Bona edge for sale
Identified location: Ashburn (US) (Edit)
|
10
heavy duty double side edge sanding machine
main motor approx. 4,0 kW
oscillation with main motor approx. 0,2 kW
sanding belt tensioning pneumatic
sanding belt dimension 3100 mm x 200 mm
machine dimensionsapprox. 2500 x 1500 x 1600 mm
weight approx. 1000 kg
operation panel turnable
working table with pneumatic tilting
height adjustment of sanding aggregate pneumatic
angle fence on worktable
mounting bracket for feeder
main switch, lockable
2 working table on the side for radius sanding
Bfp... more
|
|
6
Strakonice, Czech Republic
422 km
1990
excellent (used)
One-sided edge gluing machine, right execution
Anglueerhoehe max. 60 mm
Thickness 0.4 - 20 mm
Cap scissors up to thickness max. 3 mm
Glue system roller with top glue pot 8 l
Aggregates:
Glues, pneumatic cap scissors, double capsaege, pre-fraesen, fine fraesen, grinding aggregate
Magazine plate for roll and bar
Legal machine
sliding chain
Upper pressure with composite wedge belt 70 mm wide
Upper pressure adjustment manually with Siko-Zaehlwerk
4-roll pressure zone
Cutting unit with 2 m... more
|
|
7
Holz-Her Single Sided Edgebander
Model Sprint 1310
Cartridge Type Glue System
3 mm Edge Thickness Capacity
6-45 mm Panel Thickness
Single Motor End Trim
Universal Top & Bottom Fine Trim
Top & Bottom Scraping Units
Top & Bottom Buffing Units
Bfmc0qkrna
PLC Programmable Logic Control
Pristine Condition ! more
|
|
3
Brandt Highflex 1230FC Single Sided Edge Bander with Pre Mill and Corner Rounding - 2015 CE
Workpiece thickness 8 - 60mm
Tape thickness 0.4 - 3mm
Edge material in strips 0.4-6mm
Feed speed approx 11m/min
Total length 4470mm
Equipped with:
Premilling unit 2 x 2.2kw
Hot melt glue tank
Pressure zone
End trim saws chamfer / straight 2 x 0.18kw
Top and bottom tilting flush trim 2 x 0.27kw
Contour trimming unit [ 1 motor 0.35kw WD60 12000rpm ]
Top and bottom profile scrapers
Top and bottom glue joi... more
|
|
6
Twin Shaft Tracked Shredder
Year: 2016
Hours: 6530
Cat C9 Engine Tier 4 final
Overband Magnet
Fully newly hard-faced shafts and cutting tools
Breaker bar with basket fitted for fine shredding
T0dbbg2v
Spare breaker bar in stock for course shredding more
|
|
5
Wiefelstede, Germany
dealership location
6377 km
1988
used
Edge grinding, edge grinder, grinding machine
8ujfh73bo
Edge grinding with oscillation
Drive 1 kW
Speed RPM/2815
Grinding height 150 mm
Grinding length 830 mm
Table Tiltable
Table dimensions: 800 x 240 mm
Dimensions 1220/430/H1100 mm
Weight 98 kg more
|
|
6
edge banding machine, one sided, infeed from the right side
Ibjudg9
edge seize 0,2 - 12 mm
work piece dimension
width min. 70 mm
height min. / max. 8 / 52 mm
length min 160 mm (Streifenkanten)
length min 60 mm from roll
Durchlaufgeschwindigkeit: 12 m/ min
glue coating with roller
working height : 880 mm
compressed air 6 bar,1/4 Zoll
suction connection, DM 160 mm
dimensions: approx. L x W x H = 5300 x 950 x 1300 mm
weight: ca. 1950 kg
total conection: ca. 11,5 kW, 400 V, 50 Hz
machine equip... more
|
|
9
Strakonice, Czech Republic
422 km
1999
excellent (used)
Anti-vibration welded steel construction
Kettennantrieb continuous 86 mm wide, chain parts made of steel and plastic, self-lubricating bearings, shift to prismatic guide
Continuously variable belt speed 5-25 m / min
Minimum height work table 870 mm (adjustable)
The upper print unit with adjustable rubber wheels Ø 60 mm ball bearing
Side pressure unit with rubber wheels Ø 40 mm ball bearing
Working Height Min / Max 10/100 mm
Minimum length 50 mm
Minimum working width of 30 mm
The maximum width of... more
|
|
7
2001 Rue Chicoine, J7V 8P2 Vaudreuil-Dorion, CA
756 km
2005
good (used)
Biesse Akron 840 Single Sided Edgebander Year 2005 End Trim Units Flush Trim Units Radius Trim Units Profile Scraping Units Flat Scraping Units Buffing Units
Bbwkquoymv more
|
|
3
Edge magazine IMA
Noowv
- 6x - 24x fold magazine
- 550 or 800 mm coil diameter
Several versions available from stock.
Price on request. more
|
|
|
|
5
Wiefelstede, Germany
dealership location
6377 km
used
Wedge bar chucks, power operated chucks, three-jaw Chuck, three-jaw Chuck
Chuck size ø 200 mm
JAWS
Cone 69 mm
Thread M 95 x 4.5 mm
3seqxv3l
Weight 26 kg more
|
|
10
Bitburg, Germany
6422 km
2015
excellent (used)
max. glue thickness : 8.0 mm feed speed : 10 m/min. Workpiece thickness : 8.0 mmPlate running direction : from operator to left min. Workpiece width : 80 mmHeating up time : 6 minJointing unit : Yes, with 2 milling units Joining tool : Diamond milling cutter Automatic roller magazine : Yes Cutting shears up to : 0.2 - 3.0 mmIndividual edge feed : Yes Automatic gluing : Glueing basin with granulate Combination milling unit : Yes Sep. pneuma. Milling adjustment Rounding unit/Corner copying : Yes F... more
|
|
6
Year of construction: 1997
Status: Operational
Equipment and technical data:
Hyl7oxr
Edge feeder with aut. Rolling magazine and single feed
Caps scissors up to 3.0 mm
Glue tank for granules
Compound miter saw with 2 units combined milling unit flush / phase control
Controlled RADIUS trimming unit
Controlled surface scraping unit
PLC control system
Technical data:
Max on glue er thickness: 0.2-6 mm
min. thickness: 8.0 mm
maximum workpiece thickness: 42 mm
min. width: 70 mm
Speed 1:: 12 m/mi... more
|
|
2
loading area 500 x 50 mm
Edge width 0-10 mm
Angle 90 °
voltage 380 V
dimensions of the machine ca. 500 x 350 x 900 mm
weight of the machine ca. 60 kg
Cpjpxvws more
|
|
5
Barntrup, Germany
dealership location
6496 km
2000
used
single sided edge banding machineMake: HomagType: KL 79/A20/S2-20MMYear: 2000Technical data: Coil or as strip, up to 20 mm edge thickness, in lenghtwise and crosswise feed. Control NC21 - Feed stepless controllable 18 - 24 m/min - Working height 950 mm - Working width min.: - 55 mm at workpiece thickness 22 mm, 100 mm at workpiece thickness 60 mm (depending on the workpiece length) - Workpiece overhang 30 mm - Workpiece thickness 12 - 60 mm - Edge material strip max. 0,4 - 20 mm - Edge cross s... more
|
|
15
One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and
strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 ... more
|
|
3
Wiefelstede, Germany
dealership location
6377 km
used
Wedge bar chucks, power operated chucks, three-jaw Chuck, three-jaw Chuck
Ebdhwcj
Chuck size ø 195 mm
Recording cone Ø 48 mm
Recording bolt circle diameter 105 mm
JAWS
Weight 18 kg more
|
|
8
Bitburg, Germany
6422 km
1980
ready for operation (used)
Gluing unit cartridge; printing station; Buendig milling machines top- bottom with 1,1kw motors each, Massivanleimer up to 20 mm. location: in stock 54634 Bitburg
Bcvbfl20z3 more
|
|
6
Hochheim am Main, Germany
dealership location
6537 km
2006
used
Second-hand machineManufactured in: 2006Condition: workshop overhauledEquipment details:max. glue-on thickness: 8.0mmFeed speed: 8 m/minmin. Workpiece thickness: 6.0 mmPlate travel direction: from operator to rightHeating up time: 10 minJointing unit: Yes, with 2 milling unitsAutomatic roller magazine: YesCutter up to: 0.2 - 3.0 mmSolid edge magazine: YesAutomatic gluing: Glue cartridge with scanning nozzleCutter: Angle adjustment via programCombination milling unit: YesBounding unit/Corner copy... more
|
|
6
Hessisch Lichtenau, Germany
dealership location
6567 km
used
3-jaw wedge bar chucks RÖHM type Duro 200
Diameter: 200 mm
Jfcjwzp
Inside diameter: 52 mm
Speed: Max 4000 RPM.
Chuck flange: short taper DIN 55027 size 6 with 4 screws M12
Cone intake: Ø 106 mm
1 set of Chuck JAWS consisting of base jaws and hard JAWS levels RÖHM to the contact
-Central adjustment
Weight: 25 kg
good condition, probably identical with Forkardt or SMW. more
|
|
5
Edge processing line
Year: 1999
1 1/2-sided edge processing machine
Brand: Homag
Type: KL21/06/20/QA/30
Feed speed 10-32 m/min
Workpiece dimensions:
Workpiece strength 8-50mm
Workpiece width: 80-2800mm
Workpiece length max. 5000mm
Equipment:
12 fold edge magazine for thin edge
24 fold edge magazine for thick edge
Single sided edge processing machine
Brand: Homag
Type: KL10/22/QA
Feed speed 10-32 m/min
Workpiece dimensions:
Workpiece strength 7-60mm
Workpiece length max. 5000mm
Equipment:
... more
|
|
4
Hüllhorst, Germany
6452 km
1988
repair required (used)
Edge banding machine with hot melt adhesive specification for glue basin. Edge thickness 0.4 - 5 mm, panel thickness 10 - 50 mm, roll separation, travelling cross-cut unit on both sides, pre- or chamfer milling station, flush milling station.
Bfuvvpf7th more
|
|
5
Wiefelstede, Germany
dealership location
6377 km
1991
used
Molding edgebander, edge Bander, Kantenanleimaschine
-maximum workpiece thickness 60 mm
Heater fan before coated edges
3kwdlbdl
-Kappmesser
Edge plate
Transport dimensions 900/700/H1080 mm
Weight 135 kg more
|
|
7
Second-hand machine
Year of construction: 1994
Edgebander for pre-coated edging material
High performance hot air blower
Roles capping
Laminate trimmer
Feed
Tower cars
Max edge thickness 1 mm
maximum workpiece height approx. 50 mm
min. Panel length approximately 170 mm
minimum workpiece width 50 mm
Heating power 3 kW
Electr. Connection 230 V
Weight approx. 110 kg
Chassis
Much edging material here
Bellmeifol
Location: Off the shelf 54634 Bitburg
-free load- more
|
|
3
Hochheim am Main, Germany
dealership location
6537 km
1994
used
Second-hand machine
Bekxz9rziw
Year of construction: 1994
with quick heating glue containers
with compound miter saw up to 5 mm edge thickness
with combined turn plate cutters equipped with milling station on request
gerade-for radius-, and chamfer milling
Boom, fold-down and pull out towards the front
with chassis more
|
|
2
Nordrhein-Westfalen, Deutschland
6428 km
1992
good (used)
- Edge band thickness up to 5 mmm- heated infeed ruler- pneumatic roll cutter- hot melt glue basin (granules)- saw-cut unit- flush milling unit- round milling unit- chassis
Cpjpy3ys more
|
|
5
Barntrup, Germany
dealership location
6496 km
1999
used
single sided egde banding machine Brand: BRANDT Type: KD 99 F Year: 1999Price: 12.500,00 € + VATSpecial price: 9.900,00 € + VAT With Ligmatech workpiece return type: ZHR 15 Technical data: Electrical interface LIGMATECH ZHR 15 V-belt top up to 1500 mm (installing) length Infeed fence adjustable Special infeed fence for the process of laminate overhangsMin. workpiece thickness: 16 mmMax. laminate overhang: 5 mm Program controlled adjustment infeed fence Program controlled adjustment pressure zon... more
|
|
6
Edge banding machine with hot-melt adhesive specification by means of glue basin located below. Edge thickness 0.4 - 5 mm, panel thickness 10 - 60 mm, jointing milling unit with co-rotating and counter-rotating milling cutter DIA, cross-cut saw unit, combination flush and radius milling unit, radius scraper unit, polishing unit, feed speed approx. 9 m/min., machine length overall 3,742 mm.
Cwachppc more
|
|
5
Wiefelstede, Germany
dealership location
6377 km
used
Edge grinding, edge grinder, grinding machine
Grinding height 75 mm
Grinding length 390 mm
Dimensions 300/780/H520 mm
Weight 40 kg
Vmsb0 more
|
|
8
Second-hand machine
Built in 2005
for pre-coated edging material
Heater power 3000 Watt
manual adjustment of aggregate
Stc3ko
Edge thickness 0.4-2 mm
Workpiece height 10-45 mm
Feed speed 5 m / min
Total connection: 4 KW
Location: Off the shelf 54634 Bitburg
-free load- more
|
|
2
Second-hand machine
Year of construction: 1989
State: normal
Edgebander for pre-coated edging material
High performance hot air blower
Roles capping
Laminate trimmer
End capping
Feed
Boom, on both sides
Tower cars
Max edge thickness 1 mm
maximum workpiece height approx. 50 mm
min. Panel length approximately 170 mm
minimum workpiece width 50 mm
Feed about 4 m / min.
Bekxuklomd
Heating power 3 kW
Electr. Connection 230 V
Weight 95 kg more
|
|
5
Barntrup, Germany
dealership location
6496 km
2007
used
single sided edge banding machineBrand: BiesseType: Stream B1 / 8.5Year: 2007With workpiece return Standard equipment basic machine - Belt top pressure with double V profile - Electronic height adjustment of the upper pressure - Inverter for the feed chain speed - Own inverter for each unit - PC user interface Windows XP - Statistics software with export option in Excel - Unlimited log files - Suction device installed in the machine bed Workpiece support Width adjustable auxiliary support cons... more
|
|
5
Bünde, Germany
dealership location
6452 km
used
saw blade diameter 600 mm
workpiece-spindlehead motor 0,3 kW
grinding wheel diameter 180 mm
grinding wheel size 180 x 20 x 28 mm
weight of the machine ca. 65 kg
dimensions of the machine ca. 0,62 x 0,64 x 1,01 m
Beocfnfr7s
Condition: ready for operation
Electric 380 Volt
Saw blade sharpening machine, lifting speed 40 or 75 teeth / min,
Adjust during the grinding process. Transmission running in the oil bath,
Machine stand as tool cabinet, right-left-hand drive.
Machine dealer with own st... more
|
|
5
Wiefelstede, Germany
dealership location
6377 km
used
Double end Tenoner, edge banding machine, Ritz motor, Zer chip er motor, spindle motor, milling motor
Voltage 400 Volt
-1 x motor 0.18 kW 10800 rpm at 200 Hz
Recording conical 18 to 19 mm
Right thread M10
-1 x engines available
Vwfmg
Award pieces
Dimensions 195/70/H90 mm
Weight 2,0 kg more
|
|
10
Edge banding machine single sided
Manufacturer: RS engineering
Type: MS 270
Year of construction: 1995
Technical data:
for gluing pre-coated edging materials up to 3 mm thickness of plastic, wood and similar materials
Engine capacity: 3.25 kW
Workpiece thickness: 8-40 mm
Vorschubgeschw.: 0-7 m / min., electrics: 230 / 400 V, 50 Hz;
Hot air blower
Dvhrrlb
Location: Off the shelf 54634 Bitburg more
|
|
4
Hochheim am Main, Germany
dealership location
6537 km
2007
used
Second-hand machine
Built in 2007
Jbugwloi8
Condition: very well maintained
for pre-coated edging material
Heater power 3000 Watt
manual adjustment of aggregate
Edge thickness 0.4-2 mm
Workpiece height 10-45 mm
Feed speed 5 m / min
Availability: short term
Location: Solingen more
|
|
5
With veneer sanding device and belt oscilation also inclinable and circular sanding device
Bfunfvvswx more
|
|
5
Barntrup, Germany
dealership location
6496 km
1993
used
Edge milling and sanding machine
Brand: IMA
Type: Combima/N/I/R80/760/V
Year: 1993
Fix stop side left
Top pressure with wide v-belt
1 Main stand
equipped with:
1 Milling unit with motor 4,4 / 6,6 KW
50/100 Hz - 2860 / 5870 rpm.
pneumatic adjustable
swivable
With manual adjustments, displayed via Siko counters
- vertical, horizontal swivel
1 Milling unit with motor 4,4 / 6,6 KW
50/100 Hz - 2860 / 5870 rpm.
pneumatic adjustable
swivable
With manual adjustment, displayed via Siko counters
- ver... more
|
|
6
Hessisch Lichtenau, Germany
dealership location
6567 km
2009
used
Edge chamfering machine, edge milling machine MAKRA type KEG 400
Edge crusher, deburring machine, edge deburring machine
for aluminium and plastic processing and small chamfers in steel.
Built: 2009
Bevel size: 0-6 mm
Material support: 90° x 400 mm
Engine speed: 8000 to 30000 rpm.
Engine power: 1050 watts
Mains connection: 380 volts, 50 Hz
- infinitely variable motor speed
- Milling motor with collet holder of 8 mm
- Workpiece support, guide rails hardened
- Chip collecting bowl
Weight: 10 kg
B... more
|
|
3
Wiefelstede, Germany
dealership location
6377 km
used
Wedge bar chucks, power operated chucks, three-jaw Chuck, three-jaw Chuck
Cabaoqr2
Chuck size ø 220 mm
Recording cone Ø mm
Recording bolt circle diameter mm
Bore 50 mm
JAWS
Weight 25 kg more
|
|
0
Paul BM / R Edger160mm cutting height750mm passage1 fixed and 1 movable saw New electric controlMotor 55kW
Bfuk3cdfda more
|
|
6
Hochheim am Main, Germany
dealership location
6537 km
1988
used
Second-hand machine
Year of construction: 1985
Condition: age-appropriate
Nldef
Machine length 3750 mm
Machine width 850 mm without roll Edition
Machine height 1280 mm
Edge thickness 0.4-8 mm
Edge height of 51 mm
Workpiece thickness 6-45 mm
Feed 11 m / min
with fully automatic Kantenzufürhrung
with glue job station cartridge
with Kappagregat with 2 motors
with flush trimming unit
with RADIUS trimming unit
Weight approx. 750 kg more
|
|
13
One-sided automatic edge banding machine with pre-milling
unit, direct glue application to straight workpieces (EVA-PUR
Glue pot with run-out function/optional), HF-cut-off saw station,
HF-top and bottom milling unit, chain feed, double roller
top pressure, extendable work piece support, signal lamp
for work piece sequence and synchronisation of working units
by encoder. For ABS, PVC, melamine and strong wood veneer
roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm
and of 8 – 60 mm wo... more
|
|
5
Edge banding machine
Brand: Homag
Type: Optimat KL 78/A20/S2
Year: 1999
Panel size:
Thickness: 10-60mm
Yv2fakmfl
min: 10 mm (milling)
min: 12 mm (edging)
max: 60 mm
Profiles/Finishing
1 sided milling
1 sided melamine/kraftpaper edging
1 sided ABS 0.4-1.3mm edging (chamfer milling 20°)
1 sided ABS 1.4-2.0mm edging (radius milling R2)
Vertical grooving
Total length: approx. 9m
Equipment:
Precision-cutting, gluing unit with pre-melt for hot-melt,
1x main- and 6x re-pressure rollers, end trim... more
|
|
10
Rosmalen, Netherlands
6272 km
2015
excellent (used)
SCM Olimpic K400 Edgebander
Technical data:
• Panel thickness 8-60 mm
• Edge band thickness on a 0.4-6 mm roll
• Minimum workpiece length 140 mm
• Glue pot + extra Gluepot
• Transfer speed 11 m / min
• Sawing unit Yes
• Milling unit Yes
• Circular unit Yes
• Radius scraper unit Yes
• Flat scraper unit Yes
• Cleaning fluids Yes
• Extractor diameter 80, 4 pieces
Bfosx2ef7f
• Voltage 380 volts
• Dimensions LxWxH 3349 x 1305 x 1498 mm
• Weight 1327 kg
• CE Yes
• Year of construction 2015
• Machine... more
|
|
5
Wiefelstede, Germany
dealership location
6377 km
used
Wedge bar chucks, power operated chucks, three-jaw Chuck, three-jaw Chuck
Chuck size ø 216 mm
Recording recess mm
Bolt circle diameter mm
Bore 50 mm
M8h3z
Switch JAWS
Dimensions ø 216/H75 mm
Weight 18.7 kg more
|
|
8
Hohenstein-Bernloch, Germany
dealership location
6682 km
1997
used
0,4-8 mm
material thickness 45 mm
length 4.500 mm
Bfstz2kswh more
|
|
6
Hochheim am Main, Germany
dealership location
6537 km
1988
used
Second-hand machine
Year of construction: 1988
Condition: age-appropriate
To glue er strength 0.3-13 mm
To glue er length of min. 200 mm
Workpiece width of min. 85 mm
Workpiece length of min. 180 mm
Workpiece thickness 6-45 mm
Feed rate 13 m / min
electrical power 7 kW
Machine length 4430 mm
Machine width 1020 mm
Machine height 1200 mm
fully automatic with edge feeder 1901
with glue job station cartridge
with end-trimming unit 1976
Muljyg
with milling unit in 1942 to the flush m... more
|
|
|
