Used Tooth Edges for sale (4,521)

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N Pgsdpfezk Nmrox Ab Teu - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 1,600 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 12 mm, height adjustment type: electric, Equipment: CE marking, documentation/manual, SCM Group -STEFANI: 4-sided edgebander complete machine line (2x double-sided edgebanders with vacuum loading, turning unit, drilling and vacuum unloading,) 1. SCG - Vacuum feeder with roller conveyor 2. STEFANI Evolution SSB - double-sided edgebander 3. MAHROS - part turning unit (turning parts by 90°) 4. STEFANI Evolution SSB - double-sided edgebander 5. BIESSE - drilling machine 6. SCG - Vacuum unloading with roller conveyor + including 4x NORDSON units for PUR glue application -All parts/units were made in Italy. Pgodpe Afbuhefx Ab Teu -During the operation the machine line was used only with EVA type of glue. The PUR gluing units have not been used and they are in a brand new condition - applicators on the machine and the 4 NORDSON units. -Please, find the technical parameters in the PDF bellow.

Condition: excellent (used), Year of construction: 2018, operating hours: 4,832 h, functionality: fully functional, machine/vehicle number: 2017058, total length: 7,000 mm, total width: 1,800 mm, overall weight: 5,650 kg, Montresor LOLA 10.8 DX edge grinding machine • Belt running direction: RIGHT to LEFT, year of manufacture: 03/2018, #2017058 • In excellent optical and technical condition – only 4,832 operating hours • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support Pjdoz Rk E Uepfx Ab Tjgu • 3 pneumatic lower and 3 upper chamfer supports • Belt infeed: motorized calibrating/profiling support • Belt outfeed: motorized water-jet support • Automatic centralized oil and grease lubrication • Double-row table extension console • Space requirement approx.: 700 x 180 cm, infeed and outfeed path: 200 x 60 cm Optional services available, such as: freight, installation, and training Pricing • EXW from the machine location, plus VAT, subject to prior sale, does not include tools, attachments, and accessories; items shown in the pictures are not included with the machine/scope of delivery. Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty • Machine sold "as is" with exclusion of all warranty claims Inspection possible • at the facility near Rosenheim Availability • after delivery of the new machine, approximately January/February 2027

Condition: like new (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 590, type of input current: three-phase, table length: 1,000 mm, overall weight: 480 kg, height adjustment type: hydraulic, input voltage: 400 V, grinding belt length: 3,200 mm, grinding belt width: 200 mm, input frequency: 50 Hz, The HOUFEK HB 1000 edge sanding machine, manufactured in the Czech Republic, is designed for sanding solid wood and wood-based materials. This machine is ideal for carpentry workshops, suitable for processing the edges of furniture components, moldings, fronts, and other wooden products. The table with adjustable inclination allows for sanding at an angle, and the additional workstation on the opposite side of the belt increases the machine's capabilities. TECHNICAL DATA: – Manufacturer: HOUFEK, – Model: HB 1000, – Country of manufacture: Czech Republic, – Year of manufacture: 2006, – Serial number: 590, – Power: 3 kW, – Power supply: 400 V, three-phase, – Frequency: 50 Hz, – Rated current: 6.6 A, – Machine weight: 480 kg. CATALOGUE PARAMETERS OF THE MODEL: – Sanding belt width: 200 mm, – Sanding belt length: 3200 mm, – Dimensions of the work table: 1000 × 400 mm, – Table inclination range: 0–45°. The above catalogue dimensions require confirmation by measurement for the offered unit. EQUIPMENT: – Work table with adjustable inclination, – Additional table on the opposite side of the belt, – Guide with adjustable angle and scale, – Manual adjustment knobs, – Guards for the sanding unit, – Connections for connecting a dust extraction system, – Emergency stop switch. We issue a VAT invoice. Transportation can be arranged for an additional fee. You are welcome to test the machine. Where can you see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 Podpoz S Ed Uofx Ab Tegu 23-310 MODLIBORZYCE

Year of construction: 2021, operating hours: 2,608 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 06421, COMANDULLI EDILPLUS 8+6 DX model Belt running direction: RIGHT to LEFT, year of manufacture 2021, #06421 • Annual maintenance last performed on 10/08/26 – only 2,608 operating hours • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 2 pneumatic lower and 2 upper chamfer supports (height-adjustable) • Belt infeed: Calibration/profile support, both axes motorized • Pneumatic finishing/stock support • Belt outfeed: Water nozzle support, both axes motorized • Automatic centralized lubrication system Psdpfx Aboz Rk Hfs Tjgu • Table extension console, double-row • Space requirement approx.: 630 x 180 cm, infeed and outfeed area: 300 x 60 cm Optional services available, such as: freight, installation and training Pricing • EXW from the machine location, plus VAT, subject to prior sale, no tools included, attachments and accessories in the pictures are not included in the machine/scope of delivery Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty • Machine sold as is, with no warranty of any kind Inspection possibility • at the operating site near Bitburg Availability • after delivery of the new machine, approximately February 2027

Year of construction: 2020, condition: like new (used), functionality: fully functional, machine/vehicle number: MACC2020027, We are offering this Montresor Lola 6.4, manufactured in 2020. This machine is in very good condition and is fully operational. The robot shown in the images is not included with the machine. Specifications: * 6 grinding heads * 4 edge breakers * 1 milling unit * 1 sawing unit for automatic water seals * continuous feed with automatic conveyor belt Condition: The machine has always been well-maintained and is in excellent working order. Pgedpfx Aezvvxxob Teu Ready for immediate use without any additional investment. Testing is possible by appointment. The machine is available immediately.

Condition: used, Year of construction: 2024, Bavelloni VE350-8 Straight-Line Vertical Edging Machine. Serial No. 110000297 (2024). Country of Origin: Italy Pgjdpfx Abe Afxi Ao Tju Please Note: Highest bid is subject to vendor approval Location: This lot is located in Burton-on-Trent, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2013, functionality: fully functional, operating hours: 334 h, power: 17.5 kW (23.79 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, total height: 1,600 mm, total length: 6,600 mm, total width: 1,250 mm, overall weight: 2,900 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We are offering this used OTT TORNADO-TOP edge banding machine, manufactured in 2013, for sale. The machine is in very good condition and was rarely used. It was only used to process PUR adhesive for custom-made products and individual pieces of furniture. No series production was carried out. Pgjdpjzvqclefx Ab Teu The reason for the sale is the closure of the business! Type: TORNADO-TOP Year of manufacture: 2013 Power supply: 3~ N+PE Frequency: 50 Hz Rated voltage: 3×400 VAC Rated current: 31 A Rated power: 17.5 kW cos φ: Control voltage: 24 VDC Maximum fuse rating: 35 A Conductor cross-section: 5×6 mm² If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2013, Ashton Industrial model AIS-3350/XDIA D Refurb Edge Detection Unit/Arriser. Serial no: 8343 (2013) Location: These lots are located in Wellingborough, Northamptonshire, UK Pgeds Afwwgepfx Ab Tju

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, pressure: 6 bar, 6-disc glass grinding and polishing machine. In excellent working condition! 6 discs Glass thickness: 3 - 35 mm Minimum glass size: 40x40 mm Speed: 0.5 - 5 m/min. Power: 16.5 kW Power supply: 400V The machine is in excellent technical condition and can be viewed, tested, and purchased by prior arrangement. Pgjdpfx Aezzrrxjb Teu

Condition: good (used), Year of construction: 2013, machine/vehicle number: 0-201-24-0260, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance Z-axis: 600 mm, workpiece length (max.): 3,470 mm, workpiece width (max.): 1,550 mm, number of slots in tool magazine: 18, controller manufacturer: HOMATIC, controller model: PC85, spindle motor power: 15,000 W, Equipment: CE marking, documentation/manual, Machine with shuttle console tables Workpiece length X max. (all units) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece length max. (milling cutter D=25 mm) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Pjdpfxj Afabaj Ab Tjgu Workpiece width Y max. (all units) - max. 1300 mm Workpiece width Y max. (milling cutter D=25 mm) - max. 1550 mm 2 individually movable console clamping tables - 4-position workpiece placement possible - 8 movable consoles (4 per table) each with 1 front stop - Console length 1490 mm - 4 lifting rails - Side stops 4 x left, 4 x right (mirror image) - 1 vacuum circuit per table - 2 vacuum pumps, 140 m3/h each - Chip conveyor belt Equipment / Units: - Milling spindle 15 kW, liquid cooling - Tool changer, 18-position carousel - C-axis with electrical interface - C-axis extension for FLEX-5 unit - Drilling unit 2.7 kW, 20 spindles vertical / 10 spindles horizontal - Swiveling sawing/drilling unit - Sawing unit D=1200 - FLEX5 sawing, milling, drilling unit for multi-tool - 16 pcs. suction cups 160x115 mm - 8 pcs. suction cups 125x75 mm Control / Software: - PC85 control system - WoodWop 5.1 - Wood Design Package - CAD plugin - DXF import - Schuler MDE Available from week 46/2026.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 138/1-703 15509125, functionality: fully functional, input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, edge thickness (max.): 15 mm, height adjustment type: electric, actuation type: electric, total height: 2,230 mm, total length: 8,755 mm, total width: 2,416 mm, overall weight: 4,200 kg, Edge banding machine (for laminated boards): Year of manufacture: 2017 Type: LUMINA 1586 PREMIUM Serial number: 138/1-703 15509125 Control system: HOL-HER EDGECONTROL TOUCH PPC 319 Gluing technology used: EVA glue granules GlueJet (exchangeable station), L-Tronic laser (exchangeable station) Units: pre-milling cutters, gluing station, pressure unit, trimming saw (two motors, with pneumatic angle adjustment), milling units (for straight and radius edges), rounding units (2 motors, digitally adjustable), sanding units (profiled and flat), indexing unit (NC axes), polishing unit Workpiece thickness: 8 mm – 60 mm Minimum workpiece width: 150 mm Maximum edge banding thickness: 15 mm Maximum edge banding thickness in roll form: 3 mm Maximum edge banding height: 64 mm Machine length: 8.755 m Width with retracted roller support: 1830 mm Width with extended roller support: 2416 mm Minimum height: 1814 mm Maximum height: 2230 mm Workpiece inlet height: 877 mm Machine weight: 4200 kg Minimum electrical connection power: AC 400 V 50 Hz + N … 18A Compressed air, working pressure: 6 bar Compressed air, maximum pressure: 8 bar Chip extraction, connections: 2x Fi 120 mm, 2x Fi 140 mm Pgodpfx Aoz I R Snjb Tju Zero joint: infrared Electrical height adjustment: YES Top belt pressure: YES Maximum feed rate: 25 m/min Feed rate adjustment, stepless: YES Heating zone: YES Spray nozzles: YES Machine documentation: YES Complies with all relevant provisions of the following EC directives: Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2014/30/EU

Condition: used, total height: 2,200 mm, total length: 5,350 mm, total width: 1,200 mm, Year of manufacture: 2018 Colour: White Weight: 3.500 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - Serial number: 1000022855 - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers Pjdpfx Aozw El Rob Tegu - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - - Tools available: Yes - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 3 - Edge band height [mm]: 64 - Min. panel thickness [mm]: 10 - Max. panel thickness [mm]: 60 - Min. panel width [mm]: 85 - Max. panel width [mm]: 3200 - Min. panel length [mm]: 140 - Max. panel length [mm]: 3200 - Min. feed speed [m/min]: 12 - Max. feed speed [m/min]: 18 - Feed speed control: Variable - Left or right-sided: Yes - Max. spindle speed [rpm]: 12000 - Voltage [V]: 400 - Current consumption [A]: 20 - Fuse [A]: 32 - Power [kW]: 11.0 - Transport dimensions: 5350mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine BRANDT Optimat KDF 440 C, year 2015: Configuration: Entry fence servomotorical adjustable Premilling manual adjustable Edge banding EVA glue / Airtec System Schugoma Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers pneumatic adjustable Polishing brushes Cleaning fluid spraying front and back. Control panel Working thickness adjustment servo driven Material height 8-60mm Pgsdpfx Aewun Irob Tsu Edge thickness 0,4-8mm Feeding speed 11m/min. Total length including feeding plate 5573mm Total weight 1860kg Only 592.198 Meters edgebanded. Very good condition, fully working! Including full documentation and CE. Available immediately.

Year of construction: 2025, operating hours: 140 h, condition: like new (used), functionality: fully functional, machine/vehicle number: X-1500, Equipment: CE marking, Only 12 months old – like new , only 140 working hours. Immediate availability. Full documentation + CE. Can be demonstrated producing corners. Unique capability: up to 130×130 mm. Perfect condition – ready for production. Manufacturer: SIA Model: Edge Protector 130x130, Slitter 1500x1500, SCC Base 7 Year of Manufacture: 2025 Working Hours: 140 hours Technical Condition: Like new State: In production Edge Protector Specifications: - Size: Minimum 35x35mm, Maximum 130x130mm - Wall Thickness: Minimum 1.5mm, Maximum 8mm (10mm optional, depending on paper thickness) - Maximum Reels: 12 + 1 craft - Speed: 50m/min (60m/min optional, available on data regulation) Pgsdpfx Abjz I S Ido Tou - Glue heating - 7,5kw. Slitter Rewinder Specifications: - Reel Size: Maximum 1500x1500mm, Minimum Width 500mm - Minimum Cutting Width: 35mm - Number of Knives: 15 - Speed: Maximum 250m/min - Electrical Power: 11kW SCC Air Compressor Specifications: - Base: SCC Base 7 VSD TD - Electrical Power: 7.5kW - Air Volume: 0.92m³/min - Tank Volume: 500 liters Dimensions: EDGE PROTECTOR ; SLITTER : Length: 26000 mm; 3000MM - Width: 3000 mm ; 2300MM - Height: 2500 mm ; 1300MM - Weight: 6000 kg ; 3500KG Keywords: corner production line, cardboard corner machine, edge protector machine, packaging corner line, cardboard profile machine, V profile machine, 130×130 mm corner, automatic corner cutting, high‑speed corner line, packaging machinery, cardboard converting machine, protective corner production, industrial packaging equipment.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, grinding belt length: 3,000 mm, grinding belt width: 150 mm, table height adjustment: 180 mm, input frequency: 50 Hz, Langzauner LZK 3/4 oscillating edge sanding machine, with veneer edge sanding attachment and feed console Sanding unit adjustable from 0-45° Oscillation Miter stop Height-adjustable sanding table (180 mm) for utilizing the full width of the sanding belt Table size (front) 1000 x 350 mm Table size (side) 400 x 250 mm Connection power 4.6 kW Belt length 3000 mm Belt width 150 mm Pgjdpjz D Autofx Ab Tou Belt speed 22 m/s Weight approx. 350 kg Space requirement 1770 x 730 mm Year of manufacture 1997 Condition: Functionality tested

Condition: used, Year of construction: 1979, Press length: 3000 mm Press depth: Vertical pressing elements: 6 Horizontal pressing elements: Pressure system: pneumatic Pressing pressure: per cylinder Cylinder stroke: mm Hold-down device: no Machine length: 2700 mm Machine width: 1000 mm Machine height: 1400 mm Pgsdjy A Hkhspfx Ab Tju Weight:

Condition: used, Year of construction: 2009, 0,4-6 mm Pgedezy Sfcepfx Ab Tju Workingpiece thickness from to 6-60 mm Total length 3516 mm Feed speed 10 m/min. Weight 850 kg

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Condition: Functionally tested Equipment: Pgsdozu T Sgjpfx Ab Tou Base machine Extendable boom Joint milling unit 1801 Edge feed system, fully automatic 1903 Glujet 201 adhesive application system, cartridge Printing unit 1912-3, pneumatic Cutting unit 1918 Combination milling unit FR201 Pulling blade unit 1929 Chip collection box Surface pulling blade 1964 Location: Flörsheim Availability: Short-term

Condition: used, functionality: fully functional, Year of construction: 2003, machine/vehicle number: 745003, control type: CNC control, actuation type: hydraulic, controller manufacturer: DELEM, controller model: DA 65, bending force (max.): 110 t, table height: 800 mm, oil tank capacity: 200 l, overall weight: 13,000 kg, total length: 4,500 mm, total width: 2,000 mm, total height: 3,000 mm, input voltage: 380 V, input current: 11 A, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, foot remote control, F.lli Farina 3-axis, 4100-ton press, 110-ton capacity. Year of manufacture: 2003. Delem 65 control system. The machine is still in perfect working order and is for sale due to limited use. Pgodpj Afwybjfx Ab Tju

Condition: used, Year of construction: 2012, Feed speed: 18-25m/min, with FK11 max. 20m/min, working height: approx. 950mm, max. workpiece thickness: 60mm, edge banding material rolls: approx. 0.3-3mm, edge banding material strips: approx. 0.4-6mm, max. roll diameter: 830mm, machine length: approx. 7845mm, operating hours: 25724h, feed operating hours: 3371h, machining time: 412h, control system: HOMAG powerControl PC22. Annual production: between 15000 and 22000 linear meters per year. Equipment: Top/bottom release agent spraying unit, joint trimming unit, glue application unit, 2-roll edge banding magazine, pressure zone, end trimming unit HL81, pre-milling unit BF10, profile trimming unit FK11, profile scraper PN10, finishing unit with glue joint scraper and buffing unit, preparation for HOMAG laserTec, powerControl PC22 with touchscreen, automation packages. In addition, scrapers for both 2mm and 1mm edges are available. Equipment: Extensive range of processing units including joint trimming, glue application unit, 2-roll edge banding magazine, end trimming, pre-milling and profile trimming units, profile and glue joint scrapers, buffing unit and spraying systems. HOMAG powerControl PC22 with touchscreen, automation packages and preparation for laserTec. Scrapers for 1mm and 2mm edges available. Special feature: PUR retrofit in 2023 with GP Service EasyPUR AC-34 and RIEPE spraying system LP289/99 (24V retrofit). The machine is in good, well-maintained condition, fully functional, in operation and has been serviced annually by HOMAG. Documentation available. Inspection possible by arrangement. Pjde Aba Rtopfx Ab Togu

Condition: excellent (used), Year of construction: 2016, power: 12.3 kW (16.72 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used Hebrock AKV 3005 DK-F edge banding machine, manufactured in 2016. Voltage: 400 V Frequency: 50 Hz Current: 31.7 A Power: 12.3 kW Machine number: 3141 Year of manufacture: 2016 PLC control with touchscreen The asking price is 20,500 euros net (negotiable). Pjdpfx Aoz Afctsb Tegu If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2000, Used Machine Year of manufacture: 2000 Podpozw N Euofx Ab Tegu Features and Technical Specifications: - For vertical edge processing with edge thicknesses up to 3 mm - With automatic milling feed - With base frame - Electrical connection: 230 V - Compressed air connection: min. 6 bar - Workpiece thickness: max. 45 mm - Tool: r = 2.5 or r = 3

Condition: excellent (used), Year of construction: 2022, With the RFM 320 model, BARTH offers a sanding machine that enables the quick and efficient creation of chamfers up to 16 mm wide in a single pass, while ensuring the highest sanding quality. Short setup times ensure that even individual pieces can be manufactured in a time-saving manner. The RFM 320 features a sanding belt oscillation system with pneumatic belt cleaning. Standard equipment for the RFM 320: Adjustable sanding tool for 8 radii (2, 3, 4, 5, 6, 8, 10, and 12.5 mm) Chamfer sanding device up to 16 mm wide Sanding belt oscillation with pneumatic belt cleaning Integrated base for feed unit 16A socket for feed Dust extraction port Ø 80 mm Chassis with 2 steerable, lockable wheels Workpiece support, 380 mm extended width Pre-milling unit 1,100 W / 220 V Continuously variable speed up to 25,000 rpm Milling range up to a radius of 12.5 mm CE Installation dimensions L x W x H in mm: 1,600 x 690 x 1,010 Weight: 207 kg Includes many NEW sanding belts Note regarding used machines: • Subject to errors in technical specifications and prior sale. Pgsdpjz Uhgdjfx Ab Tsu • The stated prices are ex-works prices, collection only – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address and telephone number!)

Condition: excellent (used), Pre-cutter, adhesive unit for cartridges, guillotine, crosscut saw (front and rear), straight-line cutter, angle cutter, rounding scraper, corner scraper, cut-off saw, polishing machine, year of manufacture 2002. Pedpfozik R Aox Ab Tsgu