Used Grease Separator for sale (7,352)

Year of construction: 2023, condition: used, Wolf bucket separator TSP.124 is designed for tough continuous operation on construction sites, storage yards, or landfills. The bearings are maintenance-free, and the chain casings contain fluid grease, which is distributed to all areas by the movement of the bucket and the running chain, ensuring constant lubrication. Therefore, the Terra-Star never needs to be relubricated and is maintenance-free. The machine is equipped with M80X mixing shafts, and the tools are hardfaced with armored wire in the wear zones. An OQ70/55 adapter is installed, although other adapters can also be mounted. Combined use with excavators and wheel loaders is possible without difficulty. The adapter is not included in the price. Rsdpeyf Aqnjfx Anlsch For excavators from 18 t For wheel loaders from 10 t Weight in kg: 1850 Throughput: 52 - 77 m³ / h Leak oil connection required: 1 Series: TSP.124.096

Year of construction: 2013, condition: refurbished (used), functionality: fully functional, This is an SCC 102 combination steamer in an electric version, from the premium manufacturer Rational, manufactured in 2013, including the base frame. A matching Rational UltraVent exhaust hood can be purchased separately, upon request. The combination steamer does not have hanging racks; instead, it has a trolley with trays. A suitable transport trolley can also be purchased to facilitate loading, if desired. The unit has been fully refurbished in our in-house workshop, and the combination steamer is fully functional. These are example images. Original photos will follow shortly. The unit is available from approximately week 46. Rcjdpfx As Agu Hysnlsh The list price is €18,170 net. You will receive an invoice with VAT shown. Service: We will be happy to assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational equipment type? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs • High-quality branded equipment at fair prices • Professional overhaul/inspection & expert cleaning • Checked & fully functional - or your money back • Flexible shipping or self-collection options • Competent advice - before and after purchase • Provision of operating instructions, connection diagrams & spare parts • Inspection according to DGUV V3 Technical data: • W x D x H: approx. 1069 x 976 x 1042 mm • Power connection: V: 400 / kW: 36.7 / Hz: 50/60 • Capacity: 10 x 1/1 GN or 20 x 1/1 GN • Weight: approx. 185 kg • Serial number: E12SH13112376801 • Year of manufacture: 2013 Condition: used, refurbished, fully functional Further details: • In combination steamer mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C) • Care Control - self-cleaning function • Core temperature probe • Handheld spray with automatic retraction • 8.5-inch color display and touchscreen • 5 fan speeds programmable • Integrated, maintenance-free grease separation system • Automatic start time setting • 7 cleaning levels for unattended cleaning - also overnight • Mist can be adjusted in 3 levels - from 30°C to 260°C • 5 programmable fermentation levels • USB interface • Seamless, tub-shaped hygienic cooking chamber, rounded corners • Halogen cooking chamber lighting Shipping: • Delivery or self-collection upon agreement • Worldwide shipping on request • Shipping to islands or mountain stations only upon agreement Subject to change and errors. Do you have any questions, would you like to receive advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Year of construction: 2011, condition: used, functionality: fully functional, This is a combination oven/steamer, model CMP 101, from the premium manufacturer Rational, in an electric version. The unit has been completely refurbished in our in-house workshop and is fully functional. The unit is offered with a 6-month warranty on all electrical parts. The base shown in the picture is not included in the offer but can be purchased as an option. The list price is: €9,380 net. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational appliance type? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types. This unit is the optimal choice if you are looking for a classic combination oven/steamer that you want to operate manually. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality brand-name equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, air flow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 1042 mm Minimum door opening dimensions for transport WxH: 845x1050mm Power connection: 400 V / kW: 18.6 / 50-60 Hz Capacity: 10 x 1/1 GN Weight: approx. 132 kg Serial number: E11MH11122284737 Year of manufacture: 2011 Condition: used, refurbished, fully functional Further information: Possible applications: Steam mode: from 30° C to 130° C Convection mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: brings pre-prepared and cooled dishes to the ideal serving temperature in the optimal climate Automatic separation of grease for clean cooking chamber air Manual cleaning program 5 air speeds: Whether gentle or robust, the CombiMaster® Plus has the right air speed for every type of food Ventilated double-glazed door (swivels for easier cleaning) LED cooking chamber lighting Core temperature measurement by means of a sensor Rsdpfxszu Rulj Anlech Cool-down function High-performance fresh steam generator (automatic flushing and emptying) Handheld spray gun with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday to Friday 9:00 a.m. - 1:00 p.m. and 2:00 p.m. - 5:00 p.m. The sale is made exclusively subject to our general terms and conditions (GTC).

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 1670 242, Equipment: CE marking, documentation/manual, Fully functional Westfalia separator, all documents, tooling and cover hoist crane included. Last operational 12.2024. Rsdpfx Anjw Icgbolsch

Condition: used, functionality: fully functional, machine/vehicle number: 1674938, We offer this used GEA Westfalia Separator CA 220-010 two-phase decanter, year of manufacture approx. 1985. Type: CA 220-010 Machine number: 1674938 Year of manufacture: approx. 1985 Bowl design: cylindroconical with screw conveyor for solid/liquid separation Bowl diameter: 220 mm L/D ratio: 2.65 Screw drive: Cyclo gearbox Connection voltage: 3 phase 400 VAC Connected load: 15 kW Rcedpfxjyrdlas Anloh If you have any questions or require further information, please send us a message or call us.

Year of construction: 2015, condition: refurbished (used), functionality: fully functional, This is a combination steamer, model SCC 201 WE Electric, from the premium manufacturer Rational. The unit has been fully overhauled in our in-house workshop and is in perfect working order. You will receive an invoice with VAT shown. The recommended retail price is €21,940.00 net / €26,108.60 gross. Our price: €8,399.15 net / €9,995 gross. Service: We will be happy to assist you in arranging a certified Rational service technician throughout Germany. Are you looking for a specific Rational appliance type? Please ask us, as we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded appliances at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, wiring diagrams and spare parts. Inspection according to DGUV V3. This combination steamer offers space for 20 x 1/1 GN containers. In automatic mode, the appliance independently recognizes the ideal cooking process, size of the food, quantity and product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods and finishing). Technical data: W x D x H: approx. 879 x 791 x 1782 mm Minimum door opening dimensions for transport WxH: 925x1900mm Power connection: V: 400 / kW: 37.0 / Hz: 50/60 Weight: approx. 268 kg Rodpsz Hv H Ijfx Anljch Serial number: E21SH15052459806 Year of manufacture: 2015 Capacity: 20 x 1/1 GN or 40 x 1/2 GN Lengthwise insertion: 1/1, 1/2, 2/3, 1/3, 2/8 GN Meals per day: 150-300 Condition: Used, fully overhauled, fully functional. Additional information: In combination steamer mode, 3 operating modes are available: steam (30°C to 130 °C), hot air (30°C to 300°C) and combination (30°C to 300°C). Care Control - self-cleaning system Core temperature probe Hand spray with automatic retraction 8.5 inch color display and touchscreen 5 fan speeds programmable Integrated, maintenance-free grease separation system Automatic start time setting 7 cleaning levels for unattended cleaning - even overnight Humidification adjustable in 3 stages - from 30°C to 260 °C 5 programmable proofing levels USB interface Seamless, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like a consultation, or would you like to see something on site? You can reach us by phone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. Sales are made exclusively according to our general terms and conditions.

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Rodpopu A D Asfx Anloch Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: used, Year of construction: 2018, Screening shafts with square discs, separation distance 40 mm Coarse screening - grain size 0 - 45/50 mm Wheel loader attachment for Volvo L50-120 included in the price Wheel loader from 15 t Cutting width 2600 mm / 3 shafts Capacity 2.60 m³ Throughput / hour 80 - 140 m³/hour Working pressure 280 - 300 bar Oil requirement 200 - 280 l/min The separator crushes clods of earth and separates stones, roots, and branches from still usable soil. Rcedpszv Rg Rsfx Anloh Other shafts can also be installed in the separator at any time, thanks to the patented Wolf shaft couplings; conversion time approx. 40 to 60 minutes. The separator is equipped with an overflow protection to increase the bucket capacity and protect against flying stones. The TSP.263 - the bearings are maintenance-free; the chains should be sprayed with spray grease via the maintenance flaps every 20 operating hours. Dimensions and weight without adapter.

Condition: used, Year of construction: 2019, Mixing rotor M80X – particle size 0 – mm Adapter Oilquick OQ70/55 not included in the price – available upon request Excavators from 16 t / wheel loaders from 9 t Cutting width 1200 mm / 3 rotors Capacity 1.30 m³ Throughput / hour 44 - 60 m³/hour Working pressure 280 - 300 bar Oil requirement 150 - 200 l/min - Mixing in lime or binding agents to dry the soil, mixing with compost, sand, other soils, etc., while simultaneously crushing soil clods. - Aerating, crushing, tearing, and turning biomass, organic waste, and compost while simultaneously separating branches, roots, etc., that cannot be crushed. - Crushing of easily brittle rocks in construction debris such as pumice, bricks, and porous concrete blocks, while simultaneously separating smaller pieces in mm, and larger and harder parts remain in the separator. - Feeding clumpy soil onto a screening system reduces waste and increases throughput. The TSP.123 - the bearings are maintenance-free, and the chains should be sprayed with spray grease every 20 operating hours via the maintenance flaps. Dimensions and weight without adapter. Rcsdezw I Izepfx Anloh

Condition: used, Year of construction: 2025, Screening drums with star discs, separation distance 15 mm Medium screening – grain size 0-20/25 mm Star discs in wear zones with hardfacing using armored wire Adapter OQ70/55 – not included in the price – available upon request Excavators from 24 t / wheel loaders from 13 t Cutting width 1500 mm / 4 drums Capacity 1.85 m³ Throughput / hour 64 - 95 m³/hour Working pressure 280 - 300 bar Oil requirement 150 - 200 l/min - Separating stones, branches, roots, turf, debris, etc. from still usable waste soil, for example, for topsoil in landscaping. - The mixing of compost, sand, substrate, etc. with the soil during the screening process is easily possible. Rjdpfjzv Rfajx Anlech - Screening out coarse stones from excavated soil - Screening out stones from mixed soil after demolition. - Feeding clumpy soil onto a screening system reduces waste and increases throughput. The TSP.154 – the bearings are maintenance-free, and the chain housings contain grease that ensures lubrication at every point through the movement of the screen and the rotation of the chain. Therefore, the Terra-Star TSP.154 does not need to be re-greased and is maintenance-free. Dimensions and weight without adapter.

Condition: used, Year of construction: 2025, Mixing rotor M80X - grain size 0 - mm Mixing paddles armored in wear zones Adapter Oilquick OQ70/55 and combined wheel loader mount for Volvo L50-120 - not included in the price – available upon request Excavators from 24 t / wheel loaders from 13 t Cutting width 1500 mm / 4 rotors Capacity 1.85 m³ Rcodpfx Anszv Rgdolsh Throughput / hour 64 - 95 m³/hour Working pressure 280 - 300 bar Oil requirement 150 - 200 l/min - Mixing in lime or mixing binders to dry the soil, mixing with compost, sand, other soils, etc. while simultaneously crushing soil clods. - Aerating, crushing, tearing, and turning of biomass, organic waste, and compost while simultaneously separating branches, roots, etc., that cannot be crushed. - Crushing of easily brittle rocks in construction debris such as pumice, bricks, and porous concrete, while simultaneously separating the chunks and larger, hard parts in the separator. - Feeding clumped soil onto a screening system reduces waste and increases throughput. The TSP.154 - the bearings are maintenance-free, and the chain boxes contain grease that ensures lubrication at every point through the movement of the bucket and the running of the chain. Therefore, the Terra-Star TSP.154 does not need to be re-greased and is maintenance-free. Dimensions and weight without adapter

Condition: used, Year of construction: 2025, Mixing rotor M80X - grain size 0 - mm Mixing blocks in the wear zones with armored wire welded on without adapter – available upon request Excavators from 14 t / wheel loaders from 10 t Cutting width 1500 mm / 4 rotors Capacity 1.25 m³ Throughput / hour 44 - 65 m³/hour Working pressure 200 - 260 bar Oil flow rate 150 - 180 l/min - Mixing in lime or binding agents to dry the soil, mixing with compost, sand, other soils, etc. while simultaneously crushing soil clods. - Aerating, crushing, tearing, and turning biomass, biowaste, and compost while simultaneously separating branches, roots, etc., that cannot be crushed. - Crushing easily brittle rocks in construction debris, such as pumice, bricks, and porous concrete blocks, while simultaneously separating the fragments. - Feeding clumped soil onto a screening system reduces waste and increases throughput. The TSC.154 - the bearings are maintenance-free, and the chain housings contain grease that, through the movement of the blade and the running of the chain, ensures lubrication at every point. Therefore, the Terra-Star TSC.154 does not need to be greased and is maintenance-free. Dimensions and weight without adapter. Rcsdszv Rfyepfx Anlsh

Condition: used, Year of construction: 2025, Mixing rotor M80X - grit size 0 - mm Mixing blocks in the wear zones are reinforced Adapter Likufix SW48 - not included in the price – available upon request Excavators from 24 t / wheel loaders from 13 t Cutting width 1500 mm / 4 rotors Capacity 1.85 m³ Rodpfxezv N A Rj Anljch Throughput / hour 64 - 95 m³/hour Working pressure 280 - 300 bar Oil flow rate 150 - 200 l/min - Mixing in lime or binding agents to dry the soil, mixing with compost, sand, other soils, etc., while simultaneously breaking up soil clumps. - Aerating, shredding, tearing, and turning biomass, biowaste, and compost while simultaneously separating branches, roots, etc., that cannot be shredded. - Shredding easily brittle rocks in construction debris such as pumice, bricks, and porous concrete, while simultaneously separating the fragments. - Feeding clumped soil onto a screening system reduces waste and increases throughput. The TSP.154 – the bearings are maintenance-free, and the chain housings contain a lubricating grease that, through the movement of the blade and the running of the chain, ensures lubrication at every point. Therefore, the Terra-Star TSP.154 does not need to be re-greased and is maintenance-free. Dimensions and weight without adapter.

Condition: used, Year of construction: 2025, Block cutter BS252 - grit size 0 - 35/40 mm Blocks in the wear zones are welded with armor wire Adapter Oilquick OQ70/55 - not included in the price - available upon request Excavators from 26 t / wheel loaders from 14 t Cutting width 1500 mm / 5 shafts Capacity 2.25 m³ Throughput / hour 80 - 122 m³/hour Working pressure 280 - 300 bar Oil flow 150 - 200 l/min - Mixing in lime or binding agents to dry the soil, mixing with compost, sand, other soils, etc., while simultaneously crushing soil clumps. - Aerating, crushing, tearing, and turning biomass, biowaste, and compost while simultaneously separating branches, roots, etc., that cannot be crushed. - Crushing of easily brittle rocks in construction debris such as pumice, bricks, and porous concrete blocks, while simultaneously separating the fragments in mm; larger and harder parts remain in the separator. - Feeding clumped soil onto a screening system reduces waste and increases throughput. The TSP.155 - the bearings are maintenance-free, and the chain housings contain a lubricating grease that, through the movement of the bucket and the running of the chain, provides lubrication at every point. Therefore, the Terra-Star TSP.155 does not need to be re-greased and is maintenance-free. Dimensions and weight without adapter. Redoz Eg Imjpfx Anloch

Condition: used, Year of construction: 2026, Mixing rotors with block discs BS252 Fine screening - grain size 0 - 35/40 mm Blocks in the wear zones with armored wire welded on Rcedpfx Ajz S E Sljnloh Adapter Likufix SW48 - not included in the price – available upon request Excavators from 24 t / wheel loaders from 13 t Cutting width 1500 mm / 4 rotors Capacity 1.85 m³ Throughput / hour 64 - 95 m³/hour Working pressure 280 - 300 bar Oil flow 150 - 200 l/min - Mixing in lime or mixing agents for drying the soil, mixing with compost, sand, other soils, etc. while simultaneously crushing soil clods. - Aerating, crushing, shredding, and turning biomass, organic waste, and compost while simultaneously separating branches, roots, etc. that cannot be crushed. - Crushing of easily brittle rocks in construction debris such as pumice, bricks, and porous concrete, while simultaneously separating fragments of mm, larger and harder parts remain in the separator. - Feeding clumped soil onto a screening system reduces waste and increases throughput. The TSP.154 - the bearings are maintenance-free, and the chain housings contain grease that, due to the movement of the bucket and the running of the chain, ensures lubrication at every point. Therefore, the Terra-Star TSP.154 does not need to be re-lubricated and is maintenance-free. Dimensions and weight without adapter.

Condition: used, Year of construction: 2026, Block cutter BS254 - grit size 0 - 30/35 mm Blocks in the wear zones are welded with armor wire. Currently, an OQ70/55 adapter is installed – not included in the price – available upon request. For excavators from 18 tons / wheel loaders from 10 tons. Cutting width 1200 mm / 4 shafts Capacity 1.50 m³ Throughput / hour 52 - 77 m³/hour Working pressure 280 - 300 bar Oil requirement 150 - 200 l/min - Mixing in lime or binding agents to dry the soil, mixing with compost, sand, other soils, etc., while simultaneously crushing soil clods. - Aerating, shredding, tearing, and turning biomass, biowaste, and compost while simultaneously separating branches, roots, etc., which cannot be crushed. - Crushing of easily brittle rocks in construction debris such as pumice, bricks, and porous concrete blocks, while simultaneously separating smaller pieces in mm, larger and harder parts remain in the separator. Rcsdpszv N E Sofx Anleh - Feeding clumped soil onto a screening system reduces waste and increases throughput. The TSP.124 – the bearings are maintenance-free, and the chain housings contain grease that, due to the movement of the blade and the running of the chain, ensures lubrication at every point. Therefore, the Terra-Star TSP.124 does not need to be re-greased and is maintenance-free. Dimensions and weight without adapter.

Condition: excellent (used), functionality: fully functional, Westfalia Separator AG CIP System Westfalia Separator AG CIP System | Tank, Pump, Heat Exchanger System type: CIP (Cleaning In Place) Manufacturer: Westfalia Separatoren AG / GEA Group A complete CIP (Cleaning In Place) installation from the renowned manufacturer Westfalia Separator AG, designed for automatic cleaning and disinfection of process lines in the food and dairy industries. The system is equipped with stainless steel tanks with heating jackets, recirculation pumps, a GEA Ecoflex plate heat exchanger, and a control cabinet. Main components of the system: 1. Stainless steel CIP tanks Brand: Westfalia Separator AG Type: CIP-TANK 3000 L (2 pcs) Serial numbers: 96/00408-1 and 96/00408-2 Year of manufacture: 1996 Capacity: (2×) 3300 liters Operating pressure: 0 bar Operating temperature: 80 °C Dimensions: (2×) 3000 × 1900 × 2300 mm 2. Stainless steel platform with stairs Dimensions: 2950 × 2200 × 2400 mm 3. Stairs Dimensions: 600 × 600 × 500 mm 4. Centrifugal pump Brand: Hilge Type: EURO-HYGIA-B-SUPER-II/60 B Number: 23/96/11349 Capacity: 30 m³/h Power: 11.0 kW Dimensions: 750 × 350 × 450 mm 5. Flow meter Brand: Endress + Hauser Model: Promag 53 Dimensions: 350 × 200 × 200 mm Accurate flow measurement for CIP media. 6. Anema centrifugal pump Dimensions: 530 × 300 × 300 mm 7. Plate heat exchanger Brand: GEA Ecoflex GmbH Rcedpfxsxtvb Ue Anleh Type: VT20 CDS Serial number: 170/13832 Dimensions: 900 × 550 × 1500 mm High efficiency heat transfer for CIP solution preparation. 8. Control cabinet Dimensions: 670 × 220 × 800 mm Responsible for controlling and monitoring CIP system operation. 9. Stainless steel buffer tank (CIP tank) Tank dimensions: Ø 800 × 800 mm Overall dimensions: 1150 × 900 × 1770 mm 10. Anema centrifugal pump, number: 32078 Operating pressure: 12 bar Dimensions: 650 × 400 × 450 mm The Westfalia Separator AG CIP system is a comprehensive solution for cleaning process installations, providing: - high process hygiene, - monitoring of cleaning parameters (temperature, flow, time), - integration capability with dairy, food, or beverage production lines. The use of components from GEA, Hilge, Endress + Hauser, and Anema ensures reliability and long service life of the system.

Condition: used, Year of construction: 2026, Mixing auger M80X - grit size 0 - mm Mixing blocks in wear zones with armored wire welded on Adapter OQ70/55 - not included in the price – available upon request Excavators from 14 t / wheel loaders from 10 t Cutting width 1500 mm / 4 augers Capacity 1.25 m³ Throughput / hour 44 - 65 m³/hour Working pressure 200 - 260 bar Oil flow 150 - 180 l/min - Incorporating lime or mixing binders to dry the soil, mixing with compost, sand, other soils, etc., while simultaneously crushing soil clumps. - Aerating, crushing, tearing, and turning biomass, organic waste, and compost, while simultaneously separating branches, roots, etc., that cannot be crushed. - Crushing easily brittle rocks in construction debris, such as pumice, bricks, and porous concrete blocks, while simultaneously separating the fragments (mm), with larger and harder parts remaining in the separator. Rodpfezv N Exsx Anlsch - Feeding clumpy soil onto a screening system reduces waste and increases throughput. The TSC.154 - the bearings are maintenance-free, and the chain housings contain grease that ensures lubrication at every point through the movement of the blade and the rotation of the chain. Therefore, the Terra-Star TSC.154 does not need to be re-greased and is maintenance-free. Dimensions and weight without adapter

Condition: used, Year of construction: 2026, Mixing rotor M80X - grain size 0 - mm Mixing paddles armored in the wear zones Adapter OQ80 - not included in the price - available upon request Excavators from 24 tons / wheel loaders from 13 tons Cutting width 1500 mm / 4 rotors Capacity 1.85 m³ Throughput / hour 64 - 95 m³/hour Working pressure 280 - 300 bar Oil requirement 150 - 200 l/min - Mixing in lime or binding agents to dry the soil, mixing with compost, sand, other soils, etc., while simultaneously crushing soil clods. - Aerating, crushing, tearing, and turning biomass, bio-waste, and compost while simultaneously separating branches, roots, etc., that cannot be crushed. Rcodszv N Awjpfx Anljh - Crushing of easily brittle rocks in construction debris such as pumice, bricks, and porous concrete blocks, while simultaneously separating the fragments. - Feeding clumped soil onto a screening system reduces waste and increases throughput. The TSP.154 - the bearings are maintenance-free, and the chain cases contain grease that provides lubrication at every point through the movement of the blade and the running of the chain. Therefore, the Terra-Star TSP.154 does not need to be re-greased and is maintenance-free. Dimensions and weight without adapter

Condition: used, Year of construction: 2002, machine/vehicle number: 6243, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,500 mm, Equipment: documentation/manual, Base machine / travel ranges: X-axis machine stand 5,000 mm, Y-axis spindle head slide 2,100 mm, Z-axis spindle head 1,500 mm. Machine stand: Compact, torsion-resistant welded construction with hardened flat guide rails and telescopic steel covers to protect against chips and coolant. Spindle head slide: Cast iron design with hydraulic weight compensation, guided by combined roller/plain bearing guides. Machine bed: Flat bed design with approximately 1,200 mm guide rail width and roller compact guides for high precision. Automatic universal milling head: CNC-swiveling milling head arbor 340 x 1°, Hirth gearing approximately 125 kN; milling head 180 x 1°, approximately 100 kN; milling spindle with hydromechanical tool quick-change system, clamping force approximately 25 kN; tool holder SK 50, DIN 69871. Main drive: 37 kW at 100% ED, 53 kW at 40% ED; externally ventilated AC motor, 2-stage gearbox with automatic changeover; speed 22–4,000 1/min. Feed drives: Digital AC individual drives; X/Y: 2–12,000 mm/min, Z: 2–15,000 mm/min. Control system / measuring systems: Central operation via Heidenhain TNC 430 M. Direct, non-contact linear measuring systems. Optional: Heidenhain iTNC 530. Electrical system: EN 60204 / VBG 4, 400/230 V ±10%, 3 phases, 50 Hz, 24 V control voltage; connected load approximately 80 kVA. Control cabinet IP54, main motor IP55. Lubrication: Main gearbox / milling head drive oil circulation lubrication; main spindle grease long-life lubrication; guides / ball screws pulse central lubrication. Coolant: Internal / external coolant supply with paper band filter. Max. 50 l/min at 10 bar or 47 l/min at 16 bar; tank 500 l. Coolant / air changeover. Oil cooler for temperature stabilization and increased manufacturing accuracy. Leveling system: Electromechanical, via 2 vertical ball screws with separate drives, measuring systems, and CNC axes. Working platform: Moves in the X direction, with CNC control panel; electrically secured door with viewing window. Rodpfx Anoz Dvycslsch Pick-up station: 10 tools; max. tool weight 25 kg, length 400 mm, Ø 125 mm, with free adjacent slots Ø 250 mm. Clamping plate: 3,500 x 3,000 mm; T-slots 22 H12 DIN 650, spacing 250 mm; clamping surface accuracy class 1 DIN 876. CNC rotary table: Clamping surface 1,250 x 1,600 mm / Ø 1,800 mm; Hirth division 360 x 1°; 6 longitudinal slots 22 H12, 2 positioning slots 22 H7; T-slot spacing 160 mm; centering bushing Ø100 H7 x 20 mm; max. 5 1/min; tilting moment 85,000 Nm; tangential moment 120,000 Nm; table load max. 11,500 kg. Additional equipment: Oriented spindle holder 360 x 1°; hinged band chip conveyor for X=5,000 mm, feed width approximately 350 mm, discharge height approximately 1,250 mm; 3D touch probe; electronic handwheel HR 410 for 3 axes; pendulum machining for 2 work areas with monitored safety areas; manually adjustable splash guard. Collision monitoring: Brankamp CMS with piezoelectric strain gauge; if the process limit is exceeded, the axes are braked and the machine is switched off. Painting: Machine / control cabinet RAL 7035, milling head / spindle head RAL 5021; DD structured paint, semi-gloss, oil and alkali resistant. Power connection: 400 V, 3 phases, 50 Hz, 80 kVA, 160 A slow-blow; compressed air 4–6 bar, connection G 1/4. CE-relevant environmental protection to be provided on-site; adapter plates for chip / coolant return are not included. Coordinate information: Y 730.0124. Documentation: Operating manual SHW-UF6L and Heidenhain TNC

Condition: excellent (used), Year of construction: 1972, total power requirement 22 kW weight of the machine ca. 8 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DISKUS Double Disc Surface Grinding Machine in C-form with rotary workpiece feeding system and automatic dressing cycle model DDS 600 RAM year 1972 / 2002 modernized Serial no 6967 _____ Grinding wheels Ø, each 600 mm Grinding wheels bore x height, approx. 75 / 150 mm Grinding wheel speeds Upper wheel 95 – 955 rpm (3-30 m/s) Lower wheel 765 rpm (24 m/s) Grinding spindle drive, each 30 kW Workpiece dimensions: Grinding width (or workpiece diameter) approx. 20 - 120 mm Grinding (workpiece) height max 50 mm Rjdsxqrbxopfx Anlsch Hydraulic infeed impulse 0.0025 – 0.05 mm Total feed way 150 mm External Ø of workpiece carrier disk 810 mm Feeds of rotary workpiece feed system, infinitely variable 25 – 241 mm/s Total electrical load, approx. 50 kW - 380 V - 50 Hz Weight, approx. 8,000 kg Accessories / Special Features: • In 2002 updated IONIC gauge control Model 17A with monitor and direct input of workpiece data including tolerance range, workpiece counting, statistics. The workpieces are continuously measured via two opposite tracer heads, automatically triggering an hydraulic infeed when needed. • Rotary workpiece feed system with Workpiece carrier wheel (Ø 800 mm) and infinitely variable speed adjustment. • Workpiece height check to avoid crashing with griding wheels • Automatic hydraulic dressing device between the two grinding wheels for simultaneous dressing of both wheels. Dressing cycle can be preset (no. of workpieces/time). Hydraulic return of upper grinding slide to original position/workpiece/thickness (saves a lot of time). • ELBARON Oilmist Extractor with stand and adjustable suction cone • Walkable steel podium for easy machine operating and monitoring • Grinding wheel exchanging device, various spare grinding wheels • Central lubrication using grease and oil mist * Separate switch cabinet. * Separate hydraulic unit. • Currently no coolant filtration device available (can may be supplied separately). This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Bearing rings, Piston rings, washers, hydraulic parts, and other pressed parts.) Condition : very good ! Very well maintained ! Please click here to soon view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: new, Year of construction: 2025, The XTON Smart Cleaner SC1000™ automatic basket washer is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in various industrial and automotive applications. This washer is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned element. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA, which, combined with the appropriate temperature and pressure, easily removes all types of dirt. The machine operates in a closed-loop system at temperatures up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-liter tank, which can be optionally thermally insulated to protect the heated fluid from cooling too quickly. The Smart Cleaner SC1000™ ensures high cleaning quality, time and energy savings, as well as safe and convenient operation. It is designed for automatically removing dirt from cast iron, aluminum, and steel surfaces. The design and construction of the Smart Cleaner SC1000™ adhere to the highest quality standards ISO 9001 and environmental standards ISO 14001. EQUIPMENT: - Rotating basket with a diameter of 100 cm - Heated tank with a capacity of 300 liters - Dual liquid filtration system - Liquid level and temperature sensors - Oil separator - Adjustable feet with a height adjustment range of 100 mm - XTON Active Cleaner BA (5L starter pack) TECHNICAL PARAMETERS: - Weight: 200 kg - External dimensions - Open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions - Closed chamber (W x D x H): 150 x 120 x 140 cm - Rotating basket diameter: 100 cm - Rotating basket load capacity: 300 kg - Work time programming range: 0 - 99 min - Washing/liquid temperature: up to 80°C - Heater power: 9 kW - Tank capacity: 300 L - Tank capacity to oil separator level: 200 L Rjdpfx Anou R Urhjloch - Pump capacity: 250 L/min - Spray pressure: 4.5 - 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 - Declaration of conformity: CE

Condition: new, Year of construction: 2026, TYTAN CENTER 750 Vario Lathe-Mill Combo 230V | Turning: 250 × 750 mm | Milling: 16 mm | Variable Spindle Speed The TYTAN CENTER 750 Vario is a versatile combination machine that merges a lathe and a milling machine into one compact unit—saving space and increasing functionality. It features independent spindle motors for both turning and milling, each with variable speed control. Ideal for small workshops, industrial repair shops, and home garages, it enables a wide range of machining operations without the need to switch machines. Key Features Two-in-one design – combines turning and milling in one compact, space-saving machine Independent spindle motors with variable speed – allows separate operation of lathe and mill functions LCD displays – precise spindle speed monitoring and adjustments for both units Rodpfx Answ H Rdmeljch Two spindle speed ranges – adaptable to various materials and machining tasks Complex part machining – reduces repositioning between machines Rigid dovetail guideways – provide high stability during milling operations Technical Specifications LATHE Feature Value Chuck size 125 mm (3-jaw) Max. turning diameter over bed 250 mm Max. turning diameter over cross slide 150 mm Distance between centers 750 mm Bed width 135 mm Spindle bore 29 mm Spindle taper MT4 Spindle speed control Stepless (2 ranges) Spindle speed ranges 50–1125 / 100–2250 RPM Metric threads 18 types (0.2–3.5 mm/rev) Imperial threads 21 types (8–56 TPI) Longitudinal feed rates 6 speeds (0.07–0.4 mm/rev) Tool post size 65 × 65 × 20 mm Max. tool size 12 × 12 mm Compound slide travel 70 mm Cross slide travel 130 mm Longitudinal slide travel 630 mm Tailstock quill diameter 30 mm Tailstock quill travel 70 mm Tailstock taper MT2 Motor power (S1/S6) 0.75 / 0.9 kW / 230 V MILLING HEAD Feature Value Max. drilling capacity 16 mm Spindle taper MT2 Spindle quill travel 50 mm Head tilt range –90° to +90° Spindle-to-column distance 170 mm Spindle-to-table distance 43 – 250 mm Spindle speed range 50 – 2250 RPM T-slots (number × width) 2 × 8 mm Motor power 0.6 kW / 230 V GENERAL Feature Value Machine dimensions (L × W × H) 1350 × 580 × 1630 mm Weight 230 kg Standard Equipment 125 mm 3-jaw chuck with reversible jaws Machine base Fixed centers MT2 and MT4 Drill chuck arbor and holder (MT2/B16) Change gears set Wrenches, grease gun, maintenance tools CE-compliant safety guards

Condition: used, Year of construction: 2023, Vemag Separator -Model: 813 -Power: 0.16 kW Rcods Agrfuepfx Anlsh -Weight: 29 kg -Year of manufacture: 2023 This separation device effectively separates bones, cartilage, tendons, etc. from products. Suitable for all types of raw materials: meat, fish, and vegetables.

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, rotational speed (max.): 3,520 rpm, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, Used, very good condition Westfalia SA7-01-576 Separator, year of construction 1977. Packed in wooden crate to IPPC standard, ready to be shipped. - Brand new Time control box with Burkert valves and automatic controls - Performance 500 - 3.000 Ltr - self-cleaning - Motor 4 kw, 380V / 50 Hz - Start-switch including phase changer and emergency stop function Rcjdpjzryq Rsfx Anljh - with Tools, Instruction Manual and Spare part list - Made in Germany If you have any questions or need more information, feel free to send us a message or give us a call.