Used Pantograph for sale (40)

Condition: excellent (used), functionality: fully functional, Working dimensions mm 290×185 Vertical stroke mm 200 Table rotation 0-90° Vice capacity mm 170×135 Guodoy Awkljpfx Afwea Spindle speed rpm 2800-12000 Power kW 1.1 Voltage V 230-400 ±5% Pressure bar 7

Condition: good (used), machine/vehicle number: 16526, pattern table size: 320 x 440 mm working table size: 200 x 300 mm Guodpfxjdlkwgo Afwsa working area longitudinal: 250 mm working area cross: 220 mm spindle turning speed range: 1460 - 8550 rpm milling proportion: bei 1 : 1 ca. 105 x 165 mm spindle drive: 0,86 kW space needed: 1000 x 900 x 1320 mm weight: 360 kg

Condition: used, Year of construction: 2013, machine/vehicle number: 448582, overall weight: 991 kg, load capacity: 1,700 kg, enginetype: undefined, manufacturer: Kaup Gsdexvv S Sepfx Afweua

Condition: used, Special pantograph for milling children's bed legs. Foot-operated head movement, pneumatic piece movement. Gusdpfopwt D Esx Afwoa

Condition: good (used), Year of construction: 1969, Work table Clamping surface 500 x 200 mm distance milling spindle - work table 300 mm longitudinal movement of the table by hand 300 mm transversal movement of the table by hand 160 mm template table stencil table 550 x 324 mm distance pantograph arm - clamping surface 20 mm Rotatable 360 stencil grooves 7 pcs., distance 45 mm Milling spindle spindle speed 1.900 - 15.000 rpm cutting speed 1 - 226 m/min Guedpfx Afoidckfswoa motor speed 2.800 rpm Internal taper of the graver spindle 1:5 Gr. bore of the collet 6 mm Adjustability of the spindle 1 mm fine, 3 mm coarse Pantograph Transmission ratio 1 : 1 to 1 : 50 driving power 0,2 kW Dimensions Required area L x W x H 1400 x 1000 x 1420 mm Weight 260 kg Accessories / special features: - 1 set of fonts with letters and numbers - stylus

Condition: used, Year of construction: 2011, functionality: fully functional, power: 56 kW (76.14 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total height: 1,800 mm, total length: 4,800 mm, total width: 2,150 mm, Equipment: documentation/manual, Artiglio carriage with a Artiglio headrig for sale. Carriage is equipped with 3 Independent knees, positioning done by servo motors. Program for cutting and manual dimension setup done through a touch display for ease of use. Carriage forward and reverse movement controlled by pedals, carriage is driven by an on board hydro motor. Turning, clamping and manual knee positioning done with joysticks. Cables and hydraulic hoses are ran to carriage through a pantograph. Schematics and user manuals in digital and printed format. Carriage and headrig have been removed, cleaned and some restoration work done after removal. Condition wise everything is fully functional just visual wear. Currently packed, stored in a warehouse and ready for shipping. Carriage: Model - NIBBIO 1000 Length - 4.8 m Width - 2.15 m Height - 1.8 m Longitudinal speed - 0-130 m/min Maximum side opening - 1000 mm Upper jaw opening - 800 mm Distance between wheels - 1260 mm Tow rope type - S10AR Towing rope diameter - 14 mm Overall length of towing ropes - 41 m Central tank capacity. Hydraulics - 120 l Longitudinal drive - 20 HP ONBOARD HYDROSTATIC Year - 2011 Headrig: Model - ST/I 130 Main motor power - 56 Kw Total weight - 4750 kg Gedsy Anp Eopfx Afwsua Flywheel diameter - 1300 mm Year - 2011

Condition: used, Year of construction: 2024, color: green, empty load weight: 4 kg, first registration: 06/2024, fuel type: gasoline, gearing type: mechanical, TITLE: USED OPEN-TOP HOOK-UP CONTAINER FOR BULKY WARE IN HARDOX, REAR OPENING WITH TWO FOLDING DOORS + MEC CRANE WITH PANTOGRAPH FEET AND 6-BLADE GRAPPLE WITH MECHANICAL ROTOR REF: 24-U-103 TYPE: bulky goods with crane NEW: no LID: no OPENING: rear with two folding doors OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 5.90 m CASE LENGTH: 4.70 m + 1.00 m crane space + 0.20 m beams CASE EXTERNAL WIDTH: 2.50 m CASE INTERNAL / EXTERNAL HEIGHT: 2.30 m / 2.50 mt MC: 25 WEIGHT: 6020 kg BOTTOM: 5 mm WALL: 4 mm COLOUR: green CRANE DATA Godpjv Hiciefx Afwoua BRAND: MEC F1211.S2 SERIAL NUMBER: 50579088 EXTRACTIONS: 2The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles, mainly specialised in the waste sector. Specialised in trucks, trailers and hook-lift equipment. With a fleet of over 50 trucks and over 150 skip loaders, containers with and without hook-lift cranes ready for delivery. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the accuracy of the data entered with the sales staff.

Condition: like new (used), Year of construction: 2018, operating hours: 183 h, load capacity: 1,200 kg, lifting height: 3,300 mm, fuel type: electric, mast type: duplex, construction height: 2,200 mm, Options: VERY unique CONTRA stacker!! Fully equipped! Features: FFL mast = Full Free Lift, side shift, mast tilt, pantograph, extra wide fork carriage; width = 1230 mm, blue spot & strobe light, lateral battery change system, with cantilever adjustable forklift forks, suitable for all types of pallets, power steering, complete and LIKE NEW! Guodpfx Afoyy Ap Uswsa

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 8,000 kg, empty load weight: 1,180 kg, construction width: 1,200 mm, Pantograph Gusdpfx Aou Dy Hqjfwoa Load center: 600 Condition: Ready for use and fully functional Technical condition: very good Description: Feed fork carriage: 540 mm

Condition: excellent (used), For sale: classic, proven Gravograph IM3 mechanical engraving machine – perfect for nameplates, signs, industrial marking or jewelry. • Model: Gravograph IM3 • Manufacturer: GRAVOGRAPH GMBH, Umkirch (Germany) • Fully functional motor, clean guides • Set includes a complete collection of fonts and symbols • Stable cast construction • Precise pantograph control • Sturdy work table with linear guidance Guodoun U Ucepfx Afwsa Used condition, technically sound. Suitable for both workshop and decorative or advertising purposes.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 03814V2200, functionality: fully functional, operating hours: 2,416 h, input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, number of slots in tool magazine: 1, total height: 2,400 mm, total length: 3,000 mm, total width: 1,200 mm, overall weight: 1,100 kg, table length: 2,200 mm, table width: 280 mm, coolant supply: 3 bar, feed length X-axis: 2,200 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 280 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, spindle motor power: 4,500 W, number of spindles: 1, rapid traverse Z-axis: 6 m/min, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 7 m/min, rotational speed (max.): 18,000 rpm, rotational speed (min.): 1,000 rpm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 1,000 rpm, table height: 1,200 mm, Equipment: rotational speed infinitely variable, NUMERICALLY CONTROLLED PANTOGRAPH WITH VERTICAL PLANE MODEL "VERTICAL 2200 OPEN" WITH 3 INTERPOLATED AXES FOR WORKING MARBLE AND GRANITE basic assembly: - range: x-axis=2200 mm. y-axis=1200 mm. z-axis=300 mm; - work surface L. 2500 x H. 1250 mm; - heavy carpentry-made structure in processed and painted steel; - Side openings with loops, both on the left and on the right, for processing oversized blocks with support rolls; - slabs and carter support in inox steel; - highly deep workbench made with extruded aluminium profile ; - slab locking with n°2 clamps with mechanical blocking device; - three-phase electro spindle hp 5 1/2 gas connection with perforated shaft and rotating joint for water Guedpfsygxc Aex Afwea passage for internal and external tool refrigeration, and inverter for variation to maximum 18000 r.p.m .; - openable polycarbonate protection for electro-mandrel, with safety micro; - axes movement by means of runners and sliding blocks of balls recircle; - dust tents for total protection of all moving parts; - water cooling tool system with centralized drain, including pump, decanting tanks and locking electrovalve; - electronic panel with console comprising numeric control, pc and monitor. Windows software included ARTCAM INSIGNA: - carrying out of reliefed and engraved writing, using all "true Type" fonts; - cad for carrying out drillings, cuts, engravings, millings and inlays; - import of most common types of files as dxf and dwg to create writings, drawings and stamps, reliefed and engraved logos, showr trays, sinks, arcs and portals; - automatic drilling for inserting bronze letters; - carrying out single and multiple sculptures in high and bas-relief; automatic switch off; 3D PLAN LASER laser copyng system to import manufactured products and tree-dimansional figures (bas and hight - relief) with interface and software for required dimensions

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 2,839 h, load capacity: 400 kg, empty load weight: 14,500 kg, arm reach: 9,300 mm, working height: 14,400 mm, Two-way work platform Technical condition: normal - Predisposition for quick-change axle system (Retrofitting the machine with axles of different track widths is not possible without predisposition!) - Multi gauge predisposition - Pantograph predisposition (Installation of a pantograph is not possible without predisposition!) Gusdpfx Ajya Rkfjfwja - 230 V / 4.5 kW / 50 Hz power generator - Datalogger and keyboard with password protection - Tool box RR14EVO - Wind meter RR14EVO (anemometer, 12.5 m/s) - Hatz Diesel engine 3H50 42 kW (Tier V - Diesel particulate filter integrated) - 230 V socket in the basket - GPS system for remote diagnostics and monitoring - Additional emergency diesel engine Hatz 1B40 (for emergency situations only) - On-board camera with live image (+ night vision) RR14EVO (mandatory in AT) - Extra tool box in the work basket - Panolin oil HLP Synth 46 - biodegradable hydraulic oil - KIT Wagon Brake system_RR14-EVO3 (4520069300) - Larger second tool box mounted on the chassis - Fire suppression system for tunnel applications

Condition: used, SCM R9 Pantograph Godpfxswzauws Afweua

Condition: excellent (used), functionality: fully functional, Pantograph with 2 controlled axes, ideal for machining aluminum, PVC, and steel profiles up to 2 mm, with the option to process stainless steel (optional). The work cycle is managed through intuitive software that guides the operator with simple instructions on the touchscreen display. The USB connection allows for easy linking to a PC. The four-sided rotating worktable ensures very high precision by using shorter tools, thus avoiding through machining and the resulting issues of vibration and noise. It is equipped with a quick tool change system with ISO 30 taper. A retractable, pneumatically operated guard protects the operator during machining. Gsdpfx Ajx U Dg Dofwoua

Condition: new, Year of construction: 2023, cutting length (max.): 5,100 mm, cutting width (max.): 860 mm, saw blade width: 380 mm, saw blade length: 5,000 mm, WM4000S industrial band saw with operator's cabin Drive: Electric motor: 22 kW Cutting parameters: Maximum cutting length: 5.1 m with board removal system Maximum cutting width: 86 cm Bed and head: Debarker Head movement (front/back): electric Advanced touchscreen display Saw guide arm: electric Double saw guide roller Automatic saw lubrication Pneumatic saw tensioning Servo motor (up/down) Board removal conveyor 1.7 m Pantograph Reinforced bed Hydraulics: 2 vertical side supports 2 chain turners 1 main clamp 1 drive roller 1 side roller 2 clamps Hydraulic pump 7.5 kW Saw blade: Length: 5000 mm Godpfjypk Rdox Afwsua Width: 38 mm Wheel diameter: 635 mm Year of manufacture: 2023 Price: PLN 530,000.00 PLN 399,000.00

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 1 h, VOLUMEC EasyArm 3 Three-articulated arm system including orbital attachment with clamp max. Ø 125mm - Working range: 1900 mm - Torque: max. 260Nm - Weight of the tool: 11.5 - 15 kg - Weight of the arm: 17 kg Milwaukee angle grinder NOT included in the price! Gusdpfevtaqksx Afwea The pantograph structure maintains the balance and at the same time absorbs the restoring forces of the torque tool. The swivel arm makes it easy to reach the optimal working position. WEIGHTLESSNESS. The EasyArm series was designed to accommodate tools or other devices up to a maximum weight of 30 kg. The structure of this system, made entirely of aviation aluminum, guarantees smooth, controlled movements and correct positioning of the tool. Vibrations and torques are absorbed. The selection of different stop and clamping positions as well as various accessories results in many different processing and application options. This allows different work areas to be realized. The use of these balanced articulated arms prevents premature exhaustion of employees. Higher productivity and better working health are clear advantages here. EasyArm is a complete series of balanced articulated arms that enables a wide variety of applications.

Year of construction: 2020, condition: used, functionality: fully functional, load capacity: 2,500 kg, Pantograph ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical Condition: good Gjdsyi Ncxopfx Afwoua Description: Year 2020 ISO 3A (51 cm) Capacity 2500 kg Sideshift Opening range 1200-2150 mm Width 1040 mm Forks 1200 mm ID OS1884

Year of construction: 2021, condition: used, functionality: fully functional, load capacity: 2,500 kg, Pantograph ISO class: ISO class 3 = 2,500 - 4,999 kg Guodpfx Asyi Ncrjfwoa Condition: Ready for operation and fully functional Technical condition: good Description: Year 2021 ISO 3A (51 cm) Capacity 2,500 kg Sideshift Opening range 1,200-2,150 mm Width 1,040 mm Forks 1,200 mm ID OS1883

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1000042683, feed length Y-axis: 1,300 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 63 A, total width: 1,950 mm, total length: 1,950 mm, total height: 3,100 mm, The Brema Vektor 15 is a CNC machining center with a vertical column, designed for processing wood-based panels. The machine can perform drilling, milling, and engraving using a pantograph. It allows for machining on all 4 edges of the panel and profiling thanks to its patented panel transportation system. The machine is equipped with: - A head with independent vertical spindles: 21 (7 on X + 14 on Y) - Horizontal spindles (2L + 2R on X) - Main vertical spindle (milling unit) 7.5kW - Automatic revolver-type tool change system, 10 positions Available revolver units: 1. Saw on X 2. Saw on Y 3. Drilling on Y (1R + 1L) 4. Hinge drilling (1x35mm + 2x5mm) Godjx Hfh Topfx Afwsua 5. Milling 6. Milling 7. Milling

Condition: excellent (used), Year of construction: 2006, CNC WORKING LINE FOR DOOR FRAMES, comprising: 1 HORIZONTAL LOADING TRANSFER MOTORIZED, model 0190 T.C Loading buffer with horizontal transversal belts and motorized rollers with variable speed control. 1 gasket insertion unit on a horizontal groove, consisting of: - 2 motorized gasket roll holders - 1 pressure roller insertion unit - 1 cutting unit positioned near the end of the profile 1 cutting/drilling machine for finished cuts, model 01TFRD SPECIAL, referencing the upper workpiece. Suitable for cutting, drilling, milling, and hinge (anuba) insertion on door jambs. MACHINE CONFIGURATION: Worktable constructed of a solid steel frame, with a fixed left section and a movable right section. Electronically controlled positioning system, supporting a total of 6 machining units: 2 on the right, 2 on the left, and 2 on the upper bridge. 1 CENTRAL MOTORIZED SHUTTLE with CNC control for milling the ends of jambs. 1 HORIZONTAL RADIAL CUTTING STATION, 0-45°, quick tilting with selector, featuring 2 groups (one per side). Each side with its own motor, including a timed entry system to prevent double cutting positions. Cutting motor power: 5 HP – 3000 rpm – inverter-controlled. Cutting blade bore: 30 mm. Saw blade diameter: 370 mm. Adjustable extraction hoods and safety guards. 1 HORIZONTAL HEAD DRILLING STATION 0-45°, fast vertical tilt with selector, with 2 groups (right and left). 2 HP motor, 3000 rpm. 7-spindle drilling head with 32 mm pitch. Individually selectable spindles. Groups travel on linear guides for increased speed and drilling accuracy, with longitudinal and vertical adjustment capability. 1 UPPER VERTICAL ROUTING (PANTOGRAPHING) STATION, on a transverse bridge, with 1 motor for counterplate slotting, 2 HP, 12,000/18,000 rpm. Vertical, horizontal, and depth (x-y-z axis) movements are CNC-controlled, utilizing precision linear guides and recirculating ball carriages. Equipped with tool holder collet. 1 HORIZONTAL ANUBA DRILLING STATION, with 1 CNC-positioned motorized unit moving in conjunction with the router. Includes a drilling unit, custom Anuba inserting unit, and custom Anuba feeder with approx. 35 piece capacity (depending on Anuba diameter). 1 LINE CONTROL COMPUTER Capable of importing data (CSV or ASCII) via MMC (Memory Card). Note: The imported data will be used for automatic positioning and execution of processing steps as per the job list. Workpiece dimensions: Minimum length: 580 mm (45° internal for frame) Maximum length: 3000 mm (45° external for frame) Minimum thickness: 30 mm Maximum thickness: 60 mm Minimum width: 75 mm Guedpfx Asygcmfjfwea Maximum width: 300 mm

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, controller model: Ferrocontrol DARC, TECHNICAL DETAILS Upper drilling heads: 3 Drill spindles per head: 36 Vertical pantographs: 2 Working dimensions: 2,500 x 800 mm MACHINE DETAILS Control: Ferrocontrol DARC EQUIPMENT Electronic drilling machine Automatic loading system with motorized roller conveyor Guodpsydn Ezsfx Afwea Automatic hinge insertion system Unloading and transport roller conveyor with automatic stop

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Production line consisting of the following components: Motorized comb with multiple positions Vertical machining center Bremen Vektor Motorized panel handling system Vertical machining center Bremen Vektor Motorized transfer unit Motorized return conveyor TECHNICAL DETAILS Motorized comb length: 2,000 mm Vertical machining center Bremen Vektor Drilling head: 1 with 7 horizontal spindles in X, 16 vertical spindles in Y Pantograph: With turret tool changer for 8 positions Horizontal drilling unit: 1 for stop drilling Motorized panel handling Return: With 180° rotation and THK guide rails Length: 2,500 mm Vertical machining center Bremen Vektor Automatic infeed: By motorized chain and vertical pressure rollers Working height adjustment: Automatic via CNC Storage containers: 5 for hinges/buffers/tie rods Motorized transfer unit Output: From vertical to horizontal towards operator Length: 2,000 mm Motorized conveyor Return: To operator Gedpeydlapjfx Afwoua EQUIPMENT Computer, keyboard and mouse 15" monitor CD-ROM Automatic infeed by motorized chain and vertical pressure rollers Automatic working height adjustment via CNC

Condition: excellent (used), Alberti machining center complete with: 2 pantographs, 6-position tool changer, saw unit, 25 vertical drilling spindles, 2 + 2 horizontal drilling spindles, 1 + 1 horizontal drilling spindles. Gedpfeyf D U Uox Afweua

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, overall weight: 4,000 kg, total height: 1,600 mm, total width: 4,000 mm, total length: 5,000 mm, input voltage: 400 V, type of input current: three-phase, operating pressure: 7 bar, Schüco aluminum window manufacturing machines for sale. Schüco EVM-S4 4-head crimping press, Elumatec dual-head mitre saw, Rotox pantograph milling machine, Graule dual blade angle cutter, Graule single blade divider miller, base presses for Schüco punching tools, various hand tools, complete manufacturing setup. Guedpfeyf Idtex Afwea

Condition: used, Year of construction: 2019, functionality: fully functional, input voltage: 380 V, travel distance X-axis: 1,500 mm, number of slots in tool magazine: 12, controller manufacturer: ESA, total height: 3,100 mm, total length: 2,500 mm, total width: 4,000 mm, nominal power (apparent): 65 kVA, table load: 50 kg, GREDA MACHINING CENTER MOD. MITIKA V – CE COMPLIANT – USED TECHNICAL SPECIFICATIONS TABLE - X-axis 2700 mm (longitudinal) - X-axis (spindle only – unit A) 2900 mm - X-axis (sander only – unit B) 2050 mm - X-axis (milling unit only – unit C) 2050 mm - X-axis (gouging unit only – unit D) 1500 mm - X-axis (saw unit only – unit E) 1750 mm - X-axis (sander only – unit F) 1500 mm - X-axis with all units 1500 mm - Transversal Y-axis 380 mm - Transversal V-axis 720 mm - Vertical Z-axis 630 mm - B-axis (electrospindle) +/- 90° - A-axis rotation (indexing unit) continuous - Dimensions: 4000 x 3100 x 2500 mm - Installed power: 65 kW - Compressed air: 6 bar - 380 Volt, 3 / 50 Hz - Lathe axis upgrade with “double motor” mode and max rotation speed 2500 rpm - Short workpiece loader up to 100 mm - Tailstock with integrated quill locking - DATA LOG for Industry 4.0 - Max workable diameter: 500 mm - Max loadable weight (manual): 50 kg - Max loadable length: 2050 mm - Min loadable length: 250 mm - Workpiece diameter: max 150 mm / min 40 mm 4-AXIS PANTOGRAPHING UNIT (A) - Automatic tool changer with 12 positions, HSK 63 F taper - Electrospindle 11 kW - Max speed 24,000 rpm - Tool magazine with 12 positions - HSK 63 F tapers ADDITIONAL SANDING UNIT FOR NARROW PIECES (B) - 1 motor, 0.5 kW - Max speed 3000 rpm SANDING UNIT (C) - 1 motor, power 4 kW - Max speed 3000 rpm VERTICAL ROUGHING UNIT (D) - 1 motor, 11 kW - Max speed 9000 rpm - Shaft diameter 40 mm - Tool diameter 125 mm, h = 180 mm HORIZONTAL TURNING UNIT (E) - 1 motor, 11 kW - Max speed 4500 rpm - Shaft diameter 35 mm Guodpfex Uy Nbex Afwoa - Centralized lubrication system providing automatic lubrication of all moving parts, fully managed by the CNC - ESA CNC control EASY LATHE PROGRAMMING – STANDARD MODULE: - 3D software for drawing and programming up to 5 interpolated axes, with 3D simulation - Year of manufacture: 2019