Used Edge Glue for sale (4,312)

Condition: used, Edgebander Robland 575 Pre-milling cutters Glue application by roller Gsdjyt Ic Sopfx Ahyjip Pneumatic pre-cut guillotine Pressure rollers Finishing trimming saws Milling unit top-bottom R1 – R2 Flat scraper Machine length with table: 250 cm Feed speed: 5.5 m/min Max edge thickness: 2 mm Total installed power: 6.8 kW Extraction ports: 1x 80 mm, 1x 60 mm, and 1x 120 mm Machine in good condition, operates flawlessly. Possibility of inspection prior to purchase.

Condition: excellent (used), Robland KM 550 Edge Bander Glue application with roller Pneumatic pre-cut guillotine Pressure rollers Final trimming saws Top and bottom milling unit R1 – R2 Flat scraper Gjdpfx Ahsyt Hu Heyoip Machine length with table: 210 cm Feed speed: 5.5 m/min Max edge thickness: 2 mm Max panel thickness: 40 mm Weight: approx. 450 kg Machine in very good condition, operates flawlessly. Inspection and test possible before purchase.

Condition: new, Year of construction: 2025, Various glue tanks for edge banding and squaring edge banding machines. We supply new glue tanks or overhaul your used one. We also sell single spare parts. Gsdpfxof Tc Rqs Ahyjip Scm, Stefani, Idm, Ima, Biesse

Condition: new, Year of construction: 2024, functionality: fully functional, The SLV, SLH hydraulic press is intended for thick gluing of wood (window profiles, glued beams, etc.) with natural drying of glued joints. Giedpfegf A S Njx Ahyjp The work surface is equipped with hydraulic compression units and hydraulic trolleys for aligning the elements. Regulation for each segment is individual or together. Possibility to close each cylinder. The surfaces that come into contact with the adhesive are protected with stainless steel tape. The press is designed so that it is also possible to later upgrade the segments to the desired working length.

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Giodpfx Asu R S Nwehyep Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: ready for operation (used), functionality: fully functional, Machines for the production of structural packaging. Consisting of a die-cutter H-142, year 1986, size 900x1400 mm; a boxmaker by Pack Projekt (year unknown, purchased in 2009, feed width 1450 mm, additional creasing bar for vertical creasing, 350 mm slitting knife); and a gluing machine for self-adhesive tape, silicone tape dispenser and tear thread (feed 1400 mm, year 2010, hot melt glue system). All machines are used, operational, and ready for immediate use. SEE PHOTOS AND DOCUMENTS. Gisdpfx Asyan I Ijhyjp If interested in individual machines, simply send us your proposed price for the relevant machine and we will contact you.

Condition: like new (used), Year of construction: 2010, TETRA PAK A3 COMPACT FLEX 200/250 EGDE COMPLETE LINE INCLUDES: 1. TETRA PAK A3 COMPACT FLEX QUICK CHANGE 200/250 EDGE FILLER V200, YOM 2010 15.120 RUNNING HOURS CAPACITY 9.000 CARTONS PER HOUR 2. TETRA PAK ACHX 10-0400-44 HELIX CARTON ACCUMULATOR V400, YOM 2010, 17.431 RUNNING HOURS 3. TETRA PAK STRAW APPLICATOR TS30 U-FORM APGRATED V300, YOM 2010 4. TETRA PAK APPLICATOR CAP30 FLEX PRO23 V200, YOM 2010, 10.914 RUNNING HOURS 5. TETRA PAK FILM WRAPPER 32 V400, YOM 2010, NEVER USED, ONLY 45 HOURS! Godpfxoya Nf Ij Ahyjip 6. TETRA PAK CARDBOARD PACKER CBP 32 V400, YOM 2010 WRAP AROUND 7. TETRA PAK LINE CONTROLLER LC30+ 8. CONVEYORS SYSTEM 9. INC PRINTER VIDEOJET 1620 THE LINE IS IN AS NEW CONDITION. LOCATION - SWEDEN. READY FOR DISMANTLING AND SHIPPING IMMEDIATELY. PRICE UNDER REQUEST

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Book edge printing machine. Output speed: 300 books from all sides (fully printed). Suitable for printing on softcover and hardcover books, including rounded corners. 2 Epson printheads (option to add a 3rd printhead for increased print width) Print width: 66 mm Print length: 350 mm Throughput: 200 - 300 books per hour Printing: CMYK, water-based inks Durable Epson 3200 printheads Gijdpfx Ahex Akhusyep Book block air blower Rotary brush and dust extraction Guide rails for larger books Spare parts included 32 liters of ink (8L x CMYK) Training available. Service support in Europe.

Condition: used, Year of construction: 2012, operating hours: 2,815 h, functionality: fully functional, machine/vehicle number: 12SLT146060, overall weight: 21,000 kg, Equipment: steel tracks, Tracked diesel 2 shaft shredder in perfect working condition. Godpfx Ajya Hmijhysip Dimensions: Weight: 20 Tonne (22UST) Transport Width: 2.5m (8'3") Transport Length: 10.2m (33'6") Transport Height: 3.1m (10'5") Working Width: 2.5m (8'3") Working Length: 10.2m (33'6") Working Height: 4.2m (13'10") Applications All types of wood (railway sleepers, pallets) All plastics (including wind turbine blades) Commercial and industrial waste Construction & Demolition (C&D) Domestic and household waste Green waste (including grass, trees, stumps) Mattresses Paper and cardboard (including paper rolls) White household goods

Condition: like new (used), Several pieces in stock Solar inverter, Inverter 5 kW, SolarEdge SE5K-RW0TEBEN4 Manufacturer: SolarEdge Type: SE5K-RW0TEBEN4 Overall dimensions: 310 x 180 x 530 mm Built-in webserver with Ethernet connection for remote monitoring SetApp version – only the Wi-Fi antenna kit is required for communication High efficiency (max. 97.3%) Fixed conversion voltage Godpfxexukbxo Ahyjip Indoor and outdoor use (high protection class IP65) SmartGrid compatible Factory-installed MC4 connectors on the inverter 12-year manufacturer warranty, extendable up to 25 years for an extra fee Attention! The inverter operates only with SolarEdge-compatible smart modules or additional Optimizers! AC power

Condition: good (used), Year of construction: 2021, Automatic machine for the production of PVC tarpaulin covers for tent halls – sold for spare parts. Italian-made welder for tarpaulins by SolarEdge Automation Machines, manufactured in 2021. The machine has seen limited use for manufacturing PVC covers for tent structures. Gedpfx Ahox Dk H Tjyoip Machine specifications: - Material: PVC with a weight of 450 g/m2 - Material specifications: max. width – 3250 mm, min. width – 285 mm, max. roll weight – 1000 kg, max. external diameter – 600 mm - PVC or PE keder rope with a diameter of 4/5/7 mm - Minimum product length: 1500 mm - Minimum finished product width: 800 mm - Power supply: 400V The machine welds together the surfaces of two material rolls, cuts them to the required width, and thermal-bonds the keder cord to the edges of the material. The machine consists of: - 2 material feeders with automatic material position adjustment - Knives for cutting material to required width - Welding module for joining two pieces of material - Modules for fusing the keder tape to the material edges - Module for feeding and welding the keder cord with automatic tension control - Encoder for product length control - Knife for cutting the product to the set length Welding is performed with high-performance Leister hot air heaters. Components used in the machine: 1. Heaters and blowers by Leister 2. Control systems, electrical and safety components by Omron and Siemens 3. Drives and gearboxes by Seipee and Nidec 4. Pneumatic systems by Festo and SMC 5. Vision system by HIKVISION 6. Linear guides and carriages by HIWIN Machine is only sold as a complete unit!

Condition: excellent (used), Year of construction: 2019, operating hours: 4,733 h, functionality: fully functional, fuel: diesel, Three fraction air separator + additional suction fan for midfraction. One owner machine. Giodov Aailopfx Ahysp

Condition: excellent (used), NORDSON PROBLUE 7 HOTMELT GLUE UNIT IN EXCELLENT CONDITION Gedpfx Aortnv Djhysip

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,935 mm, workpiece height (max.): 250 mm, number of axes: 4, number of spindles: 40, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of vertical drilling spindles: 28 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 8 Total number of drilling spindles: 40 Total number of tool change positions: 22 Number of suction traverses: 10 Milling unit Number of axes: 4 Gjdpeyqzrnefx Ahyoip Motor power: 10.5 kW Automatic tool changer Edge banding unit Gluing unit Tool magazine Grooving unit Number of positions in tool magazine: 22 MACHINE DETAILS Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Safety net Chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods before collection and shall be responsible for the installation, securing, and use of the machine at the place of destination. External reference: 8011

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, workpiece height (max.): 90 mm, workpiece width (max.): 3,200 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units on the left side: 5 Milling unit (AS10) Double finishing cutter, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (rough) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device Giodpfx Aeyq Avhehyjp TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm FEATURES Feed chain with carriers Pressure applied via rubber belt Panel guide rails with NC positioning Edge roll magazine with 6 positions Hot melt adhesive system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on upper cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Giedpfx Ahswuz Ekoyjp Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: used, Year of construction: 2020, total height: 1,670 mm, total length: 6,000 mm, total width: 1,410 mm, Weight: 2.200 kg Price: On request - Year: 2020 - Documentation available: No Gisdpfox Hfyiex Ahyjp - CE marking present: Yes - CE certificate present: No - Serial number: 20.082 - Number of units [pcs]: 10 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Fine milling unit - - Tools available: Yes - └ 8th unit type: Corner rounding unit - - Tools available: Yes - └ 9th unit type: Radius scraping unit - - Tools available: Yes - └ 10th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Power [kW]: 16.2 - Transport dimensions: 6000mm x 1415mm x 1670mm (l x w x h) - Transport weight [kg]: 2200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2011, Price: On request - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH/335516 - Number of units [pcs]: 12 - └ 1st unit type: Spraying device - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes Godpfxsyudwzo Ahyjip - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Tools available: Yes - └ 9th unit type: Flat scraping unit - - Tools available: Yes - └ 10th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 68 - Fuse [A]: 68 - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2013, total height: 1,700 mm, total length: 4,800 mm, total width: 900 mm, Weight: 1.250 kg Edgebander Serial number: 200.04.007.13 400V 11kW 3PH 50HZ 28A multifunction trimming unit Glue unit Workpiece height 8-60mm - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: 200.04.007.13 - Transport dimensions: 4800mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Gisdpfx Aewlv D Njhyep

Condition: used, Year of construction: 2000, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical data  Capacity: 21,000 bottles per hour (bph) Bottle Formats: 1.5 L and 0,5 L  Worked Labels: IN REEL two label-roll magazines, one applicator Run Time: Approx. 39,000 hours Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) working direction: left-right/clockwise  bottle infeed/outfeed parallel on one side of the machine best-before date coding is available (Videojet Excel 170i Ultra High Speed) Gsdpfx Aheyudr Esyoip

Condition: used, Year of construction: 2015, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  manufacturer: Krones, Germany model: Contiroll HS 810-720     year of manufacture: 2015 neck handling machine, modification possible formats: 1,5L and 2,0L labelling applicators: 1 (wet-glue head), 2 magazines operation Direction: Right-machine,  production Capacity: 50.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Gsdpjyhgwdjfx Ahyoip

Condition: used, Year of construction: 2015, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  manufacturer: Krones, Germany model: Contiroll HS 810-720     year of manufacture: 2015 neck handling machine, modification possible formats: 1,5L and 2,0L labelling applicators: 1 (wet-glue head), 2 magazines operation Direction: Right-machine,  production Capacity: 50.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Gsdpfxoyhgvgo Ahyeip

Condition: used, Year of construction: 2012, Overview  This cold glue labeller was manufactured in 2012 by German company KRONES AG. The TOPMATIC is equipped with 42 bottle stations (pitch 125 mm) and was operated on 330 ml bottles. The machine is still installed with energy disconnected, stopped since September 2025, and can be visited on request. It has 48,121 operating hours. Regular maintenance was carried out (two overhauls per year), with the last overhaul in week 4/2025. No upgrades were made apart from replacing obsolete parts. Technical data  Capacity: Max. 60,000 bph Nominal 43,000 bph Formats: 330 ml Labelling technology: Cold glue Configuration: 42 bottle stations Pitch: 125 mm Inspection: Label inspection system CHECKMAT (Krones) Dimensions: approx. 430 × 340 × 245 cm Power supply: 400 V, 20 A, 14 kW Gjdpsyidmcofx Ahyeip

Condition: used, Year of construction: 2012, total height: 1,600 mm, total length: 5,250 mm, total width: 1,440 mm, Weight: 1.550 kg Edgebander HEBROCK AKV 3006 DK FS maximum edge thickness 3/8 mm min/max. workpiece thickness 10/40 mm min. workpiece length approximately 200 mm Gedpfx Ahjwnhb Seyoip min. workpiece width approx. 80 mm feed speed about 10 m/Min. ready in about 6 minutes. maximum power consumption 12 kW electrical connection 400 V / 3 Ph / 50 Hz Pre-mill Glue unit Pressure roller Chopping saw Milling unit Milling unit Corner rounder Radius scraper Flat scraper Cleaning unit Dimensions (length x width x height) 5250x1445x1600 mm, weight 1550kg - Year: 2012 - Documentation available: No - CE certificate present: No - Transport dimensions: 5250mm x 1445mm x 1600mm (l x w x h) - Transport weight [kg]: 1550kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2011, Overview This KRONES Topmatic labelling machine was manufactured in 2011 and was previously operated in a returnable glass production line. The machine is designed as a head machine with parallel bottle infeed and discharge and is suitable for high-speed labelling applications. The system is equipped with two labelling aggregates: one for neck and front labels and one for back labels. The neck label is applied using hot glue for closure sealing, while the remaining labels are applied using cold glue. The machine is fitted with two glue pumps and includes one spare hot glue unit. The back labelling station is disengageable, while the front station is permanently installed. With 36 bottle plates and a production capacity of up to 33,000 bottles per hour, the machine is suitable for demanding returnable glass operations. The machine has accumulated approximately 44,350 operating hours as of January 2025. Spare parts documentation is available.   Technical Data Manufacturer: KRONES Model: Topmatic Year of manufacture: 2011 Machine type: Rotary cold glue / hot glue labelling machine Bottle plates: 36 Capacity: up to 33,000 bottles per hour Direction of operation: Parallel bottle infeed and discharge Bottle type: Returnable glass bottles Operating hours: approx. 44,350 h (as of January 2025) Labelling stations: 2 labelling aggregates 1 × Neck and front label station 1 × Back label station (disengageable)   Glue system: 2 glue pumps Hot glue for neck label (tamper-evident / closure sealing) Cold glue for front and back labels 1 spare hot glue unit included Dimensions: Depth: 4,300 mm Width: 3,300 mm   Electrical supply: 400 V / 230 V, 3~ / N / PE, 50 Hz, 22 A Documentation: Spare parts documentation available Condition: Used, already dismantled and stored   Gedjyt Iltepfx Ahyjip