Used Edge Off for sale (4,712)

Condition: like new (used), Several pieces in stock Kedjxukbxepfx Ab Uedw Solar inverter, Inverter 5 kW, SolarEdge SE5K-RW0TEBEN4 Manufacturer: SolarEdge Type: SE5K-RW0TEBEN4 Overall dimensions: 310 x 180 x 530 mm Built-in webserver with Ethernet connection for remote monitoring SetApp version – only the Wi-Fi antenna kit is required for communication High efficiency (max. 97.3%) Fixed conversion voltage Indoor and outdoor use (high protection class IP65) SmartGrid compatible Factory-installed MC4 connectors on the inverter 12-year manufacturer warranty, extendable up to 25 years for an extra fee Attention! The inverter operates only with SolarEdge-compatible smart modules or additional Optimizers! AC power

Condition: new, Year of construction: 2024, functionality: fully functional, working width: 14,000 mm, total length: 17,420 mm, total width: 14,000 mm, total height: 4,850 mm, overall weight: 37,000 kg, New scalping screen available from stock. Kjdpfev A S Nkjx Ab Ujdw Edge S18 Dual Power. See brochure with all (technical) details. Shaking sieve, scalping screen, vorsieb

Condition: excellent (used), Year of construction: 2019, operating hours: 4,733 h, functionality: fully functional, fuel: diesel, Three fraction air separator + additional suction fan for midfraction. One owner machine. Kdjdpfev Aailjx Ab Ujw

Year of construction: 2023, operating hours: 1,200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 23TRT620048, EDGE TRT 620 demo machine - Immediately available Year of construction: 2023 Hours: 1050 Equipped with the following options: - Remote control - Magnetic belt on the fine fraction - Load control on the bunker belt - Fine fraction belt 180 degrees rotatable - Reversing fan Kdsdpfjv Ewz Rsx Ab Uow Drum screen / drum screen / drum sieve

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 1,500 kg, fuel type: electric, fork length: 1,150 mm, drive type: Elektro, Low lift truck Condition: As good as new Technical condition: New Front tires type: Polyurethane Rear tires type: Polyurethane Kedpfx Ajvzzl Eob Usdw Support rollers, lithium-ion battery, 12 month guarantee

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 220.01.016.22, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, rotary table diameter: 750 mm, rotational speed (max.): 12,000 rpm, The machine is being auctioned due to a business closure! Further details on the machine’s equipment can be found in the attached order confirmation. TECHNICAL DETAILS Workpiece height: 8–60 mm Rotary table edge magazine diameter: 750 mm Edge banding material (coil): 0.4–3 mm Rotary table diameter for coil edge material: 740 mm Support surface (workpiece infeed): 600 mm Spindle speed of diamond pre-milling unit: 12,000 rpm Feed speed, chain feed: 10 and 18 m/min Spindle speed, cross-cut saw unit: 12,000 rpm Upper multifunctional milling unit speed: 12,000 rpm Lower multifunctional milling unit speed: 12,000 rpm Cutter assembly: 64 mm MACHINE DETAILS Electrical data Voltage: 400.0 V Phases: 3 Frequency: 50/60 Hz Current: 28.0 A Power: 15.0 kW EQUIPMENT Kjdpfxjxwt Nqj Ab Ujdw Ball bearing rotary table for edge banding coil material Workpiece infeed and feed fence with manual adjustment Chain feed with two speeds Edge feeding for coil and strip material in single feed Upper and lower multifunctional milling unit x-motion PLUS via smartouch Upper and lower radius scraper blade x-motion PLUS Corner rounding unit with motorized adjustment for postforming and softforming profiles Upper and lower polishing units Pneumatic-mechanical infeed stop for workpiece gap monitoring glueBox application unit

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 06601, feed rate X-axis: 12 m/min, empty load weight: 2,500 kg, Equipment: CE marking, TECHNICAL DETAILS Maximum edge banding thickness: 12 mm Minimum workpiece thickness: 10 mm Maximum thickness of roll material: 3 mm Feed speed: 12 m/min Heating time: 10 min Guillotine for trimming: 0.2 – 3.0 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,500 x 1,000 x 1,600 mm Weight: 2,500 kg EQUIPMENT Jointing unit with 2 milling units Automatic roll magazine Solid edge magazine Pre-heating of panels by infrared heater Automatic gluing with granulate glue pot Cross-cut saw with programmable angle setting Multi-function unit Corner rounding/copying unit with 2 motors Profile scraper Flat scraper Buffing unit Unit indicator with mechanical numeric display Ksdpfxsxuqwms Ab Uodw Control via operator panel Operation via selector switch / push buttons Protective hood CE marking

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, workpiece height (max.): 50 mm, workpiece length (max.): 200 mm, workpiece width (max.): 2,500 mm, rotational speed (max.): 18,000 rpm, Equipment: CE marking, TECHNICAL DETAILS Panel width max.: 2,500 mm Panel width min.: 130 mm Panel height max.: 50 mm Panel height min.: 8 mm Panel length max.: 200 mm Panel length min.: 30 mm UNITS Sizing unit Unit: Trimming Unit: Corrections automatic engagement based on timer Motor power: 2.2 kW Max. speed: 6,000 rpm Magazine for coil Number of positions: 1 Gluing system Glue pot for polyurethane adhesive Prefuser for polyurethane adhesive Prefuser for polyurethane adhesive D4-e Edge pressure roller track Number of pressure rollers: 4 Edge processing unit 1 Unit: Top router Number of motors: 1 Motor power: 0.7 kW Max. speed: 18,000 rpm Edge processing unit 2 Unit: Top router Number of motors: 1 Motor power: 0.7 kW Max. speed: 18,000 rpm Edge processing unit 3 Unit: Hot air blower Model: APPLICATORE DI FILM Motor power: 0.1 kW Edge processing unit 4 Unit: Brush Number of motors: 2 Edge processing unit 5 Unit: Top router Number of motors: 1 Edge processing unit 6 Unit: Top router Number of motors: 1 Kdsdpjxxavtefx Ab Ujw MACHINE DETAILS Installed total power: 12 kW Adhesive system: PUR Pressure type: rubber-coated belts Number of units installed in sizing: 1 Number of units installed in edge processing: 6 EQUIPMENT Spraying unit CE marking

Condition: used, Year of construction: 2019, operating hours: 5,400 h, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2019 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AH00000939 - Operating hours: 5400 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets Kjdpfjxxlrgsx Ab Uodw

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating modes automatic edge magazine for coil material and fixed lengths Kdodpfoxya Rtox Ab Ujw Pressure zone with pneumatically-driven main pressure roller and special post-pressure rollers to compact the upper and lower glue joint Centrally adjustable upper pressure Central manual chain conveyor lubrication Control panel at machine infeed End trimming unit (saw aggregates) for front and rear edge overhang with high-precision linear guides 2 motors, each 0.18 kW Swivel range for straight and bevel cutting 0–15 degrees Flush-milling unit, top and bottom, with vertical and horizontal tracing Swivel range 0–15 degrees with 2 milling motors, each with replaceable insert cutter combinations (straight/radius) Digital counters enable rapid and precise, i.e., repeatable, settings Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for finishing processing with horizontal/vertical tracing Support table extendable up to 350 mm Integrated section control for contactless operation of processing functions. Settings via keyboard and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Availability: short term Location: Flörsheim

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Kdedoxyiilspfx Ab Usw

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 80709, plate height: 45 mm, empty load weight: 2,900 kg, operating speed: 333 mm/s, Equipment: CE marking, TECHNICAL DETAILS Maximum panel thickness: 45 mm Edge band thickness: 13-60 mm Kdsdpfx Aexuqufjb Usw Maximum edge material thickness in rolls: 3 mm Minimum panel width: 50 mm Minimum panel length: 150 mm Working speed: 10 - 20 m/min MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,950 mm x 1,700 mm x 1,530 mm Weight: 2,900 kg EQUIPMENT Glue pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting edge trimming and chamfering unit RI 700 Compact edge scraper RBK501 Brushes SP700 Edge sanding unit LV 700 Heated infeed guide PLC control Panel support guide Large-diameter roll holder Edge cutting device for 3 mm thick rolled edges CE certification

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 20 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 20 m/min Panel height min.: 8 mm Panel height max.: 60 mm Panel length min.: 150 mm Panel width min.: 65 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Pre-cutting unit Unit: Corrections Edge pre-heating lamps Glue application system Glue pot for polyurethane adhesive Pre-melter for polyurethane adhesive Edge pressure roller track Number of pressure rollers: 6 End trimming unit Model: 08.415 Number of motors: 2 Motor power: 0.66 kW Max. speed: 12,000 rpm Top/bottom trimming unit Model: 08.0555 Number of motors: 2 Motor power: 1 kW Multifunctional unit Model: SKF-L Kdjdpfxoxxaucs Ab Uew Number of motors: 4 Max. machining speed: 20 m/min Motor power: 0.18 + 0.400 kW Speed: 12,000 rpm Edge scraping unit Model: 08.519 Glue scraping unit Model: 08.521 Buffing unit Model: 08.617-2 Number of motors: 2 Motor power: 0.18 kW MACHINE DETAILS Number of operating units: 8 Adhesive system: PUR Control system: WINDOWS EQUIPMENT Programming software for the machine: ICOS open TS CE marking

Condition: used, Year of construction: 2013, total length: 4,800 mm, total height: 1,700 mm, total width: 900 mm, Weight: 1.250 kg Price: On request Edgebander Serial number: 200.04.007.13 400V 11kW 3PH 50HZ 28A multifunction trimming unit Glue unit Workpiece height 8-60mm - Year: 2013 Kdsdpfx Aewlv D Nob Ujw - Documentation available: No - CE certificate present: No - Serial number: 200.04.007.13 - Transport dimensions: 4800mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1250kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical specifications: - Round tank glue application unit - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front/end trimming - Top/bottom milling units: 2 milling units with copy wheels for radius or chamfer - Radius scraper: pneumatically controlled, for post-processing radii - Surface scraper: for smoothing the edge surfaces - Buffing unit: 2 buffing wheels with motors for final finishing - Riepe spraying device - Control: PLC with operator panel - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Kedpfjxdpm Sox Ab Uodw Machine dimensions: approx. 6120x840x1385 mm Machine weight: approx. 3,000 kg Availability: Short notice Location: Bavaria

Condition: used, Year of construction: 2008, - Control system via a 15-inch color touch monitor for full automation and maximum operator comfort - CombiMelt gluing system suitable for processing EVA and PUR hot-melt adhesives as well as all common cleaning granules Kjdpfexyig Djx Ab Uedw - Joint processing unit for attaching chipboard panels - Automatic roll magazine - Automatic edge magazine - Double end trim unit with automatic swiveling 0° / 3° - Flush milling unit for flush trimming up to 12 mm - Fine radius milling – profile cutter R2 - Automated copy milling – corner rounding - Surface scraper unit - Lubricant spray system - Very stable workpiece support with roller conveyors – FRONT with scissor extension - Complete tool set included - Machine is in exceptionally well-maintained condition - Initial commissioning in 2008, very few operating hours (approx. 1,700) - Dimensions approx. 6160 x 1400 mm Location: Customer

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, feed rate X-axis: 40 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 3,000 mm, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Max. feed speed: 40 m/min Panel width min.: 240 mm Panel width max.: 3,000 mm Panel height min.: 8 mm Panel height max.: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3.5 mm UNITS Format Cutting Unit Unit: Double top and bottom pre-milling unit Model: KD 11 Motor power: 4.5 kW Max. speed: 6,000 rpm Magazine for edge tape Kdsdpfx Abjxxal Io Uew Number of positions: 12 Gluing system Glue pot for polyurethane adhesive Pre-melter for polyurethane adhesive Edge pressure roller conveyor Edge Processing Unit 1 Unit: End trimming Number of motors: 2 Edge Processing Unit 2 Unit: Top milling unit Number of motors: 2 Edge Processing Unit 3 Unit: Edge trimming unit Number of motors: 2 Edge Processing Unit 4 Unit: Edge trimming unit Number of motors: 2 Edge Processing Unit 5 Unit: Top milling unit Number of motors: 2 automatic engagement by time Edge Processing Unit 6 Unit: Edge scraper Edge Processing Unit 7 Unit: Glue scraper Edge Processing Unit 8 Unit: Brush Number of motors: 2 FEATURES PUR gluing system

Condition: used, Year of construction: 2014, Used Machine Single-sided Edge Banding Machine Brandt Optimat KDF 220 C (Ambition 1220 FC) Year of manufacture: 2014 Machine number: 0-261-20-7913 Fixed fence on the right side Infeed fence adjustable manually Feed speed: 11 m/min Max. feed speed with contour trimming: 11 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Workpiece and edging parameters: Minimum workpiece width: - For workpiece thickness 8-22 mm: 70 mm - For workpiece thickness 23-60 mm: 120 mm Workpiece overhang: 38 mm Kdodpfx Abexx D D Uo Uow Workpiece thickness: 8 - 60 mm Max. edge height = workpiece height + 5 mm Edge material in roll form: 0.4 - 3 mm Max. edge cross-section: - For PVC: 135 mm² - For veneer: 100 mm² Max. roll diameter: 830 mm Edge material in strip form: 0.4 - 3 mm Max. edge cross-section (strip): 165 mm² Edge thickness up to 6 mm possible by adjusting the pressure zone Equipment configuration: Jointing cutter unit 2 x 2.2 kW 200 Hz (with and against feed) Gluing unit A3 with workpiece pre-heating End trimming unit, chamfer/straight 2 x 0.18 kW Milling unit 2 x 0.27 kW (counter rotation) Contour copying router unit (corner rounding) 1 x 0.35 kW WD 40 Profile scraper with quick-change heads Glue joint scraper 5820 Control system: Easytouch Dimensions: approx. 4280 x 1300 x 1170 mm Weight: approx. 1,400 kg Availability: short notice Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, feed rate X-axis: 25 m/min, workpiece width (max.): 1,000 mm, workpiece height (max.): 180 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Max. feed speed: 25 m/min Operating Unit 1 Ksdpfoxw U Eaex Ab Uedw Unit: combined roller/pad Roller material: rubber Operating Unit 2 Unit: vertical pad MACHINE DETAILS Motor power: 1.2 kW EQUIPMENT Work table with fixed height Working level Feed belt

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 1,300 mm, workpiece length (max.): 3,200 mm, Equipment: CE marking, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 320 mm Maximum panel length: 3,200 mm Minimum panel width: 150 mm Maximum panel width: 1,300 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Number of working units: 8 UNITS Trimming Unit 1 Function: Sizing Model: RT30 Motor Power: 3.5 kW Max. speed: 9,000 rpm Edge Processing Unit 1 Function: End Trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Function: Edge Milling Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Function: Multifunction Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Function: Profile Scraper Model: RB40 Edge Processing Unit 5 Ksdpjxw T Tpofx Ab Usdw Function: Glue Scraper Model: RC20 Edge Processing Unit 6 Function: Brushing Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Installed total power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing cutters Multifunction unit Top pressure Pressure via rubberised belts Panel support guide NC positioning Angled panel infeed system Automatic engagement by time Edge preheating lamps Coil magazine Hot-melt glue pot Hot-melt glue pre-fuser Edge pressure roller conveyor Spray unit SINTRA machine programming software Panel discharge via roller transfer conveyor Panel feed via motorised carpet belt Return system for left-side edge bander CE marking

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 25 m/min, edge thickness (max.): 3 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 Kdsdpfxsxw T H Ns Ab Uew automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Router Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spraying unit Machine programming software PowerControl PC22 CE marking

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, rotational speed (max.): 10,960 rpm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum panel thickness: 50 mm Minimum panel height: 8 mm Maximum panel height: 50 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of positions: 1 Unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time: yes Motor power: 0.18 kW Speed: 10,800 rpm Unit 2 Unit: Edge milling Number of motors: 2 Automatic engagement by time: yes Motor power: 0.27 kW Speed: 10,960 rpm Unit 3 Unit: Edge scraper Control system: BFS MACHINE DETAILS Installed total power: 4 kW EQUIPMENT Upper pressure Kedpfxsxw Tugo Ab Ujdw Pressure by spring-loaded rollers Panel support guide Magazine for the coil EVA glue system Hot-melt glue pot Edge pressure roller track Number of pressure rollers: 3 CE marking

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, feed rate X-axis: 11 m/min, workpiece height (max.): 40 mm, edge thickness (max.): 6 mm, rotational speed (max.): 12,000 rpm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 11 m/min Maximum panel thickness: 40 mm Min. panel height: 8 mm Max. panel height: 40 mm Kdsdpoxw Ttvjfx Ab Uow Min. edge thickness: 0.3 mm Max. edge thickness: 6 mm Maximum spindle speed: 12,000 rpm MACHINE DETAILS Trimming unit Unit: Format cutting Unit: Trimming Automatic engagement by time Motor power: 2.2 kW Edge heating lamps Coil magazine Number of positions: 1 Gluing system Hot melt glue pot Edge pressure roller conveyor Number of pressure rollers: 3 Edge processing unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time Motor power: 0.18 kW Maximum speed: 12,000 rpm Edge processing unit 2 Unit: Top/bottom trimming Number of motors: 2 Motor power: 0.27 kW Maximum speed: 12,000 rpm Edge processing unit 3 Unit: Multifunction Number of motors: 1 Motor power: 0.35 kW Maximum speed: 12,000 rpm Edge processing unit 4 Unit: Scraper Edge processing unit 5 Unit: Buffing Number of motors: 2 Motor power: 0.1 kW Total installed power: 13 kW EQUIPMENT Control system: PC 16 CE marking

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, feed rate X-axis: 11 m/min, edge thickness (max.): 3 mm, plate height: 60 mm, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum feed speed: 11 m/min Maximum panel thickness: 60 mm Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum panel width: 70 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of working units: 5 Maximum rotation speed: 12,000 rpm MACHINE DETAILS Unit: Pre-trimming unit Unit: Finishing/Adjustment unit Automatic engagement by time: yes Motor power: 2.2 kW Edge pre-heating lamps Coil magazine Number of positions: 1 Adhesive system Glue pot for hot-melt glue Prefuser for hot-melt glue Edge pressure roller track Number of pressure rollers: 3 with NC positioning Edge processing unit 1 Unit: End trimming unit Number of motors: 2 Maximum processing speed: 11 m/min Motor power: 0.18 kW Maximum rotation speed: 12,000 rpm Edge processing unit 2 Unit: Edge milling unit Number of motors: 2 with NC positioning Motor power: 0.55 kW Maximum rotation speed: 12,000 rpm Edge processing unit 3 Unit: Edge scraper Edge processing unit 4 Unit: Glue scraper Total installed power: 13 kW EQUIPMENT Ksdpsxw Tngefx Ab Ujdw Control system: EASY CONTROL EC 10+ CE marking

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Kedpfxjwuz Ekj Ab Uodw Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16