Used Water Centrifugal for sale (8,325)

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, total height: 2,200 mm, total length: 1,700 mm, total width: 1,100 mm, rotational speed (max.): 2,650 rpm, power: 1.6 kW (2.18 HP), water tank capacity: 100 l, RÖSLER RZ 150 A cleaning system – automatic sludge removal For sale: a professional RZ 150 A cleaning system with automatic sludge removal. This unit is designed for industrial use, fully automated, and equipped with modern solutions to increase efficiency and durability. Key parameters: • Dimensions: 1700 x 1100 x 2200 mm • Power: 1.6 kW • Rotor speed: 2650 rpm • Rotor made of aluminum alloy • Steel housing Equipment and functions: • Smooth start and stop thanks to the frequency inverter • Adjustable sludge removal speed • Automatic retraction of the cleaning blade • Automatic removal of remaining water Pedpezca Apsfx Ab Tegu • Electronic vibration control • Automatic rotor flushing • Special bearing lubrication system to extend the unit's service life Central control unit E61-400: • Control and monitoring of the cleaning system • E61-400 control unit • SIEMENS S7-1200 controller • Ensures automatic and stable operation of the entire system Sludge removal time is adjustable from 2 to 5 minutes, depending on the consistency. A single cycle removes up to 25 kg of sludge. Additional system equipment: • Sandpiper P9 diaphragm pump for supplying water to the centrifuge • Pump operation cycle control • Water level control in the tank The set also includes a P 100 SB-P9 buffer tank for residual dirty water from the centrifuge. The tank is required if the centrifuge is located far from the source of dirty water. P 100 SB-P9 buffer tank: • Height: 700 mm • Capacity: 100 l • Designed for transporting dirty water and rotor flushing water to the buffer tank • Made of durable HDPE polyethylene (black color) • Sloping, 3-sided funnel-shaped bottom • P9 diaphragm pump – operating pressure 4 bar • Water level control RSKM 30 waste container: • Capacity: 300 l • Dimensions: 1300 x 820 x 800 mm • Manual operation • Can be transported and emptied using a forklift • Made of steel • Discharge port with drain plug • Equipped with a tilting mechanism The unit is robust, efficient, and ready for operation.

Condition: excellent (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, wastewater pump Pgjdezdt E Sepfx Ab Tsu -Dirty water pump: for coarse grit -Drive: 15 kW 980 rpm -Max. flow rate: m³/h -Max. delivery head: m -Dimensions: 1140/470/H505 mm -Weight: 331 kg

Condition: used, functionality: unexamined, machine/vehicle number: MTRE 15-9/5 | 10-10/10 | 5-10/10, Used Grundfos MGE112MC2 Centrifugal Water Pumps Manufacturer: Grundfos Various configurations: Pump MTRE 15-9/5 | Controller MGE112MC2 Pump MTRE 10-10/10 | Controller MGE132SD2 Pump MTRE 10-10/10 | Controller MGE112SB2 Pump MTRE 5-10/10 | Controller MGE1100LC2 Weight: varies from 42 to 74 kg. Pjdpfx Asxphqteb Tegu Power: ranges from 4.0 to 7.5 kW Voltage: 50/60 Hz, 380-400 Volt.

Condition: excellent (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, wastewater pump -Dirty water pump: for coarse grit -Drive: 11 kW 1470 rpm -Max. flow rate: m³/h -Max. delivery head: m Pgjdpfx Aozdt Efjb Tou -Dimensions: 940/400/H425 mm -Weight: 169 kg

Condition: not inspected (used), Manufacturer: Stork Capacity: 660 m3/h Pgjdpfsm Uc R Uox Ab Teu Engine: 160 kW

Condition: not inspected (used), Manufacturer: STORK capacity: 375m3/h Pedpsm Twrzefx Ab Tsgu motor: 90 kW

Condition: used, GRUNDFOS vertical multistage high-pressure centrifugal pump Pump in like-new condition, but a part of the magnetic coupling has been removed. Type CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m3/h Head: max. 91.8 meters Power supply: 400 volts, 50 Hz Power: 3 kW Pgedpfofupadex Ab Tsu - Pump design with 9 stages - Made of stainless steel 1.4401 - The like-new pump was used as a source of spare parts, but several new pump chambers are included - A part of the magnetic coupling is missing Suitable for potable water supply, irrigation, and drainage Packaged in the original wooden crate Pump dimensions (L x W x H): 1100 x 250 x 300 mm Shipping crate dimensions (L x W x H): 1400 x 330 x 340 mm Weight with shipping crate: 85 kg Like new Not a submersible pump or a deep-well pump.

Condition: used, Vertical multistage high-pressure centrifugal pump KSB Type Movichrom N CN 3/10 2R Serial no. 1-P30-837561 Nominal flow rate max. 3 m3/h Nominal delivery head 70 meters = 7 bar Nominal speed 2900 rpm Motor power 1.5 kW Mains connection 400 Volt, 50 Hz - Pump construction in 10 stages - Pump elements made of stainless steel, pump base made of cast iron - Connection flanges DN 32 - Suitable for drinking water supply, irrigation and drainage Space required for pump L x W x H 250 x 220 x 830 mm Psdpfxorl U S Eo Ab Tjgu Weight 38 kg Unused replacement pump from stock, as good as new Not a submersible pump or submersible pump

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Coolant pump: Coolant pump -Engine: Cantoni 3.0 kW -Immersion depth: 450 mm Pgodpfjv Iyl Rjx Ab Tsu -Overall dimensions: 500/340/H880 mm -Weight: 74 kg

Condition: excellent (used), Coolant pump, immersion pump, coolant pump, centrifugal pump, cooling lubricant pump Pgsdpshtryxefx Ab Tou -Manufacturer: Grundfos, coolant pump type SPK1-11/8 AAA -Drive: 0.25 kW 2850 rpm -Max. flow rate: 1.0 m³/h -Max. delivery head: 22 m Maximum temperature: 90 °C -Dimensions: 180/150/H590 mm -Weight: 11 kg

Condition: new, Mobile Cleaning Centrifuge ZS21-M EUR – Efficient Process Water Treatment | Made in Germany The ZS21-M EUR from Eurotec Innovation is the ideal solution for economical and sustainable solid-liquid separation in industrial applications. Thanks to its mobile design and plug-and-play system, this unit (new machine) is ready for immediate use and can be flexibly deployed in a wide range of production environments. Perfect for companies looking to reduce operating costs while optimizing their processes. Numerous additional variants and custom designs available on request. Machine type: Process water centrifuge (solid-liquid) Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Applications: Vibratory finishing, general solid-liquid separation, coolant (metalworking fluid) treatment, wet blasting systems, etc. ⚙️ Technical Data: Cleaning capacity: up to 30 liters/min Speed: approx. 4,160 rpm Centrifugal force: up to 2,070 g Drive power: 1.5 kW Pedpfef Sqfqsx Ab Tjgu Dirty water tank: approx. 99 liters Clean water tank: approx. 93 liters Voltage: 380 V / CEE 16A Your Benefits at a Glance ✔ Maximum mobility thanks to integrated trolley ✔ Compact design – flexible use in any production environment ✔ Extremely high separation performance due to >2000 g centrifugal force ✔ Significant cost savings through a closed water circulation system ✔ Reduced use of chemicals (e.g. compounds) ✔ Plug & Play – ready for operation within minutes ✔ Designed for continuous operation – high availability ✔ Environmentally friendly solution through resource conservation 🏭 Typical Applications: Vibratory finishing / tumbling Metal processing & metalworking fluids Wet blasting systems Washing, coating & phosphating processes Cleaning of emulsions & suspensions General industrial liquids Equipment: Dirty water buffer tank with agitator Double diaphragm compressed air pump PLC control system & automated operation Modular expandable & customizable From development to production, we supply all products from a single source – all “Made in Germany.” ----- We are happy to provide individual consultation and prepare a suitable offer. Simply send a non-binding inquiry! ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, fax, telephone, messaging portal). We will first provide you with a non-binding offer, including our general terms and conditions and information on the right of withdrawal along with legal notice details, before any purchase/contract conclusion is made.

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, pump -Manufacturer: Siemens - Schuckert, cooling water pump type W28/270 -Power: 0.2 kW / 2840 rpm -Immersion depth: 265 mm Pgjdohu Hw Aspfx Ab Tju -Dimensions: 320/190/H480 mm -Weight: 12.8 kg

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, functionality: unexamined, machine/vehicle number: HY-1000LPH, input voltage: 220 V, total height: 2,000 mm, total width: 1,000 mm, total length: 2,300 mm, energy consumption: 4 kWh, Equipment: documentation/manual, Reverse osmosis unit, purchased in 2020, and only tested once in 2024. Pjdpfxjz Iqrne Ab Togu The machine is being sold as is.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, temperature: 35 °C, operating pressure: 75 bar, energy consumption: 64 kWh, Industrial plant for the treatment and concentration of process water as well as for nutrient recovery. The plant combines a double-pass reverse osmosis (RO) system with a thermal evaporator unit and was originally developed for biogas production to recover ammonium-containing fertilizer from process water and digestate. The plant was never commissioned due to the operator's insolvency and is in a preserved condition. The system is suitable for operators from the industrial, environmental technology, or agricultural sectors who are looking for a rapidly available solution for water treatment, ZLD (Zero Liquid Discharge), or nutrient recovery. Technical data Pgjdpfx Aboyr H Ans Teu System type: RO Double Pass + Evaporator Model: SIMPEC RO Double Pass 8000 44 8 Evaporator 57 000 Year of construction: 2020 Permeate output: Stage 1: 7.5 m³/h Stage 2: 6.7 m³/h Permeate quality:

Year of construction: 2026, condition: new, functionality: fully functional, For sale: new Juneng DHZ360 self-cleaning disc stack centrifuge / separator. Manufacturer: Juneng Model: DHZ360 Type: disc stack centrifuge / centrifugal separator Condition: new / unused Seller: Leonagra s.r.o., EU company EU invoice possible Delivery to Slovakia / EU can be arranged The Juneng DHZ360 is an automatic disc stack centrifuge designed for high-speed centrifugal separation of liquids and fine solids. The machine is equipped with automatic cleaning and solids / sludge discharge, making it suitable for continuous industrial process applications. Technical specifications: Model: DHZ360 Drum diameter: 360 mm Rotary speed: 7,000 rpm Separation factor: 9,000 Motor: Y132M-4-B5 Motor power: 7.5 kW Dimensions L × W × H: 1,495 × 1,130 × 1,485 mm Weight: approx. 1,200 kg Automation: automatic cleaning and automatic solids / sludge discharge Typical applications: vegetable oil clarification edible oil processing oil-water-solid separation degumming / refinery process liquids industrial liquid clarification food and beverage process liquids fine chemical process liquids removal of fine suspended solids from liquids The DHZ360 can be integrated into existing process lines where continuous separation, clarification or polishing of process liquids is required. Final technical suitability should be confirmed according to the buyer’s product, viscosity, temperature, solid content, density difference and required separation result. The machine is offered as new equipment supplied through an EU seller. Final configuration, delivery time and documentation can be confirmed before order. Price: FCA / delivered EU by agreement, plus VAT where applicable. Pjdpfszlhdxex Ab Togu Zu verkaufen: neue Juneng DHZ360 selbstreinigende Tellerzentrifuge / Separator. Hersteller: Juneng Modell: DHZ360 Typ: Tellerzentrifuge / Zentrifugalseparator Zustand: neu / unbenutzt EU-Verkäufer: Leonagra s.r.o. EU-Rechnung möglich Lieferung in die Slowakei / EU kann organisiert werden Die Juneng DHZ360 ist eine automatische Tellerzentrifuge zur Hochgeschwindigkeits-Trennung und Klärung von Flüssigkeiten mit feinen Feststoffen. Die Maschine verfügt über automatische Reinigung und automatischen Feststoff- / Schlamm-Austrag und ist daher für kontinuierliche industrielle Prozessanwendungen geeignet. Technische Daten: Modell: DHZ360 Trommeldurchmesser: 360 mm Drehzahl: 7.000 U/min Trennfaktor: 9.000 Motor: Y132M-4-B5 Motorleistung: 7,5 kW Abmessungen L × B × H: 1.495 × 1.130 × 1.485 mm Gewicht: ca. 1.200 kg Automatisierung: automatische Reinigung und automatischer Feststoff- / Schlamm-Austrag Typische Anwendungen: Pflanzenölklärung Speiseölverarbeitung Öl-Wasser-Feststoff-Trennung Prozessflüssigkeiten in Raffination / Degumming industrielle Flüssigkeitsklärung Lebensmittel- und Getränkeindustrie Feinchemie Entfernung feiner Schwebstoffe aus Flüssigkeiten Die technische Eignung muss je nach Produkt, Viskosität, Temperatur, Feststoffgehalt, Dichteunterschied und gewünschtem Trennergebnis final bestätigt werden. Die Maschine wird als neue Ausrüstung über einen EU-Verkäufer angeboten. Endkonfiguration, Lieferzeit und Dokumentation können vor Bestellung bestätigt werden. Herstellerfotos, technische Unterlagen und Videobestätigung auf Anfrage verfügbar. Preis: FCA / Lieferung EU nach Vereinbarung, zzgl. MwSt.

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: • Manufacturer Magirus Eurofire Pgedpsxk T Efofx Ab Tou • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load • Mounts for 2 additional breathing apparatus • Roof compartment Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Firefighting Equipment: • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: good (used), Year of construction: 2017, Item: LC-10549 – Alfa Laval pump LKH70-110kW Alfa Laval LKH-70 Centrifugal Pump – 110 kW Used Alfa Laval LKH-70 sanitary centrifugal pump, suitable for high-capacity applications in the dairy, food, and beverage industries. The pump is equipped with a large Ø280 mm impeller and a powerful 110 kW motor. Technical data: Manufacturer: Alfa Laval Type: LKH-70 Year: 2017 Serial No.: 215309 Motor power: 110 kW Frequency: 50 Hz Impeller diameter: Ø280 mm Inlet: approx. DN100 Outlet: approx. DN80 Maximum flow according to Alfa Laval performance curve: up to approx. 260 m³/h, depending on the required head and product characteristics. Podpfxezymx Dj Ab Tegu CE marked Hygienic stainless-steel design Suitable for pumping milk, dairy products, water, and other low-viscosity food products. Original Alfa Laval performance curves are available. Machine located in Denmark and available for sale.

Year of construction: 2026, condition: new, functionality: fully functional, For sale: new Juneng KYDB204 disc stack centrifuge / 3-phase separator. Manufacturer: Juneng Machinery Model: KYDB204 Type: disc stack centrifuge / centrifugal separator Separation: liquid-liquid-solid / 3-phase separation Drum diameter :242(mm) Rotary speed: 8086(r/min) Motor model and power: Y112M-4-B5 4KW Capacity: 0.5-2m3/h(depend on material condition ) Power: 4(KW) Dimension（L*W*H） 830*610*1150(mm) Weight: 580(kg) Degree of automation :Automatic cleaning and slag discharging Dimension: 810*968*1139mm(L*W*H) Material: stainless steel, according to manufacturer specification Condition: new / unused Application: oil-water-solid separation, liquid clarification, fine separation Seller: Leonagra s.r.o., EU company EU invoice possible Delivery to Europe can be arranged The Juneng KYDB204 is a compact industrial disc stack separator designed for continuous liquid-liquid-solid separation. It is suitable for applications where oil, water and fine solid particles need to be separated in a closed centrifugal system. Typical applications: edible oil clarification vegetable oil / crude oil polishing oil-water separation fuel / lubricant treatment fine chemical liquid separation food and beverage liquid clarification industrial process liquid separation Main advantages: compact disc stack centrifuge design Podpfx Aszlby Hob Tjgu continuous operation closed inlet and outlet system high-speed centrifugal separation fine separation of liquid phases and solids stainless steel execution according to manufacturer specification suitable for integration into existing process lines The machine is offered as new equipment through an EU seller. Delivery, documentation and final technical confirmation can be arranged before order. Technical details to be confirmed according to final product application. Price: FCA / delivered EU by agreement, plus VAT where applicable. Zu verkaufen: neue Juneng KYDB204 Tellerzentrifuge / 3-Phasen-Separator. Neue Juneng KYDB204 Disc-Stack-Zentrifuge zur kontinuierlichen Flüssig-Flüssig-Feststoff-Trennung. Geeignet für Öl-Wasser-Feststoff-Trennung, Pflanzenölklärung, Prozessflüssigkeiten, Lebensmittel-, Chemie- und Industrieanwendungen. Kapazität: ca. 2.000 l/h, abhängig vom Produkt und Prozess Motorleistung: ca. 4 kW Ausführung: Edelstahl gemäß Herstellerspezifikation Zustand: neu / unbenutzt EU-Verkäufer: Leonagra s.r.o. EU-Rechnung möglich Lieferung nach Europa kann organisiert werden Technische Details und Eignung bitte je nach Anwendung final bestätigen.

Condition: used, Spin dryer for washed vegetables This centrifuge spins washed lettuce, vegetables or herbs dry. The product goes into the removable blue basket, the lid closes and the machine spins the water out, which drains through the outlet at the side. Spin time is set with the timer switch on the base. There is no manufacturer rating plate, so the make and year of manufacture are unknown. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Vegetable spin dryer (centrifuge) Basket: Removable plastic basket Controls: Timer switch Drain: Water outlet at the side Construction: Stainless steel, hinged lid Pgjdpfx Abjz Ndbxs Tou

Condition: used, Year of construction: 2011, Water treatment plant from Grünbeck for treatment of brewing and process water. Fully mounted on a stainless steel frame and controllable via Simatic S7-300. Reverse osmosis system for removing hardness compounds, salts, particles and micro-contaminants from water. This produces brewing water with the desired hardness. To protect the membranes, coarser particles are first removed in two fine filters (with pore sizes of 50 µm and 5 µm respectively). Desalination then takes place in two pressure pipes containing membrane modules. Includes sterilization filtration, membrane modules, chemical dosing, centrifugal pump, piping, valves, measurement technology, and control cabinet with touch panel. Additional title: reverse osmosis Permeate capacity: 8000 l/h ; Feed: 10000 l/h Recovery: 80 % Concentrate: 2000 l/h Max. overpressure: 16 bar Power: 6.5 kW Psdpfx Asz E Rv Uob Tjgu Voltage: 3 x 380 - 415 V Frequency: 50 Hz Water: feed 2.5 - 5 bar Length: 5000 mm Width: 1000 mm Height: 2000 mm Operation / Control: Simatic S7-300 Material: membranes from polyamid Base construction: on stainless steel frame with feet Features: 2 fine filters; pressure pipes with membrane modules; chemical dosing system with two dosing pumps; centrifugal pump (Lowara); various pipes, valves, and measurement equipment; control cabinet with touch panel

Condition: new, High-quality ZS38 PE centrifuge (new machine) from Eurotec Innovation – the ideal solution for cost-efficient solid-liquid separation in industrial processes. The system enables continuous recirculation processing, reducing operating costs and conserving resources sustainably. Machine type: Process water centrifuge (solid-liquid) Manufacturer: Eurotec Innovation GmbH Model: ZS38 PE Application: Vibratory finishing, general solid-liquid separation, coolant (metalworking fluid) treatment, wet blasting systems, treatment of industrial liquids ⚙️ Technical data: Speed: approx. 2,900 rpm Centrifugal force: up to 1,800 g Throughput: up to 1,400 l/h Drum diameter: 380 mm Power: 4 kW Tank volume: approx. 200 liters Temperature resistance: up to 70°C Advantages: ✔ High separation efficiency due to strong centrifugal force ✔ Significant reduction in disposal costs ✔ Reduced use of chemicals (compounds) ✔ Closed water circulation system ✔ Suitable for continuous operation ✔ Can supply multiple machines ✔ Environmentally friendly solution 🏭 Fields of application: Vibratory finishing / tumbling Metal processing Coolants and lubricants Washing & coating processes 🔧 Equipment: Dirty water tank with agitator Double diaphragm pump PLC control system Pgedpfx Ajhrh Ntjb Tju Modular expandable Further variants and custom designs available on request. From development to production, we supply all products from a single source – all “Made in Germany”. ----- We are happy to provide individual consultation and prepare a suitable offer. Simply send a non-binding inquiry! ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is intended solely as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, fax, telephone, messaging portal), where we will first provide you with a non-binding offer, including our general terms and conditions and information on the right of withdrawal with imprint details, before any purchase/contract conclusion is made.

Condition: excellent (used), Industrial centrifugal pump SPECK-PUMPEN Hilpoltstein for sale, complete with a Bauknecht 15 kW electric motor. Pump specifications: Manufacturer: Speck-Pumpen Hilpoltstein Type: 50/250 REZ Serial number: 68381 Capacity: 40 m³/h Head: 63 m Rotational speed: 2900 rpm Power consumption: 12 kW Pedpez Spapsfx Ab Togu Industrial design Manufactured in: Western Germany Motor specifications: Manufacturer: Bauknecht Type: 160M Power: 15 kW Voltage: 380 V Current: 29 A Rotational speed: 2935 rpm Frequency: 50 Hz cos φ: 0.90 Protection class: IP44 Insulation class: B Condition: Used pump, in working order. Visible signs of use and storage, including surface corrosion and paint chips. The unit is sold as a complete set: pump and electric motor. Visual condition as shown in the photos. Set weight: approximately 150 kg. Ideal for industrial applications, water, cooling, and circulation systems. The unit can be inspected before purchase.

Condition: excellent (used), For sale is an industrial KSB ETABLOC-GN 50-200/1502.21 centrifugal pump, equipped with a 15 kW KSB electric motor. The pump is designed for industrial applications, technological installations, water circulation systems, and other suitable media. Pump technical data: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 50-200/1502.21 Identification number: 48861841 Flow rate Q: 12–100 m³/h Head H: 55–34.5 m Psdpfoz Sn Susx Ab Tsgu Rotational speed: 2900 rpm Connections: flanged Motor data: Manufacturer: KSB Type: QUPA 160 M2B-6 Power: 15 kW / 50 Hz Voltage: 380–660–420 V Current: 27.8–16.1–25.2 A cos φ: 0.93 Protection class: IP55 Insulation class: F Motor weight: approx. 87 kg Condition: used, with normal signs of use and storage visible in the photos. A complete set consisting of the pump and electric motor is being sold, exactly as shown in the photos.

Condition: new, For sale: a NEW, unused KSB ETABLOC-G 32-200/552.2 centrifugal pump with a 5.5 kW electric motor. The pump comes from a warehouse stock and has never been used. It is offered with the original KSB carton. Pgodpfsz Snz Nex Ab Tou A professional, industrial monobloc pump from the renowned manufacturer KSB, designed for use in industrial installations, water circulation systems, cooling and heating systems, and technological systems. Technical data: Manufacturer: KSB Model: ETABLOC-G 32-200/552.2 Ident-No.: 48862635 Flow rate Q: 5–33.5 m³/h Head H: 47.5–25 m Pump speed: 2900 rpm Motor power: 5.5 kW Power supply: 3-phase Frequency: 50 Hz Voltage: 380–420 / 660–725 V Motor speed: 2880 rpm Ingress protection: IP55 Insulation class: F Net weight according to label: 62 kg Condition: NEW / UNUSED – warehouse stock. Original KSB carton included. The item sold is exactly the one shown in the pictures.

Condition: used, KSB Etaline GN Pump – Centrifugal Pump, Double Pump + Frequency Inverter Inline pumps and three-phase standard motor with motor-mounted frequency inverter for stepless speed control. - Areas of application: - Heating systems - Air conditioning systems - Cooling circuits - Domestic water systems - Water supply - Industrial circulation systems Fluid to be conveyed: Liquids that do not chemically or mechanically attack the pump materials. Operating data: 1450 rpm Design: Block pump in inline design, with speed-controlled standard motor, pump and motor shaft are rigidly connected. Bearings: Deep groove ball bearings, grease-lubricated. Shaft seal: Uncooled and maintenance-free mechanical seal according to EN 12756. Drive: Surface-cooled three-phase standard motor with motor-mounted frequency inverter and radio interference suppression filter according to DIN EN. Pgsdpfx Asivd Dksb Teu Pump series: Etaline Material combination: Gray cast iron Standard motor and keyed shaft Frame size designation: 65 Nominal size suction/discharge nozzle: 160 Item condition: used