5
Welding smoke filter, welding smoke extraction
-electrostatic filter
Qktl02z0k
-Extraction arm: 4000 mm
-mobile
1
For suction of oil mist:
Bkqroqkp9o
1 piece Oilcube type OEN-3000 with two 3m hose extraction arm, joints outside TK-OEN 3000 mobile extraction and filter unit
3
volume capacity 2500 m3/h
motor 1,1 KW
suction capacity 2500 m3/h
feed volume 99,9 %
motor 230 Volt
weight 80,0 kg
length 3.000 Absaugschlauch mm
range L-W-H 580x580x900 mm
Description:
The filtoo filter device newly developed by TEKA is
a mobile filter system that many
Tasks in the field of filtration of
Smoking, dusts and gases can be used.
Also suitable for high-alloy steels (stainless steel).
(the device was based on DIN EN ISO 15012-1 (2005)
tested and is IFA (formerly BGIA) certified (I...
1
SRF Maxi. (Picture on the right)
3 m suction arm
Scope of application
Medium smoke and dust
Regular usage
Use
Little run the extractor hood
required
Bavzgca3wr
Contamination free filter change
Safe operation due to phase sequence detection
High efficiency due to long
Service life of the filter
Properties
Safe operation through filter monitoring
Extractor hood 360 degree rotating and swivelling
Automatic start/stop system (optional)
Workplace lighting (optional)
Technical data
Procedure 2-speed
...
2
3500 m³/h
3000 Pa
2,2 kW
72 dB(A)
400 V
665 x 681 x 2100 mm
160 kg
G7tonih
3
bar material dia. max.: ca. 50 mm
air flow quantity: 200 m³/h
weight: ca. 20 kg
total power requirement: 1,1 kW
filter surface area: 0,8 m²
electrical connection: 230 / 6 V / A
dimension machine xH: 0,6x0,3x0,6 m
welding suction filtering device
machine is a mobile filtering device with suction hose and dust catcher via floor insert.
Insert: welding suction for burning of low temperature and unalloyed steels
filter sytem : continous filtering cartridge
including suction hose (see picture) L=4800...
5
Blower filter device, welding smoke filter, welding smoke extractor, breathing apparatus
-filters
Niwfb
-in the suitcase
-with out battery
-Dimensions: 420/165/H335 mm
-Weight: 3.2 kg
7
volume capacity 2500 m3/h
0 3000 mm
total power requirement 1,1 kW
weight of the machine ca. 0,08 t
dimensions of the machine ca. 0,58x0,58x0,58 m
N92d9
3
Mobile Euromate fume extraction unit: These are low vacuum systems for welding fume extraction and filtration. Their size and mobility make them ideal for smaller manufacturing facilities that require light to medium duty welding fume extraction in variable locations. Not suitable for use with cutting or arc gouging operations.
Bi7sikvnoc
1
SRF master figure left
2 m suction arm
Scope of application
Low smoke and dust
Sporadic usage
Use
Little run the extractor hood
required
Flexible by additional hose connection rear
Properties
Safe operation through filter monitoring
Extractor hood 360 degree rotating and swivelling
Push handle and cable holder
Sswrzo
Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3
Additional fi...
3
3500 m³/h
3000 Pa
Bv3kojlame
2,2 kW
72 dB(A)
400 V
665 x 681 x 2100 mm
160 kg
4
Type of equipment Mobile cartridge filter system with suction element
Make TEKA
type Strongmaster
IFA-tested incl.
BGIA certificate
Supply voltage 3 x 400 Volt
Separation efficiency > 99 % for steel,
high-alloy steels,
W3 approval
Max. Fan volume flow 3,000 m³/h
Motor power 1.1 kW
Design mobile workshop unit with extraction arm,
3 meter long in hose version
Dimensions L x W x H 665 x 820 x 1.365 mm
Noise level approx. 70 dB(A)
Weight 130 kg
Age 12 months
Condition workshop tested, like new
...
5
Welding smoke filter, welding smoke extraction, soldering smoke extraction
-Drive: 1.1 kW
-Connection: 380 V 50 Hz
-Feed rate: 700 m³/h
-Max. Pressure: 1,600 Pa
-Inlet diameter: 200 mm
-Outlet diameter: 250 mm
-Number: 1x suction available
-Price: per piece
G9d9qp
-Dimensions: 1320/655/H1275 mm
-Weight: 192 kg
6
Dust extraction, welding fume extraction, filter cartridge self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust.
The filter is cleaned pneumatically with compressed air impulses during operation which results in high efficiency of the device.
Fan on clean side which reduces the risk of explosion to a minimum.
2 fans 11 Kw (22 kW)
Hvoxvxp
Capacity up to 12000 m3/h
2
Suction welding table make LOKOMA type 1006
Machine # 1009/91210 Year of construction 1989
technical data:
table length 1000 mm
Npj939fp0
table width 800 mm
table height 840 mm
Power 1,1 Amp
power supply 380 V / 50 Hz
with
- suction downwards
- lateral outlet
little used, in very good condition
6
IPE Welding fume extraction with articulated arm - suction funnel Filter area: 9 m2Max. Volume flow: 1600 m3/hNominal volume flow: 1108 m3/hInterface vacuum: 2450 PaSuction diameter: 140 mmMotor power of fan: 2.2 KWA connection power: 3.0 KWLength/width/height: 790/790/2750 mmWeight: 175 kgLocation: From stock 54634 Bitburg - freely loaded -
Bfxuae2xdy
1
2500 m³/h
Bu3do0hpex
2500 kPa
volume capacity 1600 m³/h
feed volume > 99 %
1,1 kW
72 dB(A)
0,58 x 0,58 x 0,9 m
80 kg
230 V / 50 Hz V
1
Nederman welding fume extraction for industry and trade.
Consisting of:
High vacuum blower VAC 20 - 2500
Outlet 200 mm
Max vacuum pressure 21,5 Kpa
Weight with motor 616 KG
Compressed air quality clean according to ISO 8573-1 class 5
2 pcs. Filter units
Type F22C
For the connection of many welding places.
Hkra92zqw
The unit can be inspected and tested in our warehouse.
5
Welding smoke filter, welding smoke extraction
-Suction tube: flexible
-Diameter: 230 mm
-Length up to: 7 m
-Price: per piece
-Number: 3 pieces
H8j8ezfk
-Dimensions: 1250/290/H270 mm
-Weight: 22 kg
8
TBH LN 260 Extraction and filtration unit
AREA OF APPLICATION
- sticky and moist dusts
- laser emissions
- soldering fumes
- solvent and adhesive fumes
Electronically commutated motors for full power and less energy consumption.
Tool-free filter change
4 castors for mobile use
Protection class 1
Brushless motor - works very quietly (approx. 62 db(A))
Type of drive: Brushless
Weight: 60 kg
Dimensions HxWxD: 750x350x655 mm
Colour of housing RAL 7035
Air volume flow, free-blowing m3 /h max. 320
...
4
Welding fume extraction make SCHMIDT u. KRANZ type Airator SKP 22
Machine # 617 Year of construction 1996
technical data:
Capacity per hour 1800 m³
speed 2850 rpm.
Power 1,5 kW
Power supply 380 V / 50 Hz
external dimensions approx. 700 x 1300 x 3000 mm
with
- 1 movable suction nozzle 3,0 m
- mobile design
Pryeoe
- aut. filter cleaning
- direction of rotation control
- CE-marking
used, in good condition
8
Welding fume extraction: EMK - 1402
Connection: 230 Volt
Engine: 0,75 KW
Performance with suction pipe 1100 m³/h
Suction pipe
Mobile
Bejct9gxkh
Weight: 116 kg
Location: At Camp 54634 Bitburg
-free load-
8
The device sucks in polluted air and cyclones this air with the water in the tank.
The dust is mixed and captured by this atomisation.
The wet particles are retained and transformed into sludge, which then
which then lies at the bottom of the tank.
The (easy) cleaning is done by scraping.
The device is easy to use and does not require a pump, nozzle or suction nozzle,
or nozzle, which makes it very practical and easy to maintain.
Bwrz2c3qcv
The concept of our appliances respects the environment....
5
TEKA welding torch extraction HandyCart with automatic.
Bhs8hrs2jf
Continuous runner - mobile - without accessories (these can be ordered from us).
5
Extraction of oil mist, emulsion mist, oil mist separator, oil smoke filter, cartridge filter, welding smoke filter, welding smoke extraction, soldering smoke extraction
-with electrostatic filter: 2 pieces
-with pre-filter: 3 pieces
-with high voltage transformer:
-Drive: 1.5 kW
-Connection: 380 V 50 Hz
-Air output: 4000 m³0/h
-Dimensions: 1480/1090/H675 mm
-Weight: 142 kg
Bft2kcgmcz
1
Extraction capacity: 1200 m³ / h
Drive: 0.75 kW
Bjljxyczux
Space requirement: 700 x 660 x 1030 mm
1
Mobile extraction system Fabr. NEDERMANN series 662
Article-No. 613662, control no. 90120-00
Lfjol
Technical data:
Volume flow up to 1000 m3/h
Fan power 0.75 kW
Power supply 380 v / 50 Hz
External dimensions approx. 700 x 500 x 950 mm
Weight approx. 60 kg
with
-Fan
-Extraction arm
-Silencer
-Mobile
used, in good condition
5
Manufacturer: Fume Extractor
Filter above: 280 x 280 x 20 mm
Filter Center: 270 x 270 x 230 mm
Filter bottom: 280 x 280 x 30 mm
Wt2820u7
Filter Chamber: 360 x 360 x 270 mm
Clip diameter: 45 mm
Power: Connection: Accessories/equipment: mobile
Condition: good
Weight: dimensions: 400 x 630 x 750 mm
8
High vacuum suction and filtration unit Nederman
Mwph9g
Mod: E - PAK 500
year: 2002
Power - 13 kW
Filter cleaning method - air reversal - impulse
Max volume flow m³/h - 860
vacuum unit with silenced direct driven
side channel compressor
Automatic filter cleaning during suction operation.
Dimensions: 1200 x 690 x 2000 mm in height
Ideal for welding fumes and grinding dust.
Weight: 340 kg
6
Industrial exhaust fan
Offer number: 19495
Make: SMALL
Type: MHV 615-125-7.5
machine no.: 1409275272
Year of construction: 2017 ( unused )
Technical data:
- volume flow 3637 m³/h
Jl788hzn
- Pressure difference Pfa 6728 Pa
- Rated speed 2950 rpm
- Shaft power 5200 Watt
- Sound pressure 92 dB ( A )
- Motor 400 V / 7.5 kW
- Space requirement approx. W 1050 x H 1050 x D 650 mm
- Weight approx. 210 kg
5
Hall extraction system, filter system, welding smoke filter, welding smoke extraction, soldering fume extraction
Cicjm9msu
-Vibration motor Siemens: 0.18 kW
-Pipe inlet: Ø 280 mm
-Pipe outlet: Ø 235 mm
-Dimensions: 1255/1215/H3000 mm
-Weight: 380 kg
1
Extraction capacity approx .: 1300 m³ / h
Gs2myy9yq
Filter area approx .: 28 m²
Separation bottom near: 100%
Arm length: 2 x 2 m
Arm suction Ø: 150 mm
Extraction motor: 380 V, approx. 1.1 kW
Required space: 1250 x 600 x 800 mm
Weight: 98 kg
2
Welding fume extraction Fabr. NEDERMANN type cannot be identified
Pprqtysza
Estimated year of production 1993
Technical data:
Number of filter cartridges 2
Exhaust fans 380 V, 0.47 kW
Space without suction nozzles B x T x H 920 x 850 x 1120 mm
with
-electrostatic filter unit
-flexible suction nozzles 2 m long with a lamp
-mobile execution
used from a reversal of the operation, little used and
very well received € 1250,--
7
brand : Euromate
Type : MFE2-D
info : with arm FTA 33
spec : 380 volt - 1150 Watt
Year of construction ??
Prices are without VAT
shipping is possible (extra cost)
(Changes and errors in the technical data, information
and prices and subject to prior sale!)
Ccut90x
3
Donaldson Torit Welding Extraction
1500 m³ /h flow rate
Bg2pbuzim
42m² filter area
1,1 kw power
230V
1
Weld mist extraction
offer number: 05394
Make: KEMPER
Type: 91550
machine no.: 223796
Year of construction: 1993
mobile version
Technical data:
- electrostatic filter with indicator light
- mobile version with articulated extraction arm 3000 mm
- Air volume flow approx. 1200 m³/h
- max. static pressure 1300 pa
- Filter area approx. 9.6 m²
- Filter control lamp for filter change
- Drive - fan 220 V / 0,75 kW
Biboaql7vl
- Space requirement approx. W 660 x H 1400 x D 660 mm
- Weight approx....
5
Welding smoke filter, welding smoke extraction, soldering smoke extraction, small dust extractor
-Esta: Small dust extractor OM-8
Bixiqifz7d
-Drive: 0.37 kW
-Extraction arm: 3400 mm
-Dimensions: 500/1330/H1550 mm
-Weight: 76 kg
1
Inlet diameter: 55 mm
1 suction speed
Electr. Connection: 230 V
Space: 700 x 280 x 370 mm
Becnc3xw7x
1
WF welding smoke filter Fabr. ILT type WF 2300
Masch. # 831133-year of production 1988
Technical data:
maximum air output 2300 m3/h
Filter area 30 cm2
Dimensions 650 x 950 x 1150 mm
with
Pprq7jynb
-3 m hose proboscis
-mobile execution
used
7
Welding trigger, welding smoke suction
Manufacturer: Kemper
Type: 6410005
Year of construction: 2009
Filtration capacity: 1200 m3 / h
Articulated extraction arm approx. 3 meters
New filter
Compression 1350Pa
Electrical power: 1.1 kW 380 V 50 Hz
Machine weight: 80kg
Cadx8z8e
7
Extractor for laser, welding, dust, high-pressure self-cleaning LINCOLN brand.
Cartridge filter cleaned during operation by pulses of compressed air, thus high efficiency of the device.
High-pressure turbine motor with 5.5 Kw and a vacuum of 17.650 PA!
capacity 500 m3/h
3cnwavw
6
Offer 21264
Technical data:
- BIA tested welding extractor
- mobile version with articulated extraction arm 3000 mm
- air volume flow approx. 1000 m³/h
- max. static pressure 2700 pa
- filter surface approx. m²
- filter control light for filter change
- degree of separation 99,9
- Compressed air connection 4 - 6 bar
- drive - fan 400 V / 1,5 kW
- Space requirement approx. W 660 x H 1800 x D 950 mm
- Weight approx. 140 kg
Jajc7epei
5
Welding smoke filter, welding smoke extraction, soldering smoke extraction, small dust extractor
-Kemper: mobile welding fume extractor type 1450
Ewjzbflk8
-Drive: 0.75 kW
-Volume flow: 1200 m³/h
-Extraction arm: 3 m
-Dimensions: 730/900/H2575 mm
-Weight: 126 kg
Suction power of the appliance: 182 m³/h
Vqqg7y
with 5 m 45 air hose Ø: 159 m ³/h
Filter surface: 9.6 m2
Electr. Connection: AC 220 V
Weight: 20 kg
Space: 850 x 330 x 450 mm
2
Welding smoke suction system Fabr. LINCOLN NORWELD type SP 25
Masch.# 2299 built in 1999
Technical data:
Performance p. St. 2600 M3
Ntntshxzo
with a water column 1950 mm / WG
Speed 2930 UpM.
Motor kW 30
External dimensions approx. 1800 x 1150 x 1300 mm
used, in good condition
5
Has been replaced by a fixed suction unit
fully functional
high filter efficiency
low noise level
flexible in use
Daojcz2
12
Keller welding dust extractor, welding fume extractor with pre-separator-spark trap
Self-cleaning, pneumatic filter for plasma, laser, sandblasting, sodding, grinding of plaster, cement, plastics and all kinds of dry dust.
The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device.
Sinbran type filter cartridges almost new.
SINBRAN filter cartridges are environmentally friendly and therefore suitable for pharmaceutical and food industry....
4