Used Welding smoke suction for sale (170)

Condition: good (used), Year of construction: 2016, operating hours: 5,268 h, suction capacity: 4,000 m³/h, negative pressure: 3,000 Pa, Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: TEKA Model: Filtercube 2H Year of manufacture: 2016 operating hours: 5268 Filter cleaned by microprocessor controller with compressed air pulses during operation by which high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Cobu Ujtpvcyefnwsgt Parameters: Sound-insulated fan with a power of 3 Kw. Capacity 4000 m3/h Vacuum pressure 3000 Pa Inlet diameter : 315 mm Filtration area: 50 m2 control cabinet technical documentation Possibility of ordering new filter cartridges tailored to the customer's needs.

Condition: new, Year of construction: 2007, Functionality: fully functional, type of input current: three-phase, input voltage: 400 V, volume flow: 10,000 m³/h, filter area: 5.4 m², nominal current: 14 A, frequency: 50 Hz, Never used Cgebu Ujvd A H Njfnwet

Condition: reconditioned (used), Year of construction: 2018, type of input current: AC, input voltage: 400 V, volume flow: 3,800 m³/h, filter area: 100 m², suction capacity: 3,800 m³/h, negative pressure: 3,500 Pa, compressed air connection: 5 bar, power: 55 kW (74.78 HP), nominal current: 12 A, frequency: 50 Hz, input current: 25 A, motor voltage: 400 V, Equipment: type plate available, Dust extraction, welding fume extractor, cartridge filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, sod, shot blasting and all types of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys version 2 Production year: 2018 Filter cleaned by microprocessor control with compressed air pulses during operation ensuring high efficiency of the device. Low compressed air consumption thanks to "Power-Spray" system The Filtercube central filter unit with cartridge filters is the ideal solution for almost all problems in the field of smoke and dust filtration. The fan is located on the clean side, which minimizes the risk of explosion. Application central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general indoor filtering (push-pull system, displacement system) extraction system in combination with extraction table Extraction system for sanding non-exploding materials Parameters: 5.5 kW fan Capacity 3800 m3/h Vacuum 3250 Pa Inlet diameter: 250 mm Filter surface of 100 m2 Cjbu Ufjr H Hitjnwsgt Machine is delivered completely ready for use including NEW set of 4 cartridge filters. Placed on top of machine support to accomodate for dust disposure in 200L standard barrel.

Condition: used, Extraction capacity of the unit: 182 m³/h with 5 m air hose 45 Ø: 159 m³/h Filter surface: 9,6 m² electr. connection: alternating current 220 V weight: 20 kg Cobu Ufeb Nv S Eenwjgt Space requirement: 850 x 330 x 450 mm

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, type of input current: AC, overall weight: 45 kg, input voltage: 230 V, total width: 4,064 mm, total length: 7,366 mm, total height: 6,604 mm, filter area: 5 m², suction capacity: 180 m³/h, pressing: 36,000 Pa, power: 1.5 kW (2.04 HP), The device has seen little use and is in very good condition and fully functional. Specifications The ClearO2 W100 is designed to complement the 8XE MIG and 8XR MIG cobot extractors from Translas. With the combination of the welding fume burners of the 8XE MIG and 8XR MIG cobot extractors and the ClearO2 W100 devices, we capture between 90% and 98% of the welding fumes at the source and filter them with an efficiency of > IFA 99.8%. The compact device is perfect for relocation in the workplace due to its low weight - only 45 kg - and its four wheels, two of which are lockable. Automatic cleaning The ClearO2 W100 device has an automatic cleaning function by reverse compressed air pulse. As soon as the negative pressure in the filter is too high, the device automatically starts cleaning the filter. A manual cleaning function can be performed by pressing a single button. The automatic start/stop function to save energy and synchronize the device with the 8XE MIG and 8XR MIG Cobot extraction units is standard on the ClearO2 units. As soon as the gun is removed from the specially designed torch holder, the machine starts working automatically. Continuous duty motor Cobusvpgkcj Ufnwogt The unit's electric motor is designed to work continuously without losing power. Thanks to the automatic cleaning function and simplified motor system, the maintenance of the unit is minimal, making it durable and time-saving. With a filter area of 5 m², this is one of the most efficient units of its size with the largest filter. The filter is disposable and has an active surface with an efficiency of: IFA >99.8%. Lightweight and mobile The ClearO2 W100 units are designed to meet the needs of a single welder who needs to change his workplace. Examples of such applications include shipbuilding, wind tower construction, tank building and other similar manufacturing industries. The four wheels with two locks and the low weight - only 45 kg - allow the welder to easily move the device to the next work location. [Source: translas]

Year of construction: 2000, Condition: good (used), Stock number: 2739 Manufacturer: TEKA Year of manufacture: 2000 Type: PP-DC Number: 201320 Volume flow: 320 m³/h Max. Negative pressure: 22.000 Pa Connection diameter: 50 mm Equipment: mobile, portable Accessories: hose 3.000 mm Connection: 1.2 kW 230 V Weight: approx. 40 kg Dimensions: 300 x 300 x 850 mm without hose Cgsbu Ufnemf Uzxjwst

Year of construction: 2023, Condition: new, Welding fume extraction, welding fume extraction, self-cleaning filter, pneumatic, vacuum. STAN 1000 is designed for extraction and cleaning of air from dry dust during welding, grinding, polishing, casting and cutting of metals and plastics. STAN 1000 is equipped with a three-stage filter system with integrated regeneration system for the main cartridge. The contaminated air is cleaned by a metal pre-filter (spark arrestor), a cartridge main filter and an outlet cartridge made of non-woven fabric impregnated with activated carbon. The main cartridge regeneration system, which uses compressed air to clean the cartridge filter from accumulated impurities, has its own compressed air tank with a capacity of 10 liters. STAN 1000 is recommended for tasks that require continuous extraction and filtration of air contaminants. As a supplement to the Stan 1000, the Oskar 160 extraction arms with a reach of 3 m. or 4 m. are recommended. The model STAN 1000 EC shown in the pictures has: Fan with brushless EC motor and 0.78 kW inverter, soundproofed. Air volume : 1000 m3/h Automatic cleaning of the filter cartridge Self-supporting tube exhaust arm L=3.0m, D=160mm, hood 315mm Three filter stages: - Coarse 30 % metal pre-filter (G2). - Filter cartridge with 99 % efficiency for particles ≥ 0.5 μm - Outlet filter impregnated with coarse 70 % activated carbon (G4) Filter cartridge with PTFE membrane in filter class F9 Coarse waste drawer under the pre-filter Grate and dust bin under the main filter Cgobu Ufenabuzenwst Welded housing made of powder coated steel Sound pressure level: 64 dB(A) Possibility to choose different configurations tailored to the needs of the customer. Polish product. The indicated price is the price of the presented model. Mechanical warranty for the device: 12 months

Year of construction: 2024, Condition: new, Healthy room air for industry and trade Air hygiene is also more important than ever in industrial plants, because processes such as welding, tacking or cutting produce toxic fumes or fine dusts that must be safely extracted to protect employees, products and machines. The Plug & Play filter tower for hall ventilation is the ideal supplement or replacement when spot extraction is not sufficient or practical. More quality, more motivation, more well-being at work! Flexible hall ventilation without any piping The mobile extraction system for industrial halls for the extraction of welding fumes and smoke can be installed quickly and easily according to the plug & play principle. The installed EC fans with IE5 technology are energy-saving, quiet and at the same time enormously powerful. Due to the integrated pre-separator, coarse particles and possible sparks are already separated before reaching the main filters. This significantly increases the filter service life. Optionally, a HEPA H14 filter with a separation efficiency of 99.995 % can be used for carcinogenic fine dust, viruses and bacteria. For processes such as Welding tacking Separating Soldering Cebu Ufnei Ab E Ujwegt Flame cutting

Year of construction: 1991, Condition: ready for operation (used), machine/vehicle number: 004744, extraction capacity: 1200 m³ / h Csbsfm Ekxeu Ufnwjgt drive: 0.75 kW space requirement: 700 x 660 x 1030 mm

Year of construction: 2017, Condition: excellent (used), Stock number: 2727 Manufacturer: ESTA Year of manufacture: 2017 Type: KAF 100 Cjbu Uelt Uinjfnwegt Number: 16002366 Volume flow: 700 m³/h Max. Negative pressure: 1.100 Pa Connection diameter: 50 mm Equipment: mobile Accessories: see picture, among others laboratory suction arm connection: 0,55 kW 230 V Weight: 42 kg Dimensions: 485 x 485 x 920 mm without hose

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Cgsbu Ufjrhidmjnwot Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: used, machine/vehicle number: 1980 100 175, Max. volume flow: 220 m³/h Pressure max. 22000 Pa electr. connection: 230 V Cgsbu Ufob Nv S Sonwst weight: 16,5 kg Space requirement: 720 x 320 x 410 mm

Condition: used, Year of construction: 2007, suction capacity: 3,300 m³/h, negative pressure: 3,500 Pa, Dust extraction, welding fume extraction by Keller. For collecting and separating dust, such as fine particles of metal oxides and fumes generated in thermal processes such as joining, separation or surface treatment using laser, plasma or gases. Self-cleaning, pneumatic filter for plasma, laser, sandblasting, soda blasting, grinding plaster, cement, plastics and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Fan with a power of 5.5 kW. Capacity 3300 m3/h Negative pressure 3500 Pa Cgebuevxt Elj Ufnwst Inlet diameter - 400 mm Electrical documentation included. Dimensions of the device: height - 3.30 m total width - 1.35m x 1.15m stock number: 0953

Year of construction: 1992, Condition: good (used), Extraction capacity approx .: 1300 m³ / h Filter area approx .: 28 m² Separation bottom near: 100% Arm length: 2 x 2 m Arm suction Ø: 150 mm Extraction motor: 380 V, approx. 1.1 kW Required space: 1250 x 600 x 800 mm Weight: 98 kg Cgjbu Ufnjfug Euowjt

Condition: used, Year of construction: 1999, suction capacity: 5,600 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extraction, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which results in high efficiency of the device. Sinbran filter cartridges. SINBRAN filter cartridges are environmentally friendly and therefore suitable for use in the pharmaceutical and food industries. They are suitable for separating aerosols of organic materials, such as those created during laser cutting operations. SINBRAN filter cartridges combine the advantages of membrane filters with the advantages of rigid body filters: Large filter surface requiring minimal space. High mechanical load capacity, very long life cycle, low pressure drop and high filtration efficiency is a new approach to dust removal that achieves impressive filtration results, even in particularly difficult applications. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters it causes minimal pressure loss. Short compressed air pulses during the filtration process ensure effective filter cleaning. 7.5 Kw fan Cjbu Ufnovxtkzswegt Efficiency 5600 m3/h Sinbran filter inserts 12 pcs. Negative pressure 3000 Pa

Condition: ready for operation (used), Suction nozzle Ø: 55 mm 1 suction speed electr. connection: 230 V Cgobu Ufnsd Hbv Dswot space requirement: 700 x 280 x 370 mm

Year of construction: 1999, Condition: good (used), DISA dust extraction, welding fume extraction, self-cleaning cartridge filters, pneumatic filters, vacuum filters for plasma, laser, sandblasting, soda blasting, shot blasting, plastics and catalysts, mineral processes and all kinds of dry dust. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. Cgobuohqd Tvj Ufnwst Fan on the clean side which reduces the risk of explosion to a minimum. Highly durable filter cartridges resistant to moisture. Aluminized, antistatic, operating temperature up to 135 degrees celsius. Fan power 11 Kw Efficiency up to 8000 m3/h. Vacuum up to 4300 Pa Filtration surface 128 m2

Year of construction: 1991, Condition: ready for operation (used), machine/vehicle number: 201327/2, Suction capacity: 1200 m³/h Max. static pressure: 1350 Pa Cebsnwmtceu Ufnwogt electr. Connection: 380 V, 0.75 kW Required space: 700 x 660 x 1030 mm Weight:

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is Cgobsib Dadeu Ufnwot where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Year of construction: 2019, Condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system Cgebu Usnyhvqofnwet "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Condition: excellent (used), Year of construction: 2019, operating hours: 2,595 h, filter area: 302 m², suction capacity: 13,250 m³/h, negative pressure: 7,230 Pa, The Gold Series industrial dust collector is a leading dust and fume extraction system for welding, grinding, thermal cutting, shot blasting, sandblasting, and glass bead blasting. Ideal for retaining toxic and flammable dust and fumes. The vertically mounted cartridge filters in the Gold Series dust collector use the patented HemiPleat technology, which keeps them cleaner and lasts longer than conventional pleated filters. Vertical operation of the filter elements allows for their effective cleaning with a compressed air pulse. Filter cartridges with different properties provide the best cleaning efficiency for different types of dust, including fine, fibrous and heavy dust loads. The filter is pneumatically cleaned with compressed air pulses during operation, which ensures high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: Camfil Model: Gold Series GS10 Year of production - 2019 Worked hours - 2595 h New HemiPleat eXtreme Flame Retardant cartridge filter cartridges - 10 pcs. Filtration area 302 m2 37 Kw fan. Efficiency 13250 m3/h Negative pressure 7230 Pa Inlet diameter - 500 mm Equipped with HEPA H14 Absolute VGXL fine filters and a noise silencer. The device worked on grinding stainless steel. The device is in very good condition (like new), it worked inside the room. Csbuevu Tpce Ufnwsgt

Condition: good (used), Year of construction: 1997, suction capacity: 1,300 m³/h, negative pressure: 2,000 Pa, Welding fume extraction, dust extraction, self-cleaning, pneumatic, negative pressure filter KEMPER. For welding, grinding, sandblasting and all types of dry dust. The device has new cartridge filter inserts. The filter is cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. The device is mounted to the wall, the extraction arm is mounted at the bottom of the device. The device has 2 extraction nozzles - it can work with two extraction arms Fan with a power of 1.5 Kw Csbu Uetqd Hvofnwegt Capacity 1300 m3/h Negative pressure 2000 Pa

Condition: good (used), Year of construction: 2002, Functionality: fully functional, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum filter KELLER VARIO T. For plasma, laser, sandblasting, soda blasting and all types of dry dust. Cgebu Ufnjvu Rylewjt The fan is placed behind the filter on the clean side, which reduces the risk of explosion initiation to a minimum. The filter is cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Fan with a power of 3.3 kW inlet diameter - 315 mm Dimensions: height - 2.05 width - 1.02 m depth - 1.60 m weight 700 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 4,480 h, overall weight: 1,800 kg, suction capacity: 20,000 m³/h, Novus 20000 m3/h filter tower Filtration of industrial welding halls - numerous technological processes in production plants, carried out mainly in metalworking. Top suction and draught-free exhaust at the bottom - exactly in the work areas. The principle of stratified filtration, the device does not require the installation of pipelines. Cartridge filter cartridges - self-cleaning by means of compressed air pulses during operation. Cleaning of filters by means of pressure difference - no loss of compressed air. The principle of stratified ventilation : contaminated air is drawn in from above, filtered, and then released at floor level as clean breathable air without generating drafts, at speeds of less than 1.2 m/s. Exactly where workers inhale it. And that's over a wide 270-degree range. In doing so, the tower operates according to the principle of layered ventilation, recommended by labor unions and considered the best type of air circulation. Brand name: NOVUS Model: air FTower-20,000 Year of production 2013 working hours : 4480 Parameters: 15 Kw fan Air flow rate 20000 m3/h Filtration area 222 m2 6 pieces of cartridges Additional final fine filter with a surface area of 65 m2 in the filtration class F9 gives us a higher efficiency of air purification and further protects the fan in case of damage to the main filter. Dust drawer with a capacity of 200 l. Cgebu Ufnjt R N Tlswot Very quiet operation of 75 dB (A) Cleaning degree - > 99,9 % Technical documentation included Stock no.: 0900

Condition: good (used), Year of construction: 2014, operating hours: 7,062 h, suction capacity: 20,000 m³/h, Novus filtration tower - Pioneer 20000 m3/h. Cjbujrqfkxe Ufnwegt Filtration of industrial welding halls - numerous technological processes in production plants, carried out mainly in metalworking. Suction from the top and draft-free exhaust from the bottom - exactly in the work areas. The principle of stratified filtration, the device does not require the installation of pipelines. Cartridge filter cartridges - self-cleaning by means of compressed air pulses during operation. Cleaning of filters by means of pressure difference - no loss of compressed air. The principle of stratified ventilation : contaminated air is drawn in from above, filtered, and then released at floor level as clean breathable air without generating drafts, at speeds of less than 1.2 m/s. Exactly where workers inhale it. And that's over a wide 270-degree range. In doing so, the tower operates according to the principle of layered ventilation, recommended by labor unions and considered the best type of air circulation. Year of manufacture 2014 operating hours : 7062 Parameters: 15 Kw fan Air flow rate 20000 m3/h Filtration area 222 m2 6 pieces of cartridges Additional final fine filter with a surface area of 65 m2 in the filtration class F9 gives us a higher efficiency of air purification and further protects the fan in case of damage to the main filter. Dust drawer with a capacity of 200 l. Very quiet operation of 75 dB (A) Equipped with a programmable timer , which allows us to turn the device on and off at the times and days we set. Cleaning degree - > 99.95%