Used Centrifugal Compact Fans for sale (7,416)

Condition: used, Year of construction: 2020, Format: 10 x 120 mm Equipment: Integrated Control USB interface Djdpfx As Aihqbjbbswd Timing: Automatic adjustment to the conveyor speed Wipe-on application method Legal Opinion (RH) Label sensor

Condition: good (used), Year of construction: 2014, functionality: fully functional, Intake temperature: 20° Dwodpfxjzn Rfke Abbod Density at the intake manifold: 1.2 kg/m³ Volumetric flow rate: 8.3 m³/min Engine speed: 2,882 rpm

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Djdpfx Aszw Ucxsbbswd Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Dwjdjzw Ug Repfx Abbsd Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, A new, unused centrifugal fan from Elektror is offered for sale here. This was bought for one of our projects but was never used. Availability: In stock Dwjdpfx Ajkt S S Nebbjd Quantity: 1 piece Further information can be found on the nameplates. Feel free to contact us if you have any questions.

Condition: new, Year of construction: 2022, functionality: fully functional, power: 2.6 kW (3.54 HP), overall weight: 35 kg, type of input current: three-phase, input voltage: 400 V, volume flow: 6,630 m³/h, fuel type: electric, ebm-papst: K3G450-PW12-07 centrifugal fan, radial fan, air supply fan, exhaust fan, high-pressure fan The impeller, motor and electronics are optimally matched to each other, resulting in an overall efficiency of well over 60%. The external rotor GreenTech EC motor contributes significantly to this efficiency. NEW!!! in stock: 3 pieces Manufacturer: ebm-papst Type: K3G450-PW12-07 Year of manufacture: 2022 Speed: 2040 min⁻¹ (revolutions per minute)​ Air flow q V: 6630 m³/h Air pressure: mac 948 Pascal Dsdpfxjxt I Nks Abbowd Place of origin: Germany​ Electrical parameters Power supply: 3 phases, 380-480V AC, 50/60Hz​ Current consumption: 4.1A / 400V​ Power: 2650W / 400V​ Other characteristics Efficiency: 70% (A, static)​ IP protection: IP55​ VSD (variable speed drive) integrated​ Ins.CI.F, AO, Electronically protected​ Standards: CE, EAC, UKCA, cRUus Dimensions Frame (height x width) 630 x 630 mm Impulse diameter: 450 mm Weight: 34.5 kg

Condition: used, Radial fan, fan, blower, control cabinet fan Control cabinet fan, radial module with support spider EBM PAPST Type K3G450-AZ30-61 Year of manufacture: 2015 Motor: M3G150-IF Design: Radial Air flow rate: max. 8040 m³/h Pressure increase: 1492 Pa Fan: Ø 450 mm Number of blades: 7 Dsdo Agw Enjpfx Abbewd Power connection: 3~ 380-480 VAC 50 / 60 Hz Nominal speed: 2750 rpm Power: 5370 Watts at 400 VAC Rated current: 8.3 A at 400 VAC Efficiency: 64.9 % Efficiency grade N: 67.7 External mounting frame: 550 x 550 mm Operating mode: Continuous operation (S1) Bearings: Maintenance-free ball bearings Protection class: IP55 Insulation class: F Compliance with standards: EN 61800-5-1; CE Approvals: CSA C22.2 No. 77 + CAN/CSA-E60730-1; UL 1004-7 + 60730-1; EAC Technical features: - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - External 24 V input (parameterization) - External enable input - Fault alarm relay - Integrated PID controller - Motor current limitation - PFC, passive - RS485 MODBUS-RTU - Soft start - EEPROM write cycles max. 100,000 - Control input 0-10 VDC / PWM - Control interface with safety-isolated SELV potential - Over-temperature protection, electronics / motor - Under-voltage / phase failure detection Dimensions W x H x D: 550 x 550 x 480 mm Weight: 54 kg Very good condition - from a test setup

Condition: used, Fan, Centrifugal Fan, Exhaust Fan, Used Machine Overall dimensions: 760 × 820 × 1040 mm Electrical specifications: 10 kW; 380 V; 16.7 A Inlet connection Ø: 410 mm Outlet connection: 195 × 315 mm Dwedpfxozi Ui Nj Abbjd Airflow : 10 000 m3/h

Condition: used, Keller Lufttechnik MKR 063-55 Fan Airflow rate: 37,000 Nm³/h Total pressure difference: 3400 Nm³/h Specific gas weight at 20 degrees Celsius: 1.2 kg/m³ Motor power: 55 kW Fan speed: 1475 rpm Year of manufacture: 1987 Item condition: used Dwodpfx Abjh Dpxasbed You can find more items – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2016, condition: used, Name: Used Centrifugal Fan Manufacturer: REITZ Type: KXE 050-035530-00 Year built: 2016 Speed: 2.960 / 2.809, max.: 3138 rpm Dsdpfsz Innaox Abbewd Driving force: 45 kW Throughput m³/h: V= 355 m3/min Material: regular steel Dimensions: L 2.300 x W 1.200 x H 1.420 mm Empty weight: Approx. 900 kg Technical doc.: yes, in German language Message: Intake temperature 20° and max. temperature 80°. Is unused, therefore as good as new! Accessories: Legs Condition: Used Price: On request

Condition: excellent (used), I offer robust centrifugal fans (blowers) in excellent condition – equipment is virtually unused. Perfect for industrial applications, ventilation, extraction, filtration systems or workshop installations. ⚙️ Technical data (from the nameplate) Power: 0.75 kW (1 HP) Supply: 3-phase 200/400V Frequency: 50 Hz Speed: ~1395 rpm Protection rating: IP54 Motor type: TECO 3-phase induction motor 📏 Dimensions (approximate) Inlet diameter: approx. 24–25 cm Construction: steel housing + metal impeller ✅ Advantages ✔ condition very close to new ✔ solid industrial build quality ✔ efficient 3-phase motor ✔ compact size ✔ ideal for dust, chip extraction, and ventilation systems Dsdpsz Smitsfx Abbjwd - PRICE INDICATED PER UNIT.

Year of construction: 1990, condition: excellent (used), Production: KOJA Year of manufacture: 1990 Power: 200kW, 370A RPM: 1485 rpm Air delivery: approx. 100,000 m3/hour Suction side: diameter 800mm Pressing side: 800 x 620mm Impeller diameter: 1800mm Housing dimensions: 3400x3100x2400 Net weight with engine: approx. 4.5t Aerodynamic control with inlet guide vane, grease-lubricated anti-friction bearings. The machine can be disassembled and transported with a standard truck. Dwjdsrgqm Hspfx Abbod

Condition: good (used), Euroventilatori XTTRC801LG0 Centrifugal fan High output centrifugal fan, mounted on stand with 37Kw motor, 3Ph Dodpfxotwdq To Abbswd

Year of construction: 2022, condition: used, A new, unused EVG Lufttechnik high-temperature centrifugal fan is offered. Volume flow: 245m³/h, max. speed: 5270rpm, max. medium temperature: 500°C, total pressure difference: up to 6172Pa, motor power: 1.5kW, voltage: 230/400V, efficiency class: IE3, degree of protection: IP55, weight: approx. 165kg. With Motovario electric motor and V-belt drive. Documentation fully available. Dedpsz Dki Eefx Abbewd

Condition: like new (used), 1 pc. Dassler high-pressure centrifugal fan is for sale single inlet with sheet steel housing with the following performance parameters: condition: new, unused type: DCAS-852-2T-10 suction: DN 280 Djdpfx Absyx Tbrobowd power: 7.5 kW air volume: approx. 4300 m3 / h speed: 2800 rpm air temperature conveyed: -20 to + 120 ° C motor: insulation class F / protection class IP55

Condition: used, Second-hand radial fan for extracting wood dust, wood shavings or similar materials. Technical data: - Motor: 0.82 kW Dsdpfozu Nibox Abbjwd

Condition: used, Second-hand centrifugal fan for extracting swarf, dust and light wood waste in woodworking workshops. The fan is ideally suited for use in extraction systems on individual machines or small machine fleets and ensures reliable air flow during continuous operation. Thanks to its robust industrial design, it is engineered for continuous use in workshops and production facilities. Technical data: - Motor: 5.5 kW - Inlet: 220 mm Dedpe Afxzgofx Abbewd - Outlet: 250 mm - Air flow rate: 60 m³/h

Condition: used, Spänex SP 315 KC 3.1 radial fan for the efficient extraction of swarf, dust and light wood waste in woodworking workshops. The fan is ideally suited for use in extraction systems on individual machines or in small machine fleets, and ensures reliable air flow during continuous operation. Thanks to its robust industrial design, it is engineered for continuous use in workshops and production facilities. Dsdpfezrypgsx Abbewd Technical data: - Air flow rate: approx. 6,400 m³/h - Motor power: 15 kW - Connection diameter: 320 mm

Condition: new, Year of construction: 2026, CORMAK FAN 11 High-Pressure Material Handling Fan – Premium Industrial Blower for Dust and Sawdust Extraction The CORMAK FAN 11 is a premium industrial high-pressure material handling fan designed for demanding dust extraction and pneumatic conveying applications. Delivering an airflow of up to 15,445 m³/h and powered by an 11 kW three-phase motor, it efficiently removes sawdust, wood chips, dust, and other dry particles generated during the processing of wood, metal, plastics, and composite materials. Its robust construction and high static pressure make it an ideal solution for large-scale industrial dust collection systems. Key Advantages High airflow capacity up to 15,445 m³/h for efficient extraction from multiple machines Powerful 11 kW motor for reliable continuous industrial operation Heavy-duty steel housing resistant to mechanical damage and corrosion Versatile application for sawdust, wood chips, dust, and other dry bulk materials Energy-efficient and low-noise operation optimized for long production cycles Dodpfx Aovugfwobbewd Flexible installation options for integration into customized extraction systems Construction and Technology The CORMAK FAN 11 utilizes a high-efficiency centrifugal impeller engineered to generate substantial airflow while maintaining high static pressure. The dynamically balanced impeller provides smooth operation with minimal vibration, while the welded heavy-gauge steel housing ensures excellent durability in demanding industrial environments. Designed for continuous-duty operation, the fan offers long service life with minimal maintenance requirements. Performance and Efficiency A precision-balanced impeller, industrial-grade electric motor, and optimized cooling system enable the FAN 11 to maintain outstanding performance during prolonged operation without overheating. Its high airflow and strong suction pressure make it ideal for extracting sawdust, wood chips, and fine dust from large woodworking machines, centralized collection systems, silos, and automated production lines. Applications The CORMAK FAN 11 is ideal for: Woodworking shops and furniture manufacturing plants Metalworking, plastics, and chemical processing industries Agricultural storage facilities and grain drying installations Automated production lines with centralized dust extraction Pneumatic conveying systems for dry industrial materials Standard Equipment Complete centrifugal fan assembly with 11 kW motor Heavy-duty steel housing with inlet and outlet flanges Industrial centrifugal impeller designed for continuous operation Optional Equipment Inlet and outlet diameter reducers Installation and mounting kits Cyclone separators and filtration systems Technical Specifications Parameter Value Maximum Airflow 15,445 m³/h Inlet Diameter 350 mm Outlet Diameter 350 mm Static Pressure 3187–2019 Pa Motor Power 11 kW Power Supply 400 V Dimensions (L × W × H) 920 × 1050 × 1060 mm Weight 170 kg

Condition: used, Centrifugal fan, Fan, Exhaust fan, HRV 56N-400/M GL 360, used machine Manufacturer: Venti Oelde Dsdpfx Abszwz Tdjbewd Type: HRV 56N-400/M GL 360 Overall dimensions: 1050 × 1120 × 1010 mm Weight: 280 kg Airflow capacity: 14,400 m³/h Year: 2014 Electrical data: 22 kW, 400 V, 50 Hz, 39 A

Condition: used, radial fan 2.2kw 5500m3/h supply fan VanDIJK radial fan air transport approx. 5500m3 stainless steel impeller. plastic housing direct drive motor 2.2 kw 380/220v revolutions: 2830/min pressure side pipe diameter: 250mm Dwodpfjufiz Rsx Abbsd suction side pipe 200mm

Condition: ready for operation (used), Centrifugal Fan, Fan, Fan 5.5 kW, Used Machine Dwsdpfx Ajvcax Hjbbed Overall dimensions: Length: 1710 mm Width: 1440 mm Height: 1660 mm Weight: 400 kg Electrical data: Voltage: 400V Current: 13.3A Power: 5.5 kW Motor specifications: Manufacturer: AEG Type: AMV 132 MV4/8 Blade dimensions: Diameter: 500 mm Width: 230 mm

Condition: used, Centrifugal fan, 18.5 kW, used machine Dwsdpfoyzypnox Abbjd Overall dimensions: 1680 × 1650 × 1260 mm Weight: 457 kg Electrical data: 400 V; 18.5 kW; 34 A Calculated air flow rate: 11,800 m³/h Calculated pressure: ~4500 Pa, 3.96 kg/s

Condition: new, Year of construction: 2026, FAN 7.5 Material Handling Fan – High-Capacity Industrial Dust and Chip Extraction by CORMAK The CORMAK FAN 7.5 is a high-performance industrial material handling fan designed for efficient extraction and pneumatic transport of wood chips, sawdust, dust, and other dry bulk materials. Equipped with a powerful 7.5 kW motor and delivering an airflow of up to 10,562 m³/h, it is an ideal solution for large woodworking shops, furniture manufacturers, agricultural facilities, and industrial production plants requiring reliable dust extraction. Key Advantages Airflow up to 10,562 m³/h – suitable for servicing multiple woodworking machines simultaneously High-pressure centrifugal impeller – generates suction pressure up to 2554 Pa Powerful 7.5 kW motor – designed for continuous industrial operation Versatile application – transports sawdust, wood chips, dust, and other dry particulate materials Heavy-duty steel construction – built for demanding industrial environments Construction and Technology The FAN 7.5 centrifugal fan features a robust steel housing designed for long-term industrial use. The dynamically balanced steel impeller ensures smooth operation with minimal vibration, even under continuous load. Its stationary design allows seamless integration into custom dust extraction and pneumatic conveying systems, making it suitable for a wide variety of industrial installations. Performance and Efficiency The CORMAK FAN 7.5 maintains strong and consistent airflow, ensuring efficient removal of sawdust, chips, and airborne dust without clogging extraction ducts. Its high static pressure enables reliable transport of heavier wood waste particles, improving workplace cleanliness, protecting machinery, and enhancing overall production efficiency. Applications The FAN 7.5 is suitable for: Woodworking shops and furniture manufacturing plants CNC machining centers, panel saws, spindle moulders, and planers Agricultural facilities handling grain, feed, and biomass dust Metalworking and industrial production plants requiring dry material extraction Centralized dust collection and pneumatic conveying systems Standard Equipment 7.5 kW / 400 V three-phase electric motor Heavy-duty steel centrifugal impeller 340 mm inlet connection Dwodpevugrdofx Abbjd 350 mm outlet connection Industrial steel housing for stationary installation Optional Equipment Flexible extraction hoses and quick-connect fittings Cyclone separators Final-stage filtration systems Automatic machine start/stop control modules Technical Specifications Parameter Value Maximum Airflow 10,562 m³/h Inlet Diameter 340 mm Outlet Diameter 350 mm Static Pressure 2554–1673 Pa Motor Power 7.5 kW Power Supply 400 V Dimensions (L × W × H) 810 × 900 × 980 mm Weight 125 kg

Condition: ready for operation (used), Fan with Airflow Meter, Centrifugal Fan, Exhaust Fan, Used Equipment Djdjvrzw Njpfx Abbewd Manufacturer: Szellőző Művek Budapest Model: SZB-300T Year: 1979 Overall dimensions: 320 x 380 x 540 mm Weight: 37 kg Electrical specifications: 400V; 2.6 A; 0.6 kW