited functionality, machine/vehicle number: 0.48.12.77180, Functional Holtec crosscut saw year of construction approx. 1980 Crodpfx Ahjt Uhale Usi

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, cutting height (max.): 250 mm, working height: 850 mm, power: 7.5 kW (10.20 HP), We sell 1 x JRIMAC crosscut saw UKS 1.000 Cross cuts: 60x940 - 140x820mm - 180x720 - 220x520 - 240x340 Max. cutting height: 260mm Codpfx Asrfudreh Usri Saw blade: 700mm Working height: 850mm Bottom and top extraction sockets: 160mm - Infinitely adjustable, pneumatic cutting feed - hydraul. Brake cylinder for even lifting speed - Pneumatically controlled workpiece clamping device - cutting release via 2-hand control, with safety shield - Roller conveyors and stop systems on request

Condition: excellent (used), Year of construction: 2021, Two saws 2.2 kW motors Max. Cutting width 240 cm Height 10 cm Very good condition. Codpfx Aheha Ncho Uori

Condition: used, FOR SALE LINE FOR CUTTING OUT DEFECTS, YEAR OF MANUFACTURE 2007 -BOARD FEEDING ROBOT -WEINIG POWERMAT 1200 PLANER -WOODEYE SCANNER -PAUL C14 OPTIMIZER Cjdpfx Ahowmprvs Uori -FEEDING AND RECEIVING TABLES -JENZ CHIPPER MORE INFORMATION BY PHONE POSSIBILITY TO SEND A VIDEO OF THE MACHINE WORKING

Condition: excellent (used), Year of construction: 2002, Disc diameter 50 mm 7.5 kW motor 3 sorters Cjdpfxsuxnpce Ah Ujri The length of the automatic feeder is 4 m The length of the receiving feeder is 6 m Cutting cross-section 300x100