Used Fan for sale (3,715)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, volume flow: 10,550 m³/h, overall weight: 360 kg, inlet: 350 mm, extraction nozzle diameter: 350 mm, 2 pieces blue Nestro FAN Elmot motor 11KW, Inlet: 350mm, 10.550m3/h. 1 pieces gray Remb Fan Siemens motor 11Kw, Inlet: 300mm, circa.: 10.000m3/h All the fans can be tested; they are in excellent technical condition. Crjdpfx Aj Aa It Hektsi The price is per item!

Condition: excellent (used), Year of construction: 2019, Fan Systems WITT A-RNZ9/560/710/2 Centrifugal fan Crjdpez E Nqqefx Aktji 2019, unused, mounted on frame with 45KW motor, see plates for full spec

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Crjdpfxjua Eu Ne Aktei Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h

Condition: used, functionality: fully functional, Cooling fans for extruder Cjdpfx Ako Af Ip Istjri Manufacturer: Karl Kein Ventilatorenbau Condition: used and tested different models TOTAL PRICE: EUR 500,00

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 25787, rotational speed (max.): 1,500 rpm, inlet: 400 mm, input voltage: 380 V, extraction nozzle diameter: 400 mm, input frequency: 50 Hz, input current: 12 A, Description For sale is a robust industrial extraction fan / chip extraction fan from a stationary extraction system of a wood processing production facility. The fan was in regular use until recently. Before the sale, a test run was carried out: the fan starts reliably and runs smoothly, considering its age. The start-up was documented in a video; the video can be sent to serious potential buyers upon request. The existing control cabinet of the extraction system, including the fan control, is also included in the scope of delivery. The control cabinet is complete. Due to the labeling, it can be seen that the control originally controlled other functions of the filter system in addition to the fan (including vibrator and discharge). Technical data fan / motor Motor manufacturer: Rüetschi & Co. AG, electric motors, CH-5040 Schöftland Motor type: KMER 160 M-4 Motor No.: 25787 Power: 11.0 kW / 15 HP Motor voltage according to nameplate: 380 / 660 V Current according to motor nameplate: 23.0 / 13.0 A Frequency: 50 Hz Speed: 1,500 min-1 Csdpoz Ikxzefx Aktori Protection class: IP44 Insulation class: B Design: stationary industrial radial / extraction fan Control cabinet / control System designation: Extraction system Year of construction control: 06/1995 Rated voltage: 3 x 400 V / 50 Hz Power: 11 kW Rated current: 23 A Fuse: 35 A Control voltage: 230 V Wiring diagram No.: 95-189-1 Existing control cabinet including fan control included in the scope of delivery Condition Used, functional condition with signs of wear and tear due to age and use. The current test run was successful. Inspection and functional demonstration possible by appointment. Video of the test run available upon request. Location / Dismantling Location: 3608 Thun, Switzerland. The fan and the control cabinet are still installed. Dismantling, removal, loading and transport are carried out entirely by the buyer at his own expense and responsibility. Terms of sale Sale from location. Sale in the existing used condition, as inspected. No guarantee or warranty, as far as legally permissible. Technical data provided to the best of our knowledge; errors and prior sale reserved. Inspection on site possible and recommended by appointment. Selling price: 1,000.00 EUR Price net, any statutory taxes and duties apply. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: Ventilator VRZ 1120/63/3 WSN 180, power: 55 kW (74.78 HP), Radial industrial fan with a robust, welded sheet steel construction. Operational volume flow: 9.0017 m³/s; total pressure difference: 2001 Pa; shaft power: 20.8 kW. Low operating hours, as it was used exclusively for testing purposes. Very good condition. Very high brand quality: Zenner fan; consoles, impellers, and housing are fully welded; Küenle motor. Includes a set of vibration dampers, compensators with guide vanes on the pressure and suction sides; color: blue according to RAL 5015. Cedpfx Aezzaz Iekteri

Condition: used, Year of construction: 1999, Used Machine Year of Manufacture: 1990 Features and Technical Specifications - Motor: 11 kW Credpfe Af I Ifex Aktei - 2600 pa - Inlet openings: 350 mm

Condition: used, Radial fan REITZ, Type: MAE Manufacturer's No. 601475, Year of manufacture 2017 Volume flow rate 4260 m³/h = 71 m³/min. Pressure p 1.2 kg/m³ Air inlet Ø 250 mm (flange diameter in the base plate) Air outlet 245 x 195 mm Motor speed 2915 rpm Motor power 7.5 kW Mains connection 400 Volts 50 Hz - Fan impeller with 9 fan blades - Directly flanged drive motor - Flange dimensions for air outlet 310 x 260 mm - Sturdy metal housing made of 5 and 6 mm steel Space requirement L x W x H 1390 x 1030 x 600 mm Weight of radial fan 200 kg Crodpfx Ae Ah Ig Dsktoi Very good condition, only test run completed.

Condition: used, total width: 1,400 mm, total length: 1,600 mm, total height: 2,050 mm, Year of manufacture: 2019 Colour: Grey Empty weight: 1.200 kg - Year: 2019 - CE marking present: Yes - Serial number: W18-2405-01 - Main motor power [kW]: 75 - Rotation speed [rpm]: 3000 - Connection diameter [mm]: 570 - Output diameter [mm]: 67 - Rotor material: Metal - Voltage [V]: 400 - Current consumption [A]: 130 Cedpoz Rz A Dofx Akteri - Fuse [A]: 150 - Power [kW]: 75.0 - Transport dimensions: 1600mm x 1400mm x 2050mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, Used Fan Year of Manufacture: 2007 Features and Technical Specifications - With steel blades - Inlet and outlet diameter: 350 mm - Airflow: 2.41 m³/s - Total pressure rise: 3,602 Pa - Motor: 13.3 kW, 2,900 rpm Crsde Agcngspfx Aktsi - Weight: 241 kg

Condition: like new (used), Year of construction: 2008, volume flow: 3,700 m³/h, power: 2.1 kW (2.86 HP), input frequency: 50 Hz, Systemair KTEX 60-35-4 Atex fan 2.1kw 3700m3 duct mount KTEX fans feature a compact, streamlined design, high-performance forward-curved radial impeller and reliable ATEX-rated AC motors. power 2.1 Kw Voltage 230/ 400V 50Hz 5.8/3.8A IP44 power 2.1 KW Air flow max 3.704 m³/h Csdpfx Asvu Hrksktsri Pressure: 580 Pa Impeller rotation: 1.392 rpm Air flow max 3.704 m³/h Minimum static back pressure 225 Pa Conveyed air temperature max 40 °C Maximum temperature of the conveyed air when speed is controlled 40 °C Insulation class F Explosion-proof designation II 2 G Ex eb h IIB+H₂ T3 Gb Certificate Presafe 17ATEX9970X Ambient and pipe temperature -20 to 40 °C Dimensions and weights inlet (height x width) 350 x 600 mm outlet (height x width) 350 x 600 mm Weight 42 kg

Condition: excellent (used), Year of construction: 2017, Model: ZM450/2 Power: 11 kW Voltage: 400/690 V Crjdpfx Ajz Rn U Tsktji Weight: 144 kg Rotational speed: 2920 1/min

Condition: used, Radial fan KASTRUP Manufacturer's No. 27688/1, Year of manufacture approx. 1985 Volume flow rate approx. 4000 m³/h Intake pipe diameter 250 mm Exhaust outlet 400 x 120 mm Credpfxe Ah Iixj Aktei Motor speed 1440 rpm Motor power 5.5 kW Mains connection 380 volts, 50 Hz - Metal housing Space requirement L x W x H 1100 x 900 x 1220 mm Weight approx. 150 kg Good condition

Condition: like new (used), ebm-papst S3G910-DG02-59 industrial axial fan, 13,445 m³/h, 700 W, Ø900 mm, 380–480 V, in original factory packaging Designed for condensers, air handling units, dry coolers, and heat exchangers. Condition: Never used, in original factory packaging Manufacturer: ebm-papst Model: S3G910-DG02-59 Motor: M3G112-IA Fan type: EC axial fan Number of blades: 5; pressed sheet steel core with injection-molded PP plastic coating Airflow: 13,445 m³/h (ErP reference) Voltage: 380–480 V AC Frequency: 50/60 Hz Current consumption: 1.1 A Power input: 700 W Rotational speed: 640 rpm Cedpfx Ake Ahpv Iotsri Protection rating: IP55 Operating temperature: -25°C to +60°C Bearing type: Ball bearing Static efficiency: 45.2% Efficiency measurement category: A, static Efficiency: N40; N = 52.6 Maximum pressure: max. 80 Pa Country of manufacture: Germany Mounting: 4 support arms with bolt-on mounting tabs

Condition: like new (used), functionality: fully functional, Year of construction: 2022, overall weight: 8 kg, /ct2486/ New ebm-papst S3G450-LA45-63 EC axial fan, 450 mm ⌀, 230 V, 350 W, 6000 m³/h, multiple units available Manufacturer: ebm-papst - Model: S3G450-LA45-63 - Power supply: Single-phase, 230 V AC - Frequency: 50/60 Hz - Power input: 350 W - Current consumption: 1.5 A - Rotational speed: 1250 rpm - Airflow: 6000 m³/h - Protection rating: IP54 - Maximum static pressure: 110 Pa Csdpfx Ako Ahn N Aeteri - Static efficiency: 42.2% (within the measurement category) - Efficiency class: N = 51.9; required value: N40 - Control: Integrated electronic speed control - Control input: 0–10 V / PWM - Auxiliary voltage output: +15 V - Number of blades: 5 - Conformity markings: CE, EAC - Country of manufacture: Germany

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Cedezw Ucxspfx Aktsri Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Crjdpfx Aezw Ug Rjktei Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: used, Year of construction: 2004, used fan year of manufacture: 2004 with electric motor, 1400 rpm, 11 kW design B 3 V-belt drive with motor tensioning rails steel impeller, forward-curved, mounted on double flange bearings housing in welded construction with suction and discharge nozzles suction diameter 250 mm availability: short notice Codpfx Asz Svq Ejktjri location: Flörsheim

Condition: used, Year of construction: 1994, used in top condition cleaned functionality tested Manufacturer: Höcker Polytechnik Type: Year of manufacture: 6/94 Machine no.: 37273 Slow-speed operation, approx. 1400 rpm: 1460 Motor kW: 18.5 Connection diameter mm: 450 / 450x350 Pressure Pa: 2800 Air flow rate: 13200 m³/h Cedpfez Np I Sjx Aktsri Space requirement, approx. L x W x H mm: 2000x1200x1600 Weight, approx. kg: 150 Total connected load kW: 18.5 Location: 97447 Gerolzhofen, free loading, unpackaged Handover in the current condition as inspected without guarantee and warranty

Condition: used, Year of construction: 1999, Used Equipment Features and Technical Specifications: - Centrifugal fan with V-belt drive - Suitable for use in both raw air and clean air applications - Steel impeller with steel blades mounted on a multi-bearing intermediate shaft Crjdpezk Niysfx Aktsi - Air discharge direction GL 360/5 - Connection: 300 mm - Motor power: 11 kW - Airflow: 7,000 m³/h Availability: Immediate Location: Röllbach

Condition: used, total width: 1,120 mm, total length: 2,500 mm, total height: 1,820 mm, Year of manufacture: 2008 Colour: Grey Empty weight: 838 kg - Year: 2008 - CE marking present: Yes Cjdpfj Ah Ef Esx Aktori - Serial number: 630165 - Main motor power [kW]: 37 - Flow capacity [m³/h]: 25000 - Negative pressure [Pa]: 3152 - Connection diameter [mm]: 640 - Output diameter [mm]: 630 - Voltage [V]: 400 - Power [kW]: 37.0 - Transport dimensions: 2500mm x 1120mm x 1820mm (l x w x h) - Transport weight [kg]: 838kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, SAACKE VENTA MHI 25-56 A Industrial Radial Fan / High-Pressure Blower / Exhaust Fan, Used Equipment Main Data and Specifications: Manufacturer: SAACKE GmbH & Co. KG, Bremen / VENTA GmbH, Schwäbisch Hall Type: MHI 25-56 A Order No. (Auftrags-Nr.): VN1HU-011398-000 Crsdpfx Ake Ahqlvjtei Serial No. (A.Nr.): 26079/1 Model No. (M.Nr.): 33526 Airflow rate (Vn / V): 3950–4242 m³/h Pressure (ΔpS / ΔpT): 34.0 mbar / 37.5 mbar Rotational speed: 2930 rpm Motor Specifications (SCHORCH Three-Phase Motor): Power: 7.5 kW Voltage: 380/660 V (Δ/Y), 50 Hz / 440 V, 60 Hz Current: 15.5 / 8.9 A Rotational speed: 2920 rpm Mounting arrangement: IM B3 Protection rating: IP54 Overall Dimensions: Width: 680 mm Depth: 870 mm Height: 990 mm Weight: 210 kg Inlet and Outlet Dimensions: Inlet opening: Ø 260 mm Outlet opening: 280 × 180 mm

Condition: used, Year of construction: 2026, functionality: fully functional, CORMAK FM350 Dust Collector – Industrial Sawdust and Chip Extraction System The CORMAK FM350 is an industrial-grade dust extraction system designed for efficient and reliable removal of sawdust, chips, and fine particles in professional woodworking facilities. Thanks to its powerful suction performance, large-capacity collection bags, and the ability to connect up to four woodworking machines simultaneously, the FM350 provides effective dust control even in demanding production environments. Key advantages Powerful 3.8 kW motor (400 V) – ensures reliable continuous operation in industrial conditions. High airflow capacity of 4,860 m³/h – efficiently removes large volumes of sawdust and wood chips. Heavy-duty metal centrifugal fan – durable steel impeller provides quiet, vibration-free operation. Robust steel construction – powder-coated finish protects against corrosion and mechanical damage. Adjustable leveling feet – allow precise positioning even on uneven floors. Six 200 L collection bags – large waste capacity reduces the frequency of emptying. Quick bag replacement system – steel clamps enable tool-free and fast bag removal. Connection for up to four machines – suction manifold with 1 × Ø180 mm and 4 × Ø100 mm outlets provides flexible installation options. Crjdpfe Afnk Nox Aktji Construction and technology The CORMAK FM350 is equipped with a durable steel centrifugal fan and a reinforced support structure designed for intensive industrial operation. High-quality components ensure resistance to overloads and long-term reliability. The modern bag mounting system allows quick maintenance and convenient replacement of filtration and collection bags. Precision and performance Thanks to large-surface fabric filter bags and high suction pressure, the CORMAK FM350 dust extractor provides excellent working conditions even during heavy-duty woodworking operations. Effective dust removal improves air quality, increases operator comfort, and contributes to a safer production environment. Applications The CORMAK FM350 is designed for: wood processing plants – extraction from saws, planers, routers, and other woodworking machines professional carpentry workshops requiring multi-machine extraction technical schools and training facilities large industrial halls requiring a high-capacity sawdust extraction system Standard equipment 3 fabric filter bags 3 fabric collection bags Suction manifold: 1 × Ø180 mm / 4 × Ø100 mm Optional equipment Galvanized hose clamps 3-micron filter cartridge Technical specifications Parameter Value Extraction capacity 4,860 m³/h Collection bag volume 3 × 200 L Number of bags 6 Suction connections 1 × Ø180 mm, 4 × Ø100 mm Dimensions (L × W × H) 2355 × 590 × 2150 mm Weight 125 kg Motor power 3.8 kW Power supply 400 V / 3-phase PLEASE NOTE!!!! This machine is a returned item; it comes without its original packaging or splitter. NO WARRANTY AND NO RETURNS!

Condition: used, Year of construction: 2026, FAN1500 Material Handling Fan – Compact Industrial Blower for Sawdust and Dust Extraction The CORMAK FAN1500 is a compact industrial material handling fan designed for efficient extraction and pneumatic transport of sawdust, wood chips, dust, and other dry particles generated during the processing of wood, plastics, and composite materials. Equipped with a 1.5 kW motor and a high-efficiency centrifugal impeller, it delivers an airflow of up to 3,000 m³/h, making it a reliable component of professional dust extraction systems. Key Advantages Airflow up to 3,000 m³/h – efficient extraction and transport of sawdust and airborne dust 1.5 kW / 400 V motor – designed for continuous industrial operation 2850 RPM operating speed – ensures strong and consistent airflow 150 mm inlet and outlet connections – easy integration into dust collection systems Compact dimensions (575 × 510 × 500 mm) – suitable for workshops with limited installation space Heavy-duty steel construction – durable and resistant to demanding workshop conditions Cjdpfj Afnuzex Aktjri Construction and Technology The FAN1500 features a direct-drive centrifugal fan with an aluminum impeller mounted directly on the motor shaft. This design minimizes power losses while maximizing aerodynamic efficiency. The powder-coated steel housing provides excellent protection against corrosion and mechanical damage, while the rigid one-piece construction reduces vibration and operating noise. The fan can operate as a standalone extraction unit or as part of a larger centralized dust collection system. Performance and Efficiency The high rotational speed combined with the optimized impeller geometry ensures smooth and consistent airflow, even in environments with heavy dust concentrations. The FAN1500 efficiently transports fine and medium-sized wood waste without clogging, making it ideal for continuous industrial operation in woodworking shops, CNC production facilities, and manufacturing lines. Applications The CORMAK FAN1500 is suitable for: Woodworking workshops Furniture manufacturing facilities CNC machining centers with dedicated dust extraction Mobile dust collection systems Production lines generating sawdust and fine dust Plastic and composite material processing Standard Equipment Powder-coated steel housing 1.5 kW / 400 V three-phase motor Direct-drive centrifugal aluminum impeller 150 mm inlet connection 150 mm outlet connection Heavy-duty mounting frame Optional Equipment Flexible suction and discharge hoses (Ø150 mm) Adapters and reducers for different duct sizes Textile filter bags, cyclone separators, and final-stage filters Remote control and timer switch systems Technical Specifications Parameter Value Maximum Airflow 3,000 m³/h Inlet Diameter 150 mm Outlet Diameter 150 mm Motor Speed 2850 rpm Motor Power 1.5 kW Power Supply 400 V Dimensions (L × W × H) 575 × 510 × 500 mm Weight 32.5 kg PLEASE NOTE!!! This machine is a returned item; it has minor damage to the casing and bent grilles. It has been partially repainted. NO WARRANTY AND NO RETURNS!

Condition: new, Year of construction: 2023, functionality: fully functional, rotational speed (min.): 870 rpm, volume flow: 23,500 m³/h, type of input current: three-phase, overall weight: 23 kg, inlet: 800 mm, pressing: 180 Pa, input voltage: 380 V, power: 1.1 kW (1.50 HP), bolt circle diameter: 800 mm, input frequency: 50 Hz, NEW! Industrial Axial Fan 800mm dia. 23500m3/h 180pa Ziehl-Abegg FC080-SDS.6K.V7 VT0121 5pcs in stock Brand: Ziehl Abegg Type: FC080-SDS.6K.V7 Year of manufacture: 2023 - Flow rate (m³/h): 23,500 - Air pressure 170Pa max The range of applications of this Ziehl-Abegg spiral fan is very wide: air extraction, drying, air recirculation, air supply. 3-phase 2-speed motor 1030W/400W, 870/630rpm 400VAC (±10%) Δ/Y 50Hz, 1.65/1.05A, , IP54 - - Frequency: 50/60 Hz - Power supply: 400 V 50Hz IP54 - Connection type: terminal box - Diameter (impeller or turbine): 800 mm - Degree of protection: IP54 - Air flow direction: impeller towards mounting brackets - Air temperature range: -25°C to +55°C - Speed ​​(RPM): 890/650 - Current (A): 2.7/1.6 - 7-blade impeller made of galvanized sheet steel - Electrical connection via terminal box - Ball bearings - Overload protection protection via thermostat - Airflow direction: impeller towards mounting bracket - ​​Class F - RoHS compliance: Yes - Mounted: on bearings - Dimensions: 850x850x220 mm - Weight: 23kg Cjdoyfv Igopfx Aktori