Used Pressure Vessels for sale (14,969)

Condition: good (used), Used stainless steel transport container / pressure vessel Item number: 10543 Quantity: 13 Last use: Food Volume: 950L Type: Upright on four feet with forklift tunnel Material (wetted parts): 1.4301 / AISI304 Design: Single-walled Dome cover Ø 400mm Tedpfx Agegx U Rgehof Operating pressure according to type plate: 0.7 bar Tank dimensions: Outer diameter: 1000mm total height: 1800mm Total width: 1000x1000mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Equipment: Type plate: Yes Outlet diameter: DN 50 Outlet valve: Disc tap

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Type: 9601 Volume: 200L Operating Pressure: 3 bar Todetrdyrjpfx Aghof Electrical Data: 380V; 0.75kW; 2.0A

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. Tsdpfxofz Dvve Aghjf The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Tjdpfx Aefz Ax Soghjf • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar. Tsdpfx Agjflpmqjhef

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Tedpfx Agefzrapohjf The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Todpfefz A D Njx Aghof • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, Used Schenk model ZHF-S70-Z-C3 stainless steel pressure leaf filter. Unit measures approximately 2400mm straight side X 1350mm diameter. Has (60) 1200mm diameter horizontal filter/scavenge elements on 30mm spacing. Total approximately 70 square meter filtration area with approximately 1850 litre cake capacity. Filter elements bottom driven by a Hydrokraft model PVG 130-ES/11 hydraulic drive with a 37 kW, 415 volt, 1400 rpm, 3 phase, 50 HZ motor. Unit has an approximately 200mm slurry outlet. Welded dished bottom and clamped dished top head. Approximately 4300 litre capacity rated 9 bar design pressure at 20°C. Material of construction 321/304 stainless steel. Mounted on (3) legs. Also includes a 3000 litre 304 stainless steel Kieselguhr discharge tank rated 0.5 bar at 20°C. And a Kieselguhr Dosing tank with a 2-tier 2-blade pitched paddle type agitator driven by a 1.1 kW motor. Dosing tank includes feed pump driven by a 1.4/1.8 kW, 415 volt, 1410/2870 rpm, 3 phase variable speed motor. Tsdpfxoxyxk Ej Aghjf

Condition: good (used), mileage: 472,700 km, power: 234 kW (318.15 HP), first registration: 01/1990, fuel type: diesel, color: yellow, axle configuration: 4x2, fuel: diesel, wheelbase: 4,400 mm, driver cabin: day cab, gearing type: mechanical, suspension: steel, loading space volume: 12 m³, Year of construction: 1990, = Additional options and accessories = - PTO (Power Take-Off) = Further information = Todpfsxzr N Dsx Aghef Applications: cleaning, land drainage, drainage and recycling Suspension: leaf spring Front axle: Max. axle load: 8,000 kg; Steered; Tyre tread left: 80%; Tyre tread right: 80% Rear axle: Twin tyres; Max. axle load: 13,000 kg; Tyre tread left inner: 80%; Tyre tread left outer: 80%; Tyre tread right inner: 80%; Tyre tread right outer: 80% Technical condition: good Visual condition: average

Condition: used, tank capacity: 32,000 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Cylinder manhole diameter 500 mm (most of the manhole cover bolts are missing); on one tank, one foot, and on the other, two feet are dented into the bottom head (on this tank, one nozzle is also dented into the top head and the heating coil is indented at one spot); the dented feet must be repaired on-site before reinstallation of the tanks; external insulation rings made of Fe (partially slightly damaged); one tank has a flanged reduction at the outlet (inner pipe diameter approx. 55 mm); see photos Internal diameter: 2,400 mm Overall height: 9,050 mm Heating/cooling: available Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Support type: feet Location: Bremen Tedpfexqb E Hjx Aghjf Technical documentation: drawing, acceptance certificate Nameplate: Vacuum: 1.0 bar Volume: 32,000 liters Double jacket volume: 80.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 6,970 mm Previous use: Chemicals TANK Max. operating temperature / °C: 200 °C Number of feet: 4 pieces HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole / dome: in cylinder, in upper head (DN 500) Outlet (alternative entry): 100 mm Note: slight residues, manhole covers clad MATERIAL SPECIFICATIONS Temperature control system material: V4A 1.4571 (AISI316) Feet material: steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm

Year of construction: 2018, condition: used, 2018 | Kärcher HD6/15C Pressure washer 150bar/230V | Used Small Equipment ❓ Want the expert inspection report with 1 checked points, 8 extra photos and a full video? Contact us! Todpfx Agsx Agayjhef 💡 Listed in a Bid-to-Earn auction: ✔ Earn rewards while bidding – see your reward for each bid ✔ Get your full bid amount back if outbid ✔ Rewards are credited when the reserve is met ✔ Highest bidder wins when the auction ends 💡 Why choose us? ✔ Fully inspected machines ✔ Delivered to your jobsite – :articulated_lorry: estimate your shipping cost with our calculator ✔ Money-Back Guarantee ✔ Secure payment methods incl. pay-at-delivery option ✔ Data-driven market pricing 📍 Location: Estonia, Tallinn This machine is available on the Equippo Marketplace as part of a special BID TO EARN AUCTION format.

Condition: excellent (used), Pneumatic pressure switch Tjdeb A Sv Sepfx Aghef -Type: MDR2/11 -Number: 7x pneumatic pressure switches available -Price: per piece -Weight: 0.3 kg

Condition: excellent (used), Year of construction: 1990, High pressure fan, dust extraction fan, pressure fan, vacuum fan, high pressure fan VRU 15-100-30H2.8 Condition: Used Drive motor: 3.5 kW p1:1.15kg/m3 Speed: 2880 rpm Volume output: 0.315m³/s Pressure point:62 mbar Connection input: Ø 100mm Connection output: Ø 100mm Dimensions: 1000x600x700 mm Todsvlz Arepfx Aghjf Mass: 180 kg Location: from stock 54634 Bitburg - immediately available -

Condition: used, Reportedly unused Eurovent Calmic model 45-S-19 hastelloy C22 contact parts pressure leaf filter. Has (19) 450 mm (18") diameter horizontal shallow plates. 2.6 square meter (28 square foot) filtration area and 65 litre (2.3 cubic foot) cake space. Has stainless steel vertical tank with clamped dished top head. Internal rated full vacuum/6 bar (87 psi) design pressure at -29 to 175°C design temperature. Mounted on (3) legs on forkliftable base. Tsdexw Tcdopfx Aghjf

Condition: used, NC High-Pressure Vice, High-Pressure Machine Vice RÖHM NC Precision Machine Vice Type: RKD-125 ID No.: 180467 / D2950 Year of manufacture: approx. 2010 Jaw width, step jaws: 125 mm Jaw height, step jaws: 40 mm Jaw width, attachment jaws: 135 mm Jaw height, attachment jaws: 49 mm Tsdpfsxxmf Ujx Aghef Machine vice base width: 126 mm Opening width, max.: 141 mm per side (only with step jaws, without attachment jaws) Clamping force: 4 tons Guideway height: 105 mm - High-pressure vice with mechanical force amplifier - Clamping force adjustable in 4 stages from 1 to 4 tons - 2 clamping functions: single clamping with dummy and double clamping - Various clamping ranges via 3 guide grooves in each base jaw - Step jaws (reversible) - Stable base body, ground on all sides - Can be mounted horizontally, vertically and laterally - Center jaw dimensions (L x W x H): 125 x 40 x 40 mm - Attachment jaw dimensions (L x W x H): 135 x 20 x 49 mm Dimensions (L x W x H): 680 x 135 x 155 mm Weight: 56 kg Good condition

Condition: used, tank capacity: 1,350 l, GENERAL Design: suspended Remarks: Various technical documents available; the tank was previously suspended by the former operator in a ring with load cells, which was embedded in the floor (one ring per tank is included in the scope of delivery; see photos) Speed: 412 rpm External diameter: 1,250 mm Todpfx Agexxiccjhjf Internal diameter: 1,000 mm Total height: 2,650 mm Heating/Cooling: available Insulation: available Power: 0.75 kW Max. permissible operating temperature: 140 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: Magnetic stirrer Location: Bremen Technical documentation: Drawing Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,350 litres Jacket volume: 80.0 litres Product-contact material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 1,460 mm Previous application: Pharmaceutical TANK Max. operating temperature (tank) / °C: 130 °C HEATING/COOLING JACKET Max. permissible operating underpressure (jacket/pipe zone) / bar: 1.0 bar Base heating: Half-pipe coil INSULATION Insulation material: Mineral wool EQUIPMENT Manway/Dome: on top head Outlet: available Outlet (alternative): 50 mm MATERIAL PROPERTIES Temperature control system material: V2A 1.4541 (AISI 304) AGITATOR Agitator manufacturer: MAVAG AG Voltage: 230/400 Volt Agitator arrangement: Bottom-mounted TECHNICAL DATA / DIMENSIONS Top head wall thickness: 4.5 mm

Condition: used, Year of construction: 2012, functionality: fully functional, Lot consists of: (1) Low pressure die casting machine, including sand blaster, crucible, and pallet of spare parts. Excludes sand bags. Technical Details: Tedpfxsxz Dnfj Aghjf Induction process; 165 kW; Siemens control; capacity 400 kg/h; 1,000 kg

Condition: good (used), Differential pressure indicator, transmitter, monitor, senso, differential pressure indicator, differential pressure switch, pressure switch, volumetric flow controller, differential pressure controller, pressure reducing valve -Manufacturer: Samson, differential pressure regulator 2-6 bar -Type: 2440 Rg5 1/2 PN25 -Control valve: Samson Rg5 -Number: 1x controller available -Price per piece -Dimensions: 270/95/H90 mm Tedpeiq Th Sjfx Aghef -Weight: 1.2 kg/pc.

Year of construction: 2011, condition: like new (used), Offer on request 2 pieces available Motor power: 3 KW Voltage: 400 V Maximum capacity: 40 LM Pressure: 20 Bar Tank capacity: 980 Lt. Weight: 900 kg with cooling system EUROCHILLER GC-B A 009 SP - year 2011 400 V 50 HZ Tsdpfedtyx Eox Aghef 6 Kw 9 A 24 Vaux 500 VI 54 IP R407c gas Air condenser: 25°C Water process: 15°C Weight: 4 kg

Condition: used, Unused Elektror stainless steel radial ventilator/fan directly drive by Hoyer 55kW/400V/2975rpm el. motor. Air output 18 000 m3/hour. Max. static pressure 7000 Pa. Max. temperature 55 deg. C. New 2017. 6 identical pieces available. Tedpfsxyxm Hox Aghjf Specifications: Motor Power: 73.8 hp Airflow Capacity: 10,594.4 ft³/min. Total Pressure: 1 PSI

Condition: like new (used), 4100 litres. New, 2 units Todoxz Hxgspfx Aghjf

Condition: good (used), DC Norris cooking system, comprises of 300 litre and 500 litre vessels with independent control panels, a tote bin hoist and a transfer pump. Machinery in nice ex factory condition and being removed from the factory in Europe at the end of January 2025. Tsdpfjvuh Rhsx Aghef

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 46/2020 1666344-4, Multistage vertical centrifugal pump for pressure boosting and water treatment Technical data as per nameplate image Tedpfoxz Sb Hex Aghof The unit is still in its original packaging, including manuals.

Year of construction: 2025, condition: as good as new (ex-display), From our showroom in Stuttgart we sell alternately our demonstration units. The equipment was used for demonstration purposes. Subject to prior sale. Offer plus transport costs. All data without guarantee. We offer maintenance and service to Glogar cleaning equipment. Tsdogrm Egjpfx Aghsf HD washstand - HD brush washstand Washstand has a controllable 60 bar HD pump with which the cleaning takes place in a closed working chamber. The cleaning is carried out by means of aqueous degreaser and at approx. 45°C. Viewing window incl. lighting Medium filtration via candle filter Comfort operation by foot switch inclusive turntable Technical data: Working surface: 800 x 600 mm useful height: 400 mm load capacity: 50 kg Operating pressure: adjustable up to max. 60 bar Pump capacity: 14 lt/min Washing temperature: adjustable up to max. 45°C tank capacity: 100 lt heating capacity: 3.000 W Power, total: 7,0 kW voltage: 400 V ac 1 P+N+PE; frequency: 50 Hz Machine weight: approx. 140 kg Overall dimensions with lid open: 1,100 x 910 x 2,020 mm

Condition: used, Used vertical stainless steel AISI 316L aseptic pressure storage tank with a total capacity of 830 litres by Schwarte-Milfor Sp. z o. o. (Poland), type Mieszalnik procesowy. The tank has a working volume of 700 litres and is designed to operate at pressures ranging from -1 to 4 bar and temperatures up to 150 °C. The heating and cooling jacket, made of stainless steel AISI 304, has a capacity of 152 litres and is designed to operate at pressures ranging from -1 to 3 bar and temperatures up to 150 °C. The jacket is insulated with mineral wool and clad with AISI 304 stainless steel sheet. Internal dimensions: diameter 850 mm, length of straight wall section 1,200 mm. The tank has a welded dished top fitted with an inspection manway with an internal diameter of 450 mm and nine stub pipes with mounted accessories. The tank has a welded dished bottom head fitted with a central outlet with a NovAseptic valve type NA and two stub pipes with mounted accessories. The machine is mounted on three legs equipped with load cells with a display. The equipment includes full technical documentation from the manufacturer and UDT in Polish. Specifications: Capacity: 830 L Diameter: 850 mm Height: 1,200 mm Type Of Heads: Dished Vertical/Horizontal: Vertical Type of stainless: Stainless Steel AISI 316L and AISI 304 for The Jacket Legs/Lugs: 3 legs equipped with tensions cells Todoxyxm Tjpfx Aghsf