Used Sincro 315 for sale (5,008)

Condition: used, Year of construction: 2021, operating hours: 550 h, USED GUIDETTI SINCRO MILL 315 CABLE RECYCLING LINE – 2021 For sale: a used, compact cable recycling line manufactured by the renowned Italian company Guidetti Recycling Systems. The SINCRO MILL 315 is designed for processing mixed electrical cables, including both rigid and flexible copper or aluminum cables, without the need for preliminary sorting. Despite its compact design, the machine integrates the complete recycling process into a single system: * blade granulator, * zig-zag separator, * refining turbine, * dry density separation table. Rigid metal fractions, plugs, and connectors are separated directly by the zig-zag system, while plastics and thinner wires are further processed in the refining turbine. This solution improves separation quality and minimizes metal losses in the plastic fraction. The line produces clean copper or aluminum granulate and a separated plastic fraction. According to the manufacturer, the purity of the recovered materials can reach up to 99%, depending on the type and condition of the input cable. TECHNICAL DATA Manufacturer: Guidetti Recycling Systems Model: SINCRO 315 MILL Year of manufacture: 2021 Serial number: S315M210077 Operating hours: just over 500 hours Production capacity: approximately 130–180 kg/h, depending on the input material Installed power: 21 kW (according to the machine nameplate) Power supply: 400 V / 50 Hz / 3P+PE Full-load current: 37 A Dimensions: approximately 2316 × 1475 × 3100 mm Weight: 1,200 kg CE marked: Yes MAIN ADVANTAGES * complete cable recycling process integrated into one compact machine, * suitable for mixed rigid and flexible cables, * processing of copper and aluminum cables, * no preliminary cable sorting required, * high-quality separation of metals and plastics, * low operating hours, * compact footprint, * relatively low energy consumption, * easy operation and maintenance, * Italian manufacture. CONDITION Gbedoz D I Sqspfx Al Uju The machine is used and has only slightly more than 500 operating hours. It is offered as a complete, integrated cable recycling unit.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,860 h, functionality: fully functional, machine/vehicle number: 3155220747, overall weight: 458 kg, rotor diameter: 300 mm, number of blades: 5, total length: 1,130 mm, total height: 1,570 mm, total width: 1,000 mm, power: 6.1 kW (8.29 HP), type of input current: three-phase, input voltage: 380 V, blade width: 300 mm, Equipment: documentation/manual, The compact SINCRO 315 EKO granulator is designed for recycling rigid and flexible cables. By shredding and subsequently dry-separating the material, it effectively separates copper and aluminum from insulation (such as plastic, rubber, or paper). The machine can be fed either manually or automatically by adding a conveyor belt, according to user requirements. The SINCRO 315 EKO cable shredder is fully soundproofed and consists of the following components: - Granulator with three rotary and two fixed adjustable knives, as well as a screen perfectly matched to the granulator. - Control panel with an intuitive arrangement of control buttons. - Adjustable, easily accessible vibratory dry separator. - Two completely independent air circuits, which reduce maintenance needs and enhance the sorting process. Performance: - Up to 130 kg of input material per hour, depending on the type and size of the processed material and screen. - Combining it with a PMG pre-shredder increases throughput and reduces component wear, as ferrous parts are separated using a magnet installed on the conveyor, also reducing labor requirements. Gjdpfx Aey Sh Dbel Ujbu Processes unshredded cables: - Flexible copper cables up to Ø22–25 mm - Rigid copper cables up to Ø20–22 mm - Aluminum cables up to Ø20–25 mm Your benefits: - Best price/performance ratio - Quick return on investment - Machine retains high resale value - Compact, ideal solution for limited spaces - Environmentally friendly with low energy consumption and low noise - Capable of recycling a wide range of materials - Easy operation and maintenance

Condition: used, Year of construction: 2021, operating hours: 550 h, USED GUIDETTI SINCRO MILL 315 CABLE RECYCLING LINE – 2021 For sale: a used, compact cable recycling line manufactured by the renowned Italian company Guidetti Recycling Systems. The SINCRO MILL 315 is designed for processing mixed electrical cables, including both rigid and flexible copper or aluminum cables, without requiring preliminary sorting. Despite its compact design, the machine integrates the complete recycling process into a single system: * blade granulator, * zig-zag separator, * refining turbine, * dry density separation table. Rigid metal fractions, plugs, and connectors are separated directly by the zig-zag system, while plastics and thinner wires are further processed in the refining turbine. This solution improves separation quality and minimizes metal losses in the plastic fraction. The line produces clean copper or aluminum granulate and a separated plastic fraction. According to the manufacturer, the purity of the recovered materials can reach up to 99%, depending on the type and condition of the input cable. TECHNICAL DATA Manufacturer: Guidetti Recycling Systems Model: SINCRO 315 MILL Year of manufacture: 2021 Serial number: S315M210077 Operating hours: just over 550 hours Production capacity: approximately 130–180 kg/h, depending on the input material Installed power: 21 kW (according to the machine nameplate) Power supply: 400 V / 50 Hz / 3P+PE Full-load current: 37 A Dimensions: approximately 2316 × 1475 × 3100 mm Weight: 1,200 kg CE marked: Yes MAIN ADVANTAGES * complete cable recycling process integrated into one compact machine, * suitable for mixed rigid and flexible cables, * processing of copper and aluminum cables, * no preliminary cable sorting required, * high-quality separation of metals and plastics, * low operating hours, * compact footprint, * relatively low energy consumption, * easy operation and maintenance, Gbjdjz D I Sdopfx Al Usu * Italian manufacture. CONDITION The machine is used and has only slightly more than 500 operating hours. It is offered as a complete, integrated cable recycling unit.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: WJ-MKS315, overall weight: 213 kg, type of input current: three-phase, input voltage: 400 V, Special offer: WEIBERT steel circular saw MKS 315 incl. 2 roller conveyors For sale is a WEIBERT steel circular saw, model MKS 315, including 2 roller conveyors. The sale is part of a company liquidation and is offered at a special price. • Machine: WEIBERT steel circular saw MKS 315 • Accessories: 2 roller conveyors (1 piece 5200 mm, 1 piece 2200 mm) Gbodpfx Aez Rm U Ejl Uou • Shipping: By arrangement and for an additional charge An interesting opportunity for commercial and industrial companies looking to purchase a steel circular saw at an attractive price. If you are interested or have any questions, please do not hesitate to contact us.

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, overall weight: 11,000 kg, turning diameter max. 480 mm turning length max. 1.000 mm control Fanuc 15 TFB swing diameter max. over bed cover 520 mm turning speed range - main spindle 7 - 3000 rpm gear ratio 2 power capacity - main spindel 53 kW spindle nose 11 DIN 55026 chuck diameter 315 mm spindle bore 103 mm rapid traverse 10 m/min feed power 15 kN number of toolpositions 12 pos. driven statition 6 pos. Shank diameter 50 mm power capacity 5,4 kW Max. Speed 2.500 / 625 min/-1 max. Torque 25 / 100 Nm total power requirement ca. 50 kW weight of the machine ca. 11 t dimensions of the machine ca. 6 x 3,5 x 3,0 m The machine was in working order when taken out of service and put into storage; loading is possible. Gbjdpfsz Hmwkjx Al Uou Must move in short time

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Gbjdpfx Asy Tybnsl Ueu Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Cart length: 3200 mm Scoring saw Manual saw lifting and angle adjustment Blade: 315x30 mm Year of manufacture: 2026, NEW CE marking 640 kg 400 V Gbodpez Rnz Tsfx Al Uou

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, High speed Flow wrapping machine direct from closed Scotch Egg factory, commonly used for wrapping pies, Scotch Eggs and other bakery products. Rare to find a recent manufactured machine, this is the newest one we have seen. Gbjdpfx Alozmy Avo Usu

Condition: used, Year of construction: 2008, Langguth Box Labeler Gjdsz Ri Uujpfx Al Usbu

Condition: ready for operation (used), Year of construction: 1973, machine/vehicle number: 22123, functionality: fully functional, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Pressing force: 315 t Table width: 1,500 mm Table length: 2,500 mm Maximum working area: 883 mm MACHINE DETAILS Dimensions: 3.0 m x 1.6 m x 4.5 m Gsdpfxjz Izcwo Al Uebu EQUIPMENT Separate hydraulic unit Control panel

Year of construction: 2018, operating hours: 10 h, condition: good (used), functionality: fully functional, Subject: RZ125-315 pump with diffuser, impeller for water with blades Godpfx Aeztxvnol Ujbu - Pump operating parameters: Q = 80-150 m³/h H = 14.7-12.5 m - Material: cast iron, grade ŻL250 - Sealing: rope seal - With 3SIE160L-6 motor, 11 kW, 960 rpm, 400V 2. Quantity: 2 pcs.

Condition: good (used), functionality: fully functional, 315 mm and 250 mm chucks, with central adjustment and individual adjustment of the clamping jaws, Gedpezz Amtjfx Al Ujbu

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 184 kg, total length: 1,100 mm, total width: 400 mm, total height: 660 mm, power: 18.5 kW (25.15 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 42 A, type of input current: AC, type of cooling: water, rotational speed (max.): 1,500 rpm, protection type (IP code): IP55, KSB Pump ETABLOC ETB 125-100-315 GGsAV66D301854B PD2M Single-stage, volute casing pump in block design with a motor-integrated frequency converter. Godsz I R Rkepfx Al Uebu Year of manufacture 2021 (operated for only 1 year; a higher flow rate was required, which is why the pumps were replaced). Equipped with a PumpDrive 2/PumpDrive 2 Eco frequency converter. Self-cooled frequency converter with a modular design, enabling stepless speed control of asynchronous and synchronous reluctance motors via analog standard signals, fieldbus, or control unit. Four pumps are available for sale. Individual sale is possible. The price is per pump. Supply voltage: 400 V Power: 18.5 kW Current consumption: 42.0 A Pump speed: 1500 rpm Medium: Ethylene glycol-based antifreeze, inhibited, closed system, e.g., Antifrogen N or comparable products. Main pump connections: Suction nozzle DN 125 / PN16 Discharge nozzle DN 100 / PN16

Condition: good (used), Year of construction: 1973, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, Hydraulic 4-column press, manufacturer FIBRO, year of manufacture 1973, pressing force 315 t. Dimensions approx. 3.0 m × 1.6 m × 4.5 m. Table size: 2.5 m × 1.5 m. Separate hydraulic unit and control panel. Gjdpsx Nhakefx Al Uebu Maximum working area 883 mm (ram fully retracted). Powered, can be inspected on site. All information has been provided to the best of our knowledge and belief. Subject to change, errors, and prior sale.

Condition: good (used), Year of construction: 2008, BFR Wisskirchen PLS 315 3-axle flatbed trailer with access ramps Manufacturer: BFR Wisskirchen Designation: PLS315 New TÜV inspection certificate Type code: W09PLS3158BW47786 Tires: 205/65R17.5 127/125J Year of manufacture: 2008 Overall dimensions mm L 9300-9900 Overall dimensions mm W 2550 Overall dimensions mm H 3700 Unladen weight 4860 kg Gross vehicle weight 15000 kg Maximum Axle load in kg 5500 Access ramp: Gbsdpfewbn E Rex Al Uju Load capacity per ramp for two-axle vehicles with axle load distribution from 40% to 60% at axle spacing of 1.50 m: 4620 daN (kp) at axle spacing of 2.00 m: 4620 daN (kp) Information from the vehicle registration document: B. PERM. AXLE, EQUIPPED WITH REINFORCED TRAILER COUPLING TYPE SKL8, D-106K N, TESTING POINT M2939*96/53/EG (B) MIN-9250, (B) MAX-9850MM. WITH AXLE BPW NRZ 5506-1, 30.63.500.178. TURNTABLE JOST HE 1300-22. CONNECTION TO TOWING VEHICLE WITH TRAILER SOCKET DEVICE ABVS/EBS-ISO 7538-1. WITH RAMP ALTEC, TYPE AVS150 ORKE AT THE FRONT AND TYPE AVS170 ORKE AT THE REAR... PERM. BE GEM, TYPICAL WD DRIVES SECURED. You can find more shock absorbers – new and used – in our shop! International shipping costs upon request!

Condition: refurbished (used), functionality: fully functional, 1. Machine specifications: * Work table - Clamping surface 375 x 1600 mm - Number of clamping slots 4 - Table load 1000 kg * Adjustable travel ranges, machine-controlled - Table longitudinal movement (x) 1000 mm - Cross slide transverse movement (y) 270 mm - Overarm vertical movement (z) 505 mm * Milling spindle - Drive power 7.5 kW - Max. torque 1850 Nm - Tool holder, steep taper ISO 50 - Diameter in front bearing 100 mm - Max. milling head diameter 250 mm - Quill adjustment 90 mm - Swivel range, on both sides 45 degrees Gedpsz H Tuvofx Al Uebu * Speeds - Number 18 - Step ratio 1.25 - Range 45 ... 2240 min-1 * Feed rate - Number of feeds 18 - Step ratio 1.25 - Range, longitudinal and transverse 16 – 800 mm/min - Range, vertical 5 - 250 mm/min - Drive power 1.5 kW - Rapid traverse, longitudinal and transverse 3150 mm/min - Rapid traverse, vertical 1000 mm/min * Coolant system - Flow rate 10 l/min - Capacity 45 l * Connected load 8 kW * Machine weight (net) 3150 kg * Space requirement 2800 x 2420 x 2635 mm * Last inspection 03/2026 2. Technical condition The machine was only used in production until February 2011!!! Due to the overhaul, the machine meets the acceptance conditions for new machines. All guideways have been re-scraped, the gearbox has been overhauled, and the feed and rapid traverse couplings have been replaced. The milling spindle has been overhauled, and a new paint job has been applied. 3. Warranty: 3 months 4. Price: 19,000.00 € 5. Delivery terms: * Pricing: Prices are quoted net for delivery of the machine ex works, excluding VAT. We reserve the right to sell the machine in the interim. * Payment terms: 30% down payment upon order 70% upon delivery * Delivery date: ex warehouse

Condition: used, Year of construction: 2025, Used Machine Year of manufacture: 2025 Condition: like new, delivered in December 2025 Features and Technical Specifications: - Solid worktable made of heavily ribbed gray cast iron for maximum stability and durability - Sturdy base frame made of welded steel—guarantees high torsional rigidity and vibration-free operation - Precision format sliding carriage made of anodized aluminum—smoothly guided by a high-quality ball-contact system - Carbide guideways—for lasting precision and minimal maintenance - Swiveling cast iron saw unit with dual segment guide - Exact zero-point swivel for maximum cutting accuracy - Solid rip fence with round bar guide - Equipped with a sliding eccentric clamping device - Integrated miter cutting device on the sliding carriage—for fast and precise miter cuts - Scoring unit with belt drive - Format sliding table length: 2600 mm - Trimming length: 2600 mm - Format sliding table width: 360 mm - Table length: 940 mm - Table width: 560 mm - Cutting width with rip fence: 900 mm - Max. crosscut width to the left of the saw blade: 3200 mm - Saw blade tilt: 90–46° - Max. cutting height at 90°: 100 mm - Max. cutting height at 45°: 71 mm - Saw blade diameter: 315 mm - Speed: 4,000 rpm - Scoring blade diameter: 120 mm - Scoring blade speed: 9,000 rpm - Motor: 6 kW Gbjdpfjzk N Txjx Al Ueu Weight: approx. 560 kg

Condition: used, mileage: 45,890 km, power: 110 kW (149.56 HP), first registration: 10/2021, fuel type: diesel, overall weight: 3,200 kg, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Vehicle number (for inquiries): 92 MERCEDES-BENZ SPRINTER 315 HIGH + LONG Paint code: * 9775 Paint color Iridium silver MB 9775 Interior: * Fabric, black Equipment: * 212L Berlin * 9775 Paint color Iridium silver MB 9775 * AI1 Control code rear axle bevel gear 215 * AR2 Axle ratio I = 3.923 * BH1 Hold function * BH8 Control code hydraulic unit variant 7 * BK1 Control code wheel brake configuration 1 * C6L Multifunction steering wheel * C907 - * CL1 Steering wheel adjustable in inclination and height * D03 High roof * D50 Continuous partition * E07 Hill-start assist * E1D Digital radio (DAB) * E3M MBUX multimedia system with 7-inch touchscreen * ED4 Fleece battery 12 V 92 Ah * EE5 Ultracap - locking automatic transmission * ES0 Jump start contact * ES5 Charging package, instrument panel * EW6 Pre-installation for Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F64 Exterior mirrors, electrically foldable * F68 Exterior mirrors, heated and electrically adjustable * F907 - * FF5 Storage compartment above the windshield * FG8 Cupholders in the front * FJ4 Storage compartment under the cockpit * FKA Box van * FY7 Multi-button remote control * G43 9G-TRONIC * H20 Heat-insulating glass all around * HH9 Semi-automatic Tempmatic climate control system * HI1 Climate zone 1 (cold/comfort) Gbedpfez Rkvyex Al Uou * IC1 Model series C907/C910 Sprinter * IE0 Model series C907 VS30 Rwd * IG4 Standard * IG5 Basic * IH6 Head unit ECE/ROW * IK0 Complete vehicle * IL1 Domestic (Germany) * IL5 Left-hand drive * IL6 Metallic paint * IR4 Wheelbase 3665 mm (BM-defining code) * IT4 3.5-tonne vehicle * J10 Speedometer, km/h * J55 Seatbelt warning system for passenger seat * J58 Seatbelt warning system for driver's seat * J65 Outside temperature display * JA7 Blind spot assistant * JA8 Crosswind assist * JB7 Parking package with reversing camera * JH3 Communication module (LTE) for digital services * JI7 Start-up distance, maintenance interval 60,000 km * K13 Main tank 71 liters * KP7 Exhaust gas cleaning SCR generation 4 * L Left-hand drive * L94 Parking light deleted * LA2 Driving light assistant * LB5 3rd brake light * LE1 Adaptive brake light * LX5 Europe * M40 Generator 14V/200A * MJ8 ECO start/stop function * MT2 Emissions class Euro 6D-TEMP N1 * MU3 Engine OM654 DE 20 LA 110 kW (150 hp) * P2M Parking assist package * Q11 Longitudinal member reinforcement * Q67 Towing eye, rear * RF1 Tire manufacturer Continental (10) * RH2 Tires 235/65 R16 C * RM0 All-season tires * RS3 Steel wheels 6.5 J x 16 * RX5 Wheel manufacturer Maxion Wheels * S02 Driver's seat * S22 Armrest for driver's seat, ISO-fix (child seat attachment system) * S23 Passenger seat, double seat * SA5 Airbag, driver * SK2 Seat occupancy detection, driver's seat * T16 Sliding door, right * T77 Grab handle at the entrance to the cargo area sliding door on the partition * T86 Grab handle on the rear corner pillar, right * V94 Cable duct on the side wall * V95 Cable duct on the rear portal * VA3 Interior paneling, cargo area up to roof height, washable * VF7 Fabric Maturin, black * VK8 Floor covering, plastic * WB9 Control code factory * WK8 Control code factory * WM3 Control code factory * WM4 Control code factory * WZ7 Control code factory * X13 Weight variant 3,200 kg * X30 Vehicle registration certificate part 2 * X99 Manufacturer Mercedes-

Condition: used, Year of construction: 1957, Press force: 100 tons Gedszymurspfx Al Uebu Stroke: 30 - 160 mm Strokes per minute: 40/min Throat depth: 315 mm Passage between frame walls: 400 mm Shut height (max. stroke, adjustment up): 460 mm Table area: 910 x 680 mm Table opening: 400 mm Table height above floor: 800 mm Ram area: 630 x 400 mm

Condition: good (used), Year of construction: 2004, operating hours: 12,582 h, lifting height: 3,150 mm, fuel type: diesel, mast type: duplex, construction height: 2,150 mm, Linde H20D Duplo 315 Freelift / Sideshift / 4th Function, VW Diesel, 2004 A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex Nuland. Gsdszqyu Tspfx Al Usbu Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without any guarantees (see our general terms and conditions). You can schedule a viewing and/or test drive without any obligation. Please call beforehand to arrange an appointment, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: ready for operation (used), Year of construction: 2018, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2018. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It has a maximum die size of 2,250 × 750 mm and can accommodate a maximum die weight of 10,200 kg. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine. • Press capacity: 315 ton • Rated capacity: 3,150 kN • Rated capacity point: 12.7 mm above BDC • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm Godszcptwepfx Al Uobu • Maximum die size: 2,250 × 750 mm • Maximum die weight: 10,200 kg • Flywheel speed: 628.5 rpm • Operating speed: 15–40 spm • Maximum clutch engagements: 24 per min • Stopping time: 0.386 s • Safety distance: 618 mm • Cushion force: 3,450 daN @ 0.6 MPa • Counterbalance force: 102 kN @ 6 bar • Frame type: Double upright, double-crank • Clutch/brake system: Pneumatic • Lubrication system: Centralized automatic • Slide guiding: Precision guided • Drawing cushion: Integrated • Counterbalance cylinders: Yes • Safety system: Integrated • Operator protection: Yes • Automation ready: Yes • Drawing cushion: Integrated (Included) • Counterbalance cylinders: Yes (Included) • Safety system: Integrated (Included) • Operator protection: Yes (Included) • Automation ready: Yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: ready for operation (used), Year of construction: 2013, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2013. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It is designed for high-precision stamping operations with a robust double-upright frame and integrated drawing cushion. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine. • Main technical data: • Press capacity: 315 Ton • Rated press force: 3,150 kN • Rated capacity point: 12.7 mm above Bottom Dead Center (BDC) • Normal crankshaft stop position: Top Dead Center (TDC) • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Slide speed: 15–40 strokes/min Gbedpfx Alozcppxo Usu • Maximum flywheel speed: 628.5 rpm • Maximum clutch engagements: 24 engagements/min • Stopping time: 0.386 s • Safety distance: 618 mm • Die and working area: • Maximum die size: 2,250 × 750 mm • Maximum die weight on slide: 10,200 kg • Machine structure: • Frame design: Double upright (straight-side) frame • Drive system: Double connecting rod (double pitman) • Slide guidance: Guided slide • Motion type: Mechanical crank press • Slide movement: Vertical reciprocating motion • Main axis movement: Rotary crankshaft drive • Ram adjustment: Motorized slide adjustment • Cushion system: • Type: Integrated drawing cushion • Maximum cushion force: 3,450 daN at 0.6 MPa • Systems and safety: • Counterbalance cylinders: Yes • Counterbalance force: 102 kN at 6 bar • Clutch & brake system: Pneumatic • Lubrication system: Centralized automatic lubrication • Safety system: Integrated • Operator protection: Included • Automation ready: Yes • Performance and safety notes: • High-rigidity double-upright frame construction • Double-pitman drive for improved slide parallelism and load distribution • Pneumatic clutch-brake for reliable operation and fast stopping • Designed for integration with automatic feeding and transfer systems • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) (Included) • Clutch & brake system: pneumatic (Included) • Lubrication system: centralized automatic lubrication (Included) • Drawing cushion: integrated (Included) • Safety system: integrated (Included) • Operator protection: yes (Included) • Automation ready: yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: used, Year of construction: 1983, Press force: 315 t Stroke: 700 mm Frame width: 1750 mm Shut height (stroke up): 1200 mm Table area: 1600 x 1500 mm Cushion force in table: 125 t Gjdozyn Rnepfx Al Usbu Cushion stroke in table: 200 mm Cushion area in table: 1200 x 1500 mm Table height above floor: 750 mm Ram area: 1640 x 1500 mm

Condition: used, Parallel Lathe SCULFORT MAXICAP type 315-3000 R Between points: 3000 mm Maxi Ø on bench: Ø 635 mm Maxi Ø over saddle: Ø 470 mm Maxi diameter in brocken bed: Ø 1000 mm x Width 200 mm Spindle motor: 13 CV Spindle diameter: Ø 71 mm Rotation: from 20 to 1300 RPM Square turret GOODSHAPE Gbedpez Iz N Rsfx Al Usu 3-jaws chuck Ø 380 mm Threadings: Metric + Whitworth Tailstock: CM5 Feeds: longitudinal + transversal auto advances Equipped with: 1 lubricant pump + 1 face plate Ø 1000 mm Equipped with: 2 fixed steadies: Ø 380 mm + Ø 1000 mm Voltage: 380 V Dimensions (L x W x H): 5200 x 1600 x 1700 mm Weight: approx 5 T

Condition: new, Year of construction: 2024, Quantity: 3 units – price per unit Gbjdpsz A U T Sofx Al Uju Year of manufacture: 2024 Reach: 3143 mm Load capacity: 315 kg Axes: 4 Weight: 1330 kg