Used Air Pressure for sale (37,164)

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. Nsdpfx Asfz Ax Ssfzskt High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar. Nkedeflpmqspfx Afzjt

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit Nsdpjfzrapofx Afzekt • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. Nkedpfofz A D Njx Afzet High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: as good as new (ex-display), Year of construction: 2021, Cooling capacity: 26 kW Year of production: 2021 Country: manufactured in Italy Airflow: 5,000 m³/h Dimensions: 920 x 1120 x 720 mm Condition: very good, new Nkjdpjqrpihjfx Afzet Quantity of product: 4 pcs. Working temperatures of the AHU: -40/+70 °C Clivet AQX10, 26 kW (Year of manufacture – 2021), quantity 1 pcs. – 920 x 1120 x 720 mm, Airflow(2.5 m/s) – 5 000 m³/h

Condition: excellent (used), functionality: fully functional, mileage: 1,035,000 km, power: 426.59 kW (580.00 HP), first registration: 03/2019, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: intarder, color: blue, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, airbag, navigation system, onboard computer, parking heater, spoiler, MAN TGX 18.580 D 38 Full Air Suspension - First registration: 03/2019 - Mileage: 1,035,000 km - Retarder: Intarder - ADR AT - Stationary air conditioning - Navigation system - LED headlights - Dual fuel tanks - Two bunk beds - Tyres: 50% remaining FINANCING OR CUSTOMIZED LEASING OPTIONS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES LOCATION DOMENICO ESPOSITO S.P.A., EBOLI (SA) LOCATION – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL & MAXUS CONTACTS: Nksdjwgy H Rspfx Afzet 0823 1686306 335 6713062 – 377 7064530 BRANCH OPENING HOURS: MONDAY–FRIDAY 8:30–19:00 – SATURDAY 8:30–14:00 WE OFFER A WIDE RANGE OF USED COMMERCIAL/INDUSTRIAL MULTIBRAND VEHICLES: Fiat – Hyundai – Daf – Mercedes-Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500 – V8 – 650 – 580 – 730 – S500 S – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S Semi-trailer – Refrigerated Tank Semi-trailer – Lamberet – Schmitz – Isuzu – Fixed Body – Crane – Tipper – 4 axles – 4 Rear Axles – Tway – T-Way – 540 – 460 HP – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition Curtainsider – Box – Tail-lift – Refrigerated body – Insulated with fridge – Van Domenico Truck srl declines all responsibility for any discrepancies in technical specifications, optional equipment, and features, which in some cases may differ from those indicated in the description. We recommend checking the specifications of the individual vehicle.

Year of construction: 2014, condition: good (used), power: 260 kW (353.50 HP), color: yellow, machine/vehicle number: 214034, Painting-drying booth with semi-vertical air flow "ITALO-1-SV", brand Lackro, manufacturer Eco-Air Technology S.R.L. Italia, year of manufacture: 2014 Cabin interior dimensions: length 14.06 m X width 5.04 m X height 4 m, maximum air flow: 40-45000 mc/h, thermal power: 260 Kw, fuel: diesel, installed electric power: 26 Kw three-phase, tank fuel included, the cabin has a special lighting system, 30 superior filter cells for purification with carbon, dimensions: 500x500x50 mm, side service door, two central hinged doors, trolley for parts, burner chimney on diesel, the cabin has the user and maintenance manual Attention customers: this cabin will be delivered disassembled and loaded for transport from our company headquarters in Oradea. Nedpfop S Tlhsx Afzjkt Industrial drying painting cabin "ITALO-I-SV" MOD. ECO – L=14,060 mm x w=5,040 mm x H=4,000 mm with semi-vertical air flow Suction group Suction and filtration unit ECO-SM-5 Maximum air flow at 250 Pa m3/h 40,000-45,000 Maximum thermal power kW 260 VATRA 232 Fuel type DIESEL Installed three-phase electric power: kW (2x7.5) +(2x5.5) Filter cells 500 mm x 500 mm x 500 mm 30 pieces Bag filter Ǿ 280 x 1000 mm pieces 10 Ceiling grid 975 x 1855 mm 28 pieces Generator pre filters 1,000 mm x 800 mm x 50 mm pieces 2 Andreae suction wall filter 0.9 m x 5 m pieces 3 The maximum size of the piece in the cabin L=12 m x w=3 m x H= 3.2 m For any details, do not hesitate to contact me by phone. Price 79.900 Euro + VAT, Ex Works Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2024, condition: ready for operation (used), functionality: fully functional, overall weight: 3 kg, machine/vehicle number: 202427010, Equipment: documentation/manual, Biomechanical exoskeleton for lower back relief! Nsdpfsx Irzijx Afzskt TECHNICAL DETAILS Lumbar spine load reduction: up to 56–75% Back relief: up to 15 kg Donning time: under 20 seconds MACHINE DETAILS Weight: < 3 kg EQUIPMENT One size with individually adjustable assistance levels

Condition: used, Used Schenk model ZHF-S70-Z-C3 stainless steel pressure leaf filter. Unit measures approximately 2400mm straight side X 1350mm diameter. Has (60) 1200mm diameter horizontal filter/scavenge elements on 30mm spacing. Total approximately 70 square meter filtration area with approximately 1850 litre cake capacity. Filter elements bottom driven by a Hydrokraft model PVG 130-ES/11 hydraulic drive with a 37 kW, 415 volt, 1400 rpm, 3 phase, 50 HZ motor. Unit has an approximately 200mm slurry outlet. Welded dished bottom and clamped dished top head. Approximately 4300 litre capacity rated 9 bar design pressure at 20°C. Material of construction 321/304 stainless steel. Mounted on (3) legs. Also includes a 3000 litre 304 stainless steel Kieselguhr discharge tank rated 0.5 bar at 20°C. And a Kieselguhr Dosing tank with a 2-tier 2-blade pitched paddle type agitator driven by a 1.1 kW motor. Dosing tank includes feed pump driven by a 1.4/1.8 kW, 415 volt, 1410/2870 rpm, 3 phase variable speed motor. Nkedpfoyanvrex Afzjt

Condition: used, power: 2 kW (2.72 HP), color: black, overall weight: 120 kg, Year of construction: 2018, Air output: 32200 m3/h Speed: Variable Nodsyddnrspfx Afzskt Waterreservoir: 180 L Noise: 50db~70db Dimensions (cm): 186(H)×155(W)×81(D)cm Weight: 120 kg Power consumption: 1.35 kw ( 1250Watt ) If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Memmert Model: Memmert UF750plus Description: For sale is a Memmert UF750plus universal cabinet/drying oven in a high-quality industrial design. This unit is ideally suited for drying, heating, tempering, aging, burn-in, curing, and testing of materials in laboratories, industry, research, and quality assurance. Equipped with the Memmert ControlCOCKPIT TwinDISPLAY control system, the chamber offers precise temperature regulation up to 300 °C, uniform air circulation, and comprehensive safety and alarm functions. The entire interior is made of stainless steel, easy to clean, and engineered for heavy-duty use. The unit is mobile, robust, and designed for continuous professional operation. Technical data (UF750plus) General Manufacturer: Memmert Model: UF750plus Type: Universal drying oven Internal volume: approx. 749 liters Max. temperature: +300 °C Temperature range: +20 °C to +300 °C (at least 10 °C above ambient temperature) Controls & Technology ControlCOCKPIT TwinDISPLAY (2 TFT color displays) PID microprocessor control 2× Pt100 temperature sensors (DIN class A) Timer: 1 minute to 99 days Electronically controlled forced-air circulation Nkodpfeyc Swxjx Afzet Electronically adjustable exhaust flap Ethernet & USB interface (AtmoCONTROL) Multi-level safety monitoring (TWW / TWB / AutoSAFETY) Electrical data Connection: 400 V three-phase (3×230 V + N + PE) Frequency: 50/60 Hz Power consumption: approx. 7 kW Rated current: approx. 10.1 A Dimensions External dimensions (W × H × D): 1224 × 1720 × 784 mm Internal dimensions (W × H × D): 1040 × 1200 × 600 mm Shelves: up to 14, 4 wire shelves included Load capacity: per shelf: 30 kg total: 300 kg Weight Net weight: approx. 217 kg Gross weight (with packaging): approx. 288 kg Other features Stainless steel internal chamber Mobile on castors (lockable) Made in Germany Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors! Data subject to change.) For further questions, please call us.

Condition: used, Year of construction: 2009, Overview  This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data  Years of Manufacture: 2009 – 2013 Application: Industrial compressed air system Total Capacity: 2 × 24.1 m³/min Maximum Pressure: 8.5 bar Power Supply: 274.8 kW Scope of Delivery  Compressor | Atlas Copco | GA132 VSD | 2013 Compressor | Atlas Copco | GA132 VSD | 2012 Air dryer | Atlas Copco | FD160 VSD | 2012 Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009 Nedpfx Afjxrc Acszjkt

Condition: used, Year of construction: 2012, Overview This industrial air dryer was manufactured in 2012 by the Swedish company Atlas Copco. The FD760 VSD model is a refrigeration-type dryer designed for continuous operation in compressed air systems up to 14 bar, with a maximum flow capacity of 760 L/s. The unit is still installed and connected, has been regularly maintained, with the latest maintenance completed in August 2025, and is in excellent operating condition. It is immediately available and can be inspected on site. Technical data  Application: Air dryer for 7 7-bar low-pressure compressor Flow Capacity: 760 L/s Operating Pressure: Up to 14 bar Power Supply: 5.6 kW Refrigerant: R410A Weight: 380 kg Nksdpfx Asxrnn Dsfzjt

Condition: used, tank capacity: 313 l, GENERAL Design: upright Notes: 3-legged frame, steel (painted; 1 leg shortened); clamp screws steel (with signs of corrosion) Internal diameter: 700 mm Total height: 3,050 mm Heating/Cooling: present Power: 4 kW Max. allowable operating overpressure: 10.0 bar Max. overpressure: 3.00 bar Top cover: removable / liftable top cover Agitator: anchor agitator Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Volume: 313 liters Jacket volume: 90.0 liters Jacket material: V2A 1.4301 (AISI 304) Product-contact material: V4A 1.4439 (AISI 316) Condition: used Cylindrical height: 630 mm Previous use: chemicals VESSEL Support type: frame HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole / Dome: handhole Nodpfsxqbbhsx Afzokt Outlet: present Note: slight residues AGITATOR Voltage Volts: 220/380 Volts Agitator arrangement: centrally mounted on the top cover

Condition: used, tank capacity: 630 l, GENERAL Design: suspended Remarks: Support ring and vessel flange made of Fe; handhole cover plated Internal diameter: 1,000 mm Total height: 2,000 mm Heating/cooling: available Max. admissible operating temperature: 300 °C Max. admissible operating overpressure: 32.0 bar Max. overpressure: 6.00 bar Top cover: removable / hinged top cover Agitator: anchor agitator Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 630 liters Jacket volume: 14.5 liters Cylinder wall thickness: 7.8 mm Jacket material: V4A 1.4571 (AISI316) Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 800 mm Previous application: chemical industry VESSEL Max. admissible operating temperature: 300 °C Stand type: ring HEATING/COOLING JACKET Nedpfsxqba Dex Afzokt Bottom temperature control: half-pipe coil EQUIPMENT Manhole/Dome: handhole Outlet: flange DN50 AGITATOR Agitator arrangement: centrally mounted on top cover Agitator equipment: motor/gear unit missing TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 15.3 mm Top cover wall thickness: 15.8 mm

Condition: used, tank capacity: 1,150 l, GENERAL Equipment: Crane lugs Design: hanging Remarks: Halar coating inside (very good resistance to acids, alkalis, and solvents); no nameplate available; several connections have been modified by the previous operator, including one new outlet that was welded in (no coating in the weld area of the bottom plate and in the new outlet itself; no coating on the manway cover either); 5-legged frame made of Fe (galvanized; one leg slightly bent) Outer diameter: 1,250 mm Inner diameter: 1,100 mm Overall width: 1,660 mm Overall height: 2,600 mm Overall length: 1,850 mm Heating/cooling: available Insulation: available Nedpfx Aexqbakofzokt Max. overpressure: 0.60 bar Top head: bolted cover Agitator: agitator flange Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Vacuum: 1.00 bar Volume: 1,150 liters Cylinder wall thickness: 4.0 mm Jacket material: V4A 1.4571 (AISI316) Product contact material: Halar E-CTFE coating Condition: used Cylindrical height: 870 mm Previous application: gasoline TANK Max. permissible operating temperature: 120 °C Support style: frame HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation shell: bolted Insulation shell material: aluminum EQUIPMENT Manhole / dome: on top head (DN 400) Outlet: flange DN100 Note: minor residues, dents on insulation shell MATERIAL SPECIFICATION Head material: AISI316 (V4A) 1.4571 Cylinder material: AISI316 (V4A) 1.4571 AGITATOR Agitator arrangement: eccentric in top head TECHNICAL DATA / DIMENSIONS Head wall thickness: 4.0 mm

Condition: used, tank capacity: 720 l, GENERAL Equipment: crane lugs Design: suspended Remarks: 3 feet made of Fe; bolts for the top flange mostly missing Internal diameter: 790 mm Total height: 2,250 mm Heating/cooling: present Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 2.00 bar Top closure: bolted lid Agitator: beam agitator Location: Bremen Cylinder jacket temperature control: half-pipe coil Nameplate: Volume: 720 liters Double jacket volume: 52.0 liters Cylinder wall thickness: 6.2 mm Double jacket material: V4A 1.4401 (AISI316) Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,220 mm Last application: chemicals VESSEL Max. permissible operating temperature: 150 °C Support type: feet HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Outlet: available Note: motor/gearbox missing AGITATOR Baffle: Agitator arrangement: centrally mounted on top cover TECHNICAL DATA / DIMENSIONS Nkedpfx Aoxqa U Hjfzst Bottom wall thickness: 5.9 mm Top cover wall thickness: 8.2 mm

Condition: used, tank capacity: 1,333 l, GENERAL Design: vertical Notes: Handhole DN 200 Speed: 49 rpm External diameter: 1,250 mm Internal diameter: 1,188 mm Total height: 2,850 mm Heating/Cooling: equipped Power: 0.75 kW Max. permissible operating temperature: 143 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 3.00 bar Nksdpfx Asxqa Ugofzjt Top cover: removable/top-hinged Agitator: beam agitator Location: Bremen Technical documentation: drawing of a similar vessel Cylinder temperature control: double jacket Nameplate: Vacuum: 1.00 bar Volume: 1,333 liters Double jacket volume: 100.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contacting material: V4A 1.4571 (AISI316) Condition: used Previous application: pharmaceutical VESSEL Max. permissible operating temperature: 143 °C Base design: height-adjustable feet Number of feet: 3 HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Manhole / Dome: handhole Outlet: available Note: slight residues/adhesions MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR Voltage: 220/380 Volts Agitator arrangement: centrally in the top cover

Condition: used, tank capacity: 2,130 l, GENERAL Equipment: spray head, crane lugs Design: vertical Remarks: Total height including base platforms and motor cover; double outlet pipe inner diameter approx. 35 mm; insulation jacket with minor damage; one crack at the upper double jacket connection Speed: 201 rpm External diameter: 1,500 mm Internal diameter: 1,260 mm Total height: 4,050 mm Heating/cooling: available Insulation: available Power: 4 kW Max. permissible operating temperature: 140°C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 3.00 bar Agitator: inclined blade agitator Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.00 bar Volume: 2,130 liters Double jacket volume: 400.0 liters Product contact material: V4A 1.4401/04 (AISI316) Condition: used Last intended use: pharmaceutical VESSEL Max. permissible operating temperature: 140°C Support type: feet HEATING/COOLING JACKET Nksdpfoxqa Uasx Afzjt Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in top head (Ø 450 mm) Outlet: available MATERIAL CHARACTERISTICS Inner surface: ground Temperature control system material: V2A 1.4301 (AISI304) Foot material: stainless steel AGITATOR Voltage: 230/400 V Agitator arrangement: centrally mounted on top head

Condition: used, tank capacity: 650 l, GENERAL INFORMATION Equipment: Spray head Design: upright Remarks: Metallic discoloration on the inside Speed: 1415 rpm Outer diameter: 1,040 mm Inner diameter: 900 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 2,380 mm Heating/Cooling: present Insulation: present Power: 1 kW Max. permissible operating temperature: 170 °C Max. permissible operating overpressure: 8.0 bar Max. overpressure: 1.50 bar Agitator: Propeller Location: Bremen Technical documentation: Drawing, acceptance certificate Cylinder temperature control: Half-pipe coil Nameplate: Volume: 650 liters Cylinder wall thickness: 6.0 mm Double jacket material: V2A 1.4301 (AISI304) Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 900 mm Previous application: Pharmaceuticals VESSEL Max. permissible operating temperature: 170 °C Base design: on feet Number of feet: 4 HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel FITTINGS Manhole / dome: in the top lid (DN 400) Discharge outlet: 25 mm MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR Voltage: 220/380 Volt Agitator position: eccentric, in top lid TECHNICAL DATA / DIMENSIONS Nkodpfxsxqa T Nj Afzot Base wall thickness: 5.0 mm

Condition: used, tank capacity: 265 l, GENERAL INFORMATION Design: vertical Remarks: Cone height approx. 1200 mm; handhole approx. 220 x 315 mm; handhole collar and handhole cover made of Fe; one vessel is missing the handhole cover; handhole cover fastenings are incomplete on the other vessels Speed: 90 - 546 rpm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 3,350 mm Heating/cooling: available Power: 1.5 kW Max. permissible operating temperature: 100 °C Max. permissible operating overpressure: 0.49 bar Max. overpressure: 20.5 bar Agitator: propeller Location: Bremen Nkodpfxexqa T Ae Afzet Nameplate: Volume: 265 liters Double jacket volume: 25.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: steel alloys VESSEL Max. permissible operating temperature: 100 °C Lower head: conical bottom Support type: on feet Number of feet: 4 pcs HEATING/COOLING JACKET Lower head temperature control: double jacket EQUIPMENT Manhole/dome: handhole Outlet: available Note: slight residues MATERIAL SPECIFICATION Feet material: steel AGITATOR Voltage: 290/500 V Agitator arrangement: eccentric in upper head Agitator equipment: 1 agitator 59 - 363 rpm

Condition: used, tank capacity: 280 l, GENERAL Design: vertical Remarks: No warranty on the functionality of the jacket and agitator (not tested) Outer diameter: 780 mm Inner diameter: 600 mm Heating/cooling: available Insulation: available Max. overpressure: 2.5 bar Agitator: disc agitator Agitators: 1 agitator Location: external storage Nkjdpfsxqa Tvjx Afzjt Volume: 280 litres Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,000 mm VESSEL Bottoms: Klöpper bottom Mounting type: height-adjustable feet Number of feet: 3 pieces EQUIPMENT Outlet: 32 mm MATERIAL PROPERTIES Feet material: stainless steel

Condition: used, tank capacity: 3,685 l, GENERAL INFORMATION Design: suspended Remarks: 4 lugs made of steel; 1 vessel with insulation (insulating shell made of steel, painted; external diameter approx. 1780 mm) Speed: 347 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Overall height: 3,650 mm Heating/cooling: available Power: 1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.2 bar Shaft seal: Mechanical seal with thermosiphon vessel Agitator: Propeller Location: Bremen Technical documentation: Drawings, TÜV certificates Cylinder temperature control: Half-pipe coil Nameplate: Nkodpfx Aexqa Tpefzst Vacuum: 1.0 bar Volume: 3,685 liters Jacket volume: 65.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Last intended application: Chemical industry VESSEL Max. permissible operating temperature: 200 °C Support type: Lugs HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Base temperature control: Half-pipe coil EQUIPMENT Manhole/dome: on top head (DN 500) Discharge: Flange DN80 Note: slight adhesions, metallic discolorations inside MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) AGITATOR Agitator manufacturer: Stelzer Voltage: 500 V Agitator arrangement: eccentric on top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm Top head wall thickness: 7 mm

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed McD factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Nodpfx Aex Altfofzokt Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Please note that the photos probably show two different ovens, both are very similar.

Condition: good (used), mileage: 698,937 km, power: 338 kW (459.55 HP), first registration: 05/2019, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2019, Equipment: AdBlue, EBS, air conditioning, cruise control, electric window regulation, fog lights, fridge, parking heater, power mirror, second fuel tank, Axle configuration Nkodpfsycgivex Afzst Brakes: disc brakes Suspension: air suspension Front axle: Steering Rear axle: Double wheels Weights Empty weight: 7.449 kg Carrying capacity: 13.051 kg GVW: 20.500 kg Maintenance, history and condition APK (MOT): tested until 05/2026 Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information