table length 2400 mm
table width 1200 mm
table height 200 mm
Btwkyyqivb
3D welding table - 3D clamping devices - 3D precision welding table
Our welding tables are milled out of HT 300 cast iron pipes and then nitrided.
The thermochemical treatment process of nitriding offers a wear-resistant and
corrosion-resistant surface.
Compared to other products, the nitriding treatment can double the wear
resistance.
This precision welding table D 28 made of HT 300 cast iron is designed in such
a...
Clamping plate, welding table, welding table, straightening plate, straightening table
-Table thickness: 21 mm
Npgpt
-Table: 1530 x 1400 mm
-Height: 810 mm
-Weight: 404 kg
0,6 t
-- mm
-- mm
consisting of:
30x article no. 2-280510
Quick release pin short
- Clamping of 2 components
- burnished
- with twist lock
8x article no. 2-280410.N
Brl7atdlbg
Universal stop 150 L - nitrided
- nitrided
- as standard with fine scaling on both sides
4x article no. 2-280420.N
Universal stop 225 L - nitrided
- nitrided
- as standard with fine scaling on both sides
8x article no. 2-280110.G
Stop and clamping angle 175 L - cast / black oxide finish
- Hole / elongated hole
- C...
table height: 650 - 1050messurements (LxWxH): 1400 x 900 x 650 bis 1050table width: 900table length: 1400weight approx.: 305This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with process...
table-size 500 mm
weight max. in kg ca. 500 kg
2 Stück
Bslzowt2vh
weight of the machine ca. 350 kg
Table Ø: 600 + 800 mm
Table load on 200 mm:650kg
Table load on 400 mm:200kg
Table load on 1000 mm:100kg
Rotation table: 0,076 - 1,5 °
Length: 1.200 mm
F8qs8bzcy
Width: 800 mm
Height: 800 mm
Weight: 500 kg
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or c...
table length 4000 mm
table width 2000 mm
table height 200 mm
3D welding table - 3D clamping devices - 3D precision welding table
Our welding tables are milled out of HT 300 cast iron pipes and then nitrided.
The thermochemical treatment process of nitriding offers a wear-resistant and
corrosion-resistant surface.
Compared to other products, the nitriding treatment can double the wear
resistance.
Btwkzvdzre
This precision welding table D 28 made of HT 300 cast iron is designed in such
a...
table diameter 400 mm
table load waagerecht 200 Kg
table load senkrecht 100 Kg
table turning speeds 0,2- 2 U/min
voltage 230 V / 50 Hz
total power requirement 0,55 kW
weight of the machine ca. 65 KG
dimensions of the machine ca. 0,65 x 0,5 x 1,0 m
Benyqcbcfe
unused stock machine
manual tilt adjustment
Start-Stop by foot switch
with CE
51 kg
-- mm
-- mm
consisting of:
30x article no. 2-280510
Quick release pin short
- Clamping of 2 components
- burnished
- with twist lock
8x article no. 2-280410.N
Universal stop 150 L - nitrided
- nitrided
- as standard with fine scaling on both sides
4x article no. 2-280420.N
Universal stop 225 L - nitrided
- nitrided
- as standard with fine scaling on both sides
8x article no. 2-280110.G
Stop and clamping angle 175 L - cast / black oxide finish
- Hole / elongated hole
- Cast / burni...
table height: 650 - 1050messurements (LxWxH): 2480 x 1230 x 650 bis 1050mmtable width: 1230table length: 2480weight approx.: 555This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with pro...
table length 1000 mm
table width 1000 mm
Beog0eajjf
table load 1,5 t
flange diameter 700 mm
turning speed max. 0,04 U/min
weight of the machine ca. 1,2 t
dimensions of machine L x W x H 1,60 x 2,0 x 1,50 m
table diameter 1400 mm
table load 5 t
swivelling range 0 - 135 Grad
turning speeds 0,05- 0,5 U/min
table height adjustment von 1100 bis 1950 mm
max. torque on the faceplate 7000 Nm
welding current 700 Ampere
including remote control and welding current transmission.
Fh7xvrd
table load 8 t
faceplate diameter 1500 mm
centre height 1150 mm
total power requirement kW
weight of the machine ca. 2 t
dimensions of the machine ca. 2x1,5x2 m
Tjzqj2k9
table length 590 mm
Benypo8w7c
table width 590 mm
table load 200 Kg
table turning speeds 0,23 - 2,3 U/min
table height 650 mm
total power requirement 0,55 kW
weight of the machine ca. 600 Kg
92 kg
-- mm
-- mm
Ylza8
table height: 650 - 1050messurements (LxWxH): 2480 x 1230 x 650 bis 1050mmtable width: 1230table length: 2480weight approx.: 733This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with pro...
250 kg welding positioner,
manual tilting,
turning speed 0,3-3,0rpm
Go82zcw
faceplate 655mm diameter
availible also for renting
table diameter 2000 mm
Bknk3g30
table load 10000 Kg
swivelling range 0 - 130 Grad
turning speeds 0,02 - 0,2 U/min
height adjustment 1450 - 2200 mm
max. torque on the faceplate 20000 Nm
engine output 1,5 / 2,0 kW
welding current 1000 Ampere
- Manual height adjustment.
- Self-locking gearbox, therefore hardly any pre and after-run at eccentric
Load.
- Electronic components from Schneider, Siemens and Delta.
- Frequency-controlled, stepless speed of the turntable.
- High stability due to th...
table length:1200 mm
table width:1200 mm
Biidvfjbsh
table load:1,8 t
total power requirement:220/380 V
dimensions of the machine ca.:2300 x 1200 x 1300 mm
table diameter 450 mm
table load waagerecht 300 Kg
table load senkrecht 150 Kg
table turning speeds 0,2- 2 U/min
voltage 230 V / 50 Hz
total power requirement 0,55 kW
weight of the machine ca. 80 KG
dimensions of the machine ca. 0,65 x 0,5 x 1,0 m
Btr9hlva
unused stock machine
manual tilt adjustment
Start-Stop by foot switch
with CE
table length 1000 mm
table width 1000 mm
Bs7l3ktemn
table load 1,5 t
weight of the machine ca. 1,0 t
dimensions of the machine ca. 2,0 x 1,7 x 1,8 m
table height: 800messurements (LxWxH): 1450 x 950 x 800table width: 950table length: 1450weight approx.: 315
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable ...
table diameter 1200 mm
table load 3 t
swivelling range 0 - 135 Grad
turning speeds 0,07- 0,7 U/min
table height adjustment von 980 bis 1750 mm
max. torque on the faceplate 4500 Nm
Blnsr390va
welding current 700 Ampere
including remote control and welding current transmission.
floor-plate length 4500 mm
floor-plate width 1600 mm
Brhjjuzznr
floor-plate height 370 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
plasma-nitrided, the Professional 750 table has a hole arrangement in a 50 mm grid on the table top and a parallel hole arrangement in a 25 mm grid on the sides. The holes have a diameter of 16 mm.
The table has a material thickness of approx. 11.5 - 13 mm and is made of high-quality steel S355J2+N. Grid lines at intervals of 50 mm make it easier for you to assemble your fixture.
Space requirement: 1500 x 1000 x 100 mm
Machine weight: 281 kg
Bnkeoswx2q
table length 2400 mm
table width 1200 mm
table height 200 mm
weight of the machine ca. 1,0 t
The Professional Extreme table Article no. 7 has 2400x1200x200 mm
a diagonal arrangement of holes on the table top and a parallel one
Hole arrangement in 50 mm grid on the sides.
The holes have a diameter of 28 mm and the table one
Material thickness of approx. 24.5-27 mm. The table top is made of hardened
Colwiz8o
Tool steel manufactured.
The little stressed side walls are still off for reasons of co...
table height: 800 mmmessurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 288
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enab...
table diameter 1000 mm
table load 1200 Kg
swivelling range 0 - 135 Grad
turning speeds 0,1 - 1,0 U/min
height adjustment 1000 - 1450 mm
max. torque on the faceplate 2000 Nm
engine output 0,75 / 0,55 kW
welding current 500 Ampere
Mvdc3o
- Manual height adjustment.
- Self-locking gearbox, therefore hardly any pre and after-run at eccentric
Load.
- Electronic components from Schneider, Siemens and Delta.
- Frequency-controlled, stepless speed of the turntable.
- High stability due to the ro...
total power requirement 230 Volt
table diameter 300 mm
table load 100 Horizontal kg
B2gb0lkt
swivelling range 0 - 90 Grad
turning speeds 0,2 - 2,0 U/min
turning speeds 1,2 - 12,0 U/min
bore 20,0 mm
weight of the machine ca. 50 kg
dimensions of the machine ca. 480 x 325 x 470 mm
Furnishing:
- Precise drive unit with face plate, on a stable floor stand.
- clockwise / counterclockwise
- 2 speed series, stepless
- Swivel range from 0 ° - 90 °. Manual tilt
- DC gear motor with worm gear, infinitel...
Stierli- ROTATOR 2000 / 12 to
360° turning device for fast and safe turning and rotating of beams, profiles and welding components. Use for welding, plastering, fast welding visual inspection, as assembly turning device etc....
Capacity: 12 tons
Swing circle diameter: 2000 mm
Length of parts: freely selectable (stands are freely positionable by means of hand pallet truck)
Adjustment of working height: Steplessly adjustable
Gegyiyvga
The Stierli rotator was developed to turn heavy and large l...
table diameter 1100 mm
table load 2 t
swivelling range 0-135 Grad
H2ly29d
excentricity 200 mm
table height 1000 mm
table turning speeds 0,01 - 1,0 U/min
Torque 4000 N/m
total power requirement 1,1 kW
dimensions of the machine ca. 1,7 x 1,2 x 1 m
table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950table length: 1950weight approx.: 365This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with process...
table diameter 1300 mm
table load 3000 Kg
swivelling range 0 - 130 Grad
turning speeds 0,05 - 0,5 U/min
height adjustment 1200 - 1800 mm
max. torque on the faceplate 6000 Nm
engine output 1,1 / 1,1 kW
welding current 700 Ampere
- Manual height adjustment.
- Self-locking gearbox, therefore hardly any pre and after-run at eccentric
Load.
- Electronic components from Schneider, Siemens and Delta.
- Frequency-controlled, stepless speed of the turntable.
- High stability due to the robust con...
table diameter 340 mm
table load 290 horizontal kg
table load capacity 190 vertikal kg
Djkjkcr
turning speeds 0,6 - 6,0 U/min
spindle bore 60,0 mm
swivelling range 0 - 90 Grad
weight of the machine ca. 62 kg
dimensions of the machine ca. 380 x 340 x 425 mm
Furnishing:
- The table can be tilted and clamped at an angle of 0 to 90
- Start / stop via a location-independent foot switch.
- Direction of rotation can be selected right / left.
- Adjustable rotation time.
- The turntable has a 60 mm ho...
Stierli- ROTATOR 600 / 6 to
360° turning device for fast and safe turning and rotating of beams, profiles and welding components. Use for welding, plastering, fast welding visual inspection, as assembly turning device etc....
Capacity: 6 tons
Swing circle diameter: 600mm (e.g. beam HEB 600)
Length of parts: freely selectable (stands are freely positionable by means of hand pallet truck)
Bttlv8lhn9
Adjustment of working height: Steplessly adjustable
The Stierli rotator was developed to turn he...
table diameter 560 mm
table load 0,3 t
Muu2kk
swivelling range 0-90 Grad
table turning speeds 0,25 - 4 U/min
Torque max. 360 N/m
centre of gravity max. 150 mm
total power requirement 0,4 kW
table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950table length: 1950weight approx.: 475This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with process...
table diameter 350 mm
table load 100 / 50 Kg
swivelling range 0 - 90 manuell Grad
turning speeds 0,6- 6,0 U/min
spindle bore 30 mm
Torque 75 Nm
welding current 500 Ampere
Gvuddg
connected load frequency 230 Volt
Welding turntable with mobile, height-adjustable machine table
- Footswitch
- tip over winch
- Speed infinitely adjustable
- 500 amps welding current transmission
table diameter 340 mm
table load 160 horizontal kg.
table load 100 vertikal kg.
swivelling range 0 - 90 Grad
turning speeds 0,6 - 6,0 U/min
bore 60,0 mm
motor 230 Volt
B2fyjfws
weight of the machine ca. 56 kg.
range L-W-H 385 x 340 x 375 mm
Furnishing:
- The table can be adjusted at an angle of 0 to 90 degrees
tilt and jam
- Start / stop via a location-independent foot switch.
- Direction of rotation can be selected right / left.
- Adjustable rotation time
- The turntable has a 60 mm hollow ...
OFFER 21138
Welding rotary tilt table with circular seam welding unit
Technical data:
B0fa0p8e
- Load capacity horizontal / vertical 290 / 180 Kg
- Turntable diameter approx. 300 mm
- Hollow shaft 60 mm
- Table height in horizontal position 450 mm
- Tilting range 0 - 90 °
- Welding current transmission up to 300 A
- infinitely variable Rotation speed 0,6 to 6 rpm
- Cycle control COM 1000
- welding torch stand adjustable in X , Y , Z
- Tailstock with shielding gas supply
- 3 jaw chucks 200 mm
...
table diameter 495 mm
table load 0,3 t
swivelling range 0-90 manuell Grad
table load horiz. 300 Kg
table load vert. 150 Kg
Dongmspp
boring diameter 65 mm
table height 500 m
table turning speeds 0,3 - 3 U/min
voltage 230 / AC V
total power requirement 0,2 kW
weight of the machine ca. 0,1 t
dimensions of the machine ca. 0,5 x 0,52 x 0,5 m
table height: 650 - 1050messurements (LxWxH): 1450 x 950 x 650 bis 1050table width: 950table length: 1450weight approx.: 428This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with process...
2000 Kg kapacity, high adjustable
Worktable Size 1200mm
Thx7ivcd
Tilting Speed 0,25 rpm
Tilting Angle 0 ~120°
Rotating Power 1,1 kw
Tilting Power 1,5 kw
Worktable Vertikal Travel 1450mm ~ 2050mm
table diameter 780 mm
table load 1,0 t
swivelling range 0 - 135 Grad
turning speeds 0,15 - 1,5 U/min
table height adjustment von 780 bis 1560 mm
max. torque on the faceplate 1000 Nm
welding current 500 Ampere
Blnsramjy7
including remote control and welding current transmission.
table diameter 500 mm
table load 300 horizontal kg.
table load 150 vertikal kg.
swivelling range 0 - 90 Grad
turning speeds 0,2 - 2,5 U/min
bore 90,0 mm
table height ~ 650 mm mm
motor 230 Volt
weight of the machine ca. 90,0 kg.
range L-W-H 385 x 340 x 375 mm
Furnishing:
- The table can be tilted and clamped at an angle of 0 ° to 90 °
- manual tilting
- Start / stop via location-independent foot switch
- Direction of rotation can be selected right / left
- Adjustable rotation time
- The contro...
work surface 3,000 x 1,500 mm
working height 900 mm
plate steel full material 190 mm
Jibcvpz
weight approx. 6,600 kg