Used Maximum Pressure for sale (24,384)

Condition: used, Year of construction: 2011, operating hours: 8,176 h, functionality: fully functional, machine/vehicle number: WPUD500H0B2000955, operating pressure: 500 bar, total length: 3,650 mm, high-pressure hose length: 50,000 mm, total width: 2,070 mm, pressure: 500 bar, empty load weight: 1,630 kg, input voltage: 12 V, fuel: diesel, overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 34.5 kW (46.91 HP), DGUV certified until: 10/2026, Dynajet 500TH 30 l/min Maximum pressure: 500 bar Knodpfxoz Egw Uo Aqrjc 8176 operating hours Regularly maintained, recently serviced, not in operation during winter (only April–October) Owned by the same operator since new For cold water only; can be retrofitted for heating water.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation Knjdpfx Aszgq Szjqrsc

Condition: used, Year of construction: 2011, operating hours: 3,690 h, functionality: fully functional, machine/vehicle number: W09D500THBAD43025, operating pressure: 500 bar, total length: 3,695 mm, high-pressure hose length: 50,000 mm, total height: 2,026 mm, total width: 2,050 mm, pressure: 500 bar, empty load weight: 1,695 kg, input voltage: 12 V, fuel: diesel, heating capacity: 115 kW (156.36 HP), overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 32.4 kW (44.05 HP), temperature: 150 °C, DGUV certified until: 11/2028, Dynajet 500TH 28 l/min at cold water Maximum pressure: 500 bar Ksdpoz Eg Dhsfx Aqrjnc 3695 operating hours Recently serviced Imported to Sweden in 2026 WITH HOT WATER UP TO 150°C!!!

Condition: like new (used), Year of construction: 2016, functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 230 kg, temperature: 140 °C, The MH-8P 180/2000 model is ideal for medium-sized and large industrial facilities where cleanliness is a top priority. The hot water cleaner is also successfully used in transportation companies, auto repair shops, and agriculture. It is also popular with private customers who value the highest cleaning quality. Hot water cleaners are particularly recommended for areas with grease or oil contamination. Water temperatures above 70°C enable dirt removal up to five times faster than cold water cleaners! Technical Specifications: Model: MH-8P 180/2000 Manufacturer: NILFISK Condition: Display Unit Year of Manufacture: 2016 Power Supply (~/V/Hz): 3 / 400 / 50 Pump Output (l/h): 2000 Operating Pressure (bar): 180 Maximum Pressure (bar): 250 Maximum Water Temperature (°C): 70–140 Connected Load (kW): 12 Power Cable (m): 5 Fuel Tank (l): 32 Chemical Tanks (l): 15+10 Weight (kg): 230 Dimensions (L x W x H) (mm): 1190 x 702 x 1020 Equipment: High-Pressure Gun: Nilfisk Ergo 3000 – 250 bar – 150 °C High-pressure hose: Nilfisk Longlife DN10 – 500 bar – 155 °C Spray lance: Nilfisk Tornado 1120 mm – 300 bar with pressure regulation Nozzle: Flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt-removing power. External control panel: Wired Schneider Electric remote control for controlling machine functions without having to go to the machine. Key features: The easily accessible water filter protects the pump from impurities in the water. Water softening system protects the heating coil from limescale deposits. Convenient handles on the housing + integrated nozzle storage Open oil system – no operating time limit Two integrated chemical tanks allow the cleaning fluid to be dosed directly via the machine. Easy-to-read and intuitive control panel Knjdpfewqw Tpjx Aqroc The simple design and easy access to the individual components under the housing make the machine user-friendly and easy to maintain.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1873778, pressure: 4,000 bar, overall weight: 1,055 kg, Manufacturer: Uhde High Pressure Technologies GmbH Type: HPS 4022 Year of manufacture: 2015 Motor power: 22 kW Kedpfxjzz Achj Aqrenc Stroke length: 182 mm Plunger diameter: 19 mm Maximum flow rate: 2.3 l/min at 4000 bar

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, operating pressure: 70 bar, total length: 920 mm, total height: 1,050 mm, total width: 640 mm, pressure: 70 bar, type of input current: three-phase, overall weight: 105 kg, Fogging device CLENA SANICLEN XL MCM3500 Discontinued model, available at a reduced price! Data for motor-pump unit: • Water pressure 70 bar • Brass cylinder head and ceramic piston, 1450 rpm • 2.2 kW or 3 kW electric motor with 1450 rpm, 400 V, 50 Hz • Flow rate 15 L/min or 21 L/min Data for fogging fan: • Nozzle ring with 410 mm diameter and 30 nozzles • Adjustable tilt angle from 0-40° • Maximum coverage: 150 m² • Power: 2.2 kW, 2800 g/min • Fan jet: 21 m (without wind) • Noise: < 87 Lwa • Droplet size 24 μm Application areas: • Disinfection of large areas • Dust suppression • Cooling Knedpfx Asz Hyh Noqrsc • Pest control • Odor neutralization • Surface cleaning

Condition: new, functionality: fully functional, operating pressure: 165 bar, empty load weight: 222 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 155 °C, KRANZLE THERM 1165-1 TR TECHNICAL DATA: Model: KRANZLE THERM 1165-1 TR Kedoy Sf N Uepfx Aqrjnc Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 1165 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 155 Operating pressure (bar): 165 Maximum pressure (bar): 180 Connected power (kW): 6.4 / 5.0 Power cable length (m): 7.5 Weight with accessories (kg): 222 Fuel tank capacity (l): 35 Dimensions (L x W x H) (mm): 1050 x 800 x 1300 KRANZLE THERM 1165-1 TR pressure washer EQUIPMENT KRANZLE [123272] pressure gun (M22 / quick coupler) Spray lance: KRANZLE [12420] (quick coupler) 25° flat jet power nozzle [D2507]. Flat high-pressure jet with high surface coverage and good dirt removal power. Integrated pressure hose reel 20m Professional-grade pressure hose [443812] WHY CHOOSE THE KRANZLE THERM 1165-1 TR? The THERM 1165-1 TR is ideal for factories, workplaces, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the 1165-1 TR model suitable for use in a wide range of industries. Additional handles allow for transporting the unit with additional accessories. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. The standard equipment includes a high-pressure gun with lance, 20m high-pressure hose, hose reel, and a 25° power nozzle. The device also features a D12 quick-release coupling system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM 1165-1 TR RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires repetitive use. Additional handles allow for transporting the device with additional equipment. A brass pump head extends the device's service life. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. The standard equipment includes a high-pressure gun with lance, 20m high-pressure hose on a hose reel, and a power nozzle. The device also features a quick-release coupling system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Condition: new, functionality: fully functional, operating pressure: 195 bar, empty load weight: 222 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 155 °C, KRANZLE THERM 895-1 TECHNICAL DATA: Model: KRANZLE THERM 895-1 Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 895 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 155 Kodpfx Aqey R U D Ssrjnc Operating pressure (bar): 195 Maximum pressure (bar): 215 Connection power (kW): 6.4 Power cable length (m): 7.5 Weight with accessories (kg): 214 Fuel tank capacity (l): 35 Dimensions (L x W x H) (mm): 1050 x 800 x 1015 KRANZLE THERM 895-1 EQUIPMENT: KRANZLE [123272] pressure gun (M22 / quick coupler) Spray lance: KRANZLE [12420] (quick coupler) 25° flat jet power nozzle [D2507]. Flat high-pressure jet with high surface coverage and good dirt removal power. 10m Professional-Class Pressure Hose WHY CHOOSE THE KRANZLE THERM 895-1? The THERM 895-1 is ideal for factories, workplaces, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the 895-1 model suitable for use in a wide range of industries. Additional handles allow for transporting the unit with additional accessories. The brass pump head extends the unit's lifespan. A large water filter protects the pump from contaminants that may be present in the water. A high-pressure gun with lance, a 10m high-pressure hose, and a 25° power nozzle are standard. The device also features a D12 quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM 895-1 RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow for transporting the device with additional accessories. The brass pump head extends the device's service life. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. Standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, and a power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Condition: new, functionality: fully functional, operating pressure: 150 bar, empty load weight: 198 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 140 °C, KRANZLE THERM 1017 PRESSURE WASHER TECHNICAL DATA: Model: KRANZLE THERM 1017 Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 1000 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 140 Operating pressure (bar): 150 Maximum pressure (bar): 150 Connected power (kW): 5.5 Weight with accessories (kg): 193 Fuel tank capacity (l): 35 Dimensions (L x W x H) (mm): 1050 x 800 x 1015 KRANZLE THERM 1017 WASHER EQUIPMENT Knodpey R Tzpsfx Aqrsc KRANZLE pressure gun (M22 / quick coupler) Spray lance: KRANZLE (quick coupler) 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. 10m Professional-Class Pressure Hose WHY CHOOSE THE KRANZLE THERM 1017? The THERM 1017 is ideal for factories, workplaces, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the 1017 model suitable for use in a wide range of industries. Additional handles allow for transporting the device with additional accessories. The brass pump head extends the device's lifespan. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, and a 25° power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM 1017 RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow the device to be transported with additional accessories. The brass pump head extends the device's lifespan. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. Standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, and a power nozzle. The device also features a quick-connect attachment system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Condition: new, operating pressure: 165 bar, empty load weight: 222 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 155 °C, KRANZLE THERM 1165-1 TECHNICAL DATA: Model: KRANZLE THERM 1165-1 Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 1165 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 155 Operating pressure (bar): 165 Maximum pressure (bar): 180 Connected power (kW): 6.4 / 5.0 Power cable length (m): 7.5 Weight with accessories (kg): 214 Fuel tank capacity (l): 35 Dimensions (L x W x H) (mm): 1050 x 800 x 1300 KRANZLE THERM 1165-1 WASHER EQUIPMENT KRANZLE Starlet [123272] pressure gun (M22 / quick coupler) Spray lance: KRANZLE [12420] (quick coupler) 25° flat stream power nozzle [D2507]. A flat high-pressure jet with high surface coverage and excellent dirt removal. 10m Professional-class, double-braided steel pressure hose [443812] WHY CHOOSE THE KRANZLE THERM 1165-1? The THERM 1165-1 is ideal for factories, workshops, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the 1165-1 model suitable for use in a wide range of industries. Additional handles allow for easy transport of the unit along with additional accessories. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. The standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, and a 25° power nozzle. The device also features a D12 quick-release coupling system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM 1165-1 RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires repetitive use. Additional handles allow for transporting the device with additional accessories. The brass pump head extends the device's service life. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. The standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, and a power nozzle. The 1165-1 model is equipped with a digital thermostat, flow sensor, overheating protection, and an operating hour meter. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded attachments. The device is completely new. Knedpfsy Sgdyex Aqrjc

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, empty load weight: 34 kg, fuel: super 95, warranty duration: 6 months, KARCHER HD 801 B COLD WATER PRESSURE WASHER This device features new accessories, including a pressure gun, stainless steel lance, steel braided hose, and adjustable nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. The highly efficient Honda GX160 combustion engine ensures stable operation even during prolonged use. With operating parameters of 150 bar and 650 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power: Petrol Engine: Honda GX 160 Flow rate [l/h]: 650 Working pressure [bar]: 150 Maximum pressure [bar]: 160 Weight [kg]: 34 Kodpexrtctjfx Aqrsnc Dimensions (L x W x H) (mm): 1044 x 542 x 662 Hose length [m]: 10 EQUIPMENT: NEW durable pressure gun NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW adjustable nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE

Condition: new, operating pressure: 180 bar, empty load weight: 164 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 150 °C, KRANZLE THERM C 13/180 TECHNICAL DATA: Model: KRANZLE THERM C 13/180 Manufacturer: KRANZLE Catalog number: 626200 Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 780 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 150 Kedsy Sgkyjpfx Aqronc Operating pressure (bar): 180 Maximum pressure (bar): 200 Connected power (kW): 4.8 / 4.0 Weight with accessories (kg): 164 Fuel tank capacity (l): 25 KRANZLE THERM C 13/180 WASHER EQUIPMENT KRANZLE M2000 pressure gun (M22 / quick coupler) [12492] Spray lance: KRANZLE (quick coupler) [12420] 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. [D25045] 10m Professional-Class Pressure Hose [44878] WHY CHOOSE THE KRANZLE THERM C 13/180? The THERM C 13/180 model is ideal for factories, workplaces, and industrial halls. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the C 13/180 model suitable for use in a wide range of industries. Additional handles allow for easy transport of the unit with additional accessories. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. A high-pressure gun with lance, a 10m high-pressure hose, and a 25° power nozzle are standard. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM C 13/180 RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow for transporting the device with additional accessories. The brass pump head extends the device's lifespan. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. Standard equipment includes a high-pressure gun with lance, a 15m high-pressure hose on a reel, and a power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Condition: used, Year of construction: 2019, operating hours: 196 h, functionality: fully functional, machine/vehicle number: W09D013KWKAD43636, operating pressure: 500 bar, total length: 2,910 mm, high-pressure hose length: 500 mm, total height: 1,770 mm, total width: 1,720 mm, pressure: 500 bar, empty load weight: 760 kg, fuel: diesel, heating capacity: 115 kW (156.36 HP), overall weight: 760 kg, water tank capacity: 300 l, fuel tank capacity: 70 l, power: 13 kW (17.68 HP), temperature: 95 °C, volume flow: 0.9 m³/h, noise level: 104 dB, pressure (max.): 500 bar, Equipment: chassis, crane, This well-maintained DYNAJET 500th 15 HELI hot and cold water high-pressure unit is available for immediate delivery. Manufactured in 2019 and having only 196 operating hours, the machine is in excellent condition and is being delivered fully serviced, fully functional, and ready for operation. Designed for demanding industrial cleaning applications, the DYNAJET 500th 15 HELI combines powerful cleaning performance with compact dimensions, low weight, and excellent mobility. With an operating pressure of up to 500 bar and hot water temperatures up to 95°C, the machine is ideally suited for removing heavy contamination, coatings, grease, and industrial residues. The unit is equipped with a reliable Kubota diesel engine, integrated hot water system, and a large 300-litre water tank for independent operation even where external water supply is limited. The trailer-mounted design ensures maximum flexibility and easy transportation between jobsites. To ensure many years of reliable operation, the machine will be supplied with a brand-new 50 m high-pressure hose. A turbo nozzle and standard flat-jet nozzle are included in the sale. Key features and advantages: Knjdpfez Nd Ndjx Aqroc * Year of manufacture: 2019 * Only 196 operating hours * Fully serviced before delivery * Fully functional and ready for operation * Maximum operating pressure: 500 bar * Flow rate: up to 15 l/min * Hot water temperature up to 95°C * Powerful Kubota 3-cylinder diesel engine * Integrated hot water system with high-performance burners * 300-litre integrated water tank * Approx. 70-litre fuel tank * Trailer-mounted unit with overrun brake * New 50 m high-pressure hose included * Turbo nozzle included * Standard nozzle included * Compact, robust and easy to transport *Ideal for industrial cleaning, surface preparation and professional service applications Please contact us if you are interested or would like to receive further information, pricing details, additional photos, or arrange a viewing of the machine. We will be pleased to assist you.

Condition: used, GE Druck Modular High-Precision Pressure Controller / Pneumatic Pressure Controller PACE5000 Professional High-Precision Pressure Controller for calibration, pressure testing, automation, and laboratory applications For sale is a used high-precision pressure controller from the manufacturer GE Druck. The PACE5000 is a modular, high-precision pressure control system designed for the most demanding applications in calibration laboratories, research, development, production, and quality assurance. Due to its high control speed and precision, the device is ideally suited for automatic pressure tests, calibration tasks, and industrial measuring and testing systems. Technical data: Manufacturer: GE Druck (Baker Hughes) Model: PACE5000 Device type: Modular High-Precision Pressure Controller Pneumatic Control Module: CM0-B-16G Dimensions: approx. 440 × 88 × 320 mm (W × H × D) Kjdpfeziyqrex Aqrsnc Weight: approx. 10.1 kg Control range: -1 to 70 bar(g) Maximum permissible operating pressure (MWP): 94 bar Accuracy: up to 0.001% of the final value (model-dependent) Long-term stability up to 0.001% FV Features: Modular control system Very high pressure control speed Automatic pressure control Pressure testing Leak test function Burst test Switch test Programmable test sequences User-defined pressure units Display: Color touch display Graphical user interface Display of setpoint and actual value Intuitive menu navigation Interfaces: Ethernet USB Host USB Device RS-232 CAN IEEE-488 (GPIB) 24 V DC inputs/outputs Pneumatic connections: Supply Output Vent Reference G1/8" connection Power connection: 100–230 VAC 50–60 Hz Power consumption: max. 100 VA Application areas: Calibration laboratory Testing systems Quality assurance Automotive industry Aerospace Mechanical engineering Measurement technology Research & Development Automation technology Pressure sensor calibration Equipment: Color display Pneumatic Control Module Ethernet USB RS232 CAN IEEE-488 (GPIB) Pressure connections Power cable Accessories as shown in the pictures Scope of delivery: GE Druck PACE5000 Power cable Accessories as shown in the pictures Weight: approx. 10.1 kg Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age are present. The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping via parcel service or freight forwarder is possible. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone or e-mail.

Condition: used, Year of construction: 2015, operating hours: 5,201 h, functionality: fully functional, machine/vehicle number: W09HKF1011SHB8027, operating pressure: 550 bar, total length: 3,950 mm, high-pressure hose length: 50 mm, total height: 1,880 mm, total width: 1,870 mm, empty load weight: 1,200 kg, fuel: diesel, overall weight: 1,800 kg, water tank capacity: 500 l, noise level: 93 dB, DGUV certified until: 03/2027, Oertzen PT500 30 l/min Knodjz Ega Nopfx Aqrsc Maximum pressure: 500 bar 5200 operating hours Regularly maintained, recently serviced, not operated in winter (only April–October) Owned by the same operator since new For cold water only; heating element has been removed.

Condition: new, functionality: fully functional, operating pressure: 150 bar, empty load weight: 198 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 140 °C, KRANZLE THERM 1017 TR TECHNICAL DATA: Model: KRANZLE THERM 1017 TR Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 1000 Maximum water temperature (°C): max. 80 Knsdpfx Ajy R Tfhoqrjc Maximum steam temperature (°C): max. 140 Operating pressure (bar): 150 Maximum pressure (bar): 150 Connected power (kW): 5.5 Weight with accessories (kg): 198 Fuel tank capacity (l): 35 Dimensions (L x W x H) (mm): 1050 x 800 x 1300 KRANZLE THERM 1017 TR WASHER EQUIPMENT KRANZLE pressure gun (M22 / quick coupler) Spray lance: KRANZLE (quick coupler) 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. Integrated pressure hose reel 20m professional-grade pressure hose WHY CHOOSE THE KRANZLE THERM 1017 TR? The THERM 1017 TR is ideal for factories, workplaces, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the 1017 TR model suitable for use in a wide range of industries. Additional handles allow for transporting the unit with additional accessories. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes a high-pressure gun with lance, a 20m high-pressure hose, a reel, and a 25° power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM 1017 TR RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow for transporting the device with additional accessories. The brass pump head extends the device's lifespan. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. Standard equipment includes a high-pressure gun with lance, a 20m high-pressure hose reel, and a power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Condition: new, operating pressure: 275 bar, pressure: 275 bar, overall weight: 71 kg, PROFESSIONAL PETROL PRESSURE WASHER WITH BRASS PUMP – TECHKAR "G275" MODEL Operating parameters: 275 bar, 15 l/min Ksdpoz Dv Tcsfx Aqrjnc Product Description: We offer a professional petrol-powered pressure washer featuring a robust yet compact design and large pneumatic tires, ensuring convenient, efficient, and safe transport to locations where standard electric washers cannot be used. Thanks to its petrol engine and a pump capable of self-priming water from tanks, this unit operates independently of mains electricity and water supplies. It is ideally suited for various outdoor tasks, such as work on allotment gardens. High performance specifications—specifically a maximum pressure of 275 bar and a flow rate of 15 l/min—enable it to handle the vast majority of tasks required of pressure washers. Utilizing standard fittings (M22 thread and standard petrol washer quick-connectors), the unit can be expanded with a wide range of accessories, including brushes, lances, turbo nozzles, sandblasting kits, sludge removers, and T-Racer surface cleaners. The brass pump, equipped with a pressure regulation valve and a safety valve, ensures exceptional durability even under heavy workloads. We are the direct importer of TECHKAR "G275" pressure washers and maintain a continuous stock of service parts (pressure valves, pistons, seals, by-pass valve repair kits) and accessories (such as T-Racer patio cleaners, rotary nozzles, hoses, foam cannons, etc.). When you choose our product, you benefit from comprehensive service and post-warranty support. About the LIFAN brand: Lifan is one of the world's largest automotive companies. The enterprise manufactures motorcycles, passenger cars, trucks, and buses, as well as internal combustion engines and machinery. Founded in 1992, the company is headquartered in Chongqing. It successfully sells its products in highly developed nations—such as the UK, Germany, Australia, the USA, and Canada—where it enjoys an excellent reputation. Set contents: LIFAN 15 HP combustion engine Brass pump head 15m steel-braided hose with 3/8" quick-connectors High-pressure gun with 3/8" quick-connector Spray lance with quick-connector 0° point-jet nozzle 15° fan-jet nozzle 40° fan-jet nozzle Chemical application nozzle Garden hose quick-connector with metal pre-filter Honda oil supply (2 x 0.6L) Features and benefits: Brass pump head Crankshaft pump, 3-piston design Ceramic plungers Robust intake and discharge valves Thermal safety valve Chemical intake valve with hose and filter Additional BY-PASS pressure regulation valve Water connection for standard garden hose coupling Cover with oil drain opening Cover with built-in oil level sight glass Large pneumatic wheels Sturdy frame Technical specifications: Engine: LIFAN 15 HP combustion engine Starting system: Manual (recoil) Fuel consumption: ≤ 374 g/kWh Fuel tank: 6.5L Fuel type: Gasoline Pump head type: Brass, crankshaft-driven Intake/discharge pump: Yes Working pressure: 275 bar (4000 PSI) Maximum pressure: 300 bar (4400 PSI) Flow rate: 15 l/min (900 l/h) Weight: 71 kg Engine oil: SAE 10W30 Pump oil: SAE 15W40 Condition – new

Condition: new, operating pressure: 150 bar, empty load weight: 164 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 150 °C, KRANZLE THERM CA 12/150 TECHNICAL DATA: Model: KRANZLE THERM CA 12/150 Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 720 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 140 Operating pressure (bar): 150 Maximum pressure (bar): 150 Connected power (kW): 3.8 / 3.0 Weight with accessories (kg): 164 Fuel tank capacity (l): 25 KRANZLE THERM CA 12/150 WASHER EQUIPMENT Knjdpfx Asy Sgyuoqrjc KRANZLE pressure gun (M22 / quick connector) Spray lance: KRANZLE (quick connector) 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. 10m professional-class pressure hose WHY CHOOSE THE KRANZLE THERM CA 12/150 WASHER? The THERM CA 12/150 model is ideal for factories, workplaces, and industrial halls. It is also successfully used in large and small transport companies, automotive repair shops, and in agriculture. It is also used by private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the CA 12/150 model suitable for use in a wide range of industries. Additional handles allow the unit to be transported with additional equipment. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, and a 25° power nozzle. The device also features a quick-release attachment system, allowing for 5x faster attachment changes than traditional threaded systems. KRANZLE THERM CA 12/150 RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow the device to be transported with additional accessories. The brass pump head extends the device's lifespan. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. Standard includes a high-pressure gun with lance, a 15m high-pressure hose on a reel, and a power nozzle. The device also features a quick-connect accessory mounting system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Condition: new, operating pressure: 130 bar, empty load weight: 164 kg, input voltage: 230 V, warranty duration: 12 months, temperature: 140 °C, KRANZLE THERM CA 11/130 TECHNICAL DATA: Model: KRANZLE THERM CA 11/130 Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 1 / 230 / 50 Pumping capacity (l/h): 660 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 140 Operating pressure (bar): 130 Maximum pressure (bar): 145 Connected power (kW): 3.4 / 2.3 Weight with accessories (kg): 164 Fuel tank capacity (l): 25 KRANZLE THERM CA 11/130 EQUIPMENT KRANZLE pressure gun (M22 / quick connector) KRANZLE spray lance (quick connector) 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. 10m professional-class pressure hose KRANZLE external water filter Kodpjy Sg Swofx Aqrsnc WHY CHOOSE THE KRANZLE THERM CA 11/130? The THERM CA 11/130 model is ideal for factories, workplaces, and industrial halls. It is also successfully used in large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. A key advantage of this model is its power supply via a single-phase 230V socket, which translates into excellent mobility in terms of power supply points. The THERM line places a primary emphasis on smooth operation and continuous operation, making the CA 11/130 model suitable for use in a wide range of industries. Additional handles allow for transporting the unit with additional accessories. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, a 25° power nozzle, and an external water filter. The device also features a quick-connect attachment system, allowing for 5x faster accessory changes than traditional threaded systems. RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow the device to be transported with additional accessories. The brass pump head extends the device's lifespan. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. A high-pressure gun with lance, 10m high-pressure hose, and a Power nozzle are standard. The device also features a quick-connect accessory mounting system, allowing for 5x faster accessory changes than traditional threaded systems. Single-phase power supply (230V) The device is brand new.

Condition: used, Year of construction: 2020, operating hours: 555 h, functionality: fully functional, machine/vehicle number: 62006148, operating pressure: 1,000 bar, total length: 1,160 mm, high-pressure hose length: 1,000 mm, total height: 1,300 mm, total width: 800 mm, pressure: 1,000 bar, input voltage: 400 V, fuel: electricity, overall weight: 560 kg, water tank capacity: 20 l, power: 30 kW (40.79 HP), input current: 63 A, noise level: 104 dB, pressure (max.): 500 bar, input frequency: 50 Hz, Equipment: chassis, crane, Used DYNAJET 1000me 400V/50Hz/63A – 1000 Bar High-Pressure Water Jetting System – Only 555 Operating Hours This well-maintained DYNAJET 1000me high-pressure water jetting unit is available for immediate sale. With only 555 operating hours, the machine remains in excellent condition and is ready for demanding industrial cleaning and surface preparation applications. Delivering up to 1000 bar (14,500 PSI) and a flow rate of 17 l/min, the DYNAJET 1000me is designed for professional users who require maximum pressure performance combined with reliable day-to-day operation. The robust four-wheel trolley design ensures easy transportation and flexibility on site, while the industrial-grade construction provides outstanding durability even in harsh working environments. The machine is equipped with a powerful 30 kW electric motor, industrial crankshaft pump, stainless-steel water filtration system, operating-hours meter, automatic motor protection, and DYNAJET's innovative dry-stop pistol technology for improved operator safety and ease of use. Included with the machine: *1 x 1000 bar high-pressure gun *Nozzle holder *Rotating nozzle *High-pressure nozzle *10 m high-pressure hose *Original DYNAJET machine *Only 555 operating hours The DYNAJET 1000me is particularly suitable for: Industrial cleaning Surface preparation Coating and paint removal Concrete renovation work Ship and offshore maintenance Tank and container cleaning Heavy-duty maintenance applications Technical specifications: Knsdpfx Aqez Dgt Toroc *Working pressure: 1000 bar (14,500 PSI) *Flow rate: 17 l/min *Electric motor: 30 kW *Voltage: 400V / 50Hz / 63A *Pump type: Triplex plunger pump *Water tank: 20 L *Motor protection: IP54 *Dimensions (L × W × H): 116 × 80 × 130 cm *Weight: approx. 560 kg *Operating hours: 351 h *Key features and advantages: *Only 351 operating hours *1000 bar ultra-high pressure performance *Robust industrial trolley construction *High reliability and long service life *Electric drive with low operating costs *Included 1000 bar gun, nozzle holder, nozzle, and 10 m hose *Immediate availability *Fully functional and ready for operation Please contact us for additional information, photos, pricing, or inspection arrangements.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 230 bar, fuel: super 95, overall weight: 51 kg, warranty duration: 6 months, COLD WATER WASHER KARCHER HD 8/23 G NEW LIFAN 190 F (15KM) COMBUSTION ENGINE The device has new equipment, including a pressure gun, stainless steel lance, steel braided hose and adjustable nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient, new Lifan 190 F combustion engine ensures stable operation even with long-term use Thanks to the operating parameters of 230bar and 800l/h, the machine can be effectively used for heavy work in construction, the logistics industry and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply: Combustion Engine: LIFAN 190 F 15 HP Pressing capacity [l/h]: 800 Working pressure [bar]: 230 Maximum pressure [bar]: 280 Weight [kg]: 50.9 Ksdpfxswcmxxs Aqrjnc Dimensions (length x width x height) (mm): 878 x 538 x 702 Hose length [m]: 10 EQUIPMENT: NEW LIFAN 190 F (15HP) COMBUSTION ENGINE NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle GEKa water filter and claw couplings - FREE KEY FEATURES: Open oil system - no operating time limit Very legible and intuitive control panel Simple design and good access to individual components under the housing makes the machine user-friendly and easy to service

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, empty load weight: 116 kg, input voltage: 400 V, warranty duration: 6 months, KARCHER HD 16/15-4 CAGE COLD WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 150 bar and 1600 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply (~/V/Hz): 3 / 400 / 50 Discharge capacity (l/h): 500 - 1600 Operating pressure (bar): 30 - 150 Maximum pressure (bar): 190 Connected power (kW): 7.5 Power cable (m): 5 Weight (kg): 116 Dimensions (L x W x H) (mm): 957 x 686 x 1080 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose Kodow S Ixkspfx Aqrjnc NEW power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Highly legible and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Large wheels facilitate transport over uneven terrain

Condition: used, This listing is for the Pendotech PMAT3 Pressure Mat Sensor Monitor The unit is in full working condition and is ready for immediate use The PendoTECH PressureMAT (PMA23/PMAT) is a dedicated pressure monitor, alarm, and transmitter designed specifically for use with PendoTECH’s single-use pressure sensors in biopharmaceutical and laboratory environments. Here's a breakdown of its key functions and features: What It Does Monitor: Displays real-time pressure readings (range from approximately –7 to 75 psi, or corresponding bar values) on a user-friendly backlit LCD for applications such as filtration, chromatography, and bioreactor pressure monitoring Alarm: Users can configure minimum and maximum pressure set-points. If readings fall outside these thresholds, the device triggers alarms—via on-screen warnings, audio alerts, and relay outputs to control external pumps or valves Transmitter: Delivers analog output signals (4–20 mA) and RS‑232 data outputs for integration into process control systems or PCs. Optional internal data logging may also be available Models & Capabilities Standard Units: Versions available for 1 to 4 pressure sensor inputs. Kodoxhfq Ispfx Aqrjnc High-Resolution (HR): Tailored for low-pressure applications, offering up to 10× better precision PLUS Series: More advanced models (e.g., PMAT2P, PMAT3P) support additional functionalities like flow meter inputs and total flow measurement, plus external analog input and broader integration options

Condition: used, This listing is for a Parker SciLog SciPres Pressure Monitor with Pressure Sensors. The unit is in full working condition and is ready for immediate release. This unit is supplied with 2x Scilog Scipress pressure sensors and cables. The Parker SciLog SciPres Pressure Monitor is an advanced monitoring solution tailored for biopharmaceutical applications. Designed to work seamlessly with single-use pressure sensors, this device enables real-time pressure monitoring and comprehensive data documentation, ensuring your processes run smoothly and efficiently. Key Features: - Pre-Calibrated Sensors: The SciPres pressure sensors are pre-calibrated for immediate use upon installation, eliminating setup time and ensuring accurate readings right out of the box. - Gamma-Stable Technology: Engineered to withstand gamma radiation sterilization, these sensors are perfect for environments requiring stringent sterilization protocols. - Robust Data Storage: Each sensor is equipped with a dedicated chip that stores crucial calibration and sensor-specific information, supporting traceability and data integrity. - Versatile Size Options: Available in five sizes to accommodate various tubing configurations, including Luer, 3/8" barb, 1/2" barb, 3/4" Tri-Clover, and 1" Tri-Clover Ladish, ensuring compatibility with your existing systems. - Real-Time Monitoring: The SciPres pressure monitor supports up to three pressure sensor inputs simultaneously, displaying transmembrane pressure (TMP) and differential pressure (dP) for comprehensive monitoring. - Max Pressure Watchdog: This safety feature records the maximum pressure detected, along with sensor ID and calibration info, providing critical data for overpressure prevention. - Software Integration: Connect the monitor to a PC using SciDoc software for automated real-time documentation of sensor data, enhancing data management and compliance. - Comprehensive Support: Enjoy extensive customer support to assist with any issues or queries you may encounter. Specifications: - Display: Backlit, user-friendly interface - Outputs: Analog and digital signals - Power Supply: Universal wall adapter included - Calibration Points: Supports multiple calibration configurations Applications: - Ideal for critical biopharmaceutical processes such as filtration, chromatography, reverse osmosis, fermentation, and use with bags and manifolds. The SciLog SciPres Pressure Monitor is your reliable partner for precise pressure management in a variety of settings. Kjdsxxx Ubepfx Aqronc

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK 500-litre pressure vessel, with a working and maximum allowable pressure of 11 bar, is designed for storing compressed air in industrial facilities, workshops, and pneumatic systems. The tank is made of galvanized steel sheet, providing an excellent protective barrier against external factors and corrosion and significantly extending the service life of the unit compared with standard painted tanks. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, it can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Features of the 500 L Galvanized Pressure Vessel Professional pressure-rated construction – made of high-quality 4 mm thick steel, resistant to pressure and corrosion. Galvanized finish – the tank surface is galvanized, providing an attractive appearance and high resistance to demanding conditions in workshops and production halls. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High 500-litre capacity – provides stable compressed air supply and reduces the frequency of compressor start-up cycles. Knsdpfx Ajzwlzfoqrsc Multiple connection ports – 6 connection ports with diameters of 1 1/4", 2", and 1/2" allow flexible connection to various installations. High-quality construction – durable galvanized external coating provides long-lasting protection. Space-saving vertical design – allows efficient use of available space in the workplace. Compliance with standards – the tank meets pressure equipment safety requirements and is suitable for registration with the Polish Office of Technical Inspection (UDT). Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 4 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a galvanized coating resistant to external factors and corrosion. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection ports: 6 pcs. – diameters 1 1/4", 2", and 1/2" Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating Technical Specifications Specification Value Weight 130 kg Number of connections 6 Connection sizes 1 1/4", 2", 1/2" Dimensions 2030 × 600 mm Tank capacity 500 L Working pressure 11 bar Maximum pressure 11 bar Wall thickness 4 mm Diameter Ø 600 mm Height 2030 mm