Used Grease for sale (544)

Condition: new, Harmonic 4B grease no. 2 is perfectly suited for exceptionally long service life and operation within a wide temperature range from -10°C to +70°C. For robots, gearboxes. Top-quality lubricating grease. Nwsdpfx Agjxluyyszsr

Condition: ready for operation (used), Vogel SKF piston pump KFG10-5W2-S1-486 grease/NLG12, max. 90-264 VAC 47-440Hz, 120-370 VDC, serial number: filled! - used, in good condition, 100% functional, delivery as per photos. Nwjdpfox Evbhex Agzjr

Condition: used, Weinig / Wagner one-handed hydraulic grease gun with manometer for hydraulic clamps. Nwsdjxu H Tdepfx Agzor Manufacturer Part No.: 00309102

Condition: used, Part of Grease nippleapprox. 1,5t available Nsdpfxeglmt Ej Agzowr

Condition: used, Pneumatic grease gun, compressed air grease gun, grease pump Nsdpfx Agji Agxqjzowr -Grease gun: pneumatic, compressed air grease gun, mobile version -Container capacity: approx. 100 liters / Ø 462 x 625 mm -Total dimensions: Ø 606 x H1020 mm -Weight: 63 kg

Year of construction: 2022, condition: new, SEMI-AUTOMATIC GREASEPROOF FERMENTER FOR 60 BERLINER/ DOUGHNUTS with GARBAGE RACK Completely made of stainless steel Semi-automatic turning device with miter cabinet and 10 tilting trays on rollers lateral drain for the grease Connection 16 Ah Power/voltage 10,4 Kw 400 v/ 50 Hz Dimensions 1243x1075x820 total length 2315 cm with side drain plate weight 220 kg Hourly output 600 doughnuts per hour Nwsdsd R T Uxspfx Agzjr Grease capacity 67 liters for further questions please call thank you

Condition: used, functionality: fully functional, Grease bag cleaner for sale. Nwedpfx Agsxby Dcjzer

Year of construction: 1989, condition: used, Technical details: Pressure max.: 30 MPa volume flow rate: 70 cbm/min. electrics - voltage/frequency: 380 / 3Ph ~ V/Hz tank capacity: 50 dm³ l machine weight approx.: 120 kg connected load: 0,62 kW dimensions L x W x H: 0,7 x Ø 600 x 1,3 m Application: Pressing grease into grease nipples Nwjdpfx Ageu Nft Hjzsr Size of grease reservoir: 460 x 620mm Size of the press Ø 345 x 540mm Connection via bayonet mount Handling/operation with hand gun and 3.8 metre hose with ON/OFF switch The grease gun is mobile, equipped with handrail with two-hand grip and 220 V socket. *

Condition: good (used), functionality: fully functional, machine/vehicle number: 5109 SP, This advanced degreasing system is engineered to deliver efficient and thorough cleaning of metal components. Metal baskets, manually loaded with parts, are guided through heated degreasing baths to ensure consistent and effective results. The installation operates with Cyclohexane (liquid, supplied by BASF) as the degreasing medium, guaranteeing both reliability and high-quality performance. Key features include: Nwedpfxsxawkko Agzer - Precise Temperature Control: Baths are heated to the required operating temperature for optimal degreasing. - Triple Filtration System: Integrated filtration at 0.1 µm, 1 µm, and 10 µm ensures maximum fluid cleanliness and extended bath life. - Robust Design: Built for durability and consistent performance in industrial environments. - Dutch ATEX-Zone Certified: Fully compliant for safe operation in hazardous areas. This installation offers a proven solution for manufacturers seeking safe, efficient, and high-quality degreasing of metal components. The machine is in full working order and ready for immediate use. Available now and can be tested in Boxtel, Netherlands.

Condition: used, Year of construction: 2015, Serial number: CAT0320EANAZ0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20996 Specifications: 2015 model Hours: approx. 8,500 (can increase) Weight: 22,400 kg 112 kW Undercarriage (see photos) Track width: 60 cm Total width: 299 cm Central grease SMP quick coupler Njdpfxowzg Abo Agzjwr R6 Rototilt Grading bucket, 190 cm wide Digging bucket Trimble GPS Rear-view camera Tilt rotator beam Extra lights Radio/CD Climate control/AC Video attached Delivery by agreement Description:Well-maintained 2015 CAT 320 tracked excavator.The machine is in good condition and has 8,500 hours. It is in daily operation, so hours will increase.Sold with GPS, Rototilt, and 2 buckets.Delivery by agreement. Own weight: 22400 Model: 320EL Beltegraver m/ GPS, Rototilt og 2 skuffer.

Condition: used, Year of construction: 1999, 1999 | ROBUSTE KAISER S3302V Steel Trailer | Used Tipper Semi-trailer 📍Location: France, Mours-Saint-Eusèbe 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 6500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 14 inspection points 10 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The trailer seems okay, the two wheels were off, but they will be of course mounted for transport. The condition looks fine, with just the back tail with some holes, but no direct impact for the use, stabilizers and cylinders look well greased. The body is steel. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39984 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Nwsdox N Dgaepfx Agzer 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2024, Exhibition machine Garbsen, new, complete in standard configuration with: - Sturdy, torsion-free steel frame, welded and bolted construction - Upper lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams featuring proven tolerance compensation system (System Ganner) for tightly pressed carcass joints - Counterpressure surfaces (side pressure wall, bottom) are 38 mm thick, coated, continuous support panels - Continuous pressing surface height of 95 mm on the lower vertical press beam - Electromotive adjustment of both press beams via precision trapezoidal spindle screws (with increased pitch and concentricity accuracy) and high-performance recirculating nuts with grease reservoir - Pressing is carried out electromotively, by 2 separate helical geared motors (2 x 0.75 kW) - The pressing force of the press beams is infinitely electronically adjustable using two potentiometers and regulated via frequency converters; the pressing force control is therefore absolutely wear-free - Pressing force for the horizontal press beam: min. 500 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing force for the vertical press beam: min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) Nwsdpfxexy Tl Do Agzor - Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second - Extremely simple operation via 6 separate push buttons, 8 movement processes can be selected via the control system - Freely adjustable pressing time preselection with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: length min: 150 mm, max: 2500 mm; height min: 150 mm, max: 1400 mm; depth: 700 mm - Electrical connection: 400V, 3Ph, 50Hz (3.2 kW, 16 A) - Weight: 2100 kg (net) - Dimensions: 3500x1200x2300 mm (L x W x H) Image includes special accessories: machine feet. Surcharge for rapid traverse speed per unit for fast positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams. Pressing speed: 5 / 10 / 25 mm/sec and rapid traverse speed: 50 mm/sec. Sensors can be deactivated for pressing special components. Set of machine feet for working height 500 mm per unit. Location: Garbsen

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00555, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iB/210F manufactured in 2012.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/210F Model Number: A05B-1329-B205 Year of Manufacture Robot: 2012.12 Warranty term (months): 12   Payload (kg): 210 Reach (mm): 2655 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1240   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.12 RCC Length (m): 14   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10   Nwodpox Ithwjfx Agzjr

Condition: used, mileage: 699,883 km, power: 338 kW (459.55 HP), first registration: 01/2004, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro3, total width: 2,550 mm, total height: 3,650 mm, loading space volume: 13 m³, Equipment: ABS, MÜLLER-FATMASTER suction structure for sludge etc. for the disposal of residues from grease separators, capacity 13,000 liters, swiveling suction hose reel, "WEBASTO" heating, "WITTING" suction pressure air pump type RFW 150, flow rate: 1180 m³/h, power: 37 KW, "SPECK" high pressure pump type: P 45/85-120, power 110/70 bar/ltr/min, "VOGELSANG" rotary piston pump type: V 100-450, max. power: 20 m³/h, "REXROTH" oil pump type: A10VO100, max. power: 160/117.5 bar/ltr/min, equipped with a macerator for solid material shredding, control cabinet, auxiliary drive, ABS, differential lock rear, engine brake, starting aid, Cruise control, driver comfort suspension seat, heated and electrically adjustable exterior mirrors, roof hatch, fog lights, 2 x rotating beacons, 2nd and 4th steerable axle(s), lift axle, air suspension with lifting and lowering device rear axle, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. Nwjdpfx Agjvnndbozer We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net Njdpfed E R D Sjx Agzjwr - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: used, Year of construction: 2021, operating hours: 177 h, Please contact ATS Norway for more information Please provide reference number upon request: 19184 Specifications: - Hours: 177 - 90 km - 8-wheel drive? - Good tires - Automatic box - With front screen - Lots of extra light - Radio/Cd - Climate/ac - Diesel - With belts Worl Power Er-180 000L-8 crane 180 t/m from 2016   Superstructure: Nwsdpfx Ajvg At Iegzsr - Supportlegs - Extra light - Quick attach - Reversing camera - Central grease Hours: 177

Condition: used, Year of construction: 2011, · Working area: 2,550 x 1,067 mm · X-Y travel: 2,980 x 1,450 mm · Z-axis travel length: 150 mm · Clearance height: 120 mm Drilling Unit F14: · Drilling head with 8 + 6 spindles · 5 individually selectable vertical spindles in X · 3 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm (6,000 rpm available as an option) · Power: 2.2 kW · Grid: 32 mm · Drill holder: M10 with 11 mm positive fit · Pneumatic feed stroke: 60 mm Grooving saw unit in "X": · Integrated in the drilling head · Grooving saw blade with a maximum diameter of 120 mm Main milling unit: · Tool interface HSK 63F · Speed: 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power: 6.6 kW (9 HP) from 12,000 rpm (S1) · Motor power: 7.5 kW (10 HP) from 12,000 rpm (S6) · Right-/left-hand rotation · Ceramic bearings · Prepared for use with angle drives Tool changer TR10: Automatic lateral tool changer for 10 tools. · Number of tool positions: 10 · Maximum tool diameter: 120 mm · Maximum weight per tool: 4.5 kg · Maximum total tool weight: 28 kg A central extraction port collects all processing units into a single connection with D=200 mm. This reduces the required extraction capacity to approx. 3,200 m³/h. TVF worktable: The worktable is designed to provide the operator with maximum "freedom of movement." The vacuum quick-clamping system offers maximum flexibility for precise positioning and optimal holding of workpieces. · 4 TVF supports, L=1100 mm, infinitely adjustable in X · 12 TVF vacuum cups 120 x 120 mm, infinitely adjustable in Y · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (total 4 pcs.) · Retractable reference stops controlled via CNC Automatic central lubrication: The correct amount of lubricating grease is distributed via an electronic CNC control unit (X, Y, Z axes) Vacuum system (base machine): · Vacuum pump: 90 m³/h · Power: 2.2 kW · Max. negative pressure (at pump): 0.9 bar PROGRAMMING SYSTEM XILOG PLUS Software features: - Import of DXF files Nwodpfx Agexy Ndiszer - Import of ASCII files - User interface in operator’s native language Safety devices with bumpers Machine technical data: · Total connected load max.: 18 kW · Recommended fuse: 64 A · Power supply: 400 V 50-60 Hz · Compressed air: 6-7 bar · System pressure (recommended): 8 bar · Compressed air consumption: 200 Nl/min · Central extraction port Ø: 200 mm · Extraction speed: 30 m/sec · Air consumption (central extraction): 3,200 m³/h · Negative pressure: 3,000 Pascal · Weight: approx. 2,500 kg Remote control of machine functions 6 TVF supports L=1,100 mm and 18 vacuum cups 120x120 mm Cross lasers for vacuum cup positioning Two cross lasers mounted on the unit carrier allow for easy positioning of the vacuum cups. Location: Nattheim

Condition: refurbished (used), Year of construction: 2018, machine/vehicle number: R-00553, load capacity: 210 kg, arm reach: 2,450 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/210WE manufactured in 2018.07. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: R-2000iC/210WE Model Number: A05B-1338-B201 Year of Manufacture Robot: 2018.07 Warranty term (months): 12   Nwsdpfxex Ib Tzj Agzor Payload (kg): 210 Reach (mm): 2450 Repeatability (mm): ± 0.1 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1180   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2018.07 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: used, Year of construction: 2015, operating hours: 6,049 h, machine/vehicle number: 01xxxx, Please contact ATS Norway for more information Please provide reference number upon request: 19585 Specifications: - 2015 model - 6049 Hours - 21218 km - 264 HP - Automatic transmission - Weight: 16600 kg - Width: 255 cm - 194 kW - 6x6 - Permitted total weight: 36000 kg - Bar - Tires (see pictures) - Central grease - Bunkering pump - Articulated steering - Commuting on Axles - Heated mirrors - Radio - Light Nwjdpfx Aevyfclogzsr - Air conditioning/ac - Ready for delivery Description: Great Hydrema dump truck with white signs. The dump truck has been well looked after by its owner and it shows. All oils and filters have recently been changed by approved personnel. The dump truck is ready for delivery. HK: 264 Hours: 6049 Own weight: 16600 Total Weight: 36000 Width: 255 Length: 913 Model: 922D Dumper m / hvite skilt

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Nwsdpfx Aevvi Iqjgzer

Condition: used, Year of construction: 2014, operating hours: 11,000 h, Serial number: KMTPC240J55K6xxxx Please contact ATS Norway for more information Please provide reference number upon request: 17924 Specifications: 2014 model Hours: Approximately 11,000 Weight: 25,500 kg Power: 141 kW Chassis (see pictures) Gjerstad S70 attachment Engcon tiltrotator Nodpfx Asvg Nr Degzjwr SMP sanding bucket Central grease Belt width: Approx. 60 cm Width of the machine: Approx. 320 cm Cracks in the windshield (see photos) Rear view camera Extra light Rotor lamp Radio/CD Air conditioning/AC Previously under service agreement Description:Komatsu PC240, 2014 model, sold with Engcon rototilt and SMP sanding bucket.The machine has a service agreement and has been regularly serviced throughout its life. The turbo has recently been replaced. The GPS unit is not included.Last service was performed at 10,500 hours.Delivery can be done quickly. Hours: 11000 Own weight: 25500 Total Weight: 25500 Width: 320 Kw: 141 Model: PC240LC-10

Condition: used, Year of construction: 2021, Exhibition unit (little used) Lubrication: Grease Max. output speed n2: 4,000 rpm Gear ratio (n1:n2): 1:0.8 Weight: approx. 8 kg Machine connection: HSK F63 Tool holder Usable width: 24 Nsdovvi Iwopfx Agzewr Storage location: Garbsen

Condition: used, Year of construction: 2018, operating hours: 20,300 h, Serial number: VCEL180HC0000xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21755 Specifications: 2018 model Hours: approx. 20,300 Weight: 29,700 kg 245 kW Central grease Tires (see pictures) Bucket included, but not the one currently mounted Rearview camera Nedpjxvligofx Agzewr Width: approx. 330 cm Certification expired 10/25 Joystick steering Radio/CD AC not working Services done by owner and Volvo Ready for delivery Description:Volvo L180H wheel loader.Sold with a bucket, but not the one currently mounted.Services performed by owner and Volvo.Ready for delivery. Hours: 20300 Own weight: 29700 Year controlled: no Year controlled until: 10.25 Width: 330 Kw: 245 Model: 2018 Volvo L180H Hjullaster m/ Skuffe.

Condition: used, Year of construction: 2009, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 20894 Specifications: Year: 2009 Weight (without coupler): 3,532 kg Chisel diameter: Ø170 mm Remaining chisel length (exposed): 66 cm Impact rate: 200–350 BPM Operating pressure: 160–180 bar Oil flow: 210–290 l/min Quick coupler: KM3 (optional removal for price reduction) Autogrease system Hydraulic hoses in good condition, length: 350 cm Description:Giant GT200 hydraulic breaker from 2009, equipped with KM3 quick coupler.Recommended carrier size: 40–50 tons (according to owner).Quick coupler can be excluded for reduced price.Ready for delivery. Nwsdpfx Aswwqffogzer Own weight: 3532 Model: 2009 GIANT GT200 pigghammer m/ KM3 feste.

Condition: used, Year of construction: 2013, operating hours: 8,935 h, machine/vehicle number: 4084xxxx, Please contact ATS Norway for more information Please provide reference number upon request: 16505 - Is certified or delivered certified - 10.000 hours - 112,400 km - Good tires Nwjdpfsvg Nq Hsx Agzjr - 6-wheel drive - Good box - Central grease - Webasto - Reversing camera - Extra light - 360 kW motor - Radio/cd - 2 seats - Delivery by agreement Dump trucks have a history that the owner can confirm is in his possession. Low hours and seems to be well taken care of Can be delivered by agreement Hours: 8935