Used Air separators for sale (13)

Condition: used, Year of construction: 2015, Operating hours: 2,240 h, Functionality: fully functional, Total width: 4,005 mm, Total length: 9,847 mm, Total height: 2,500 mm, Overall weight: 6,025 kg, Belt width: 3,000 mm, Fuel: electricity, Frequency: 50 Hz, Type of input current: three-phase, Input voltage: 400 V, Protection type (IP code): IP55, Transport height: 2,500 mm, Transport length: 10,000 mm, Transport width: 4,100 mm, Drive type: Elektrisch, Equipment: Documentation/Manual, Lighting, Westeria air separator type AirStar 3000 for the separation of heavy and light materials. Typical applications in the recycling/waste management industry, for example for separating heavy impurities from a material mix, for producing alternative fuel or for separating materials of different specific weights (e.g. hard plastics and films). Throughput capacity: 300-350 m³/h depending on material properties Working width: 3,000 mm Dpnkfl Color: RAL 3020 C3M / RAL 7040 Included - Extended light material chamber L3 - Drum scraper cleaning screw - Cleaning floor - Speed monitoring incl. all options - DiscSpreader for optimum material distribution in the separator process

Condition: used, Year of construction: 2007, Operating hours: 6,704 h, Fuel: diesel, Year of manufacture: 2007 Colour: Green Field of application: Construction Drive: Wheel Empty weight: 6.500 kg CE mark: yes Komptech Hurrikan. Year: 2007. Hours: 6704. Dpk0Wh Max weight: 6500 kg. 6 Tons ADR axle. 1 x mech. outrigger. Without Generator! Cleaning of Compost. Remove plastic away from Compost! ID NR: 263. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, Used Westeria Air Track 1 Windsifter Year 2015 John Deere Powerunit These rugged, energy-efficient machines separate heavy and light materials using a three-part process: 1. Acceleration Belt – input material enters the machine on a conveyor belt where it is spread out into a single layer. When inside the machine the conveyor belt accelerates the material to the discharge edge. 2. Air Jet – An air jet with an adjustable nozzle, located below and slightly behind the discharge belt produces an air stream that takes light materials upwards and forwards from the discharge edge to a rotational drum. The rotating drum carries the light material over the top and in to a holding chamber or are extracted via conveyor Dpdsdn 3. Heavies Discharge Conveyor – Any heavy materials, too dense for the air stream to carry to the rotating separation drum simply fall straight down from the discharge edge and are extracted from the windsifter via a discharge conveyor

Condition: new, Year of construction: 2024, TUKWIND Pro 18 mounted windsifter, fan Pxvslm (for self-assembly) The wind sifter high-performance suction and pressure station, with 18 KW motor power, for attachment to existing screens. For fine, medium and/or oversize fractions. TUKWIND combination station incl. control cabinet and frequency converter, suction and pressure hose NW 315/400 mm, suction hood and blow-out nozzle separates light materials/plastics from compost, soil and building rubble. - Compact separation system for attachment to existing screens - High suction power, adjustable via built-in frequency converter - Lowest operating costs

Condition: excellent (used), Year of construction: 1995, Machine/vehicle number: 47070001, For separating and separating light and impurities Drum diameter x width: 1,400 x 1,200 mm Vibrating feeder Lbmyavsgoz Blower with V = 7,000 m³/h incl. steel construction, platform, railings, etc.

Condition: good (used), Year of construction: 2020, Operating hours: 1,500 h, Functionality: fully functional, Frequency: 50 Hz, Doppstadt Westeria Airflex 1500 windsifter & CAT DE 110 E3 generator set Working width 1,500 mm Enclosure with maintenance doors and viewing window Height-adjustable elevation (up to 800 mm) Airflow separator drum: diameter 800 mm, 1.5 kW Material feed belt: width = 1,500 mm, 4kW Fan power: 30 kW Manual control, incl. cabling Air circulation 125A CEE plug for power connection Dnksyr Equipment: Spreader disks "DiscSpreader" Ø 800 mm, 2x 2.2kW, enclosed loose Heavy-duty cross conveyor: 3 kW, width = 650 mm Heavy-duty stockpile conveyor: center distance = 3,480 mm, width = 800 mm, 2.2 kW can be folded to the side Light material discharge conveyor with long light material hood: width = 1,550mm, 3kW Hydraulic level control: 1.5kW for height adjustment, SLS extraction unit, folding of the stockpile belt AirLift incl. conveying fan, 15kW, exhaust air capacity = 12,000 m³ CAT *mobile* power generator Type: DE 110 E3 Year of construction: 2019 Operating hours: approx. 1,750 Power: 100 KVA ; 80 KW Rated voltage: 400V ; 230V Frequency: 50 Hz Weight: 1.750 KG Mobile Windshifter on hook lift frame including CAT Powergenerator AirFlex 1500 Working width: 1,500 mm Enclosure with maintenance doors and viewing window Height-adjustable elevation (up to 800 mm) Airflow separator drum: Diameter 800 mm, 1.5 kW Material feed belt: width = 1,500 mm, 4kW Fan power: 30 kW Manual control, incl. cabling Air recirculation mode 125A CEE-plug The machine is in a technically good and ready-to-use condition. Many components such as bearings and feed table have been reinforced! The machine is sold in the condition it was in at the time of delivery. The seller assumes no liability for defects. This is not a binding offer. Subject to prior sale and technical changes. All information without guarantee. Spreader discs Ø 800 mm, 2x 2.2kW, enclosed loose Heavy-duty cross conveyor: 3 kW, width = 650 mm Heavy-duty stockpile conveyor: Center distance = 3,480 mm, width = 800 mm, 2.2 kW can be folded to the side Lightweight material discharge conveyor with long lightweight material bonnet: width = 1,550 mm, 3 kW Hydraulic level control: 1.5kW for height adjustment, SLS extraction unit, folding/unfolding of the stockpile belt AirLift incl. conveying fan, 15kW, exhaust air capacity = 12,000 m³/hour Power generator CAT *mobile* Type: DE 110 E3 Year of construction: 09/2019 Working hours: 1.750 Power: 100 KVA ; 80 KW Rated voltage: 400V/230V Frequency: 50 Hz Weight: 1.750 KG The machine is in a technically good and ready-to-use condition. Many components, such as the bearings and feed table, have been reinforced! The machine will be sold in the condition existing at the time of delivery. The seller does not assume any liability for defects. This is not a binding offer. Subject to prior sale and technical modifications. All information without guarantee. The machine is in a technically good and ready-to-use condition. Many components, such as the bearings and feed table, have been reinforced! The machine will be sold in the condition existing at the time of delivery. The seller does not assume any liability for defects. This is not a binding offer. Subject to prior sale and technical modifications. All information without guarantee.

Year of construction: 2016, Condition: as good as new (ex-display), - Westeria Doppstadt WS 1600 AB air classifier - incl. feed conveyor with disc distributors, discharge conveyor and stockpile conveyor for the heavy fraction - semi-mobile version - detailed technical description is attached - Demo machine with less than 200 hours, year of construction 2016. Bfinonhihqq

Condition: ready for operation (used), SMB Combisifter 10/32 + 32/60 2 fractions separates wood, plastic, foil and paper, wind sifting with filter system, 2 vibrating chutes, airlock, control cabinet with complete control system, mobile with hook trolley, self-erecting, compressor for filter cleaning, 1000 operating hours. Btqo3Stj

Condition: reconditioned (used), Year of construction: 1998, The redom SE200 used separation table is fully operational, can be seen and is available on site in Poland. Mx7Hls In 2019, the machine underwent a thorough renovation. The Redom separation table works on 3 basic principles, eccentric speed, airflow and the angle of inclination of the table. From the market-leading Redoma company, now part of Eldan's recycling machine company, the SE200 has a throughput of up to 2000 kg/p/h. Suitable for all types of dry electric granulated, the SE200 table used produces 99.5% pure copper product. Simple to set up and use, the Redom SE200 has an eccentric 3 kW power unit and an 11 kW blower motor. Redoma SE200 Dimensions: Length: 2.7m Width: 1.8m Height: 2.2m Weight: 1,700Kg

Condition: new, Year of construction: 2024, Attachable wind sifter TUKWIND Basic 15, fan (for self-assembly) Ckbhnyltwl The high-performance air separator with 15 KW motor power for attachment to existing screening machines. For fine, medium and/or oversize fractions, TUKWIND suction station incl. control panel with frequency converter, suction hood, pipes and hose as required. Separates light materials/plastics from compost, soil and construction waste. - Compact separation system for attachment to existing screens - High suction power, adjustable thanks to built-in frequency converter - Lowest operating costs

Year of construction: 2019, Condition: excellent (used), Manufacturer : Westeria Type : AirStar – 3000-L3-DS2 Design capacity approx. : 170 - 190 m³/h 25.000 kg/h 30% moisture content Working width : 3.000 mm Electric system : 480 V / 60 Hz Dimensions : 6900 x 4000 x 2300 mm Weight : 7000 kg Date of manufacture : 2019 Operated until : 2023 Transportvolumen: ca. 3 x 40ft HC Raw material specification (design): Material: dust / flakes / fiber, contaminated with minerals Bulk density: 150 – 180 kg/m³ b.d. Sizes: 0 – 4.0 mm, single particles of bigger sizes Moisture content: approx. 30 % in average Function Separation of minerals from flakes and dust with the target to protect machinery in the material flow from damage and reduction of wear. Machinery list Air Star Wind sifter Make: Westeria Type: WS 2.1-3000 Vspz99Ng Including: • Disc spreader Type DS2 D = 800/3000 • Accelerator belt • Separation drum • Fan • Chute Type A • Chute Type C • Separation chamber Type L3 • Available spare parts

Condition: used, Functionality: fully functional, Amano PiA-30U Dust collector Good working condition. Please check out our other listings as well. Blurshe8Qct

Year of construction: 1997, Condition: good (used), Hazemag impact air classifier ready for use with vibrating chute fan and control cabinet. Ivpj7Fv