Used Air Pressure for sale (36,127)

Condition: good (used), Year of construction: 2000, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 20FT ISO CRYOGENIC TANK CONTAINER Manufacturer: Air Liquide Italia S.r.l. ISO Code 6346: 22KW IMO Portable Tank IMO Type 7 Transport Instructions: T75 ADR RID Tank Code: R11.7BN ISO Code 6346: 22KW Max. working pressure: 8 bar Hydr. test pressure: 11.7 bar Design Temperature: min -196 °C Material (Inner & Outer Vessel): High-grade Stainless Steel (X5CrNiN1810 UNI 7500) Insulation: Vacuum Double Envelope (Excellent current vacuum: 0.052 mbar) Safety Valves: 2x Herose Relief Valves (Set at 8 Bar) (p. 1) Vaporizers: Included & complete with piping Last Inspection: June 9, 2026 (5-Year Periodic Inspection by Bureau Veritas) Next Inspection Due: 12-2028 CSC Validity: Until 12-2028 (p. 1) Approval/Regulations: IMDG, ADR, RID, CSC, US DOT (p. 1) Lajdozd Sauopfx Ancog = Further Information = Year of Construction: July 2000 Model Year: 2000 Usable Material: Gas Unladen Weight: 8,300 kg Payload: 25,700 kg GVW: 34,000 kg Technical Condition: good Optical Condition: good Please contact Arne Honingh for further information.

Condition: like new (used), Year of construction: 2007, power: 5.5 kW (7.48 HP), For sale is a Solid Air piston compressor (2-cylinder version, 5.5 kW, 2007) in excellent, technically flawless condition – including a matching 500 L compressed air tank (2007). A special feature of this compressor: it was used exclusively as an emergency unit, so it has hardly been run. Accordingly, it has very few operating hours and is in almost new condition, both technically and visually. The compressor has always been regularly serviced, is fully functional, has been inspected, and is ready for immediate use. The included 500 L compressed air tank ensures a consistent, pressure-stable air supply and, by reducing the number of switching cycles, also protects the compressor. Technical data: - Type: Piston compressor, 2-cylinder - Motor power: 5.5 kW - Compression pressure: 10 bar - Displacement flow rate: 916 l/min - Operating speed: 850 min⁻¹ - Compressed air tank: 500 L (included) - Operating hours: very low (used only as an emergency unit) With our comprehensive all-inclusive package, we will personally take care of the complete service for you – from delivery to the commissioning of your new compressor. This includes unloading, setting up, and aligning the system. Our experienced service technicians will then professionally commission the system, carry out all necessary functional tests, and ensure that your Solid Air compressor, together with the 500 L tank, runs reliably and efficiently. In addition, we offer individual training for your employees so that you can use the system optimally from the start. We will also continue to be available to you after installation – whether for maintenance, technical questions, or future expansions. Ljdpfx Anszlhp Usceag With our comprehensive all-inclusive package, you don't have to worry about anything – we will ensure that everything runs smoothly and that you can focus entirely on your production. Our service promise: Quality, competence, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in compressed air and compressor systems, as well as other machines. We place great value on personal support and will be happy to assist you at any time, even after the purchase. In addition, you have the opportunity to inspect and test the system at any time in our workshop. You are cordially invited to come and see the condition and operation of the system for yourself. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: excellent (used), Compressor type: Dry air Revolutions per minute 750 Outlet pressure: 42 bar Volume spawned: Number of cylinder lines 2/4 stages Supplied air: 7.73m³ / min; 464m³ / h Lodjwcgc Rjpfx Ancoag Motor power: 90kW

Condition: used, Year of construction: 1986, Technical details: weight: 7,5 kg number of strokes: 2000 Hub / Min Torque: 15 kp dimensions L x W x H: 170x160x130 mm air pressure clamping unit application area operation of vise clamping consists: air pressure motor, impuls mechanism and a control mechanism air pressure supply necessary averaged operation pressure 0,4- 0,6 MPa air pressure consumption 1,1m³/min with 0,5 MPa tightening force: 80kN accessories: copy of documentation available Lajdeu Nkk Ropfx Anceg 13 pcs available i.D. *

Condition: excellent (used), Year of construction: 1996, Compair Cyclon 6000N screw compressor 75kw power: 75 Kw air transport : 12.9 /min :774 m3/h pressure: 8 bars voltage: 400v 50Hz 3 phase Construction of year: 1996 hours:51000h Lsdoh Unhnepfx Anceag weight: 1800 kg Size: length: 2100mm width: 1700mm Height: 1510mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 2006, FIAC CRS20 Soundproof Screw Compressor – Year 2006 Complete with a 500-litre air receiver and FIAC DS20/AC refrigerated air dryer, ideal for ensuring a continuous supply of compressed air with low noise levels. Lajdozq Amrspfx Ancsg Technical Specifications Air delivery (F.A.D.): 1,860 l/min Maximum pressure: 10 bar Power consumption: 17.6 kW Motor power: 20 HP Air receiver capacity: 500 litres Weight: 461 kg Availability: Delivery scheduled for September 2026.

Condition: used, operating hours: 638 h, High-pressure air/nitrogen compressor for sale – EFCO Maschinenbau GmbH BOE 100/200 booster. The compressor is used, fully operational. Currently connected – inspection and testing on site are possible. Designed for compressing air or nitrogen up to a pressure of 200 bar. Suitable for pressure testing, industrial processes, valve testing systems, and other high-pressure applications. Specifications: Model: EFCO BOE 100/200 Maximum working pressure: 200 bar Tank capacity: 2 x 50 l (100 l total) Electric drive – 400 VAC Suitable for air and nitrogen compression Automatic shutdown upon reaching maximum pressure Automatic start when pressure drops Simple and convenient operation Lodpfx Ansy R Nnrsceag Filling time from 0 to 200 bar (2900 psi): approx. 2.5 hours Operating hours: 638 h German-made, professional, industrial-grade equipment. If you have further questions, we will be happy to answer them.

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Lasdpjzinzlsfx Ancjg Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Good condition

Year of construction: 2020, condition: excellent (used), Weber Legi-Air 4050E CC (Gen.3) – automatic print and apply labeling system with support frame For sale: Weber Legi-Air 4050E CC (Gen.3) – a professional industrial print and apply labeling system designed for automatic product labeling in production lines. Manufactured by Weber Marking Systems, this unit is designed for continuous operation in demanding industrial environments. The machine provides highly precise and efficient label printing and application, making it ideal for packaging and product identification processes. Technical data: Manufacturer: Weber Marking Systems GmbH Model: Legi-Air 4050E CC (Gen.3) Year of manufacture: 2020 Print resolution: 203 / 300 / 600 dpi Maximum print speed: up to 400 mm/s Capacity: up to 240 labels/min Application accuracy: ±0.8 mm Minimum label size: 10 x 5 mm Maximum label size: 160 x 350 mm Maximum applicator arm reach: 400 mm Power supply: 100–240 V AC / 50–60 Hz Power consumption: 700 W Operating pressure: 6 bar Air consumption: 0.1 – 3 l / cycle Additional information: Ljdpjy Ickbefx Anceag sturdy support frame included, height adjustment on the legs and on the support column, maximum labeling head height on the support frame: approx. 140 cm from the floor, can operate in four directions: left / right / up / down. TAG: industrial labeler, labeling system, label printer, print and apply system, Weber Legi-Air, Weber Marking Systems, Avery Dennison labeler, Zebra label printer, Sato labeling machine, Novexx labeling system, Videojet label applicator, Domino print and apply, automatic label applicator, carton labeling machine, production line labeler, industrial labeling machine, packaging label applicator, automatic print and apply, product labeling system, industrial label applicator

Condition: used, Used hydrogen plant designed to produce high purity hydrogen and carbon monoxide from natural gas. Built by Air Liquide and first operated in 2015, shut down in August 2024. Laedpoy Ryrbofx Ancjg Output capacity as follows: - Hydrogen 60000 Nm3/hour with 99.99% purity. - Carbon monoxide 14500 Nm3/hour with approximately 99% purity. (Actual purity depends on volume of nitrogen in the natural gas feedstock.) - Superheated 40 bar steam by-product. The HyCO plant includes the following (5) main sections: - Syngas generation / steam reforming and steam generation - Gas cooling - CO2 removal unit / CO2 scrubbing - Gas drying and cryogenic dismantling - Pressure swing adsorption (PSA) Also included: sub-systems for provision of operating resources, flare system, process control and safety shutdown system.

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, COMPLETE PACKAGE: Mobile, transportable compressed air supply station – the entire system is installed in a red steel container (10 ft) and can be transported as a single unit using a crane. Simply connect the three-phase power supply and compressed air line – and it’s ready to go. The interior features a HIGH-QUALITY INDUSTRIAL SYSTEM manufactured in 2025: - SCC screw compressor with frequency inverter (speed-controlled, energy-efficient) - 2000-liter pressure vessel VIG (stands upright, protrudes through the container roof with a weather protection cover) - Complete control system with touch panel and emergency stop button on the outside - Acoustic sound insulation (black foam mats inside) - Permanently installed electric heater in the container (frost protection for year-round operation) - Hose material and compressed air connections for consumers Ljdpjzav Ddofx Ancoag - Crane lifting points on the container roof - Control panel with touch display, emergency stop, status LEDs Originally from the shipyard operations of Strela Shiprepair GmbH. System freshly painted, clean, and ready for use. Assumption of the maintenance contract with Schulze is possible. TECHNICAL DATA: SCREW COMPRESSOR: - Manufacturer: SCC Air Compressors - Control: SCC frequency inverter (speed-controlled) - Type: Screw compressor, stationary in the container - Year of manufacture: 2025, commissioning date: 23.05.2025 - Operating time: approx. 1 year in shipyard operations PRESSURE VESSEL: - Manufacturer: VIG GmbH, Kreuztal - Volume: 2,000 liters - Max. pressure: 11 bar - Test pressure: 15.73 bar - Temperature: -10°C to +50°C - Standard: AD 2000, test mark 1003 - Factory No.: 124585, year of manufacture 2025 CONTAINER: - 10-foot steel container, soundproofed, painted red - External dimensions: approx. 2,991 x 2,438 x 2,591 mm - Crane lifting points on the roof (photo attached showing the shipyard crane) - Three-phase power connection 400 V CEE IDEAL FOR: - Shipyards and shipbuilding companies (mobile compressed air supply for ships) - Sandblasting service providers (mobile complete solution) - Industrial companies with changing locations - Automotive/body shops with an external location - Construction companies, scaffolding companies PICKUP: Loading with the shipyard crane directly on-site (container has lifting points on the roof). Transport by low-bed trailer via a forwarding agency. Inspection appointments are available at any time – we will then show you the complete documentation and demonstrate the system in operation.

Condition: new, Year of construction: 2025, Viber-Air Power: 7.5 kW / 7.5 HP Motor speed: 3000 rpm Tank capacity: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Air flow: 800 l/min. Drive type: direct drive Outlet diameter: G 3/4 Dehumidifier: TR-10HP Cooling: Air Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length/width/height): 1900/800/1660 mm Ljdpfx Asxdbvrjncoag Weight: 390 kg Suction capacity: 950 l/min Discharge capacity: 800 l/min

Condition: new, ABEL air feed fitting on the pressure side for piston diaphragm high-pressure pumps. Lsdpfxeiyp Tze Ancoag NEW ! We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice.

Condition: used, Hydraulic power unit with piston pump PUMPEN WART in Erkrath High-pressure pump, high-pressure hydraulic unit (in need of repair) Type SJK2C Serial No. 48315, Order No. 230045 Lajdsxcimpepfx Ancjg Year of manufacture: approx. 1975 Pressure capacity: 1000 bar (according to nameplate) Flow rate: 25 liters/min (according to nameplate) Flow rate: 25 liters/min (at 0 bar) Flow rate: approx. 3 liters/min (at 1000 bar) Piston pump with 2 pistons, 50 mm stroke 280 double strokes per minute Tank capacity: approx. 100 liters Motor power: approx. 11 kW Power connection: 380 volts, 50 Hz Required space (L x W x H): 1000 x 600 x 1200 mm Weight: approx. 350 kg No proper function during test run, although the unit was last used on a test bench. Possible issues due to extended downtime and storage period. Sale without functional guarantee, without technical demonstration, at a special price.

Condition: new, Year of construction: 2026, Viber-Air INV11-500 Screw Compressor with Dryer and Inverter Power: 11 kW / 7.5 HP Motor Speed: 3000 rpm Tank: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Laodpfx Aoxdbubjnceg Air flow: 1500 l/min Drive type: direct drive Outlet diameter: G 1 Dehumidifier: TR-20HP Cooling: oil Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length / width / height): 1900 / 750 / 1030 mm Weight: 500 kg Suction capacity: 1800 l/min Discharge capacity: 1500 l/min

Condition: used, Year of construction: 2024, operating hours: 698 h, functionality: fully functional, machine/vehicle number: APP889037, overall weight: 3,500 kg, total length: 5,760 mm, total width: 1,987 mm, total height: 1,973 mm, motor manufacturer: Cummins B6,7, power: 231 kW (314.07 HP), fuel type: diesel, volume flow: 19 m³/h, pressure (max.): 25 bar, Equipment: type plate available, We are offering this used Atlas Copco X-Air+ 750-25 reciprocating compressor, manufactured in 2024, for sale. Model: X-AIR+ 750-25 Max. operating pressure: 25 bar Speed: 1920 rpm Engine power: 231 kW Permissible total weight: 3500 kg Lsdpfxoz A Dauj Ancoag Support load: 70 kg Axle load, axle 1: 1765 kg Axle load, axle 2: 1665 kg Serial number: APP889037 Date of manufacture: 05/2024 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2024, Refrigerant dryer, OMEGA AIR, RDP 75 – used: Price ex works: €750.00 (net)! Manufacturer: OMEGA AIR Type: RDP 75 Year of manufacture: 2024 Nominal flow rate: 75 m³/h Max. operating pressure: 16 bar Ambient temperature during operation: 1 °C to 45 °C Max. air inlet temperature: 55 °C Ph~V-Hz: 1~230-50/230-60 | 0.40 kW Protection class: IP20 Contains fluorinated greenhouse gases Refrigerant: R513a | 0.39 kg | CO₂ equivalent 0.22 t Operating hours: unknown Laodpfxszbydwe Ancog Condition: good Available: from approximately August 2026

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. Laedpfx Aoz Dhrqjnceg After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Year of construction: 2001, condition: used, Compressor, compressed air unit, piston compressor, quiet running compressor, compressor for dentistry, quiet running compressor -Manufacturer: Jun-Air, quiet compressor type OF301 Ledpfxsu Huvfs Ancoag -Motor power: 250 W -max. pressure: 8 bar -Number: 2x compressor available -Price: per piece -Dimensions: 220/160/H230 mm -Weight: 9.2 kg/piece

Condition: used, This listing is for a Jun-Air OF302 Application Oil-free compressor 25 liter pressure vessel mounted on frames incl. 5 micron filter regulator with auto-emptied water several withdrawal options for compressed air adjustable rubber mounts flexible applications can also be used for retrofitting existing systems Ledpfx Anjxzg Rvjcoag horizontal mounting manner possible ideal for installation in OEM applications 2-frequency driving motor Technical Data Suction - 108 l / min Delivery performance - 38 l / min at 8 bar Volume - 65 dB (A) Cylinder per compressor - 2 Pressure container volume - 25 l Permissible ambient temperature - + 1 ° C to + 40 ° C Supply voltage - 230 V, 50 Hz Engine Power - 0.44 kW Current consumption - 4.1A Thermal protection - Integrated Duty - 100% Weight - 28 kg Dimensions (LxWxH) - 380 x 380 x 610 mm

Condition: good (used), Year of construction: 1970, Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, compressor tank, compressed air reservoir, compressed air storage tank, compressor tank -Manufacturer: Elektra-Beckum, compressed air tanks, compressed air storage -Contents: 1000 L Laodpfx Anszyt Avscsg -Operating pressure: 11 bar -Dimensions: 900/1000/H2350 mm -Weight: 322 kg

Condition: good (used), Code: 0386 Brand: BOTTARINI AIR KRONE - ITALY Model: KS 22 - CE Standard Silenced screw air-compressor with tank and dryer for craft and industry - CE Standard Features: Palletised design, this means that it can be placed anywhere using a simple transpallet. No bolting down is required. Panel-enclosed design that allows for easy access from all sides for routine maintenance Clearly visible and functional control panel features a pressure gauge, air pressure, running time counter, a digital temperature regulator, and a timer. Light on/off button and fault indicator lights Technical data: Lsdpfsy Spkiex Ancsag Motor power 20 Hp 10 Bar 2 m³/min Air delivery 70 CFM Vertical tank 500 liters Dryer Overall dimensions Compressor mm 700 x 700 x 1000 h - 210 kg Overall dimensions Dryer mm 500 x 500 x 600 h - Kg 50

Condition: excellent (used), Year of construction: 2021, Used clean air dust collector with frequency converter Year of manufacture: 2021 Max. volume flow up to 10,000 m³/h at the fan Approx. 73 m² filter area Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content of 0.1 mg/m³ safely maintained (wood dust) Models with type-tested rotary valve airlock (FSA) Tested backflow flap Integrated automatic extinguishing system 350+ P Suction nozzle 355 mm Motor rated power 15.0 kW / 3-phase Voltage 400 V / 50 Hz Max. volume flow 10,000 m³/h Rated volume flow* 7,127 m³/h Negative pressure at Vnenn. 3,347 Pa Filter area 73 m² Chip collection volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2,361 Laedpfszizz Ssx Ancjg Weight 1,074 kg Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Well-maintained firstAIR FAS37 rotary screw air compressor (Eucomp Germany airend, ALMiG Kompressoren GmbH brand). Technical specifications: Type: FAS37 (rotary screw compressor) Year of manufacture: 2020 (01/2020) Motor power: 37 kW / 400V / 50Hz Free air delivery: 5.10 m³/min (180 CFM) Max. working pressure: 10 bar (10.5 bar) Net weight: 880 kg Ljdpfx Aoz Anybencjag Dimensions: 1000×1250×1310 mm Motor: Smotor IE3, three-phase asynchronous, 2955 rpm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 349029, overall weight: 2,010 kg, noise level: 69 dB, Equipment: type plate available, Voltage: 400V Phase: 3 Frequency: 50 Hz Flow rate: 14.72 m³/min Speed: 3000 min⁻¹ Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: Air Stage pressure: 7.5 bar g Full load current: 169 A Laodpswrrn Dofx Ancjg The CompAir screw compressor L80-7.5A is a reliable and efficient solution for compressed air supply in various industrial applications. With its robust design and modern technology, this model ensures stable and continuous compressed air supply that meets the high requirements for performance and reliability. The compressor is characterized by its easy operation, low energy consumption, and minimal maintenance, making it an economical choice.