Used flame-cutting machines for sale (33)

Condition: used, Year of construction: 1999, cutting width 3000 mm Numbers of torche 1 Cutting system Plasma PA-S 150 Ksdpfxszmy Tbs Adkodp total power requirement 4,5 kVA weight of the machine ca. ca. 8-12 t required space 16000 x 5000 mm

Condition: used, Year of construction: 2016, machine/vehicle number: 0605-260018, FICEP Flex FRC 1201 Notching Machine The Ficep FRC 1201 notching machine is part of the modern Ficep Flex series of notching machines. This modern CNC-controlled notching machine is designed for the rapid thermal cutting and notching of H, U, L, flat, and square tubes. The steel profile is positioned in the machine at the cutting location via a roller conveyor using a pulling tong carriage. A robotic arm equipped with the cutting units (oxy-fuel or plasma) cuts the profiles at the selected position. The cut or notched finished components either fall into the collection tray or are pushed out of the system by the measuring arm. Thermal Cutting Units: This Ficep Flex FRC 1201 profile notching system is equipped for thermal cutting using oxy-fuel and/or plasma. A Hypertherm HYPERFORMANCE PLASMA HPR 260 XD plasma power source, suitable for material thicknesses up to 32 mm, is used. Thicker materials or phase cuts larger than 32 mm are cut using the oxy-fuel cutting unit. Conveyor System: On the infeed side, in front of the Ficep Flex FRC notching system, there is a chain-driven cross conveyor with a length of 11,150 mm. The profiles (components) can be conveyed in both directions. The profiles are then transported into the machine on a sturdy roller conveyor using a clamp-type measuring cart. The system is designed for 12-meter-long profiles and therefore features 12-meter-long roller conveyors on both the inlet and outlet sides, each with a roller track width of 1,300 mm. To remove the finished components on the outlet side, four chain-driven cross conveyors, each 6,450 mm long, are located downstream of the notching station. Mitrol CNC Control and Pegaso Software: Ksdpfx Adezmbgvokjdp The system is controlled by a modern CNC control system from Mitrol. This reliable CNC control system, manufactured by Ficep’s in-house supplier Mitrol, features Pegaso software, including remote maintenance capabilities and a data transfer interface. Torit DCE Filter Unit The filter unit for dust extraction is a Donaldson Torit DCE. Safety: via fence and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of cutting unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching machine is in very good condition.

Condition: used, Light mark projector for flame cutting machines with drawing scanning -Type: 1.4 -Power: 24 V/100 W -f: 110 mm -Price: per piece -Number: 2x available Ksdpfxeb Uhr Is Adkedp -Dimensions: 230/93/H125 mm -Weight: 0.8 kg

Condition: used, Year of construction: 2006, CNC gantry flame cutting machine Manufacturer: Bach Type: ACK-2D Year of manufacture: 2006 CNC control: NBS300 Kodpfxsw El Udj Adkjdp Work table: 1.5 x 6 m 2 oxy-fuel torches 2726 hours

Condition: good (used), Year of construction: 2016, CNC Portal flame cutting machine Manufacturer: Sato Type: Satronik D5765 Kdjdpfjgqkc Nex Adkop Manufacture: 2016 CNC control: Satocontrol CNC 3010 Track width: 5.750 mm 6 x oxyfuel torche without tracks without table without filter

Condition: used, Year of construction: 1995, CNC portal flame cutting machine Manufacturer: Messer Type: Omnimat P 7000 Year of manufacture: 1995 CNC control: Global Control Plus Track gauge: 7,000 mm Kedpfxeyay Dhj Adksdp 8 x oxy-fuel torches, type ALFA 8 x Omnilift 200 Without rail Without table Without filter 2726

Condition: good (used), Oxy-fuel cutting device, with rotary table ideal for cutting weld seams Rotary table diameter 285 mm Maximum cutting diameter 600 mm Overall height 1150 mm Width 900 mm Kdodped Dti Isfx Adkep Depth 500 mm

Condition: used, Year of construction: 2008, FICEP Tipo B 251 sheet metal processing center Year of construction 2008 - sheet metal processing center - Plate size max. 6000x2500mm - 1 drilling unit - 6-fold changer incl. marking tool Kdodpoy E N Dpofx Adkep - 1 punching unit (currently without function) - 12-fold tool changer for punching tools - Conveyor belt for finished parts - Hypertherm HPR 260 plasma source - Donaldson Torit DCE extraction system - Machine weight according to manufacturer approx. 23 tons Main Technical Specifications Plate specifications on infeed side: • Length max. mm 6000 min. mm 2500 • Width max. mm 2540 min. mm 500 Work piece specifications on outfeed side: • Length min. mm 200 • Width min. mm 150 Punching Capacities (on 400N/mm² plates) • Punching force kN 1000 • Maximum stripping force kN 100 • Maximum hole diameter in punching mm 100 • Max. diameter on 20 mm thickness mm 38 Other Specifications : • Thickness of the large plate min. mm 6 • Thickness of the large plate (punching operations) max. mm 25 • Thickness of the large plate (thermal cutting) max. mm 32 • Thickness of the large plate (drilling operations - with optional device) max. mm 100 • Positioning weight max. kg 5000 • Linear weight of the large plate max. kg/m 750 • Max. vectorial traverse speed max. m/min. 30 • Cross positioning speed m/min. 40 • Working level’s height mm 1100

Condition: used, Year of construction: 2006, Web height min 80mm. max 1220mm. Flanges height min 42mm.max. 600mm. U channels min. 80mm 1200mm Flanges height min.45mm max 300mm. Angles min. 80x80x8mm max.300x300x50mm Flats min.100mm max.1220mm Square tubes min.80x80mm max.600x600mm Rectangular tubes min. 80x40mm max.1200x600mm Positioning weight max. 15000Kg Linear weight of the section to be handled max. 750Kg/m Kdsdpfjx N Iclex Adkjp Carriage speed max. 30m/min. No. of drill heads 3 - two horizontal Drill Heads with single spindle - one vertical Drill Head with single spindle Max. drilling diameter 50 mm. - with tapered adaptor No.4 Max. thickness that can be drilled 75 mm. Spindle rotation motor per head (a.c.) 15 kW Spindle R.P.M. (with continuous adjustment by program) RPM 180 - 3000 Positioning stroke to suit the gauge line :- vertical drilling unit 20 to 1200 mm.- horizontal drilling units 10 to 600 mm. TOOL CHANGE - number of tools change devices n. 3 - number of tools to be changed n. 6 - adaptor size ISO 45 Model 1260 BH for sections cold sawing : - sawing capacity at 90° min. 80 x 10 mm - sawing capacity at 90° 1250 x 600 mm - sawing capacity at 45° 800 x 600 mm - sawing capacity at 60° 500 x 500 mm - sawing band motor 11 kW - sawing speed 20÷100 m/min. - band size 67 x 1.6

Condition: good (used), Year of construction: 2002, Oxy-fuel cutting machine ESAB Suprarex SXE-P1 4500, no. 20.203.217, year of manufacture 2002, 2 kVA/230V, with controller, table size approx. 300 x 150 cm Kjdpfx Ajy N Trlsdkedp

Condition: used, functionality: fully functional, working width: 2,100 mm, working length: 3,100 mm, Ziener oxy-fuel cutting system with Kemper extraction table 2100x3100mm and Kemper extraction unit type 810700090. The system has 3 cutting torches, is fully operational, and can be inspected under power. Kjdpfxeyryris Adkjdp

Condition: new, Partial sales possible. Kodpfxsyw Rv Rs Adkedp Quantity discount only applies when purchasing the entire lot.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, For Sale. Ficep Tipo G25LG. Full description Is attached as a document. Kjdpfx Adeu Dxbtekodp Year built: 2017 With this line, the input and output is the following length: Input: 6M Output: 3M If you want more pictures or information please contact us.

Condition: like new (used), Year of construction: 2015, Ficep TIPO B254 Automatic CNC punching & thermal cutting systems for heavy plates Technical specifications Plate size [max. mm]: 2540x6000 Punching nominal force [kN]: 1000 Punching tool [no.]: 8 Kdodpfx Adoxn T H Dokop Punching diameter [max. mm]: 32 Punching thickness [max. mm]: 25 Drilling heads [no.]: 1 Drilling tools per head [no.]: 8 Drilling diameter [max. mm]: 40 Drilling thickness [max. mm]: 100 Spindle power [kW]: 20.1 Spindle speed [max. RPM]: 4000 Plasma torches [max. no.]: 2 Oxy-fuel torches [max. no.]: 1 Machine weight [kg]: 24000

Condition: like new (used), Year of construction: 2020, Ficep Raz 601 (also known as Nozomi) Kdodpfx Ajxq Rpnodkjp Automatic 9-axis CNC thermal coping robot Section size [min. mm]: 80x10 Section size [max. mm]: 610x450 Plasma torch [qty]: 1 Infeed length: 16 m Outfeed length: 16 m

Condition: used, Year of construction: 2010, machine/vehicle number: 0401-260013, The Peddinghaus HS FDB-2500 is a high-performance CNC plate processing center for the precise and economical processing of steel plates. The system combines drilling, thread cutting, countersinking, marking as well as oxyfuel and optional plasma cutting in one fully automated system - ideal for modern steel construction, plant engineering and industrial production. Kodoy Iankjpfx Adksdp

Condition: like new (used), Year of construction: 2022, Complete refurbished Ficep machine . Kdodpfx Adsx H T H Rokjp

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Machine has very low hours Kdodpfx Aov Iaqyedksp

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: ABCM 1250/3, type of input current: three-phase, Gas burner for I-beams. manufacturer - Peddinghaus Germany; Kdjdpfxjrbif Te Adkep type - ABCM 1250/3; control - Fagor; The device is connected and functional.

Year of construction: 1965, condition: used, machine/vehicle number: 2383, for pipe diameter: 250 - 530 mm for material thickness: 3 - 40 mm Drive: manual Space requirement: 1000 x 800 x 1200 mm Kedpjb Nv Stsfx Adkodp Weight: approx. 70 kg

Year of construction: 2002, condition: refurbished (used), flame cutting gantry Brand: SATO Model: SATRONIK HD 8000 Ksdpshzbi Tefx Adkjdp 8 Oxyfuel torches (2 TRIPLEX torches) SATO control with gas console. Year 2000 Useful cutting capacity: 6,000x24,000mm

Condition: used, Year of construction: 2013, table width 6000 mm table length 2000 mm burner heads 1 Equipment: Kdsdpfx Adoyk Dgzekop - Plasma source Kjellberg Hi Focus 161i - suction unit - Compressor Technical data Kjellberg Hi Focus 161i plasma cutter: Cutting current at 100 % ED 10 - 160 A Marking current 5 - 25 A Cutting range 0.5 - 50 mm Piercing up to 30 mm Dimensions (L x W x H) 985 x 570 x 1140 mm Mass 206 kg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, For Sale. Ficep Tipo G25LG. Full description Is attached as a document. Year of construction: 2019 Ksdpfx Adju Dw I Eskodp With this line, the input and output is the following length: Input: 8M Output: 8M If you want more pictures or information please contact us.

Condition: new, table width 1500 mm table length 3000 mm burner heads 1 Control CNC CNC plasma cutting system *NEW - AVAILABLE FROM STOCK* Furnishing: Cutting area 1,525 x 3,050mm Consisting of guiding machine, CNC control Plasma torch holder incl. torch height control, incl. Kdedpfx Adsiid Hwsksp Radio remote control and cross-laser for positioning, 1 license FastCAM programming software with Auto Nest Function and DXF,DWG import. Autogen set consisting of gas control solenoid valve, injector Machine torch torch holder, capacitive Height control, cutting range 10 - 50 mm plasma system Hypertherm Powermax 85 Sync CPC System Cutting range 1 - 20mm, cutting gas air Machine torch Smartsync 180° - 15.2 meters Machine is offered ex works. Without accessories (dye, anti-rust, aint mushroom, etc.) - further costs on request!

Condition: used, CNC oxy-fuel cutting system BACH, type ACW 2500 Oxy-fuel cutting machine with CNC control NBS 400 Machine No. 14 561-06, Year of manufacture 2006 Cutting area: 2500 x 6500 mm Travel length: 8000 mm Track gauge: 3345 mm Kdsdpfof Ncadox Adkjp Track height: 650 mm 2x machine cutting torches with cutting table